Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Specialty Metal Supply for Defense Components

Active

Federal

Response Deadline09/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of DFARS-compliant specialty metals, specifically high-strength alloys, designated for use in manufacturing military-grade microphone brackets. All materials must adhere to strict domestic sourcing requirements and maintain full traceability from origin through final delivery to ensure compliance with defense regulations. The procurement is structured as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the SBA, with the NAICS code 331110 indicating primary focus on steel manufacturing. The solicitation was posted on August 4, 2026, and responses are due by September 3, 2026, with performance tied to the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. While specific delivery locations and points of contact are not listed, the requirement mandates adherence to all applicable federal acquisition regulations regarding material origin, quality assurance, and documentation.

General Info

Small business supplies DFARS-compliant specialty metals for military microphone brackets under NAICS 331110, due September 3, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

331110 - Iron and Steel Mills and Ferroalloy ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineSep 3

Submission deadline

Response Deadline

09/03/2026, 05:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of DFARS-compliant specialty metals, including high-strength alloys, for use in the fabrication of military-grade microphone brackets, with full traceability and domestic sourcing compliance.

Similar Contracts

Same NAICS industry code

Solicitation # W911S226U3901

The contract titled STEEL PLATE under solicitation number W911S226U3901 is a total small business set aside with a North American Industry Classification System code of 331110, specifically targeting steel plate procurement. The response deadline has been corrected and extended to August 11, 2026, at 8:30 PM EDT, following the identification of an error in the originally posted date of August 3, 2026. The contract is classified as a combined solicitation and is managed by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York. The place of performance is associated with ZIP code 61299, though the specific city and state have not been detailed. All responses must be submitted by the revised deadline to be considered. The primary point of contact for inquiries is Cindy Jepsen, reachable via phone at 309-782-8389 or email at cindy.k.jepsen.civ@army.mil. The contract falls under the Small Business Administration set aside category, ensuring eligibility and preference are reserved for small businesses. Multiple CLINs are included under this solicitation, all subject to the total small business set aside designation, emphasizing the agency’s commitment to contracting with qualified small businesses for steel plate requirements. The official solicitation page can be accessed through the SAM.gov link provided for further details and submission instructions.

W6QM Micc-Ft Drum

POSTED

about 11 hours ago

DEADLINE

Specialty Metals and Materials ComplianceThe contract requires the sourcing and certification of specialty metals that comply with DFARS regulations, ensuring all materials are free from prohibited substances and come with fully traceable origin documentation. Suppliers must demonstrate strict adherence to requirements governing the origin and processing of specialty metals, with emphasis on verified supply chain integrity and material transparency to meet federal defense standards. The effort is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses meeting SBA criteria, and falls under the NAICS code 331110 for iron and steel mills and ferroalloy manufacturing. Performance is expected to be delivered to Tracy, California, with a response deadline of August 18, 2026, and the solicitation was posted on August 3, 2026. The contracting activity is managed under the Department of Defense through the LAND SUPPLIER OPNS VEHICLE SPT office, and compliance with all regulatory and documentation requirements is mandatory for award consideration. All submissions must align with the stringent traceability and certification protocols outlined in the solicitation to qualify for contract award under this defense procurement initiative.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Raw Material Supply for Aerospace ComponentThe contract calls for the supply of certified, domestically sourced raw material in the form of bar stock or billet, made from high-performance alloys that meet stringent aerospace specifications for use in the piston-shaft component. All materials must adhere to defined quality and traceability standards, ensuring they are produced entirely within the United States to support defense supply chain resilience. The materials are intended for critical applications where performance, consistency, and reliability are non-negotiable, and compliance with industry-specific aerospace requirements is mandatory. This is a subcontract under the Department of Defense’s Maritime Supply Chain initiative, with performance required at Tinker AFB, Oklahoma, 73145-9031. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026. The NAICS code 331110 identifies the primary industry as Iron and Steel Mills and Ferroalloy Manufacturing, emphasizing the need for specialized metallurgical capabilities. Suppliers must demonstrate proven ability to deliver certified materials under tight quality controls, with full documentation of source, heat lots, testing, and certification, to support aerospace-grade assembly and integration.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE8E9-26-T-3200

The contract specifies the procurement of corrosion-resistant metal steel plates meeting ASTM A240 Class 316L standards, with a thickness of 0.500 inches, width of 72 inches, length of 240 inches, and a reference weight of 2505.6 pounds per piece. The material must be hot rolled, annealed, and either sand blasted or pickled overall, delivered in whole-foot lengths only, and fully compliant with the Technical Data Package Rev B Gen 2, which incorporates referenced standards including MIL-STD-129R(3), ASTM A700-14, and SAE AMS2807C. All units must be permanently and legibly marked with the DLA contract delivery order number, NSN, specification revision, alloy designation, manufacturer’s name, heat and lot number, and dimensions using stenciling or stamping methods that do not contaminate the material. Markings must be waterproof, stable under normal handling, and applied both directly to the plate and on vinyl or plastic-coated pressure-sensitive labels. Each shipment must include a Certificate of Quality Compliance (Mill-Material Certification) delivered to the customer or DLA depot and forwarded to the Contracting Officer. Supply is restricted to vendors listed on the DLA Qualified Suppliers List for Distributors (QSLD); only approved distributors may supply the product, and deviations require explicit notification. Suppliers not on the QSLD are ineligible for award, and noncompliance may result in criminal penalties. The QSL program waives source inspection requirements for qualified suppliers, relieving obligations under RQ006, COQC, PVT, QAP-EQ003, and ASQ H1331. Packaging must strictly adhere to MIL-STD-2073-1E with packaging code U, preservation method ZZ as defined in ASTM A700, and palletization per RP001. Container requirements include robust four-corner protection, full-side edge coverage, and fiberboard or better top and bottom protection. Marking and packaging use special codes Z and ZZ that reference ASTM A700, and shipments must indicate both units of measure if applicable (e.g., FT-LB). Deliveries are FOB origin with a 167-day delivery window, final inspection and acceptance occurring at destination, and electronic invoicing mandatory through WAWF. Two distinct delivery locations are designated—Tracy, California and New Cumberland, Pennsylvania

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Raw Material Supply (Metal Alloys or Forgings)The contract seeks the supply of certified alloy steel, aluminum, or titanium forgings to be used in the manufacturing of aerospace access components, targeting high-performance applications within the defense sector. The materials must meet strict quality and certification standards appropriate for aerospace use, ensuring structural integrity and compliance with industry specifications. The procurement is structured as a subcontract under NAICS code 331110, indicating a focus on iron and steel mills and ferroalloy manufacturing, and is managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on August 3, 2026, with a firm response deadline of August 11, 2026, at 4:59 a.m. EST, leaving a limited window for qualified suppliers to submit proposals. There is no specified set-aside designation, meaning the opportunity is open to all eligible contractors regardless of size or certification status. The place of performance has not been detailed, suggesting delivery may be required to multiple or unspecified defense manufacturing sites under DoD oversight. Suppliers must be prepared to meet rigorous traceability, inspection, and documentation requirements for the certified metals to support aerospace certification and accountability processes.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Domestic Raw Material Supply (Steel Components)The contract is a total small business set-aside under the SBA program for the supply of domestically sourced steel stock to be used in the fabrication of rake tines and frames, ensuring full compliance with the Buy American Act and the Defense Federal Acquisition Regulation Supplement. The procurement is classified under NAICS code 331110, indicating it falls within the Iron and Steel Mills and Ferroalloy Manufacturing sector, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The opportunity was posted on August 2, 2026, with responses required by August 13, 2026, and is structured as a subcontract, emphasizing that the work must be performed by a small business entity that meets all eligibility and sourcing requirements. All materials must originate and be processed within the United States to satisfy domestic sourcing mandates, and performance is expected to support defense-related fabrication needs without specifying a geographic location beyond federal compliance standards.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Raw Materials – Steel or Aluminum StockThe contract entails the supply of military-grade steel or aluminum angle bar stock specifically for use in the fabrication of angle brackets, with strict requirements for material traceability and certified documentation to ensure compliance with defense standards. The materials must meet stringent quality and performance specifications to support reliable structural applications in defense-related assemblies, and the supplier is responsible for providing full material certification and chain-of-custody records throughout production and delivery. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with a NAICS code of 331110 indicating primary focus on steel mill and ferroalloy manufacturing. The solicitation was posted on August 1, 2026, and performance is expected to align with defense supply chain protocols, although specific delivery location details are not provided. The contract emphasizes adherence to military-grade material standards and full traceability, ensuring that all components can be verified and audited for compliance with federal defense requirements.

Defense Logistics Agency

POSTED

DEADLINE

Specialty Metal Material SupplyThe contract involves the supply of defense-grade raw metal tubing or bar stock that must comply with DFARS and military material specifications, intended for use in the production of tube assemblies. The materials are required to meet stringent defense standards to ensure performance, durability, and compatibility within military applications. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with the North American Industry Classification System code 331110 indicating integration into the primary metals manufacturing sector. The contract was posted on July 31, 2026, and while specific location details are not provided, performance is expected to support defense-related manufacturing requirements across the U.S. military supply chain. The absence of a set-aside designation suggests this opportunity is open to all qualified vendors capable of meeting the technical and regulatory demands of defense-grade metal fabrication.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Aerospace ForgingsThe contract entails the supply of certified high-performance alloy billets or preforms, including materials such as Inconel 718 and Waspaloy, specifically for use in aerospace forging applications. All materials must meet stringent aerospace material specifications and come with full traceability from raw source through final delivery, ensuring compliance with industry and regulatory standards. The products are intended for critical components where material integrity and consistency are paramount, requiring rigorous documentation and quality assurance protocols throughout the production and shipment process. This is a subcontract under the Department of Defense, managed by Ok DLA Aviation in Oklahoma City, with a solicitation posting date of July 31, 2026, and a response deadline of August 31, 2026. The North American Industry Classification System code 331110 identifies the primary industrial category as iron and steel mills and steel product manufacturing. The contract does not specify a set-aside type or location details, but performance is expected to support defense-related aerospace manufacturing requirements. Interested suppliers must respond by the stated deadline to be considered for award, ensuring alignment with the technical, compliance, and logistical demands of the aerospace defense supply chain.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Solicitation # W911S226U3898

The contract titled STEEL BAR is a combined solicitation under the Small Business Set Aside - Total designation, aimed at supporting small businesses, with a NAICS code of 331110 indicating manufacturing of iron and steel forgings, stampings, and related products. It was posted on July 31, 2026, with a response deadline of August 10, 2026, at 9:00 PM. The contracting office is the W6QM Micc-Ft Drum under the Department of Defense, located at Fort Drum, New York, 13602-5220. The place of performance is unspecified in terms of city and state but has a ZIP code of 61299, which may indicate a logistics or distribution point. Cindy Jepsen is the primary point of contact, reachable via email at cindy.k.jepsen.civ@army.mil or phone at 309-782-8389. Interested parties must submit responses through the SAM.gov portal using the provided UI link before the deadline to be considered for award.

W6QM Micc-Ft Drum

POSTED

DEADLINE

Supplier of Raw Materials (Metal Stock)The contract calls for the supply of steel or aluminum stock that complies with RoHS and REACH environmental standards, intended for the fabrication of vehicular brackets. All materials must be accompanied by certified mill test reports verifying chemical composition and mechanical properties to ensure conformity with required specifications. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 331110 indicating the classification for iron and steel mills and ferroalloy manufacturing. The opportunity was posted on July 30, 2026, and responses are due by August 14, 2026, with the contracting activity managed by the Strategic Acq Program Directorate within the Department of Defense. Performance is expected to align with federal procurement guidelines, and all submissions must be made through the designated DIBBS platform.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Blade Steel and Raw Material SupplyThe contract calls for the supply of high-grade steel grades such as 154CM and S30V specifically formulated to meet military material specifications for combat knife blades, with an emphasis on consistent performance under extreme conditions. All materials must be accompanied by complete traceability documentation and certified metallurgical analysis to ensure compliance with defense-grade purity, hardness, and composition standards. The supplier is required to maintain full lot tracking from raw material origin through final delivery, with each batch verified against approved military specifications and supported by documented quality control records. Performance is mandated at the designated location in New Cumberland, Pennsylvania, with a tight response deadline of August 10, 2026, following a posting date of July 30, 2026. This subcontract falls under NAICS code 331110, identifying it as part of the primary metal manufacturing sector, and is procured by the Department of Defense through its Land Supplier Operations Vehicle Support agency. The contract emphasizes secure and reliable supply chain integrity, requiring adherence to stringent defense logistics protocols, and is issued as a direct subcontract without set-aside provisions, allowing participation from qualified vendors regardless of size or status.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Warehousing and Storage of Finished Harness InventoryThe contract entails the secure, climate-controlled warehousing and inventory management of finished oxygen cylinder carrying harnesses, ensuring all items are stored under strict environmental controls to maintain product integrity until authorized government shipment. Full traceability of inventory is required at every stage, with comprehensive documentation and audit-ready systems in place to support governmental compliance and accountability. The storage facility must support accurate real-time tracking, inventory reconciliation, and controlled access protocols to prevent loss, damage, or unauthorized handling. This is a total small business set-aside subcontract classified under NAICS code 493130, designated for businesses certified under the SBA program, and issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on August 4, 2026, with responses due by September 3, 2026. While specific performance location details are not provided, the contractor is expected to comply with all federal contract requirements including security standards, supply chain integrity, and timely delivery readiness for government distribution. All operations must align with Department of Defense logistics protocols and maintain unwavering readiness for inspection and audit.

Farm Product Warehousing and Storage

POSTED

about 6 hours ago

DEADLINE

Logistics and Transportation of Finished HarnessesThe contract entails the transportation and delivery of finished oxygen cylinder carrying harnesses from the manufacturing site to designated government locations, requiring full compliance with Department of Defense shipping standards. All logistics operations must adhere to stringent military transportation protocols to ensure the safe and timely movement of these critical medical equipment components. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, and the North American Industry Classification System code 484220 specifically identifies this as a heavy and tractor-trailer trucking service. The solicitation was posted on August 4, 2026, with responses due by September 3, 2026, and the overseeing agency is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is expected to occur at unspecified government destinations, and all shipments must meet DoD requirements for handling, tracking, and documentation.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 6 hours ago

DEADLINE

Wholesale Supply of Tactical Harness Hardware and ComponentsThe contract solicits the wholesale supply of certified buckles, fasteners, and other hardware components critical to the assembly of oxygen cylinder carrying harnesses, requiring full traceability and documented compliance with military-grade standards. All items must meet precise technical specifications to ensure reliability and safety in tactical and emergency medical applications, with rigorous quality control processes enforced throughout production and delivery. The award will be made under a Total Small Business Set-Aside, restricted exclusively to small businesses as defined by the SBA, and is classified under NAICS code 423220 for merchant wholesalers of hardware and plumbing and heating equipment. The opportunity is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV and is issued as a subcontract, indicating it supports a larger procurement program. Responses are due by September 3, 2026, with the solicitation posted on August 4, 2026. Performance locations are not specified, suggesting the components may be delivered to multiple DoD sites or integrated into broader logistics networks. All suppliers must provide complete documentation to ensure end-to-end traceability of materials and manufacturing processes, enabling compliance with defense supply chain security protocols and regulatory requirements.

Home Furnishing Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Metal Buckles and Hardware Supply for Tactical HarnessesThe contract seeks the manufacture and supply of corrosion-resistant, high-strength metal buckles and plated hardware components designed for use in life-support carrying harnesses, with all items required to meet rigorous military specifications. These components are critical to the integrity and reliability of tactical harness systems, demanding precision engineering and materials capable of withstanding extreme environmental and operational stresses. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing the Department of Defense’s commitment to supporting small business participation in defense supply chains. The solicitation, identified under NAICS code 332996 for Other Fabricated Metal Product Manufacturing, was posted on August 4, 2026, with a response deadline of September 3, 2026. It is managed by the ASC SUPPLIER OPER AE AND AF DIV of the Department of Defense, and performance will occur at an unspecified location. All submissions must align with the technical, quality, and delivery requirements inherent to military-grade life-support equipment, and bidders are expected to demonstrate capable production infrastructure, compliance with defense standards, and a clear pathway to consistent, on-time delivery. Interested parties must access the full solicitation through the provided DIBBS link to understand full technical specifications and submission protocols.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Raw Materials and Components for Harness AssemblyThe contract entails the supply of military-grade webbing, straps, padding, and thread specifically engineered for the assembly of oxygen cylinder carrying harnesses, with stringent requirements for full traceability and adherence to defense specifications. All materials must meet exacting performance and durability standards required for mission-critical defense applications, ensuring reliability under extreme operational conditions. The subcontract is issued as a total small business set-aside under the SBA program, reserved exclusively for small businesses certified to fulfill federal contracting obligations under FAR 19.5, with the NAICS code 315990 classifying the work within the other textile product mills category. Responses are due by September 3, 2026, with the solicitation posted on August 4, 2026, under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The performance location is not specified beyond agency oversight, and the contract is managed through the DLA Dibbs system with the solicitation number SPE4A726R0710. Bidders must demonstrate capability to deliver compliant materials with documented chain-of-custody and quality control processes aligned with defense supply chain integrity requirements. Successful vendors will support logistics and life-safety systems essential to military operations, emphasizing quality, compliance, and timely delivery without deviation from technical specifications.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 6 hours ago

DEADLINE

Manufacturing of Oxygen Cylinder Carrying HarnessesThe contract encompasses the manufacture, quality assurance, packaging, and delivery of Oxygen Cylinder Carrying Harnesses identified by National Stock Number 005712239, a life support item critical to mission-critical operations. Strict quality control and full traceability requirements are mandated due to the item’s essential role in medical and emergency support systems, demanding rigorous adherence to established standards throughout all production phases. The manufacturing process must ensure durability, reliability, and compliance with all applicable military specifications, with each unit subjected to thorough inspection and documentation to guarantee performance under demanding conditions. This acquisition is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses qualify to respond, as defined by the Small Business Administration under FAR 19.5. The North American Industry Classification System code 339920 indicates the work falls under Other Miscellaneous Manufacturing, aligning the scope with specialized fabrication of non-electronic medical or safety equipment. The solicitation was posted on August 4, 2026, with a response deadline set for September 3, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is expected to occur under the oversight of this agency, with no specific location designated, allowing flexibility for qualified small businesses to fulfill the requirement while maintaining full compliance with federal defense procurement protocols.

Sporting and Athletic Goods Manufacturing

POSTED

about 6 hours ago

DEADLINE

Logistics and Packaging for Defense ShipmentsThe contract seeks qualified small businesses to develop and execute military-compliant packaging and shipping plans tailored for defense shipments, ensuring full adherence to DFARS freight requirements. This includes the accurate collection and submission of dimensional and weight data essential for precise transport cost modeling, which directly impacts logistics efficiency and compliance across the Department of Defense supply chain. All proposed solutions must meet strict military standards for protection, labeling, and handling during transit, with a focus on minimizing damage and ensuring timely delivery under operational conditions. This is a total small business set-aside under NAICS code 488510, exclusively reserved for small businesses as defined by the SBA, and is issued as a subcontract under the ASC SUPPLIER OPER AE AND AF DIV of the Department of Defense. Interested parties must submit their proposals by the deadline of September 3, 2026, with the requirement to demonstrate proven experience in defense logistics, packaging certification, and compliance with federal regulations governing military transport. Performance is expected to align with DoD logistics protocols, though no specific location is designated for performance. Bidders are directed to the official DIBBS portal for full solicitation details and submission guidelines.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Cybersecurity Compliance and CMMC Assessment SupportThis contract solicits support services to enable defense contractors to achieve CMMC Level 2 compliance by implementing the controls outlined in NIST SP 800-171, conducting comprehensive system assessments, and preparing accurate SPRS reports for Controlled Unclassified Information environments. The work is targeted at small businesses, as the procurement is set aside entirely for small business participation under SBA guidelines, and is classified under NAICS code 541512 for computer systems design services. The services must be delivered to ensure full alignment with Department of Defense cybersecurity requirements for handling sensitive government data, with an emphasis on documentation, validation, and continuous compliance readiness. The contract is issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV and is structured as a subcontract, indicating it supports a larger prime contracting effort. Interested parties must submit responses by September 3, 2026, and all activities will be performed in support of government contracts handling Controlled Unclassified Information. The solicitation is publicly accessible via the DIBBS portal, and while the place of performance and point of contact are not specified, the nature of the work requires close coordination with federal defense contractors across multiple locations to facilitate assessment, implementation, and reporting activities on-site or remotely as needed.

Computer Systems Design Services

POSTED

about 6 hours ago

DEADLINE

Precision Machining and Fabrication of Microphone BracketThe contract calls for the precision machining and fabrication of a microphone bracket designed specifically for military communication systems, requiring adherence to Critical Application Item standards that ensure uninterrupted performance under extreme operational conditions. The component must meet stringent requirements for reliability, durability, and environmental resilience, with manufacturing processes subject to rigorous quality control to support mission-critical applications in defense environments. All work must be performed by a small business as this is a Total Small Business Set-Aside under SBA guidelines, with the North American Industry Classification System code 332999 indicating it falls under miscellaneous fabricated metal product manufacturing. The solicitation was posted on August 4, 2026, with proposals due by September 3, 2026, and is issued under the Department of Defense through the ASC Supplier Oper AE and AF Division. The place of performance and office address details are not provided, but performance is expected to align with defense logistics and supply chain expectations for the U.S. military. Bidders must demonstrate proven capability in high-precision metal fabrication, quality assurance protocols, and experience supplying components for military systems, as failure to meet specifications could compromise communication effectiveness in the field. All interested parties must submit responses through the designated DIBBS portal by the stated deadline.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-611K

The contract specifies the procurement of 62 boxes of blind rivets with NSN/Part Number 5320-01-330-2847 under solicitation SPE4A7-26-T-611K, with a response deadline of August 12, 2026, and a delivery requirement within 171 days after award. The item is designated as a critical item requiring origin inspection, and all supplies must comply with detailed technical and quality requirements indexed by R or I numbers referenced in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to DLA standards, and documentation for source approval is mandatory. Government identification must be removed from non-accepted supplies, and inspection and acceptance will occur at the origin. Covered defense information is potentially applicable, and tailored higher-level quality requirements govern both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, with Brad Ingram of the Department of Defense, ASC Supplier Operations AE and AF Division, serving as the primary point of contact.

Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

DRUM ASSEMBLY, WINCH

Solicitation # SPE4A7-26-T-615R

The contract is for the procurement of seven drum assemblies for winches with part number 9-14986 and NSN 1680-00-229-9128, under solicitation SPE4A7-26-T-615R. Delivery is required within 171 days of award, with performance to occur at Tinker AFB, Oklahoma. The solicitation, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, closed for responses on August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent configuration management, inspection at origin, and export control regulations under ITAR or EAR, restricting technical data access to contractors with approved JCP certification, completed DOD export training, and formal DLA authorization. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Physical marking of bare items and controlled handling of technical data are mandatory per DFARS 252.225-7048. All data sharing involving foreign persons, including U.S. subsidiaries and foreign nationals within the United States, is prohibited without prior government authorization.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

KEYBOARD, DATA ENTRY

Solicitation # SPE4A7-26-T-615E

The contract is for the procurement of 13 keyboard, data entry units with NSN/Part Number 5895-01-587-7441, classified as a commercial off the shelf item. The solicitation number is SPE4A7-26-T-615E, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 12, 2026, and a required delivery date 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided website, with the revision in effect on the solicitation issue date or award date controlling based on acquisition size and any applicable amendments. Government identification must be removed from non-accepted supplies as per RQ011. The place of performance is designated as San Diego, CA, with Michael Johnson serving as the primary point of contact via email and phone. The NAICS code is 334511, and the procurement falls under federal acquisition guidelines without a specified set-aside type.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE