SPILL CLEAN-UP KIT, HAZ

SPILL CLEAN-UP KIT,HAZARDOUS MATERIAL
SPILL CLEAN-UP KIT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RECOVERED MATERIAL CONTENT
FSC 4235 SORBENTS
1. IN ACCORDANCE WITH RCRA SEC. 6002, EPA,
40 CFR 247, EXECUTIVE ORDER 13514, AND
FAR 23.400 ALL SORBENTS SHALL CONTAIN 100
PERCENT RECOVERED MATERIAL CONTENT.
2. AT THE TIME OF SOLICITATION, RECOVERED
MATERIAL CERTIFICATION IN ACCORDANCE WITH
PROCUREMENT CLAUSE 52.223-4 IS REQUIRED.
3. AFTER CONTRACT AWARD, ESTIMATE OF PERCENTAGE
OF RECOVERED MATERIAL CONTENT FOR EPA
DESIGNATED PRODUCTS IN ACCORDANCE WITH
PROCUREMENT CLAUSE 52.223-9 IS REQUIRED.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
COMPLETE ENVIRONMENTAL PRODUCTS INC 1F5T7 P/N CEP/JAG-328
NEW PIG CORPORATION 1JA49 P/N KIT315
SAFE-TECH SOLUTIONS LLC 1TKG2 P/N STS-WCK328
SPE4A7-26-T-750A
SECTION B
PR: 7018379377 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018379377 0001 KT 3.000
NSN/MATERIAL:4235014400726
DELIVERY (IN DAYS):0118
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
"PRESERVATION & PACKAGING SHALL BE
I/A/W THE LATEST REVISION OF MILITARY
SPECIFICATION MIL-STD-2073-1 APPENDIX D,
FOR PACKAGING OF "KITS".
QUANTITIES OF THE SAME NSN/PART NUMBER OF
COMPONENTS WITHIN A KIT SHALL BE PACKAGED IAW
NSN PACKAGING REQUIREMENTS, THEN MARKED
IAW MIL-STD-129.
PLACE CONTENTS OF THE KIT IN ONE (1) BOX,
ENSURING THE BOX IS SUFFICIENT TO PREVENT DAMAGE
TO CONTENTS OF KIT.
CONTENTS MUST BE CUSHIONED AS NECESSARY TO
PREVENT MOVEMENT AND DAMAGE OF CONTENTS. EACH
BOXED KIT MUST CONTAIN A CONTENTS LIST
CONSISTING OF COMPONENT PART NSNS, PART NUMBER
AND QUANTITY PER KIT. BOX SHALL BE MARKED AND
BAR CODED IAW MIL-STD-129.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
SPE4A7-26-T-750A
SECTION B
PR: 7018379377 PRLI: 0001 CONT’D
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/21/2027 Original Required Delivery Date:01/21/2027
SPE4A7-26-T-750A NSN/Part Number: 4235-01-440-0726 Quantity: 3 KT Purchase Request: 7018379377QTY: 3 Delivery: 118 days ADO