Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Specialty Steel Supply for Breechblock Forgings

Active

Federal

Response Deadline11/04/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Specialty Steel Supply for Breechblock Forgings, involves the procurement of high-strength raw alloy steel stock and billets for prime contractors working on US Army 105mm M20 artillery projects. The supplier is responsible for providing materials that strictly adhere to the metallurgical specifications outlined in drawing 12591138, Rev B, and must deliver the stock directly to the designated forging facility in Watervliet. To ensure quality and regulatory compliance, the contractor must provide Mill Test Reports verifying the chemical composition and mechanical properties of the steel in accordance with DFARS 252.225-7000. Managed under the Department of Defense through agency W6QK Acc Wva, the contract falls under NAICS code 331110, with a response deadline set for November 4, 2026.

General Info

Supply of high-strength alloy steel for US Army 105mm M20 artillery projects.

Agency

Department Of Defense → W6QK Acc Wva

NAICS

331110 - Iron and Steel Mills and Ferroalloy Manufacturing

Place of Performance

Watervliet, NY, 12189, USA

Set-Aside

NONE

Documents

This scope was carved out of W911PT27QA009.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Breechblock Forging (Rough Machined), per drawing number 12591138, Rev B, for 105mm M20

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 19

subcontract

Response DeadlineNov 4

Submission deadline

Response Deadline

11/04/2026, 09:00:00 PM UTCin 16 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc Wva

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W6QK Acc Wva

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw alloy steel stock for prime contractors on US Army 105mm M20 artillery projects. Sources high-strength alloy steel meeting metallurgical specifications of drawing 12591138, Rev B. Provides Mill Test Reports to verify chemical composition and mechanical properties in compliance with DFARS 252.225-7000. Delivers raw metal stock and billets to the forging facility.

Similar Contracts

Same NAICS industry code

Supply of Steel Comp 630 Round BarsThis subcontract involves the supply of specialized Steel Comp 630 round metal bars for prime contractors supporting Department of Defense supply contracts through Depot Oklahoma. The requirements specify that the material must be in COND H1025 condition, precision cut to a diameter of 5.500 inches and a length of 12.00 feet. The total delivery consists of 15 round steel bars. To ensure quality and compliance, the provider must submit Mill-Material Certification and complete DD Form 1423s in accordance with Metal Certification CDRLs. Performance for this contract is centered at Tinker AFB, with a response deadline set for October 29, 2026.

POSTED

DEADLINE

Steel Comp 630 Flat Bar SupplyThis subcontract involves the supply of specialized Steel Comp 630 metal bars to prime contractors supporting the Department of Defense via the DDSP New Cumberland Facility. The scope of work requires the manufacture of hot finish, flat bars that are solution heat treated to specific dimensions of 1.000 inch thickness, 2.000 inch width, and lengths between 10 and 12 feet. To ensure quality compliance, the provider must deliver the physical metal bars along with mandatory Mill-Material Certification documents. The project falls under NAICS code 331110 and is performed in New Cumberland, Pennsylvania, with a response deadline set for October 29, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Steel Comp 630 Metal BarsThis subcontract involves the sourcing and manufacture of specialized Steel Comp 630 metal bars to support prime contractors fulfilling DLA Troop Support Metals contracts. The required materials must adhere to NSN 9510-00-448-1536 specifications, featuring dimensions of 1.500 inches in thickness and 5.000 inches in width, with lengths ranging from 10 to 12 feet and a reference weight of 25.50 LB/FT. The total delivery requirement is 29,000 feet of metal bar. Managed under NAICS code 331110 for the Department of Defense, the contract requires the supplier to prepare all materials for First Destination Transportation pickup. Performance will take place in Jacksonville, Florida. The solicitation was posted on October 18, 2026, with a response deadline set for October 29, 2026.

JACKSONVILLE BLDG

POSTED

DEADLINE

Supplier of Hot Rolled Steel Bars (UNS K02600)This subcontract involves the supply of 1,015 linear feet of hot rolled steel alloy bars for prime contractors supporting the Defense Logistics Agency. The materials must adhere to UNS K02600 specifications, with dimensions of 0.250 inches in thickness and 3.000 inches in width, provided in lengths ranging from 16 to 22 feet. The supplier is responsible for manufacturing or sourcing the steel and ensuring all units are marked with the appropriate NSN and heat numbers. Packaging must comply with ASTM A700 codes Z and ZZ. The performance of this contract is centered in Tracy, California, under the oversight of the Department of Defense.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Specialty Alloy/Steel Supply for FastenersThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of certified raw metal stock for prime contractors. The scope of work requires the provision of specialty alloy or steel grades that strictly adhere to the metallurgical specifications of NSN 5305-01-165-3297. Performance for this contract will take place in Barstow, California, under NAICS code 331110. A critical requirement of this agreement is strict adherence to domestic sourcing mandates. The supplier must provide Mill Test Reports to verify full compliance with the Berry Amendment and the Buy American Act. Interested parties must respond by October 26, 2026, to provide the necessary certified materials.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Casting and Forging for Safety ValvesThis subcontract, titled Precision Casting and Forging for Safety Valves, involves the production of metal components for prime contractors supporting DLA supply contracts. The scope of work focuses on the casting or forging of metal blanks for Safety Relief Valve NSN 4820014527524, utilizing industrial furnaces or forging presses to meet specific technical drawings and material specifications. A critical requirement of the contract is the provision of mill test reports to certify the material integrity of the valve bodies for critical application use. Managed by the Department of Defense through the DDSP New Cumberland Facility, the project falls under NAICS code 331110. Performance of the work will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 18, 2026, with a response deadline set for October 29, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Steel Alloy 4130 Metal BarsThis subcontract involves the supply of 18 units of hot-rolled, normalized Steel Alloy 4130 bars for prime contractors supporting DLA Troop Support projects. The required specifications for the metal bars are 4.000 inches in width and 10 to 12 feet in length, with a weight of 54.400 LB/FT. All materials must undergo waterproof stenciling and marking in accordance with MIL-STD-129. The contract is managed by Depot Hill for the Department of Defense, with the place of performance located at Hill AFB. Compliance with DFARS regulations 252.204-7012, 252.223-7008, and 252.225-7007 is mandatory. The solicitation was posted on October 18, 2026, with a response deadline of October 29, 2026, under NAICS code 331110.

POSTED

DEADLINE

Supplier of Copper Alloy 715 Round Metal BarThis subcontract involves the manufacture or sourcing of round metal bars made from Copper Alloy 715 to support prime contractors fulfilling DLA supply contracts. The required specifications call for 2.000-inch diameter bars in lengths ranging from 8 to 12 feet, adhering to MIL-C-15726F(1), MIL-C-3993C, MIL-STD-129R(3), and SAE AMS-STD-185A standards. A total of 54 feet of finished bars must be delivered to the DDSP New Cumberland Facility, accompanied by a Certificate of Quality Compliance. To be eligible, the supplier must maintain a QSLD listing and ensure full compliance with the Buy American Act. The project falls under NAICS code 331110 and is managed by the Department of Defense. Interested parties must submit their responses by October 29, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

XM-13 Steel Bar ManufacturingThis subcontract through the Department of Defense DDSP New Cumberland Facility involves the manufacture of high-strength Steel Comp XM-13 metal bars for prime contractors on DLA supply contracts. The project requires the production of 51 feet of finished bars measuring 0.750 inches wide across flats and 10 to 12 feet in length. Production must utilize solution heat treating and overall descaling with either a cold or hot finish, necessitating the use of industrial heat-treatment furnaces and specialized descaling equipment. Compliance is mandatory regarding the Buy American Act and the Berry Amendment, and the contractor must provide Mill-Material Certification. The performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 29, 2026, under NAICS code 331110.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0109

Solicitation SPE8E4-27-T-0109 is for the procurement of 54 feet of round metal bar made from Copper Alloy 715. The material must be hot or cold worked with a soft temper, featuring a 2.000-inch diameter and lengths between 8 and 12 feet. The contract requires strict adherence to technical specifications including MIL-C-15726F(1), MIL-C-3993C, MIL-STD-129R(3), and SAE AMS-STD-185A. A Certificate of Quality Compliance is mandatory for every shipment, and specific marking requirements—including stenciling and adhesive labels for smaller diameters—must be followed to avoid product rejection. The procurement is managed by the Defense Logistics Agency with delivery to the DDSP New Cumberland Facility in Pennsylvania. Key dates include a need ship date of June 18, 2026, and an original required delivery date of January 13, 2027. Eligibility is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD), and the contract incorporates various DFARS and FAR clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and destination inspection. Delivery is based on FOB Origin, and invoicing must be processed through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0244

Solicitation SPE8E9-27-T-0244 is a total small business set-aside for the procurement of two units of aluminum alloy metal plate (NSN 9535-01-379-9673). The required material must be Alloy 7075, Temper T7351, with dimensions of 48 inches in width, 12 feet in length, and a cross-sectional thickness of 3 inches. All material must be supplied in whole feet lengths. The procurement is governed by several technical standards, including SAE AMS4078 Revision L, ASTM B660, and ASTM B666, and requires a Certificate of Quality Compliance (Mill-Material Certification) to be provided with every shipment. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract specifies destination inspection and acceptance at the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging and marking must adhere to MIL-STD-129, MIL-STD-2073-1E, and RP001, with specific requirements for continuous identification markings including the contract delivery order number, NSN, and manufacturer details. The required delivery date is April 18, 2027, with a need ship date of March 28, 2027. All quotes must be submitted via the DIBBS portal by October 29, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0108

Solicitation SPE8E4-27-T-0108 is for the procurement of 191 feet of Steel Comp 630 metal bars, featuring a hot finish, flat, and solution heat treated specification. The bars must be 1.000 inch thick and 2.000 inches wide, with lengths between 10 and 12 feet, supplied in whole feet only. This is a critical application item requiring compliance with SAE AMS2806 and QAP 13873. Delivery is set for 149 days after order, with a need ship date of March 28, 2027, and a final required delivery date of April 15, 2027. The shipment is FOB Origin and will be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). Contractors must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Strict marking and packaging requirements apply, including adherence to MIL-STD-129, ASTM A700, and RP001, with specific continuous identification markings required on each unit of issue. Inspection and acceptance will occur at the destination. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and safeguarding requirements for covered defense information. Invoicing is to be processed electronically via the Wide Area WorkFlow (WAWF) system.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QK Acc Wva

Same awarding agency

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports US Army 105mm M20 artillery projects through independent quality validation for prime contractors. The selected provider will perform dimensional inspections of rough machined parts based on drawing 12591138, Rev B, utilizing precision tools such as CMM, calipers, and micrometers. Key responsibilities include verifying First Article Approval, coordinating with government inspection points, and delivering detailed inspection reports. The project is managed by the Department of Defense under agency W6QK Acc Wva and will be performed in Watervliet, New York. To be eligible, contractors must hold ISO 9001 or AS9100 certification. The solicitation was posted on October 19, 2026, with a response deadline of November 4, 2026, falling under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 7 hours ago

DEADLINE

Breechblock Forging (Rough Machined) ManufacturingThis subcontract involves the forging and rough machining of breechblock components for US Army 105mm M20 artillery projects. The scope of work requires the use of industrial forging presses and CNC machining centers to process raw metal into parts that adhere to the specifications of drawing 12591138, Rev B. The contractor is responsible for executing First Article Testing and delivering 77 rough machined forgings along with the required CDRL data in compliance with DFARS 252.225-7000. This project is managed under the Department of Defense through the W6QK Acc Wva agency, with performance taking place in Watervliet.

Iron and Steel Forging

POSTED

about 7 hours ago

DEADLINE

Breechblock Forging (Rough Machined), per drawing number 12591138, Rev B, for 105mm M20

Solicitation # W911PT27QA009

Solicitation W911PT27QA009 is a firm fixed price request for a single award for the procurement of 77 rough machined breechblock forgings for the 105mm M20, conforming to drawing number 12591138, Rev B. The project is managed by the ACC Watervliet Arsenal and falls under NAICS code 332111. To be eligible for award and to retrieve necessary drawings, offerors must maintain an active registration in the System for Award Management and be certified in the Joint Certification Program. All inquiries must be submitted via email, as phone inquiries are not permitted. The contract requires the delivery of hardware and specific contract data per DD Form 1423. Depending on the line item, first article approval may be required, involving the destructive testing of one breechblock for mechanical properties and the submission of two units for 100 percent inspection. The first article test report must be submitted within 120 calendar days of the contract date, with production quantities due 60 days after first article approval or 150 days after receipt of order. Award will be granted to the lowest evaluated offer that meets all responsibility and risk assessment criteria. All shipments are FOB Destination to Watervliet Arsenal, and invoicing must be processed through the Wide Area WorkFlow system.

Iron and Steel Forging

POSTED

about 7 hours ago

DEADLINE

Delivery and Transportation to Watervliet ArsenalThis subcontract, issued by the Department of Defense under agency W6QK Acc Wva, requires the transportation of 30 manufactured cannon containers for prime contractors to the Watervliet Arsenal located at 1 Buffington St Bldg 35, Watervliet, NY. The selected provider must utilize flatbed or box trucks capable of handling large industrial containers and is responsible for coordinating all deliveries through the Army Carrier Appointment System while managing FOB Destination requirements for the designated DoDAAC W16H1F. Classified as a total Small Business Set Aside under NAICS code 484220, the opportunity was posted on October 14, 2026, with a response deadline of October 28, 2026. All performance activities will take place within the 12189 zip code area to support ongoing projects at the arsenal.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Manufacturing of 105mm M20 Cannon ContainersThis small business set-aside subcontract involves the manufacturing of 30 heavy-duty 105mm M20 cannon containers for prime contractors supporting Watervliet Arsenal projects. The contractor is responsible for fabricating the units according to Drawing 11580213 using PM Compliant heat-treated wood, which requires the use of industrial woodworking equipment and valid PM Compliant Wood Certifications. The scope of work includes the production of first article units for government testing and the preparation of contract data in accordance with DD Form 1423. Final deliverables consist of the 30 completed containers along with all associated technical certifications. The project is managed under the Department of Defense through the W6QK Acc Wva agency.

Wood Container and Pallet Manufacturing

POSTED

DEADLINE

Cannon Containers for the Watervliet Arsenal

Solicitation # W911PT27QA008

Solicitation W911PT27QA008 is a total small business set-aside for the procurement of 30 cannon containers for the 105mm M20, to be delivered to the Watervliet Arsenal in Watervliet, New York. The requirement is split into two line items of 15 units each, with the first item requiring a first article submission and the second item waiving it. All containers must be manufactured according to Drawing 11580213 and include PM compliant wood certifications. The government intends to award a firm fixed price purchase order to the offeror providing the lowest evaluated bid that meets all material and responsibility criteria. This is an all-or-none acquisition, meaning offers for less than the total quantity will not be considered. The contractor is responsible for all transportation costs under FOB Destination terms. Delivery for the second line item is required within 60 calendar days following the approval of the first article test. Technical compliance is mandatory, and the government may conduct plant visits or preaward surveys to verify capabilities. Required documentation includes contract data per DD Form 1423 and specific inspection results via WVA Form 702-61-R and DD Form 1222. The contract incorporates strict cybersecurity and safeguarding requirements under DFARS 252.204-7012 and requires the use of the Wide Area WorkFlow system for electronic invoicing. Access to the export-controlled Technical Data Package requires an active JCP record and a current DD Form 2345.

Wood Container and Pallet Manufacturing

POSTED

DEADLINE

Industrial Welding and FabricationThis Industrial Welding and Fabrication subcontract, issued by the Department of Defense for the Army Watervliet Arsenal facility, involves specialized welding and fitting of steel outer shells for lined piping. The scope of work includes welding seamless Schedule 40 carbon steel and stainless steel, as well as fabricating instrument T-junctions using ductile iron and cast steel. All work must be performed in strict adherence to AWS certifications for the specified alloys to ensure the delivery of high-quality welded pipe joints and fabricated fittings. The opportunity is designated as a total Small Business Set Aside under NAICS code 332996. Interested parties must submit their responses by the deadline of October 26, 2026. This project supports prime contractors in executing critical infrastructure tasks within the agency's facility.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Specialized Lined Pipe and Valve SupplyThis subcontract, managed by the Department of Defense under agency W6QK Acc Wva, involves the supply of specialized lined steel pipes, flanges, and valves for prime contractors working on projects at the Army Watervliet Arsenal facility. The scope of work requires the delivery of certified materials, including Seamless Sch 40 CS pipes meeting ASTM A 106 Gr. B and ASTM A312 TP 304/TP316 standards, ANSI B16.5/B16.42 flanges, and floating ball valves featuring ASTM A182 F304 bodies with PTFE, HDPE, or PVDF linings. All materials must be delivered FOB Destination to the facility. The opportunity is designated as a Total Small Business Set Aside under NAICS code 423430. Interested parties must submit their responses by the deadline of October 26, 2026, at 3:00 PM.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

Lined Steel Piping InstallationThis small business set-aside subcontract involves the installation of Teflon-lined steel piping systems for prime contractors at the Army Watervliet Arsenal facility. The scope of work requires the removal of existing Kynar red piping and PVDF ancillary equipment, followed by the installation of lined pipe, flanges, instrument Ts, and hand valves. All horizontal pipe supports must be spaced according to MSS SP-58 standards, and all components must remain accessible for inspection to ensure a fully operational 300-line chrome system piping network. Managed by the Department of Defense under agency W6QK Acc Wva, the project falls under NAICS code 238220. The solicitation was posted on October 9, 2026, with a response deadline of October 26, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Aluminized Chain Link and Galvanized Framework SupplyThis small business set-aside subcontract, issued by the Department of Defense under agency W6QK Acc Wva, involves the supply and delivery of industrial fencing materials for prime contractors working at the Army Watervliet Arsenal facility. The scope of work requires the provision of 7 foot tall 2 inch mesh 9 gauge aluminized chain link fabric, aluminized barbwire, and 40 weight galvanized industrial grade framework, which must include diagonal trusses as well as top and bottom rails. All provided materials must strictly adhere to Buy American Construction Materials requirements and be delivered directly to the project site. The solicitation was posted on October 9, 2026, with a response deadline of October 23, 2026, and is categorized under NAICS code 332323.

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

Perimeter Fence Installation and ExtensionThis small business set-aside subcontract involves the installation and extension of perimeter chain link fencing at the Army Watervliet Arsenal facility for prime contractors. The scope of work requires mechanically driving fence posts to a depth of four feet and installing seven-foot tall, two-inch mesh, nine-gauge aluminized chain link fencing supported by a 40-weight galvanized industrial grade framework and topped with three strands of aluminized barbwire. The project is managed under the Department of Defense and requires strict adherence to DoD RAMP security protocols and Wage Determination NY20260002. Interested parties must respond by October 23, 2026, for this project categorized under NAICS code 238990.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Watervliet Arsenal (WVA) Perimeter Fence Extension

Solicitation # W911PT27QA005

The Army Contracting Command Watervliet Arsenal is soliciting proposals for a perimeter fence extension project at the Watervliet Arsenal in New York. This total small business set-aside effort requires the contractor to provide all construction management, labor, materials, and equipment to install approximately 327 lineal feet of new fencing. The project focuses on improving the perimeter fence around a civilian structure in the West Campus and extending the fence length at the Gillespie Gate. Technical specifications require 7 foot tall, 2 inch mesh, 9 gauge aluminized chain link fencing with a galvanized industrial grade framework featuring continuous top and bottom rails and top braces with diagonal trusses. The estimated project magnitude is between 25,000 and 100,000 dollars, with 100 percent payment bonds required if the total cost exceeds 35,000 dollars. The period of performance is 30 calendar days from the receipt of the Notice to Proceed. Award will be based on the lowest evaluated offer or best value, provided the offeror meets all material requirements and responsibility criteria under FAR 9.104. Proposals must be submitted electronically via the PIEE Solicitation Module by October 23, 2026. The contract is subject to the Davis-Bacon Act, Buy American-Construction Materials requirements, and strict DoD security and facility access protocols.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS