Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SPRING, HELICAL, COMP

Active
SPE7L1-26-T-959MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation from the Department of Defense Land Supply Chain agency is for the procurement of 35 helical compression springs, identified by NSN 5360-00-480-6406. The contract requires delivery within 614 days after order and is categorized under NAICS code 332613. Performance is located in Phoenix, Arizona, and the primary point of contact is Mary Capezzuti. Compliance with several technical and quality requirements is mandatory, including DLA packaging standards and the removal of government identification from non-accepted supplies. The contractor must meet CMMC Level 2 certification and adhere to strict export controls under ITAR and EAR regulations. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.

General Info

DoD procurement of 35 helical compression springs for delivery in Phoenix, Arizona.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332613 - Spring ManufacturingView NAICS

Place of Performance

515 N 51ST AVENUE NUMBER 130 DOCK 2, PHOENIX, AZ, 85043, USA

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-959M.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
MARY CAPEZZUTI
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING,HELICAL,COMP
SPRING,HELICAL.COMPRESSION
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5360-00-480-6406 Quantity: 35 EA Purchase Request: 7014815227QTY: 35 Delivery: 614 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332613
New
DIBBS
SPRING, HELICAL, EXTE
Solicitation # SPE7L1-26-T-959C
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of one helical extension spring under part number 5360-01-496-0635. The contract requires delivery within 161 days after the order is placed. The primary point of contact for this requirement is Chelsea Cunningham. Compliance with several strict technical and security standards is mandatory. The supplier must adhere to DLA packaging requirements and CMMC Level 2 certification. Furthermore, the item is subject to ITAR and EAR export controls, meaning technical data cannot be shared with foreign nationals without prior authorization. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE4A6-26-T-16DJ
This contract is for the procurement of 14 helical compression springs, identified as Boeing Company part number L6311124-005 and NSN 5360-01-196-4012. The items are designated as critical application items and must be delivered to Arizona Industries for the Blind in Phoenix, Arizona, with a required delivery date of August 6, 2028. The agreement mandates strict adherence to quality and security standards, including CMMC Level 2 self-assessment, ISO 9001:2015 for manufacturers, and specific DLA technical and quality requirements. Packaging must comply with ASTM D3951 and MIL-STD-129, while sampling and inspection will follow MIL-STD-1916 or ASQ H1331. The contract specifies a zero percent quantity variance and requires destination inspection and acceptance.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-962L
This contract is for the procurement of 19 helical compression springs, identified by NSN 5360-01-249-7800 and part number 4050055 from Draeger Inc. The order is designated as a critical application item with a required delivery date of March 5, 2027, and a delivery window of 192 days. Shipping is FOB Origin with inspection and acceptance occurring at the destination, specifically Industries of the Blind Inc. in Greensboro, North Carolina. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Environmental restrictions are in place prohibiting the intentional addition of mercury or the use of Class I ozone depleting chemicals. Additionally, the contractor must maintain supply chain traceability documentation and comply with regulations regarding the removal of government identification from non-accepted supplies and the handling of covered defense information.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-959H
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of six helical compression springs under part number 5360-00-317-4297. The contract requires delivery within 20 days after receipt of order. Technical and quality standards are governed by the DLA Master List, with specific adherence to packaging requirements and the removal of government identification from non-accepted supplies. Strict material prohibitions are in place, banning the use of class I ozone depleting chemicals and asbestos. Additionally, the intentional addition of mercury or mercury-containing compounds is prohibited, with limited exceptions for specific functional components like batteries or sensors as specified by NAVSEA. Any substitute chemicals or alternative materials must be submitted for official approval.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-961H
This contract is for the procurement of eight helical compression springs, identified by NSN 5360005979324 and associated with Ward Leonard CT LLC part numbers 102.52-2 and 17426-2. The order is managed under solicitation SPE7L1-26-T-961H by the Department of Defense Land Supply Chain. Delivery is required by April 10, 2027, with a delivery window of 228 days. The items are to be shipped FOB Origin to Industries of the Blind Inc in Greensboro, North Carolina. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. It includes a critical prohibition against the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. Quality and technical requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the delivery.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, EXTE
Solicitation # SPE7M0-26-T-040K
This contract is for the procurement of two helical extension springs, identified by NSN 5360-01-162-3710 and part number 153-003-E-052, manufactured by Maxim Evaporators of America, LLC. The item is designated as a critical application item and must be delivered to the Puget Sound Naval Shipyard in Bremerton, Washington, within five days. Shipping must be handled via the fastest traceable means, and parcel post is strictly prohibited. The agreement incorporates several DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. A strict prohibition is placed on the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components. The contract is managed by the Maritime Supply Chain ESOC Buys under the Department of Defense.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L3-26-T-173T
This contract is for the procurement of four helical compression springs, identified by NSN 5360-01-734-0164 and Eaton Aerospace part number 973415. The items are designated as critical application items and must be delivered to the USA Depot in Corpus Christi, Texas, within five days. The agreement specifies a zero percent quantity variance and requires inspection and acceptance at the destination. The supplier must adhere to several DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and strict guidelines regarding the exclusion of mercury compounds. Documentation for source approval and the handling of covered defense information are also required. Shipping must be conducted via the fastest traceable means, excluding parcel post, to meet the required delivery date of July 7, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7M2-26-T-6222
This solicitation, issued by the Department of Defense Nuclear Reactor Program under number SPE7M2-26-T-6222, is for the procurement of 27 helical compression springs, identified by NSN 5360-01-301-1176. The contract is a total small business set-aside under NAICS code 332613, with a required delivery timeframe of 105 days after receipt of order. Performance is designated for Greensboro, North Carolina. The agreement mandates strict adherence to DLA packaging requirements and technical quality standards as specified in the DLA Master List. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components as defined by NAVSEA. All non-accepted supplies must have government identification removed per requirement RQ011.
NUCLEAR REACTOR PROGRAM

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-959B
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 87 helical compression springs under part number 5360-00-961-5820. The contract is designated as a total small business set-aside under NAICS code 332613, with a required delivery timeframe of 47 days after receipt of order. Performance is to be executed in Phoenix, Arizona. The agreement is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. It also includes a mandate for the removal of government identification from any non-accepted supplies. Interested parties must respond by August 24, 2026, to the primary point of contact, Derek Roberts.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, WARHEAD GUID
Solicitation # SPE7L1-26-T-461V
This contract is a solicitation for the procurement of five units of warhead guided springs, identified by NSN 5360-01-266-3197. The requirement is issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-461V, with a delivery deadline of five days after receipt of order. The procurement is conducted through full and open competition. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and origin-based inspection and acceptance. Environmental restrictions are heavily emphasized, prohibiting the use of class I ozone depleting chemicals, asbestos, and the intentional addition of mercury, except where functionally required for specific systems. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling methods, and the contractor must ensure all covered defense information is protected.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332613
New
DIBBS
SPRING, FLAT
Solicitation # SPE7L1-26-T-963N
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 102 flat springs under National Stock Number 5360-01-511-1670. The contract is designated as a Total Small Business Set-Aside under NAICS code 332613, with a delivery requirement of 179 days after the order is placed. Performance is located in Phoenix, Arizona, and the primary point of contact is George Mitchell. Compliance with specific technical and quality standards is mandatory, including DLA packaging requirements and MIL-STD-130N for the identification marking of U.S. military property. The agreement also stipulates the removal of government identification from any non-accepted supplies. Responses to solicitation SPE7L1-26-T-963N must be submitted by August 24, 2026.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, CONSTANT FOR
Solicitation # SPE7L3-26-T-173N
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 191 constant force springs under NSN 5360-00-534-9617. The contract is designated as a Total Small Business Set-Aside under NAICS code 332613, with a delivery requirement of 104 days after the order is placed. Performance is centered in Greensboro, North Carolina. The agreement is subject to specific technical and quality requirements, including RA001, RP001 for packaging, and RQ011 regarding the removal of government identification from non-accepted supplies. Interested parties must respond by August 24, 2026, in accordance with the solicitation number SPE7L3-26-T-173N.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332994
New
DIBBS
SIGHT, FRONT
Solicitation # SPE7L1-26-T-966D
This contract, solicitation number SPE7L1-26-T-966D, is for the procurement of 275 units of front sights, identified by NSN 1005-01-689-7880 and Heckler & Koch Defense Inc. part number 51000246. The requirement is designated as a critical application item and is set aside for total small business. Delivery is required within 452 days, with an original required delivery date of August 12, 2026, and a need ship date of November 20, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing supply chain traceability documentation and the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA packaging requirements. Inspection and acceptance will take place at the destination. The procurement is managed by the Department of Defense Land Supply Chain agency under NAICS code 332994.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333618
New
DIBBS
REPAIR KIT, DIESEL ENGI
Solicitation # SPE7L1-26-T-965Z
This contract is a solicitation for the procurement of four diesel engine repair kits, specifically part number PA12655725 from Fairbanks Morse, LLC, under NSN 2815017274689. The requirement is issued by the Department of Defense Land Supply Chain as a total small business set-aside. Delivery is required within 165 days, with a specified need ship date of February 6, 2027, to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-2073-1 and MIL-STD-129. Key stipulations include a zero percent quantity variance and a prohibition on the use of mercury or mercury compounds in preservation and packaging. Inspection and acceptance will occur at the destination, with shipping terms set as FOB Origin.
Other Engine Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
SHAFT ASSEMBLY, SHOU
Solicitation # SPE7L1-26-T-962V
This contract is for the procurement of six shoulder shaft assemblies, identified by NSN 3040-01-437-5481, for use on Arleigh Burke class DDG ships. The items are designated as critical application items and are associated with Morpac Industries part numbers 20003, 80053, and 80053-2. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards, with delivery scheduled for DLA Distribution San Joaquin in Tracy, California, by June 27, 2027. Technical compliance requires that no mercury or mercury-containing compounds be intentionally added to the hardware, with specific exceptions for functional components like batteries or sensors as specified by NAVSEA. The contract specifies a delivery timeline of 306 days, with inspection and acceptance occurring at the destination. Shipping is FOB Origin, and the procurement is managed under solicitation SPE7L1-26-T-962V by the Department of Defense Land Supply Chain.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE7L1-26-T-960N
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 591 knobs under part number 5355-00-839-2138. The contract requires delivery within 161 days after the order is placed. The place of performance is located in Tracy, California, and the response deadline for the solicitation is August 24, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and the removal of government identification from non-accepted supplies. Contractors must maintain supply chain traceability documentation per DLA Directive C03. Additionally, the contract prohibits the use of class I ozone depleting chemicals and asbestos in all delivered items, requiring any substitute materials to be approved in accordance with established clauses.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326211
New
DIBBS
TUBE AND FLAP
Solicitation # SPE7L1-26-U-0508
Solicitation SPE7L1-26-U-0508 is an Indefinite Delivery Contract issued by the Defense Logistics Agency (DLA) Land Supply Chain for the procurement of 151 units of Tube and Flap (NSN 2620-00-544-7141). The contract has a maximum value of 350,000.00 dollars and requires delivery within 82 days after receipt of order. Terms are FOB Destination, with inspection and acceptance occurring at the origin. The award is based on a trade-off process considering price and other technical factors, with a guaranteed minimum quantity of 22 units. The contractor must adhere to strict regulatory and technical requirements, including CMMC Level 2 certification and DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR or EAR export controls, requiring approved US/Canada Joint Certification Program certification for access. The items are classified as Type I shelf-life products with a non-extendable 60-month expiration period. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and all hazardous materials must be labeled per the OSHA Hazard Communication Standard. Additionally, ocean transportation is mandated via U.S.-flag vessels, and the use of Class I ozone-depleting chemicals is prohibited. Invoicing and receiving reports must be processed electronically through Wide Area WorkFlow (WAWF).
Tire Manufacturing (except Retreading)

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336350
New
DIBBS
YOKE, UNIVERSAL JOIN
Solicitation # SPE7L1-26-T-959S
This contract is for the procurement of one universal join yoke, identified by NSN 2520015782290 and Daimler Truck North America part number TDA 250TYS38 2A. The order is managed by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-959S. Delivery is required within 20 days, with a final required delivery date of March 2, 2026, shipped FOB Origin to a facility in Memphis, Tennessee. The supplier must adhere to specific DLA technical and quality requirements, including RP001 for packaging and MIL-STD-129 for marking and labeling. Packaging must follow ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. Inspection and acceptance will occur at the destination, and the shipment must be sent via the fastest traceable means, explicitly excluding parcel post.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE7L1-26-T-966A
This contract is for the procurement of 140 machine bolts, identified as commercial items with NSN 5306151797372 and Iveco Defence Vehicles S.P.A. part number 98495527. The solicitation, issued by the Department of Defense Land Supply Chain, requires delivery to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of April 15, 2027. The terms specify a delivery timeline of 237 days and a strict quantity variance of plus or minus 0 percent. Technical and quality compliance is governed by the DLA Master List, including specific requirements for packaging, palletization, and the removal of government identification from non-accepted supplies. Packaging must adhere to ASTM D3951 and MIL-STD-129 standards. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-962S
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 113 O-rings under part number 5331-01-415-1376. The contract requires delivery within 128 days after the order is placed and specifies that no asbestos, as defined in FED-STD-313, is permitted in the items. Performance is centered in New Cumberland, Pennsylvania, and the procurement falls under NAICS code 339991. The agreement incorporates specific technical and quality requirements as outlined in the DLA Master List, including RP001 for packaging and RQ011 regarding the removal of government identification from non-accepted supplies. The solicitation number is SPE7L1-26-T-962S, with a response deadline of August 24, 2026. Primary coordination for this requirement is managed by Chelsea Cunningham.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE7L1-26-T-959Q
This contract is a solicitation for the procurement of 334 flat washers, identified by NSN 5310-20-000-0953 and General Dynamics Land Systems Canada part number 10626362. The items are designated as critical application items and must be delivered to DLA Distribution Albany in Georgia. The delivery timeline is set for 35 days after order, with a need ship date of September 29, 2026, and an original required delivery date of February 6, 2027. The agreement mandates strict adherence to DLA technical and quality requirements, specifically referencing packaging standards ASTM D3951 and MIL-STD-129, as well as DLA packaging requirements for procurement. Shipping is established as FOB Origin, with both inspection and acceptance occurring at the destination. The contract allows for zero quantity variance and requires the removal of government identification from any non-accepted supplies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339999
New
DIBBS
NON-NSN ITEM
Solicitation # SPE7L1-26-T-957V
Contract SPE7L1-26-T-957V is a federal procurement issued by the Department of Defense Land Supply Chain for 40 units of a non-NSN item, part number 1047025P11. The contract is awarded to TLD America USA, located in Windsor, Connecticut. Delivery is required within 5 days after receipt of the order, with an original required delivery date of August 12, 2026. The shipment is designated as FOB Destination, with both the inspection and acceptance points set at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The final freight shipping destination is located at Yokota AB in Japan, and the parcel post address is directed to APO AP 96328-5120.
All Other Miscellaneous Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-965X
This solicitation is for the procurement of 169 helical compression springs under NSN 5360-13-116-3839 for the Department of Defense Land Supply Chain. The contract requires delivery within 241 days after receipt of order and is managed under NAICS code 334519. Performance is centered in Greensboro, North Carolina, with the solicitation period running from August 12 to August 24, 2026. The contractor must adhere to several strict technical and quality requirements, including the maintenance of supply chain traceability documentation and the submission of source approval requests. There is a total prohibition on the use of class I ozone depleting chemicals and asbestos in the supplied items. Additionally, the contract mandates compliance with DLA packaging requirements and the removal of government identification from any non-accepted supplies.
Other Measuring and Controlling Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details