Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

KEYBOARD, DATA ENTRY

Active
SPE4A7-26-T-615EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 13 keyboard, data entry units with NSN/Part Number 5895-01-587-7441, classified as a commercial off the shelf item. The solicitation number is SPE4A7-26-T-615E, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 12, 2026, and a required delivery date 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided website, with the revision in effect on the solicitation issue date or award date controlling based on acquisition size and any applicable amendments. Government identification must be removed from non-accepted supplies as per RQ011. The place of performance is designated as San Diego, CA, with Michael Johnson serving as the primary point of contact via email and phone. The NAICS code is 334511, and the procurement falls under federal acquisition guidelines without a specified set-aside type.

General Info

Procure 13 keyboard units, NSN 5895-01-587-7441, delivery in 171 days post-award, San Diego, CA.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-615E.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
MICHAEL JOHNSON
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
KEYBOARD,DATA ENTRY
KEYBOARD,DATA ENTRY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
COMMERCIAL OFF THE SHELF ITEM. THE PROCUREMENT
AGENCY HAS COMMERCIAL CATALOG DATA ADEQUATE FOR
THE NSN/Part Number: 5895-01-587-7441 Quantity: 13 EA Purchase Request: 7017741811QTY: 13 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
DIBBS
SHAFT ASSY, MAIN
Solicitation # SPE4A6-26-T-11PX
The contract pertains to the procurement of a Main Shaft Assembly with part number 85400000080 and NSN 6610001040538, supplied by Kollsman Inc. with CAGE code 89944, under solicitation SPE4A6-26-T-11PX. Three units are required to be delivered in 171 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including labeling per MIL-STD-129 with no special marking, and palletization must adhere to the specified standards. The item is designated as a critical application item with technical and quality requirements governed by the DLA Master List, referenced via R numbers, and cybersecurity compliance requires a CMMC Level 2 Self-Assessment. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. Delivery is directed to Hill Air Force Base, Utah, with specific shipping and transportation protocols outlined in DLAD procedural notes. The contract was posted in August 2026 with a response deadline in the same month, and the required delivery date is March 3, 2027.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CABLE, INVASIVE BLOOD P
Solicitation # SPE2DS-26-T-306F
The contract is for a right-angle invasive blood pressure transducer cable with an Edwards connector, intended for use with oval transducers, and is classified under the NSN 6515-01-615-0921. The unit of issue is each, with a quantity of three units required at a unit price of $3.00, totaling $9.00. Delivery is set for 84 days after award, with delivery terms FOB destination, and no variance is permitted in quantity. Inspection and acceptance occur at the destination point. The item is regulated by the FDA, requiring referral to a product specialist in EBS with full bidder and manufacturer details including part numbers. Packaging must comply with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in commercial-grade containment to prevent damage, with outer shipping containers ensuring safe, low-cost transport to the delivery point. The packaging and marking instructions must strictly adhere to the specified commercial standards outlined in SPE2DS-26-T-306F, and the material is subject to defense information coverage under RD003. The contract references DLA’s technical and quality requirements identified by R and I numbers and mandates that bidders explicitly state the source and part number of the supplied item. The delivery address is APO AE 09227-0000, with freight shipping directed to Kaiserslautern, Germany, and the original required delivery date is August 4, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
GUIDE, SPRING
Solicitation # SPE4A6-26-T-11TJ
The contract pertains to the procurement of seven GUIDE, SPRING units with NSN 5865-00-895-4139 under solicitation SPE4A6-26-T-11TJ, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 171 days after award, and the item is classified as a commercial item, including commercial of a type, which influences compliance and documentation standards. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Mandatory documentation includes source approval requests, adherence to DLA packaging standards, tailored quality requirements for both manufacturers and non-manufacturers, inspection and acceptance at origin, removal of government identification from non-accepted supplies, and physical identification or bare item marking. Measuring and test equipment must meet specified standards, and sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The alternate offeror must provide a complete data package inclusive of details for both the approved and alternate parts, as no data is currently available. The place of performance is Robins AFB, Georgia, and inquiries should be directed to Emma Garrett at emma.garrett@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
TRANSDUCER, SONAR
Solicitation # SPE4A6-26-T-12CB
The U.S. Department of Defense, through DLA Aviation, is seeking quotes for three transducers, sonar, identified by NSN 5845015278836, under a Small Business Set Aside contract. The solicitation, numbered SPE4A626T12CB, is issued as a combined request for quotation and is exclusively available online through the SAM.gov portal, with no hard copies provided. Quotes must be submitted electronically and received by the deadline of August 12, 2026, with delivery required to DLA Distribution facility W1A8 within 171 days of award. The approved source for this item is ITC-3167C, and only responsible sources may respond. The procurement is restricted to small businesses as defined by the SBA, with the NAICS code 334511 applicable. No technical specifications, plans, or drawings are available to potential vendors; all inquiries must be directed via email to the designated point of contact, DibbsBSM@dla.mil, with further details accessible through the solicitation link on DIBBS. The office managing this procurement is located in Richmond, Virginia.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CAP
Solicitation # SPE4A7-26-T-612Z
This contract issued under solicitation SPE4A7-26-T-612Z pertains to the procurement of five units of a Commercial Off The Shelf (COTS) item identified by NSN 5855016716941 and part number 12712-3320-00 from SAFRAN DEFENSE & SPACE, INC. The item is subject to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Delivery must be made FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, while labeling and marking adhere to MIL-STD-129 with no special marking required. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics follow DLA procedural notes C19 and C20. The required ship date is January 31, 2027, with the original delivery deadline set for March 26, 2027. The contract is governed under a federal solicitation with NAICS code 334511, managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with Michael Johnson as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CATHETERIZATION KIT, UR
Solicitation # SPE2DS-26-T-305W
The contract specifies the procurement of a urethral catheterization kit, designated as a 16FR Foley catheter with a 2000 mL anti-reflux valve bag, packaged in units of 10 per pack (PG). Each kit includes sterile drapes, underpads, specimen containers, five prep balls, povidone-iodine solution, gloves, prefilled syringes with 10 CC sterile water and lubricant, and forceps. The product must have a 36-month shelf life, with no more than five months elapsed from manufacture to government delivery. Packaging must comply with DLA Packaging Requirements, Medical Marking Standard No. 1, and ASTM D3951, with labeling requirements including NSN, manufacturer and CAGE code, manufacture and expiration dates, contract and lot numbers. The item is regulated by the FDA and requires referral via EBS for confirmation. Two delivery locations are specified: USS ZUMWALT DDG 1000 in FPO AP and Fort Campbell, KY, with shipments prohibited from using parcel post and requiring traceable means. Delivery is due within 20 days from order with zero quantity variance permitted. The unit of issue is PG, and the NSN is 6515016152124. Manufacturer part numbers 899616 from Cardinal Health 200, LLC and C. R. Bard, Inc. are accepted. Palletization and marking must adhere strictly to DLA standards, and all packaging documentation must supersede any conflicting requirements.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
OPTICAL SUBASSEMBLY
Solicitation # SPE4A7-26-T-613M
The U.S. Department of Defense, through the Defense Logistics Agency Aviation, is soliciting quotes for an optical subassembly identified by NSN 5860016925329, with a requirement for nine units to be delivered to W1A8 DLA DISTRIBUTION within 171 days after award. The solicitation is a Small Business Set Aside under NAICS code 334511 and is exclusively available electronically via the SAM.gov platform; no hard copies are provided and no technical specifications, plans, or drawings are accessible. Only approved source 6KWZ6 10091169 is authorized for this item, but all responsible sources may submit a quote if received by the deadline. All submissions must be made electronically through the designated portal, and the response deadline is August 12, 2026. Questions should be directed via email to the point of contact listed in the solicitation, with additional information accessible through the provided SAM.gov link or DIBBS website using the solicitation number SPE4A713M.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
TAG, CASUALTY TRIAGE
Solicitation # SPE2DS-26-T-306M
The TAG, CASUALTY TRIAGE is a ruggedized combat casualty card designed for use during the three phases of tactical combat casualty care, providing essential patient documentation in high-stress battlefield environments. Constructed from tear-resistant and waterproof material, it includes a grommet-reinforced punch for secure attachment and is sized to fit within an individual first aid kit, with pack dimensions of 6 inches in height, 4.5 inches in width, and 1.5 inches in depth, weighing 5.5 ounces. Each package contains 25 cards, and the unit of issue is a package. The product is identified by NSN 6515-01-587-1700, with a procurement quantity of four packages. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and removal of government identification from non-accepted supplies is mandated. The contract solicitation number is SPE2DS-26-T-306M, issued on August 4, 2026, with responses due by August 10, 2026. Delivery is required within 20 days of award to Fort Bliss, Texas, and the point of contact is Allen Costello at the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
PLUG, EAR
Solicitation # SPE2DS-26-T-306V
The contract specifies the procurement of 75 pairs of large, clear-colored EP-3 Sonic Defender ear plugs, packaged in boxes of 25 pairs each, under NSN 6515-01-606-4499 and manufacturer part number EP3-LPR-BULK supplied by SUREFIRE, LLC with CAGE code 0BJZ8. All packaging must comply with DLA Packaging Requirements for Procurement, including sealed unit containers that protect against damage and commercial shipping containers suitable for safe delivery at the lowest freight rate, with markings adhering to Medical Marking Standard No. 1, which supersedes MIL-STD-129. Each box and container must be labeled with the NSN, manufacturer and CAGE code, manufacture date, expiration or retest date, contract number, and lot number, with all exterior containers clearly marked with “MFD” preceding the lot and manufacturing date. The item is regulated by the FDA, requiring referral through EBS for confirmation prior to award. Delivery is set for FOB destination within 20 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must follow ASTM D3951 unless superseded by DLA Master List of Technical and Quality Requirements, with palletization conforming to RP001. The delivery address is the USS RALPH JOHNSON DDG 114, FPO AP 96691-3300, with vessel shipment coordinated under DLAD PROC NOTE C19 and C20. The contract number SPE2DS-26-T-306V, unit price of $3.00 per box, and total quantity of 3 boxes are confirmed, with the original required delivery date set for August 6, 2026. All bids must include the company and part number being supplied, and the unit of issue is strictly defined as a box of 25 pairs, with all labeling and marking requirements mandatory for compliance and acceptance.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
NAVIGATION SET
Solicitation # SPE4A5-26-T-326C
The contract specifies the procurement of a Garmin International, Inc. Navigation Set with part number 010-02681-00 and NSN 6605-01-665-8045, identified as a commercial off-the-shelf item with no shelf life requirement and no need for item unique identification. The order quantity is 18 units, to be delivered FOB origin within 171 days from the contract date, with no tolerance for quantity variance. Delivery is required to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must adhere to DLA packaging standards; mercury and mercury compounds are strictly prohibited in preservation and packaging. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified, and attributes are classified with corresponding verification levels or AQLs. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The unit of issue is each, and transportation logistics follow DLA Procurement Notes C19 and C20. The solicitation number is SPE4A5-26-T-326C, with a response deadline of August 12, 2026, and the contract is under the Department of Defense’s ASC Supplier OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
CASE, DEFIBRILLATOR-MON
Solicitation # SPE2DS-26-T-306Q
The contract is for a specialized soft molded carrying case designed for the ZOLL PROPAQ MD defibrillator-monitor, constructed from vinyl with cushioned siding to safeguard the equipment during transport. Each unit is sold individually, with a total requirement of seven units, under the NSN 6515-01-615-0896 and purchase request number 7017729839. Delivery is required within 20 days of award, and the item is classified under NAICS code 334511, indicating manufacturing in the medical equipment and supplies sector. The solicitation, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, has the identifier SPE2DS-26-T-306Q and is open for bid until August 10, 2026, with a posting date of August 4, 2026. Bidders must clearly identify the source and part number being offered. The contract incorporates technical and quality standards referenced in the DLA Master List, mandates compliance with DLA packaging requirements, and requires removal of government identification from rejected supplies. Defense Information potentially applies, and the delivery location is Hurlburt Field, Florida, 32544-5668, with Aidan Martz as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
CABLE, INVASIVE BLOOD P
Solicitation # SPE2DS-26-T-306X
The contract specifies the procurement of an invasive blood pressure transducer cable with a right-angle Edwards connector, designed for use with oval transducers, and is regulated by the FDA. The item is identified by NSN 6515-01-615-0921 and must be supplied in exact accordance with approved part numbers from authorized manufacturers such as McKesson Medical-Surgical and Zoll Medical Corporation. Each unit must be packaged in sealed commercial containers that protect against damage, conforming to ASTM D3951 unless superseded by higher-priority DLA Technical and Quality Requirements referenced in RA001, RP001, and RQ011. Packaging and labeling must comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and palletization must adhere to DLA packaging guidelines. The contract mandates delivery of seven units within twenty days to Hurlbert Field, Florida, under FOB destination terms with zero variance allowed in quantity, and requires traceable freight shipping—parcel post is expressly prohibited. All bids must include the supplier’s source and part number, and the contracting official must refer the bid to the FDA product specialist via EBS for confirmation prior to award. The solicitation number is SPE2DS-26-T-306X, with a response deadline of August 10, 2026, and the original required delivery date is August 6, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A7-26-T-611K
The contract specifies the procurement of 62 boxes of blind rivets with NSN/Part Number 5320-01-330-2847 under solicitation SPE4A7-26-T-611K, with a response deadline of August 12, 2026, and a delivery requirement within 171 days after award. The item is designated as a critical item requiring origin inspection, and all supplies must comply with detailed technical and quality requirements indexed by R or I numbers referenced in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to DLA standards, and documentation for source approval is mandatory. Government identification must be removed from non-accepted supplies, and inspection and acceptance will occur at the origin. Covered defense information is potentially applicable, and tailored higher-level quality requirements govern both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, with Brad Ingram of the Department of Defense, ASC Supplier Operations AE and AF Division, serving as the primary point of contact.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DRUM ASSEMBLY, WINCH
Solicitation # SPE4A7-26-T-615R
The contract is for the procurement of seven drum assemblies for winches with part number 9-14986 and NSN 1680-00-229-9128, under solicitation SPE4A7-26-T-615R. Delivery is required within 171 days of award, with performance to occur at Tinker AFB, Oklahoma. The solicitation, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, closed for responses on August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent configuration management, inspection at origin, and export control regulations under ITAR or EAR, restricting technical data access to contractors with approved JCP certification, completed DOD export training, and formal DLA authorization. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Physical marking of bare items and controlled handling of technical data are mandatory per DFARS 252.225-7048. All data sharing involving foreign persons, including U.S. subsidiaries and foreign nationals within the United States, is prohibited without prior government authorization.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, MACHINE THREAD
Solicitation # SPE4A7-26-T-610X
The U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking quotes for 1,854 machine thread bushings identified by NSN 5365012707546, to be delivered to DLA Distribution Red River within 128 days of award. This procurement is conducted under solicitation SPE4A726T610X, which is exclusively available electronically via the SAM.gov platform, with no hard copies provided. Digitized drawings and military specifications may be accessed online. The solicitation is set aside for SBA-certified Women-Owned Small Businesses under the WOSB Program, and only responsible sources meeting this eligibility criterion may submit responses. All quotes must be submitted electronically through the designated portal prior to the deadline of August 12, 2026. Questions concerning the solicitation should be directed to the designated point of contact via email, as specified in the official document accessible through the provided UI link or the DIBBS website using the solicitation number.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-613C
The contract pertains to the procurement of a SHIM part identified by NSN 5365-01-725-5627 and part number 56767-1, manufactured in compliance with Basic Drawing NR 70210 56767 Revision D dated 11/07/1955. A total of 21 units are to be delivered FOB origin with zero variance allowed in quantity, and delivery must be completed within 171 days from the contract award, with an original required delivery date of January 7, 2027, and a need ship date of January 31, 2027. Inspection and acceptance occur at the origin, and packaging must conform to MIL-STD-2073-1E with designated preservation methods, materials, and unit packaging details, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and the delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined by the drawing or specification. The supplier must comply with DLA’s Master List of Technical and Quality Requirements identified by R or I numbers, including specific provisions for removal of government identification, physical marking of bare items, and documentation for source approval requests. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and covered defense information is subject to RD002 controls. Documentation for source approval must meet RC001 standards, and all units must be shipped in accordance with DLA transport and freight procedures. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under contract number SPE4A7-26-T-613C, and the primary point of contact is Jessica Gentry.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PISTON, HYDRAULIC AC
Solicitation # SPE4A7-26-T-612C
The contract specifies the procurement of two hydraulic pistons for air conditioning systems under NSN 1650-01-517-7844 and part number 11463841 from RANDOLPH & BALDWIN, INC. Delivery is required FOB origin within 171 days, with no variance allowed in quantity, and inspection and acceptance are to occur at the manufacturer’s location. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must follow MIL-STD-129 and RP001 guidelines. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Quality management systems must meet ISO 9001:2015, and measuring equipment must meet RT001 standards. Physical identification and bare item marking are mandatory per RQ017. The contract references revision B of drawing NR 18876 dated 08/13/1997 and revision D dated 07/02/1985, with a newer revision dated 03/14/2024 governing the current requirement. The item must be delivered to the DLA Distribution facility in New Cumberland, PA, with the original required delivery date set for January 27, 2027, and an anticipated ship date of January 31, 2027. The contract was solicited under SPE4A7-26-T-612C, classified under NAICS 336413, with Jamiah Sutton as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
VIBRATION ISOLATOR,
Solicitation # SPE4A7-26-T-612K
The contract pertains to the procurement of 605 units of a vibration isolator, identified by NSN 1680-01-552-5433 and part number 51037 from TECH PRODUCTS CORP, under solicitation SPE4A7-26-T-612K. Delivery is required within 67 days of order placement, with FOB origin terms and inspection and acceptance occurring at the destination. The quantity is fixed with no tolerance for variance, and packaging must comply with ASTM D3951 while adhering strictly to MIL-STD-129 for marking and labeling, with palletization governed by DLA’s RP001 packaging requirements. The DLA Master List of Technical and Quality Requirements supersedes any conflicting standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item is designated as a critical application component and must be physically marked per RQ017. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. The delivery address is DLA Distribution Jacksonville, and transportation guidelines reference DLAD Proc Notes C19 and C20. The original delivery requirement is set for December 12, 2026, with a needed ship date of July 15, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SAFETY CABLE KIT
Solicitation # SPE4A7-26-T-614C
The Safety Cable Kit is procured under NSN 5342-01-625-3947 with a total quantity of 16 packaging groups, where each packaging group contains 50 individual kits, resulting in 800 total kits. Each kit consists of a cable and a magazine, and each magazine is preloaded with 50 ferrules compliant with specification AS3510-0312K. The unit of issue was changed to packaging group (PG) on April 1, 2022, and all items must adhere to DLA packaging requirements for procurement. Physical identification and bare item marking are mandated, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances allowed unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the manufacturer’s origin, and the item is procured competitively under a military specification. The contract solicitation number is SPE4A7-26-T-614C, with a response deadline of August 12, 2026, a posting date of August 4, 2026, and a delivery requirement 171 days after award. The point of contact is Jamiah Sutton of the Department of Defense’s ASC Supplier Oper AE and AF Division, and the place of performance is New Cumberland, Pennsylvania, with NAICS code 332510 applicable.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
CORE ASSY BOND, SPEC
Solicitation # SPE4A7-26-T-612N
The contract seeks the procurement of 20 units of CORE ASSY BOND,SPEC with NSN 2995015940126, to be delivered to W1A8 DLA DISTRIBUTION within 171 days after award. Only two approved sources are listed for this item, identified by the part numbers LM-200-158 under vendors 76005 and 98897. The solicitation is issued as an RFQ through SAM. gov under number SPE4A7726T612N and is strictly electronic; no hard copies are available, and no specifications, plans, or drawings are provided. All responsible suppliers may submit quotes, provided they are received electronically by the deadline of August 12, 2026. The opportunity is open without set-aside restrictions, and responses must be submitted via the online portal. The contracting office is the DLA Aviation based in Richmond, Virginia, with inquiries to be directed to the designated point of contact via email. The NAICS code 336412 indicates this procurement relates to aerospace product and parts manufacturing.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-612E
The contract pertains to the procurement of SHIM with NSN 5365-01-472-5933, totaling 117 units, under solicitation number SPE4A7-26-T-612E, which was posted on August 4, 2026, with responses due by August 12, 2026. The item is subject to strict export control regulations under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons, regardless of location, requires prior authorization from the U.S. Department of State or Department of Commerce. Foreign nationals employed by U.S. companies or subsidiaries are equally restricted, and compliance with DFARS 252.225-7048 is mandatory. Distribution is limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD training on handling export-controlled data, and have successfully submitted the DLA Export-Controlled Technical Data Questionnaire, all while receiving formal approval from the DLA controlling authority. The place of performance is specified as New Cumberland, Pennsylvania, with a delivery timeline of 171 days after contract award. The contracting office is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact Brandon Smith reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHACKLE
Solicitation # SPE4A7-26-T-614L
This contract, identified by solicitation number SPE4A7-26-T-614L, is for the procurement of 99 units of a shackle with NSN 4030-01-657-5940 and part number 10823-17279 from Fastenal Company Div Oshk, CAGE code 3SPK0. The item must be delivered FOB origin with no variance in quantity and is subject to destination inspection and acceptance. The required delivery date is December 4, 2026, with an allowable delivery window of 171 days, and the shipment must be prepared by January 31, 2027. Packaging and labeling must comply strictly with MIL-STD-129 and ASTM D3951, with packaging requirements subordinate to the DLA Master List of Technical and Quality Requirements. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001). All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List in effect on the solicitation issue date, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are deemed major. The unit of issue is each (EA), priced at $99.00, for a total value of $9,801. The delivery destination is DLA Distribution Barstow, Central Receiving Warehouse 7, with specific contact details provided. Transportation and shipping instructions must follow DLAD Proc Notes C19 and C20. The contract includes mandatory physical marking of the item as specified under RQ017 and requires removal of government identification from non-accepted supplies as per RQ011.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-614K
The contract pertains to the procurement of a single unit of DUCT ASSEMBLY,AIR C with NSN/Part Number 0001S00000052, under solicitation SPE4A7-26-T-614K, with a delivery requirement of 260 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed or transferred to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled technical data, and approved access via the DLA questionnaire are permitted to receive or work with this information. The procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance scheduled for Key West, Florida, 33040-9059, and the primary point of contact is Georgina Vass at georgina.vass@dla.mil. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, under a federal contracting mechanism with NAICS code 331491.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A7-26-T-611G
The solicitation seeks procurement of 10 units of NSN 1650012936045, HEAD,HYDRAULIC MOTOR-P, with nine units to be delivered to W1A8 DLA DISTRIBUTION within 613 days after award and one unit within 240 days after award. All responsible sources are invited to submit electronic quotes by the deadline of August 12, 2026, and timely submissions will be considered. The contract is classified as a combined opportunity under NAICS code 336413, administered by the Department of Defense through DLA Aviation, with the contracting office located in Richmond, Virginia. Solicitation details can be accessed via the provided SAM.gov link, and all inquiries must be directed to the designated buyer email address listed in the solicitation document.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details