Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SPRING, HELICAL, COMP

Active
SPE7L1-26-T-945YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 18 helical compression springs with NSN 5360-01-377-9544 under solicitation SPE7L1-26-T-945Y, with a response deadline of August 20, 2026, and a delivery requirement of five days after delivery order issuance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA packaging standards, and all supplies must be free of government identification upon rejection. The use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements, and any substitute chemicals must be submitted for approval unless explicitly authorized. Asbestos is forbidden in all components, and any alternative materials must undergo formal approval per Clause L30 and Provision 4 conditions. The contract is managed by the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the primary point of contact, and performance is expected within the United States.

General Info

18 helical springs under NSN 5360-01-377-9544, delivery in 5 days, no ozone-depleting chemicals or asbestos, DLA standards apply.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332613 - Spring ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-945Y for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING,HELICAL,COMP
SPRING,HELICAL,COMPRESSION
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5360-01-377-9544 Quantity: 18 EA Purchase Request: 7017803937QTY: 18 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-943K
The contract is for a single helical compression spring identified by NSN 5360-01-248-1585, with a delivery requirement of 10 days after award. The solicitation number is SPE7L1-26-T-943K, issued on August 9, 2026, with responses due by August 20, 2026, under a federal procurement process managed by the Department of Defense’s Land Supply Chain. The item is intended for performance at Fort Bragg, North Carolina, and the procurement falls under NAICS code 332613 for spring manufacturing. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with applicable revisions controlled by the solicitation issuance or award date depending on acquisition type. Packaging must comply with DLA packaging standards and any non-accepted supplies must have government identification removed prior to return. The primary point of contact is Kristina Derry, reachable via email and phone provided, and all relevant information is accessible through the DIBBS portal.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L3-26-T-168Q
The contract is for a single helical compression spring with part number 670184552 and NSN 5360-01-198-8082, to be delivered within 20 days of award. The solicitation number is SPE7L3-26-T-168Q, issued by the Department of Defense under the Land Supplier Opns Vehicle Spt organization, with a response deadline of August 20, 2026. The item is governed by DLA packaging and technical requirements, which are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the spring or its direct contact surfaces, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents. Portable fluorescent lamps or instruments containing mercury must be shock-proof and feature a secondary containment boundary in compliance with NAVSEA 5100-003D. Removal of government identification is required from non-accepted supplies, and the contractor is Roper Whitney Inc of Rockford, IL. All contractual obligations are subject to the terms outlined in the DLA procurement framework, with the point of contact for inquiries being Lee Miller at the provided email and phone number.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-947G
The contract is for 1,263 helical compression springs with NSN 5360-00-770-4949 under solicitation SPE7L1-26-T-947G, with a deadline for response on August 20, 2026, and delivery required within 18 days of award. The item is classified under NAICS code 332613 and is being procured by the Department of Defense’s Land Supply Chain through the DLA. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and all supplies must be free of government identification if rejected. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Asbestos is not permitted in any components, and alternative materials must be reviewed and approved under Clause L30 and Provision 4 conditions. The place of performance is Phoenix, Arizona, with Chelsea Cunningham listed as the primary point of contact for inquiries.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, TORS
Solicitation # SPE7L1-26-T-946F
This contract specifies the procurement of a helical torsion spring with part number 7521423 and NSN 5360-00-752-1423, under solicitation SPE7L1-26-T-946F. A total of 1,520 units are required to be delivered FOB origin within 102 days, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special markings. The item is designated as a critical application item and must adhere to technical specifications referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or comparable zero-based methods, assigning verification levels or AQLs based on attribute classification. Mercury and mercury-containing compounds are prohibited except in specified functional components like batteries, fluorescent lamps, and instrument controls, which must include secondary containment as per NAVSEA 5100-003D. The contract enforces full and open competition, and all deliverables must meet the technical drawing revision dated June 11, 2026. Delivery is to Industries of the Blind Inc in Greensboro, NC, with shipping governed by DLA procedural notes, and the required ship date is December 1, 2026, against an original delivery deadline of February 14, 2027.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L3-26-T-168H
This contract is for the procurement of a single helical compression spring identified by NSN 5360-01-200-0414, with a delivery requirement of 20 days after order. The solicitation number is SPE7L3-26-T-168H, issued by the Department of Defense through the Land Supplier Operations Vehicle Support organization, with a response deadline of August 20, 2026. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, and the applicable revision is determined by the solicitation issue date or award date depending on the acquisition size. The supplier, Roper Whitney Inc. of Rockford, IL, must ensure no intentional addition of mercury or mercury-containing compounds to the product or its packaging, except for specific permitted uses such as batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier in compliance with NAVSEA 5100-003D. All government identification must be removed from non-accepted supplies, and performance is to be conducted at FPO, ZIP 96632. Primary point of contact is Lee Miller at the provided email and phone number.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, EXTE
Solicitation # SPE7LX-26-U-9361
This contract specifies the procurement of a helical extension spring with NSN 5360-01-507-8261 and part number 1881880 under solicitation SPE7LX-26-U-9361, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The requirement calls for 65 units delivered FOB origin within 104 days with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, while palletization adheres to DLA’s RP001 packaging requirements, with all technical and quality standards from the DLA Master List taking precedence over ASTM standards. The unit of issue is each, priced at $65.00 per unit, totaling $4,225, and this is an estimated quantity not guaranteed for full purchase by the IDC. The contract is part of a simplified acquisition and is governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date, which supersedes any conflicting specifications. All government identification must be removed from non-accepted supplies, and the delivery terms strictly enforce origin point shipment with destination inspection. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, under NAICS code 332613 for spring manufacturing. Primary point of contact is Theodore Misiolek, and all logistics and packaging details align with DLA’s standardized procedures as outlined in their official documentation and unit of issue reference tables.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332613
New
DIBBS
SPRING, FLAT
Solicitation # SPE7L1-26-T-946D
The contract pertains to the procurement of one flat spring with NSN 5360-01-648-4859 under solicitation SPE7L1-26-T-946D, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 20 days of award, and responses must be submitted by August 20, 2026. The solicitation incorporates technical and quality requirements referenced in the DLA Master List, with applicable revisions controlled by the solicitation issue date. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The item involves technical data subject to export controls under ITAR or EAR, with strict limitations on access and disclosure to unauthorized foreign persons, including foreign nationals employed by U.S. entities. Access to controlled data requires approved JCP certification, completion of designated DLA training, and formal authorization. The place of performance is Fort Sill, Oklahoma, and the primary point of contact is George Mitchell at DLA, reachable via email and phone. The NAICS code is 332613, indicating classification under Other Spring Manufacturing.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-943L
The contract is for the procurement of 10 helical compression springs with NSN 5360-01-439-2296 and part number 3913581906, supplied by Parker Hannifin Corporation. Delivery is required within five days of order placement, FOB origin, with no quantity variance allowed. Inspection and acceptance occur at the destination location, and the springs must be packaged in accordance with ASTM D3951, though any conflicting requirements from the DLA Master List of Technical and Quality Requirements take precedence. All packaging and labeling must comply with MIL-STD-129, and palletization must adhere to DLA’s packaging requirements. Shipment must be sent by the fastest traceable means, excluding parcel post, and delivered to the designated DLA facility in Texarkana, Texas. The unit of issue is each, with a total price of $10.00 per unit. The contract is issued under solicitation SPE7L1-26-T-943L, with a required delivery date of August 6, 2026, and must be fulfilled by a supplier certified to meet federal defense supply standards. Government marking, tracking, and reporting codes are embedded in the shipment instructions for accountability and logistics tracking.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-944Z
The contract pertains to the procurement of 46 helical compression springs, identified by NSN 5360-00-535-8852 and part number 11319, manufactured by MID-AMERICA AEROTECH, LLC. The item is designated as a critical application item and must comply with stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers incorporated into the contract. Sampling and inspection procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise specified, and attributes are to be classified with predefined verification levels or AQLs. The springs must be marked in accordance with MIL-STD-130N and packaged per MIL-STD-2073-1E with specified preservation methods, wrapping materials, and unit containers, with palletization conforming to DLA packaging standards. Marking must adhere to MIL-STD-129 with no special marking code applied. Delivery is required FOB origin within 27 days, with a need ship date of August 18, 2026, and the final destination is Arizona Industries for the Blind in Phoenix, AZ. Inspection and acceptance occur at the destination, and the quantity permitted has zero variance. The contract is issued under solicitation SPE7L1-26-T-944Z with a response deadline of August 20, 2026, and is managed by the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-635G
The contract pertains to the procurement of 31 units of a SPACER, RING with NSN 5365-00-068-0254 under solicitation SPE4A7-26-T-635G, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within five days of award, with a response deadline of August 17, 2026. The item is subject to multiple stringent technical and quality requirements, including the Defense Logistics Agency’s packaging standards, inspection and acceptance at origin, and mandatory physical marking of the bare item. The supplier must comply with export control regulations under ITAR or EAR, as the technical data associated with this item is classified and cannot be disclosed to foreign persons without prior authorization from the Department of State or Commerce; access is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and explicit DLA authorization. Additional requirements include CMMC Level 2 certification for the third-party assessment organization, adherence to the DLA Master List of Technical and Quality Requirements, and specific documentation procedures for source approval. The place of performance is identified as Clearfield, Utah, with a ZIP code of 84016, and Keyanna McNeil-Johnson is the primary point of contact for the solicitation.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-944H
The contract specifies the procurement of 20 helical compression springs with NSN 5360-00-535-8852 and part number 11319 manufactured by MID-AMERICA AEROTECH, LLC, under solicitation SPE7L1-26-T-944H. The item is classified as a critical application item subject to stringent quality and identification standards, including compliance with MIL-STD-130N for U.S. military property marking. All supplies must adhere to DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, with specific packaging methods including dry preservative treatment, GB wrap, and unit containerization as BE OPI, packed in intermediate containers of no more than 25 units, and marked in accordance with MIL-STD-129. Sampling and inspection procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise noted, and critical, major, and minor attributes are to be verified at levels VII, IV, and II respectively. The delivery is set for 165 days after order, FOB origin, with destination as both inspection and acceptance point. The final delivery address is Arizona Industries for the Blind in Phoenix, AZ, with a required ship date of February 2, 2027. The contract enforces a strict zero percent variance on quantity and requires adherence to all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-943Z
The contract is for 10 helical compression springs with NSN 5360-01-535-5579 and part number DGMT0005, supplied by DILLON AERO, INC. under solicitation SPE7L1-26-T-943Z, with a required delivery date of August 5, 2026, and a 20-day delivery window from the origin point. The items must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over applicable industry standards like ASTM D3951. Packaging must follow MIL-STD-129 and DLA’s packaging guidelines under RP001, including palletization and labeling standards, and must not use parcel post—shipment must occur via the fastest traceable means. The springs are subject to MIL-STD-130N for identification marking and require compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Delivery is FOB origin to the specified military address at Fort Campbell, Kentucky, with no quantity variance permitted. Documentation for source approval must be provided per RC001, and government identification must be removed from non-accepted supplies per RQ011. Covered defense information rules apply under RD002. The unit of issue is each, priced at $10.00 per unit, totaling $100.00, and the contract incorporates all specified DLA requirements without shelf-life constraints.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 339999
New
DIBBS
NON-NSN ITEM
Solicitation # SPE7L1-26-T-943E
The contract pertains to a non-NSN item with part number 5GQU3FMRB1003N1820A3E10B3SSP1P8 sourced from COTTERMAN CO USA located in Croswell, Michigan, with a total quantity of two units to be delivered in 20 days. Delivery is FOB destination with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling, with palletization adhering to DLA’s RP001 packaging requirements, and packaging unit quantity specified as one per unit pack. The destination for delivery and marking is Camp Carroll, Waegwan, Korea, under the W50YED code, with transportation governed by DLAD Proc Notes C19 and C20. The contract reference is SPE7L1-26-T-943E, with an original required delivery date of August 7, 2026, and a purchase request number of 7017798068. The unit price is not provided but the total cost is implied as two units at the listed price line, with government use indicators and procurement details including the DLA point of contact and contract type classified as a solicitation.
All Other Miscellaneous Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7L1-26-T-944L
This contract specifies the procurement of one unit of a box and accessories identified by NSN 2540015981937 under solicitation SPE7L1-26-T-944L, with a required delivery within five days of award and a firm delivery date of August 4, 2026. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications including ASTM D3951 for packaging. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements, with hazardous materials packaged according to TQ requirement IP025 if classified per FED-STD-313. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval unless explicitly permitted by the specification. The item is to be delivered FOB origin with no quantity variance permitted, inspected and accepted at destination, and must be shipped via the fastest traceable means, excluding parcel post. Shipping instructions direct delivery to the DLA Distribution Management Office in Yermo, California, with an alternate parcel post address in Barstow, California. The unit of issue is each, priced at $1.00, with total value of $1.00, and the contract includes strict government-use identifiers and tracking data for logistics coordination.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CLAMP, HUB
Solicitation # SPE7L1-26-T-947J
The contract pertains to the procurement of six CLAMP, HUB units under solicitation SPE7L1-26-T-947J, with a firm delivery deadline of 20 days after order placement. The acquisition is governed by stringent Department of Defense standards, including compliance with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, where the applicable revision is controlled by the solicitation issue date. Cybersecurity requirements mandate CMMC Level 2 certification through an approved Third-Party Assessment Organization, ensuring robust information protection practices. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Contractors must hold a valid US/Canada Joint Certification Program credential, complete mandatory DOD export control training, and receive explicit approval from DLA to access controlled data, with DFARS 252.225-7048 fully applicable. Additionally, government identification must be removed from any non-accepted supplies. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 333613. Point of contact is Kristina Derry, reachable via email and phone provided.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336350
New
DIBBS
DISK ASSEMBLY
Solicitation # SPE7L1-26-T-945B
The item under contract is a disk assembly manufactured through a forging process, with stringent technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements. Critical welding per Drawing 10861595 must meet specifications outlined in Drawing 12479550, including mandatory preproduction submission of the contractor’s welding procedure specification. Inspection and acceptance must occur at the manufacturer’s facility, with technical verification required—count, kind, and condition inspections are prohibited. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified, and critical, major, and minor attributes are assigned verification levels or AQLs as defined. The product is classified as a critical application item and must not contain Class I ozone-depleting chemicals; any substitutes require prior approval. Configuration changes require formal engineering change proposals or variance requests. Packaging must comply fully with MIL-STD-2073-1E and MIL-STD-129, with specific materials and methods detailed, and palletization aligned with DLA requirements. Final delivery is FOB origin, with no tolerance for quantity variance, and the item must be delivered by January 11, 2027, to the DLA distribution facility in New Cumberland, Pennsylvania. The solicitation is set aside for Women-Owned Small Businesses under NAICS code 336350, with unit price of $58.00 for a total of 58 units, and the contract data references the full technical documentation controlled by multiple drawing revisions dating back to 1965 and updated through 2022.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335312
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L1-26-U-0557
The contract pertains to the procurement of a power supply with part number TH-4322, supplied by Arnold Magnetics Corporation under solicitation SPE7L1-26-U-0557, with a total quantity of 10 units at a unit price of $10.00, delivered FOB origin within 127 days. The item is covered under a Total Small Business Set-Aside and is classified as a critical application item. It must comply with DLA packaging requirements including MIL-STD-2073-1E and MIL-STD-129 for marking, and all bare items must be marked with the contract number, NAWC CAGE code, and part number unless superseded by technical drawings. Technical and quality requirements are incorporated by reference from the DLA Master List, and sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited except for specific functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical analysis reagents specified by NAVSEA, and any portable items containing mercury must include shockproof construction and secondary containment per NAVSEA 5100-003D. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and cybersecurity compliance requires a CMMC Level 2 self-assessment. The NSN is 6130014614336, the unit of issue is EA, and the inspection and acceptance points are at destination with zero variance allowed on quantity.
Motor and Generator Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332111
New
DIBBS
GUIDE, CAM FOLLOWER, FO
Solicitation # SPE7L1-26-T-946Y
The contract pertains to the procurement of a Guide, Cam Follower, Folding Floor, identified by NSN 5340-01-540-4920 and part number 7017777897, with a quantity of 64 units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating specific R and I numbered provisions including packaging standards, removal of government identification from non-accepted supplies, and qualified products or manufacturers lists. The item must comply with stringent quality assurance protocols, including mandatory Certificates of Quality Compliance and Metal Certification, which are to be submitted as part of the Contract Data Requirements Lists. Sampling and inspection are to follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels or AQLs based on criticality. Technical documentation, including drawings and quality assurance provisions, is referenced under Revision D of the Technical Data Package dated through 2025. Delivery is FOB origin with inspection and acceptance occurring at destination, and packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with no special marking. The product must be palletized according to DLA packaging directives and shipped to the designated facility in Tracy, California. The delivery deadline is 116 days from contract award, with an original required delivery date of April 7, 2027, and a need ship date of February 5, 2026. The unit price is $64.00, resulting in a total contract value of $4,096, and the solicitation was issued under SPE7L1-26-T-946Y with responses due by August 20, 2026.
Iron and Steel Forging

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
INJECTOR ASSEMBLY, F
Solicitation # SPE7L1-26-T-946Q
The contract is for one fuel injector assembly, part number 4928260 with NSN 2910-01-710-6138, designated as a critical application item under solicitation SPE7L1-26-T-946Q. The item must be delivered in a single unit within 20 days, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging codes and methods outlined including unit container E5 and intermediate container E5. Palletization must follow RP001 DLA packaging requirements, and no special marking is required. The delivery destination is the Navy Expeditionary Logistics Support Group in Williamsburg, Virginia, but parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. The original required delivery date is August 10, 2026, and the contract includes project code ZH9 TP 2 and government-use identifiers for tracking. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and falls under NAICS code 336310 for motor vehicle parts manufacturing, managed by the Department of Defense's Land Supply Chain.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
PROPELLER SHAFT WIT
Solicitation # SPE7L1-26-T-944M
The contract pertains to the procurement of a propeller shaft with a universal joint, identified by NSN 3010-01-122-5657 and part number 13026540, supplied by GE Aviation Systems LLC and Whippany Actuation Systems LLC. Eight units are required to be delivered within 165 days from the order date, with delivery terms set as FOB origin and inspection and acceptance occurring at the destination. The items must be packaged in strict compliance with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for marking and labeling. Packaging must follow RP001 DLA Packaging Requirements for Procurement and be palletized accordingly. The contract includes mandatory compliance with CMMC Level 2 cybersecurity self-assessment and applies to covered defense information as outlined in RD002. Pricing is fixed at $8.00 per unit for a total of $64.00, with zero variance allowed in quantity. The delivery destination is DLA Distribution Red River in Texarkana, TX, with the required ship date set for February 2, 2027. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, whose controlling revision depends on the acquisition type and solicitation amendment dates. The contract is issued under solicitation SPE7L1-26-T-944M, with a primary point of contact at DLA for inquiries.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 322219
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-944J
This contract under solicitation SPE7L1-26-T-944J specifies the procurement of 52 units of a COVER, ACCESS item with NSN 5340-01-322-3592, to be delivered FOB origin within 74 days of contract award with no variance allowed in quantity. All items must comply with strict technical, quality, and packaging standards including MIL-STD-2073-1E for preservation and MIL-STD-129 for marking, with no special markings required. The product is classified as a critical application item and must adhere to the technical drawing revision B dated 01/20/2023. Zero tolerance is enforced for non-conformances in sampling, requiring zero defects under MIL-STD-1916 or comparable zero-based plans, with attributes assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract prohibits the use of ozone-depleting chemicals and mercury or mercury-containing compounds in any part of the product, preservation, packaging, or marking, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and approved chemical reagents, all of which must incorporate secondary containment if used. Packaging must meet DLA’s requirements including palletization and shipping standards, with delivery directed to the specified warehouse in Tracy, CA. The contract enforces configuration change management and requires formal requests for any deviations or waivers. Quality assurance allows for a Certificate of Conformance unless overridden by a Quality Assurance Letter of Instruction. This is a total small business set-aside under NAICS 322219 with full and open competition, and all documentation references the DLA Master List of Technical and Quality Requirements. The delivery deadline is December 6, 2026, with an original ship date of November 3, 2026.
Other Paperboard Container Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-943J
The contract is for a single O-RING with NSN 5331-01-378-8578, required for delivery within 20 days ADO under solicitation SPE7L1-26-T-943J, issued on August 9, 2026, with proposals due by August 20, 2026. The item is to be delivered to Fort Bragg, North Carolina, and the solicitation is managed by the Department of Defense’s Land Supply Chain through Kristina Derry at DLA. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, where technical specifications referenced by R or I numbers are incorporated by full text from the DLA website. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for approved functional uses such as batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. All non-accepted supplies must have government identification removed prior to return, and the NAICS code 339991 applies to this procurement.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L1-26-T-945T
This contract pertains to the procurement of 50 units of a firearm component identified by NSN/Part Number 0001S00000053 under solicitation SPE7L1-26-T-945T, with a delivery deadline of 300 days after contract award. The item is subject to stringent technical, quality, and compliance requirements under the DLA Master List of Technical and Quality Requirements, including configuration control via engineering change proposals and variance requests. The supplier must meet tailored quality standards applicable to both manufacturers and non-manufacturers and comply with inspection and acceptance procedures conducted at origin. Components must be sourced from qualified products or manufacturers listed on approved QPLs or QMLs, and the supplier must adhere to DLA packaging specifications. The item is classified as a Category I munition, requiring compliance with militarization protocols and the removal of government identification from non-accepted items. The contract imposes strict controls on technical data, classifying it as subject to ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons regardless of location. Only DLA contractors with JCP certification, completed export control training, and official DLA authorization may access this data. The use of ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval. The supplier must also maintain CMMC Level 2 certification as a C3PAO and hold phosphate coating supplier certification. All work must comply with the technical and quality provisions referenced in the DLA Master List, with revisions determined by the solicitation issue date. The point of contact for inquiries is Miguel Acevedo, and performance is to occur in New Cumberland, PA.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details