This Solicitation opportunity from Department Of Defense was posted on September 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SPOON, MEASURING

Closed

SPE2DH-26-T-6977Federal

Submission Closed09/29/2026, 12:00:00 PM CDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334513

New

International

Automatic Particle Counters

Solicitation # W8485-279680/A

The Department of National Defence is soliciting offers for the procurement of 150 automatic particle counters to replace legacy Parker Hannifin icountLCM20 units. This diagnostic equipment is critical for the Royal Canadian Air Force to perform real-time contamination analysis on aviation fuels and high-pressure hydraulic systems, supporting flight safety and predictive maintenance in both fixed-base and deployed environments. The units must be factory-calibrated to ISO 11171 standards, report contamination codes per ISO 4406:2021, and be delivered in dedicated transit cases with a minimum IP66/67 rating and MIL-STD-810H certification for shock and vibration. Deliverables include the hardware, user manuals, sustainment guides, and individual calibration certificates, with final delivery to 25 Canadian Forces Supply Depot in Montreal under Free Carrier Incoterms 2020. The contract will be awarded to the compliant offer with the lowest adjusted price, with a 10% price reduction applied to Canadian suppliers for evaluation purposes only. Bidders must submit their proposals in three sections covering technical, financial, and administrative requirements. Technical compliance is mandatory, including specific requirements for high-pressure live sampling and transit durability. Packaging and marking standards vary by contractor origin, requiring adherence to MIL-STD-2073 for US firms, D-LM-008-001/SF-001 for Canadian firms, and NATO TL8100-0100 for EU firms. The contract period extends from the date of award to two months following delivery, and the successful contractor must comply with strict anti-forced labour and human trafficking regulations.

Department of National Defence

POSTED

DEADLINE

WY Bull Lake Wetland Mitigation, Monitoring & ReportThe Bureau of Reclamation, under the Department of the Interior, has issued a forecast for the WY Bull Lake Wetland Mitigation, Monitoring and Report project within the Missouri Basin. This initiative focuses on the essential mitigation and reporting requirements necessary for wetland management in the Bull Lake area. The procurement is categorized under NAICS code 334513 and is managed by Jennalyn Kent, who serves as both the primary point of contact and the Small Business Specialist. While specific set-aside details and performance locations are not yet defined, the forecast provides a preliminary timeline for the agency's acquisition needs regarding these environmental monitoring services.

Bureau of Reclamation

POSTED

DEADLINE

EC - MTE U1Air Gap Monitoring SystemThe Bureau of Reclamation, under the Department of the Interior, is forecasting a contract for the EC - MTE U1 Air Gap Monitoring System at Missouri Basin. This project involves the implementation of a specialized system designed to measure the distance between the stator and rotor of U1 during operation. The primary objective is to provide early detection of rotor misalignment, thermal expansion issues, and mechanical instability to prevent catastrophic equipment failure. The procurement is categorized under NAICS code 334513 and was posted on November 6, 2026. Interested parties may coordinate with David Bryan or Small Business Specialist Jennalyn Kent for further information regarding this requirement.

Bureau of Reclamation

POSTED

DEADLINE

WY GL GU Upgrade Monitoring InstrumentsThe Bureau of Reclamation, under the Department of the Interior, has issued a forecast for the replacement and upgrade of monitoring instruments at the Glendo and Guernsey Dams within the Missouri Basin. This project is categorized under NAICS code 334513, focusing on the procurement and installation of specialized instrumentation to ensure the continued safety and operational efficiency of these critical water infrastructure assets. The procurement process is managed by Jennalyn Kent, who serves as both the primary point of contact and the Small Business Specialist for the acquisition. While specific set-aside details and performance locations are not yet finalized, the forecast indicates a planned posting date in November 2026.

Bureau of Reclamation

POSTED

DEADLINE

Manufacturing of Rate of Flow Indicator SubassemblyThis subcontract involves the manufacture and supply of Rate of Flow Indicator Subassemblies for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating parts according to TDP Rev A Gen 1 and Hersey Measurement Co P/N RN-12 specifications. All deliverables must undergo quality assurance testing in compliance with MIL-STD-1916 or ASQ H1331, and materials must be strictly mercury-free per IP056 and NAVSEA 5100-003D standards. The scope of work explicitly prohibits the use of additive manufacturing in the production process. The contractor is required to deliver fully completed and tested subassemblies. This project falls under NAICS code 334513, with the place of performance located at FPO 96616.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Ambient Temperature Sensors (NSN 6685-01-534-8253)This subcontract involves the manufacture or procurement of 14 ambient temperature sensors meeting NSN 6685-01-534-8253 specifications for the Department of Defense. The supplier must ensure zero non-conformances in accordance with MIL-STD-1916 or ASQ H1331 and strictly prohibit the use of mercury or mercury compounds. All units are to be delivered FOB Origin to DLA Distribution DDSP New Cumberland. Compliance requirements include adherence to NIST SP 800-171 for data security and MIL-STD-129 and MIL-STD-2073-1E for marking and packaging standards. The contract is managed under NAICS code 334513 through the DLA Weapons Support ASC Supplier Oper OEM Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Digital Display Indicator ManufacturingThis subcontract involves the manufacture and supply of 213 Digital Display Indicators for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. Production must strictly adhere to Reference Drawing NR 18876 13659831 Revision DTD 12/17/2024, with final delivery designated for DLA Distribution DDSP in New Cumberland, Pennsylvania. The contractor is required to maintain DFARS 252.204-7012 cybersecurity compliance and follow specific logistics standards, including packaging per TQ IP025 or ASTM D3951 and labeling according to MIL-STD-129. This effort falls under NAICS code 334513 and is managed under the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Fluid-Hydraulic Pressure Transducer SupplierThis subcontract involves the supply of 22 fluid-hydraulic pressure transducers to prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. The supplier is responsible for manufacturing or sourcing components that strictly adhere to NSN/FSC 015616511/6695 specifications. All deliverables must be handled according to rigorous military and federal standards, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and hazardous materials labeling in compliance with 29 CFR 1910.1200. The contract is categorized under NAICS code 334513 and specifies delivery terms as FOB Destination Other, with the place of performance located in Tracy, California. Interested parties should note the response deadline of November 16, 2026, to ensure all requirements for this maritime supply chain procurement are met.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Motional Pickup Transducers (NSN 6695-01-688-0599)This subcontract, issued by the Department of Defense DLA Weapons Support ASC, requires the supply of 48 Motional Pickup Transducers under NSN 6695-01-688-0599. The contract is a total small business set-aside under NAICS code 334513, with performance located in San Diego. All units must be packaged according to ASTM D3951 standards and sourced exclusively from original equipment manufacturers or authorized distributors to ensure compliance with MIL-STD-1916 zero-based sampling plans. To be eligible, the supplier must maintain ISO 9001:2015 certification and CMMC Level 2 compliance. Additionally, the contractor must be part of the US/Canada Joint Certification Program to handle ITAR and EAR regulated data. The response deadline for this requirement is November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

First Article Testing (FAT) for Globe ValvesThis subcontract involves performing First Article Testing (FAT) on a single globe valve unit to support prime contractors delivering DLA Weapons Support Maritime Hardware. The primary objective is to execute specific FAT protocols to validate technical compliance and ensure that manufacturing processes meet all required standards. The final deliverables for this engagement include a comprehensive FAT Test Report and the validated valve unit. The project is managed under the Department of Defense at the DDSP New Cumberland Facility. Due to the nature of the technical data involved, the contractor must hold JCP certification for handling export-controlled information and maintain CMMC Level 2 or NIST SP 800-171 compliance. Responses for this opportunity are due by November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Anemometer Supply (NSN 6680-01-610-9155)This subcontract involves the procurement of two critical application anemometers, identified by NSN 6680-01-610-9155, to support prime contractors on DLA Weapons Support ASC projects. The selected provider is responsible for the manufacture or sourcing of these instruments, ensuring strict adherence to quality sampling standards per MIL-STD-1916 or ASQ H1331. The contract mandates specialized marking according to MIL-STD-129 Special Marking Code 05 and packaging requirements defined by MIL-STD-2073-1E and RP001. Once fully tested, marked, and packaged, the two units must be delivered to DLA Distribution DDSP New Cumberland. This effort falls under NAICS code 334513 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Pressure Indicators (NSN 6685-01-618-9691)This subcontract involves the procurement of 11 new and unused pressure indicators, identified by NSN 6685-01-618-9691, for prime contractors working on DLA Weapons Support ASC projects. The selected provider is responsible for manufacturing or sourcing the units in accordance with zero-based sampling plans per ASQ H1331 or MIL-STD-105/ASQ Z1.4. All items must be free of mercury compounds and adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E, MIL-STD-129, and RP001 palletization requirements. The contract is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. Final delivery of the units is required at the DLA Distribution DDSP facility located in New Cumberland, Pennsylvania. The opportunity is categorized under NAICS code 334513, with a response deadline set for November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 4 days

AI Contract Overview

Solicitation SPE2DH-26-T-6977 is a request for quotes issued by the Department of Defense, specifically the DLA Troop Support Medical Supply Chain, for the procurement of one plastic measuring spoon under NSN 6640-01-070-7877. The required item features a 0.375 inch inside cavity diameter, a 0.5 gram capacity, and a rod-type handle measuring 3 inches long, 0.313 inches wide, and 0.125 inches thick. The delivery is required within 20 days after receipt of order, with the place of performance and delivery located in Davenport, Iowa. The contract mandates commercial packaging per ASTM D3951 and marking in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. All quotes must be submitted through the DIBBS system, and the government will not evaluate offers utilizing additive manufacturing unless specifically authorized. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Inspection and acceptance will occur at the destination per FAR 52.246-2.

General Info

DoD request for one plastic measuring spoon delivered to Davenport, Iowa within 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

NAICS

334513 - Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

Place of Performance

3440 NORTH DIVISION STREET, DAVENPORT, IA, 52806-5426, USA

Set-Aside

NONE

Documents

19 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 22

Solicitation

Response DeadlineSep 29

Deadline has passed

Submission Closed

09/29/2026, 12:00:00 PM CDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH

Office AddressUSA

Contacts

Tina Vu

contact@example.gov

+1 (555) 000-0000

Full Description

SPOON,MEASURING
SPOON, MEASURING, PLASTIC
INSIDE DIAMETER OF CAVITY: 0.375 IN.;
ROD TYPE HANDLE,3 IN. LONG,0.313 IN.
WIDE,0.125 IN. THICK; CAPACITY: 0.5
GRAMS; 0.398 INCHES NOMINAL; FLAT
.
UNIT OF ISSUE EACH (EA)
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6640-01-070-7877 Quantity: 1 EA Purchase Request: 7018431423QTY: 1 Delivery: 20 days ADO