This Solicitation opportunity from Department Of Defense was posted on May 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SPRING, HELICAL, COMP

Closed

SPE7L1-26-T-627AFederal

Submission Closed06/08/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332613

New

DIBBS

SPRING, HELICAL, COMPThe contract involves the procurement of 24 units of a helical compression spring, identified by the National Stock Number 5360-00-345-4492. The solicitation, numbered SPE4A5-26-T-239U, was issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 15, 2026, with a response deadline of June 23, 2026. This contract is a federal solicitation intended to source these specific components, though details about set-asides, NAICS codes, or specific location of performance are not provided. The contract emphasizes the purchase of helical compression springs, which are typically used in mechanical systems to absorb or exert force. The solicitation ensures that interested vendors must submit their responses within the specified timeframe to be considered. The official contract and response access is managed through the Defense Logistics Agency's bidding platform. No additional contact information or detailed delivery specifics are outlined in the available data.

Defense Logistics Agency

POSTED

DEADLINE

STRAP, RETAININGThe contract pertains to the procurement of 10 units of a retaining strap, identified by the National Stock Number 5340-01-714-0681. The solicitation is issued by the Defense Logistics Agency, part of the Department of Defense, under solicitation number SPE7L1-26-T-707A. The solicitation was posted on June 15, 2026, and responses are due by June 26, 2026. This opportunity is a federal government solicitation and is not designated as a set-aside for any specific business category. Although specific location details for the office or place of performance are not provided, the contract reflects standard federal procurement procedures for supply chain needs within the Department of Defense. Interested parties can access further details and submit their responses through the provided electronic procurement platform link.

Defense Logistics Agency

POSTED

DEADLINE

SPRING, HELICAL, COMPThis contract pertains to the procurement of six units of a helical compression spring identified by the National Stock Number 5360-01-655-2453. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, was posted on June 15, 2026, with a response deadline of June 26, 2026. The contract was solicited under the number SPE7L1-26-T-706P and is categorized as a federal solicitation without any specific set-aside designation. The contract does not specify detailed location information for the office address or place of performance, and no designated point of contact is provided within the data. The focus is strictly on acquiring these specialized springs to meet the Department of Defense's requirements, ensuring timely submission from qualified contractors interested in fulfilling the agency’s needs. The solicitation is accessible through the Defense Logistics Agency’s electronic bidding system for further details and submission.

Defense Logistics Agency

POSTED

DEADLINE

SPRING, HELICAL, COMPThe contract pertains to the procurement of eight helical compression springs with the NSN/Part Number 5360-01-203-2536. The solicitation, identified by the number SPE4A5-26-T-097M, was issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 15, 2026, with a response deadline of June 18, 2026. It is a federal solicitation, but no specific type of set-aside or NAICS code is indicated. The contract data does not specify detailed location information for the place of performance or office address, and there is no point of contact listed. The procurement addresses a specific need for helical compression springs, and interested parties could access more information or respond to the solicitation via the provided online link on the Defense Logistics Agency’s bidding platform.

Defense Logistics Agency

POSTED

DEADLINE

SPRING, GAS TURBINEThis contract involves the procurement of 34 units of gas turbine springs, specifically identified by the National Stock Number 5360-00-615-0594. The solicitation, numbered SPE4A1-26-T-2322, was posted on June 14, 2026, with responses due by June 22, 2026. The purchase request tied to this contract is 7017148645. The contracting agency is the Defense Logistics Agency, operating under the Department of Defense, and the contract is classified as a federal solicitation. While specific details regarding location, NAICS code, or set-aside types are not provided, the contract is managed through the DLA’s procurement system, indicating a federal-level acquisition for defense purposes.

Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 6 days

AI Contract Overview

This contract establishes the procurement of two units of helical compression springs, identified by part number 7791265 and NSN 5360-00-870-2117, under solicitation number SPE7L1-26-T-627A. The springs must conform to the technical and quality requirements set forth by the Defense Logistics Agency (DLA) Master List, current as of the solicitation date. Packaging, marking, and palletization must comply with specified military standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special markings required. The contract specifies zero tolerance for quantity variation and mandates inspection and acceptance at origin. Delivery is required within 20 days of contract award, with FOB origin terms, shipping to the Ordnance Readiness Development Center in Jiji Township, Nantou, Taiwan. Quality assurance protocols include sampling governed by MIL-STD-1916 or equivalent standards, with classification of attributes as critical, major, or minor, each assigned specific verification levels and acceptance quality limits. The contract prohibits the intentional use or contact of mercury or mercury-containing compounds with the supplied hardware, except for narrowly defined exceptions. Compliance with defense-related information protection requirements is referenced, and full and open competition rules apply. The contracting office is the Department of Defense's Land Supply Chain organization, with Kristina Derry as the point of contact for this solicitation, posted in late May 2026 with a response deadline in early June 2026.

General Info

Procurement of two DLA-compliant helical springs, delivery in 20 days, strict quality and packaging standards.

Agency

Department Of Defense → LAND SUPPLY CHAIN

NAICS

332613 - Spring Manufacturing View NAICS

Place of Performance

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-627A Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 28

Solicitation

Response DeadlineJun 8

Deadline has passed

Submission Closed

06/08/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

Office AddressUS

Contacts

Kristina Derry

contact@example.gov

+1 (555) 000-0000

Full Description

SPRING,HELICAL,COMP
SPRING,HELICAL,COMPRESSION
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
FULL AND OPEN COMPETITION APPLY
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
IAW BASIC DRAWING NR 19200 7791265
REVISION NR F DTD 05/30/1980
PART PIECE NUMBER: 7791265
SPE7L1-26-T-627A
SECTION B
PR: 7016954161 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016954161 0001 EA 2.000
NSN/MATERIAL:5360008702117
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FREIGHT FORWARDER:
MULTIPLE FORWARDERS EXIST. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
BTWG00
ORDNANCE READINESS DEVELOPMENT
CENTER
JIJI TOWNSHIP
NANTOU TAIWAN 55243
TW
MARKFOR
BTWG00
ORDNANCE READINESS DEVELOPMENT
CENTER
JIJI TOWNSHIP
NANTOU TAIWAN 55243
TW
M/F: (TCN) BTWG5361462086
SPE7L1-26-T-627A
SECTION B
PR: 7016954161 PRLI: 0001 CONT’D
RDD: 204
PROJ: TP 2
SUPP ADD: BA4BER SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A01 DIST: B04 ADV: 2L FC: YY
Need Ship Date:00/00/0000 Original Required Delivery Date:06/02/2026
SPE7L1-26-T-627A NSN/Part Number: 5360-00-870-2117 Quantity: 2 EA Purchase Request: 7016954161QTY: 2 Delivery: 20 days ADO