SPILL CONTAINMENT KIT,

SPILL CONTAINMENT KIT,HAZARDOUS MATERIAL
REFILL, SPILL CLEAN KIT
HYDROPHOBIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FSC 4235 SORBENTS
1. IN ACCORDANCE WITH RCRA SEC. 6002, EPA,
40 CFR 247, EXECUTIVE ORDER 13514, AND
FAR 23.400 ALL SORBENTS SHALL CONTAIN 100
PERCENT RECOVERED MATERIAL CONTENT.
2. AT THE TIME OF SOLICITATION, RECOVERED
MATERIAL CERTIFICATION IN ACCORDANCE WITH
PROCUREMENT CLAUSE 52.223-4 IS REQUIRED.
3. AFTER CONTRACT AWARD, ESTIMATE OF PERCENTAGE
OF RECOVERED MATERIAL CONTENT FOR EPA
DESIGNATED PRODUCTS IN ACCORDANCE WITH
PROCUREMENT CLAUSE 52.223-9 IS REQUIRED.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
UNIT OF ISSUE = EACH (EA), ONE EA EQUATES TO HAZARDOUS MATERIAL
SPILL CLEAN-UP REFIL KIT
SPILL REFILL KIT CONTAINING:
30 Oil Only Pillows 12 inch x22 inch 20 Oil Only Socks 4 inch x 3 inch 15 Oil Only Socks 6 inch x 3 inch 4 Pair Silver Shield Gloves 4 Tyvek QC Coveralls 2 Pair Goggles 1 Putty Repair Stick 1 Floor Sign 1 Non-Sparking Shovel
SPE4A7-27-T-1996
SECTION B
6 Disposal Bags 6-mil 1 Emergency Response Book Effective for hydrocarbons spills. Also suitable for high wind areas such as Tarmac use. Product is specially designed for closed loop recycling system with additives & virgin cellulose. Item is 100% non-toxic. Kit weight 200 lbs. Absorbency per kit up to 250 gallons of hydrocarbons, depending on viscosity.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
SAFE-TECH SOLUTIONS LLC 1TKG2 P/N STS-002SK
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018861985 0001 EA 3.000
NSN/MATERIAL:4235013982590
DELIVERY (IN DAYS):0147
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
"PRESERVATION & PACKAGING SHALL BE I/A/W THE LATEST REVISION OF MILITARY SPECIFICATION MIL-STD-2073-1 APPENDIX D, FOR PACKAGING OF "KITS".
QUANTITIES OF THE SAME NSN/PART NUMBER OF COMPONENTS WITHIN A KIT SHALL BE PACKAGED IAW NSN PACKAGING REQUIREMENTS, THEN MARKED IAW MIL-STD-129. PLACE CONTENTS OF THE KIT IN ONE (1) BOX, ENSURING THE BOX IS SUFFICIENT TO PREVENT DAMAGE TO CONTENTS OF KIT.
SPE4A7-27-T-1996
SECTION B
PR: 7018861985 PRLI: 0001 CONT’D
CONTENTS MUST BE CUSHIONED AS NECESSARY TO
PREVENT MOVEMENT AND DAMAGE OF CONTENTS. EACH
BOXED KIT MUST CONTAIN A CONTENTS LIST
CONSISTING OF COMPONENT PART NSNS, PART NUMBER
AND QUANTITY PER KIT. BOX SHALL BE MARKED AND
BAR CODED IAW MIL-STD-129.
PARCEL POST ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
Need Ship Date:03/30/2027 Original Required Delivery Date:03/30/2027
SPE4A7-27-T-1996 NSN/Part Number: 4235-01-398-2590 Quantity: 3 EA Purchase Request: 7018861985QTY: 3 Delivery: 147 days ADO