Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SPRING, HELICAL, COMP

Active
SPE7L3-26-T-144YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a single helical compression spring with NSN 5360-01-625-7141 under solicitation SPE7L3-26-T-144Y, with a delivery requirement of 20 days after award. The technical and quality requirements governing this item are defined by referenced DLA Master List documents identified by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment specifies a later revision. The contractor must comply with DLA packaging standards, retain supply chain traceability documentation as mandated by DLAD Procurement Notes C03 from August 2016, and ensure removal of government identification from non-accepted supplies. The item must be free of asbestos and must not contain any ozone-depleting chemicals; any substitutes must be approved unless explicitly authorized by the specification. Documentation for source approval must be submitted, and all material and process substitutions are subject to approval under Clause L30 and Provision 4 conditions. The contract is managed by the Department of Defense’s Land Supplier Operations Vehicle Support agency, with point of contact Lee Miller, and the place of performance is FPO with ZIP 09591. Responses are due by August 13, 2026, and the solicitation was posted on August 2, 2026.

General Info

Procure one helical compression spring, NSN 5360-01-625-7141, deliver in 20 days, meet DLA specs, no asbestos or ozone-depleting chemicals.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

UNIT 100108 BOX 1, FPO, AE, 09591, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L3-26-T-144Y for DLA Land and Maritime Vehicle Support

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
LEE MILLER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING,HELICAL,COMP
SPRING<(>,<)> HELICAL<(>,<)> COMPRESSION
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. "ITEMS SUPPLIED MUST BE FREE OF ASBESTOS. LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE WITH CLAUSE L30 AND PROVISION 4 CONDITIONS FOR NSN/Part Number: 5360-01-625-7141 Quantity: 1 EA Purchase Request: 7017334331QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
LEVER, BREECHBLOCK, COCK
Solicitation # SPE7L4-26-T-5956
The contract specifies the procurement of 37 LEVER, BREECHBLOCK, COCKING components identified by NSN 1005-13-116-2146 under solicitation SPE7L4-26-T-5956, with a delivery deadline of 178 days after award. The item is classified as a defense article subject to the International Traffic in Arms Regulations (ITAR) and the Arms Export Control Act, requiring all manufacturers and exporters to be registered with the Directorate of Defense Trade Controls. Failure to provide proof of DDTC registration will render any offer ineligible for award. Technical data associated with the item is export-controlled under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program credentials, completed DOD export control training, and DLA authorization. The procurement is subject to strict packaging standards, prohibition of ozone-depleting chemicals, and cybersecurity requirements mandating CMMC Level 2 certification. Government identification must be removed from non-accepted supplies, and demilitarization procedures apply as the item falls under Category I munitions. The contract is managed by the Department of Defense's Combat Vehicles and Armament office, with performance directed to Cherry Point, North Carolina, and primary contact information provided for inquiries.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
DIBBS
FITTING FLAP
Solicitation # SPEFA1-26-T-0263
The fitting flap is a Navy-identified critical safety item requiring strict adherence to technical and quality standards, with all waiver or deviation requests needing direct approval from the DLA Contracting Officer. The item must be marked in compliance with MIL-STD-129, including lot and serial numbers, contractor and actual manufacturer Cage codes, and part number 123CSM10130-518 across all identified suppliers. Quality assurance follows SAE AS9100 and the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. Sampling must conform to MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise specified, and critical attributes are verified at the highest level. The item has no shelf life requirement and is subject to inspection and acceptance at origin. Packaging must meet ASTM D3951 but is fully governed by DLA’s RP001 and MIL-STD-129, with palletization and unit packing strictly controlled. The contract calls for four units to be delivered FOB destination within 84 days, with no variance allowed in quantity. Delivery is to the Naval Base Coronado in San Diego, with parcel post directed to Naval Air Station North Island. This solicitation is a total small business set-aside under NAICS code 488190, awarded under contract SPEFA1-26-T-0263, with a required delivery date of July 31, 2026.
DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
DIBBS
Overseas Logistics & Delivery (OCONUS & FMS)The contract supports international logistics, customs clearance, and delivery operations for overseas and Foreign Military Sales destinations under FOB Destination terms, ensuring seamless movement of defense-related assets to international recipients. Responsibilities include managing end-to-end transportation, navigating complex customs regulations in multiple countries, and guaranteeing timely and compliant delivery to final destinations as specified by the U.S. Department of Defense. The work is performed under a subcontract aligned with the NAICS code for other support activities for transportation, directly serving the needs of the Defense Logistics Agency. All activities must adhere to strict U.S. government standards for international defense shipments, with performance expected to meet mission-critical timelines and security protocols without regard to geographic boundaries.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 488190
New
DIBBS
Overseas (OCONUS and FMS) Delivery Logistics
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 488190
New
DIBBS
TUBE ASSEMBLY
Solicitation # SPEFA5-26-T-0947
The contract is for the procurement of two tube assemblies, identified by part number 901-060-380-101 and NSN 1560-LL-CFQ-B165, manufactured to drawing 901-060-380 with cage code 97499. Performance is required within 95 days after order, with a firm delivery deadline of December 24, 2026, and delivery must be made FOB destination to the Fleet Readiness Center DLA at Cherry Point, North Carolina. The contract is awarded under solicitation SPEFA5-26-T-0947, issued by the Defense Logistics Agency Fleet Readiness Center, and follows streamlined acquisition procedures, with pricing set at $1.00 per unit for a total value of $2.00. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging and marking must comply with MIL-STD-129 for labeling and MIL-STD-130N(1) for identification marking, including Data Matrix barcode requirements. Palletization adheres to DLA Packaging Requirements RP001, while preservation follows ASTM D3951 unless overridden by higher-priority DLA standards. Inspection and acceptance occur at the destination, with sampling conducted using MIL-STD-1916 or a zero-defect alternative plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract incorporates numerous FAR and DFARS clauses including those for cybersecurity safeguards, trafficking in persons, employment eligibility verification, sustainable products, and electronic invoicing via WAWF. Offerors must hold a valid UEI and CAGE code, and are required to represent their small business status where applicable, with no set-aside specified. The contract type is designated to be determined upon award, referencing Alternate I of FAR 52.216-1, and delivery quantities are fixed with no variance permitted. Hazardous and radioactive materials are subject to specific notification and labeling protocols, and the contractor must comply with all federal regulations governing material safety and data handling.
DLA FLEET READINESS CENTER DLA PSC

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 488190
New
Federal
Travel Services for On-Site SupportThe contract involves cost-reimbursable travel services to support contractor personnel traveling to BIE sites for training, troubleshooting, and coordination activities, all in full compliance with the Federal Travel Regulation. This subcontract is intended to ensure that skilled personnel can effectively fulfill on-site operational needs at Bureau of Indian Education locations, with allowable costs reimbursed according to established federal guidelines. The services are scoped to cover all necessary travel-related expenses including transportation, lodging, per diem, and incidental costs incurred during official duties at designated sites. The solicitation was posted on July 31, 2026, with responses due by August 11, 2026, under the NAICS code 488190 for other support activities for air transportation, reflecting the logistical nature of the services. The contracting office is the Indian Education Acquisition Office within the Department of the Interior, and while specific performance locations are not detailed, the work is tied to BIE-operated facilities across the country. This contract structure emphasizes accountability, regulatory adherence, and the timely delivery of technical and educational support essential to the effective functioning of BIE programs.
Indian Education Acquisition Office

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 488190
New
Federal
C-12W Contractor Logistics Support Follow-on
Solicitation # N00019-26-RFPREQ-APM207-0738
The Naval Air Systems Command (NAVAIR) is preparing to solicit a follow-on Contractor Logistics Support (CLS) contract for the U.S. Marine Corps C-12W aircraft fleet, succeeding the current task order under the CMMARS contract with Vertex Aerospace LLC, which expires October 31, 2027. The requirement encompasses comprehensive maintenance, repair, supply chain management, and field support services across multiple U.S. and international locations, including sites in Japan, Germany, the Middle East, and various U.S. military bases. Offerors must demonstrate access to FAA-certified King Air 350 CER repair stations with the capability to manage government-owned assets, including APUs, landing gear, and peculiar and common support equipment, while adhering to best commercial practices. The acquisition will be structured as a competitive, indefinite-delivery/indefinite-quantity (IDIQ) contract with performance slated to begin in the fourth quarter of FY27. Industry engagement is a critical component of the planning phase, with an industry day scheduled for August 11, 2026, in California, Maryland, where attendees must register by August 6, 2026, to participate and request one-on-one meetings. A Draft Statement of Work will be distributed by August 4, 2026, and a Draft RFP is expected in October 2026, followed by a final RFP targeted for February 2027. Interested parties must submit a three-page capabilities statement addressing past performance, subcontractor management, technical expertise, small business status in accordance with NAICS code 488190, compliance with FAR 52.219-14 for work performance thresholds, access to commercial parts inventories, experience with configuration changes, ITAR/export compliance, and transition readiness within 90 days. Responses are due no later than 2:00 p.m. EST on August 6, 2026, to the designated point of contact, and all submissions must include company details and points of contact. The government emphasizes that this is purely an information-gathering effort with no obligation to procure and no funds available for response preparation.
Naval Air Systems Command

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 488190
New
Federal
F-16 Wing Pylon Rib Repair
Solicitation # FA823226QPYL
The U.S. Air Force is conducting market research to identify capable sources for repairing a corrosion issue on the F-16 Wing Pylon Rib attach fitting for F-16 Block 30, 32, 40, 42, 50, and 52 aircraft. This effort is focused on developing a repair solution that can be implemented within 12 months, performed in the field while the wing remains installed on the aircraft, and conducted by end users or Contract Field Teams and Depot Field Teams. The repair must fully resolve existing corrosion in designated areas A, B, C, and D as shown on the engineering drawing 16W112 and prevent recurrence for the remainder of the aircraft’s service life. The Government is evaluating potential vendors for their technical capability, cost structure, technology maturity, and past performance delivering similar repair services to both government and commercial customers over the past three years. Responses must include details on small business status—such as 8(a), Service-Disabled Veteran-Owned, HUBZone, or Women-Owned—and any teaming arrangements, clearly distinguishing the roles of the prime contractor from subcontractors. All interested parties must submit a signed DD Form 2345 to the program manager prior to receiving the limited distribution engineering drawings. The certification process requires coordination with the Joint Certification Office and has variable turnaround times depending on submission method, so early initiation is strongly encouraged. Once the DD Form 2345 is approved, the drawing package will be provided via secured electronic transfer with login credentials. Submissions must be received by August 14, 2026, at 5:00 p.m. Eastern Time, through the SAM.gov portal. The solicitation number is FA823226QPYL, and the NAICS code for this effort is 488190 with a size standard of $40 million. The Government aims to assess whether a competitive acquisition or a total Small Business Set-Aside is feasible based on responses received, with performance expected to occur in Richland, South Carolina, and the lead office located at Hill Air Force Base, Utah. Technical inquiries should be directed to Ryan Lambert or Yvonda Benson.
FA8232 Aflcmc Wwmk

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
Federal
USCG Air Station Kodiak Helicopter Maintenance Services
Solicitation # 20270PR260001476
The U.S. Coast Guard Air Station Kodiak in Kodiak, Alaska, is soliciting quotes for Helicopter Maintenance Services under solicitation number 20270PR260001476, issued as a combined synopsis and solicitation in accordance with FAR Part 12. The acquisition, classified under NAICS code 488190, is not set aside for small businesses and will be awarded using an SF 1449 form. The performance work statement outlines the required services, and all contractual and technical inquiries must be submitted in writing via email to Robbin Kessler by July 24, 2026, using the provided Excel template; telephone inquiries are not accepted. Responses to questions will be published as amendments on SAM.gov. A recommended but not mandatory site visit is scheduled for July 22, 2026, at the Air Station Kodiak; attendees must register their full names by July 15, 2026, and foreign nationals are prohibited from participating. Quotes are due by August 14, 2026, at 1:00 p.m. Alaska time, and must include two points of contact with name, phone number, and email. Quotes must remain valid for 30 days unless otherwise specified, and late submissions may be accepted at the government’s discretion.
Base KODIAK(00045)

POSTED

2 days ago

DEADLINE

in 16 days
View Details
NAICS: 488190
New
Federal
S201--Building Drone Cleaning
Solicitation # 36C26226Q1150
The U.S. Department of Veterans Affairs, through the VA Loma Linda Health Care System, is conducting a sources sought announcement to identify qualified small businesses capable of providing drone-based exterior building cleaning services at the Loma Linda Medical Center in California. This announcement is purely for market research and does not constitute a solicitation, request for proposals, or any obligation to award a contract. The government is seeking information from Service-Disabled Veteran Owned Small Businesses, Veteran-Owned Small Businesses, 8(a), HubZone, Women-Owned, and other small businesses with demonstrated expertise in utilizing tethered drone systems for soft wash cleaning of building facades, windows, masonry, and hard surfaces up to 175 feet in height. Respondents must provide detailed documentation including company information, Unique Entity ID, CAGE code, tax ID, small business certification status, and a capability statement not exceeding five pages that directly addresses technical qualifications, regulatory compliance, and operational capability. To be considered capable, firms must hold an active FAA Part 107 Remote Pilot Certification and, if operating drones exceeding 55 pounds, must possess an FAA Section 44807 Heavy Drone Exemption. All equipment must be NDAA-compliant with verified manufacturer and origin details, and vendors must carry UAS aviation liability insurance of at least $2 million. Vendors must also hold an OSHA 30-hour certificate and a D38 Sand and Water Blasting license, and must be registered in SAM.gov. Responses must include past performance examples with contract value, building height, and points of contact from similar projects completed within the last three years. Strict limitations on subcontracting apply: the prime contractor must perform at least 50% of the contract cost with its own personnel or similarly situated certified SDVOSB/VOSB entities, and no pass-through arrangements are permitted. Failure to submit a signed VAAR 852.219-75 Certificate of Compliance will render a response ineligible. The government will not reimburse any costs incurred in responding, and submissions must be received by July 20, 2026, at 4:00 p.m. EST, addressed to Stephanie Naron, Contract Specialist. All responses will inform future acquisition planning under the Veterans First Contracting Program, which prioritizes awards to verified SDVOSBs when the Rule of Two is met.
262-NETWORK Contract Office 22 (36C262)

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 488190
New
Federal
Global Hawk Skyrange Program Demonstration Engineering, Manufacturing, and Technical Support
Solicitation # 80AFRC26SS011
NASA Armstrong Flight Research Center is seeking engineering, manufacturing, and technical support services for the Global Hawk Skyrange Program Demonstration, focusing on the operation, maintenance, and necessary modifications to Global Hawk aircraft, ground control stations, ground support equipment, and associated spares and repairs. The contract will be awarded as a sole source to Northrop Grumman Systems Corporation under FAR 6.103-1, as the agency has determined that only this source has the unique capability to fulfill the requirements, and no other supplies or services would satisfy the government’s needs. The government explicitly does not intend to treat this as a commercial product or service acquisition under FAR Part 12. Interested parties may submit their qualifications electronically to Roxana Romero at roxana.l.romero@nasa.gov no later than August 17, 2026, at 12:00 PM PST, to assist the government in evaluating whether competitive sourcing is warranted; however, the final decision on competitiveness rests solely with the government. The solicitation number is 80AFRC26SS011, with a NAICS code of 488190, and the primary place of performance is Edwards Air Force Base in California. NASA Clause 1852.215-84, Ombudsman, applies, and contact information for the Center Ombudsman is available through the official NASA procurement website.
NASA Armstrong Flight Research Cntr

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 488190
New
DIBBS
Transportation and International Delivery CoordinationThe contract requires the coordination and execution of an expedited international shipment of a repair kit from a U.S. origin point to Storck Barracks in Germany, with a strict delivery timeline of five days or less. Shipment terms are defined as FOB origin, meaning the vendor assumes responsibility for all logistics and costs once the goods leave the point of origin, and full compliance with Department of Defense shipping protocols is mandatory. The task involves intricate international logistics, including customs clearance, documentation, and adherence to military transport standards to ensure timely and secure delivery. This subcontract is issued under NAICS code 488190, which encompasses other support activities for air transportation, and is managed by the Aviation Supply Chain ESOC Buys office within the Department of Defense. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026, leaving a limited window for potential vendors to submit proposals. The contract does not specify a set-aside type or a designated point of contact, and the place of performance is limited to the destination in Germany, with no additional performance locations noted. All activities must align strictly with DoD regulatory requirements to meet mission-critical operational needs.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

3 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 336330
New
DIBBS
WHEEL, SOLID RUBBER TIR
Solicitation # SPE7L3-26-T-143W
This contract specifies the procurement of a solid rubber tire wheel identified by NSN 2530-01-738-5293 and part number 24003207, supplied by GM DEFENSE LLC and CUSTOM WHEEL SOLUTIONS LLC, with a requirement for seven units to be delivered within 75 days under solicitation SPE7L3-26-T-143W. The item is classified as a critical application item with a non-extendable shelf life of 120 months, and it is subject to strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, including special labeling for Type I shelf life. All deliveries must be FOB origin, inspected and accepted at destination, and packaged according to DLA’s packaging requirements, with no ozone-depleting chemicals permitted under any circumstances, requiring prior approval for alternative chemicals. The contract enforces a zero variance in quantity and mandates compliance with DLA procedural notes for transportation and shipping, with all units directed to the DDSP New Cumberland facility in Pennsylvania. The procurement is a total small business set-aside under NAICS code 336330, with a unit price of $7.00, totaling $49.00, and is part of a federal acquisition managed by the Department of Defense’s Land Supplier Operations Vehicle Support office. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and the required delivery date is October 30, 2026. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions effective as of the solicitation issue date. The point of contact for inquiries is Karen McCarley, and all logistics must align with the provided DLA directives including parcel post and freight shipping addresses.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-144G
The contract pertains to the procurement of gaskets with part number 89774 and NSN 5330-00-911-3574, requiring a quantity of 240 units to be delivered within 158 days after award. All supplied items must be completely free of asbestos, and any alternative materials or substitutions must adhere to the approval guidelines specified in Clause L30 and Provision 4. The technical and quality requirements governing this procurement are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. The solicitation number is SPE7L3-26-T-144G, issued on August 2, 2026, with responses due by August 13, 2026. The contracting organization is the Department of Defense, under the Land Supplier Operations Vehicle Support, with performance located in New Cumberland, Pennsylvania, 17070-5002. The primary point of contact is Susan Diamond, reachable via email or phone. The NAICS code associated with this procurement is 339991, and the supplier is Mine Safety Appliances Co located in Pittsburgh, PA.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336211
New
DIBBS
ARMOR, TRANSPARENT, VEHI
Solicitation # SPE7L3-26-T-143V
This contract pertains to the procurement of armor, transparent vehicular window units identified by NSN 2541-01-337-2114 and part number DNC-23529-3, with a total quantity of 114 units to be delivered FOB origin within 107 days of contract award, with no tolerance for quantity variance. Delivery is mandated to the DLA Distribution facility in New Cumberland, Pennsylvania, and must comply with MIL-STD-2073-1E preservation standards and MIL-STD-129 marking requirements, including the special fragile marking code 36 indicating glass and directional handling. Packaging must adhere to DLA packaging requirements and prohibit the use of mercury or mercury compounds in preservation, packaging, and marking, with exceptions only for specific functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA, and even then, portable devices must include secondary containment per NAVSEA 5100-003D. The use of Class I ozone-depleting chemicals is strictly forbidden, and any substitutes require prior approval unless explicitly authorized by specifications. The contractor, Daimler Truck North America LLC, is required to perform a CMMC Level 2 Cybersecurity Maturity Model Certification self-assessment, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. All items must meet federal procurement standards, with inspection and acceptance occurring at the destination, and the contract is subject to DoD shipping protocols as outlined in DLAD Proc Notes C19 and C20.
Motor Vehicle Body Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
GASKET AND PREFORME
Solicitation # SPE7L3-26-T-144U
The contract involves the procurement of a gasket and preformed packing assortment identified by NSN 5330015604081 and part number 285000840051880, with a total quantity of 57 thousand units to be delivered under solicitation SPE7L3-26-T-144U. Delivery is required within 46 days of contract award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The packaging must comply with MIL-STD-2073-1E specifications, including use of preservative method 33, dry packaging, and buffering materials, while marking adheres to MIL-STD-129 with no special marking required. The packaging and palletization must follow DLA’s procurement requirements, and hazardous materials handling is governed by IP025. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, with a needed ship date of August 5, 2025, though the original required delivery date was May 15, 2025. The item is strictly prohibited from containing asbestos as defined by FED-STD-313, and government identification markings in non-accepted supplies must be removed per RQ011. Technical and quality requirements referenced in this contract are sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions. The unit of issue is KT, with no variance allowed in quantity, and all data aligns with DoD standards for procurement and logistics.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-145D
The contract solicitation for GASKET under solicitation number SPE7L3-26-T-145D requires the supply of 27 units identified by NSN 5330-01-720-6786 with a delivery deadline of 5 days after delivery order issuance. All items must be free of asbestos, and any alternative materials must adhere to the approval processes outlined in Clause L30 and Provision 4. The gaskets must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag compliant with MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation as specified for Federal Supply Classifications 5330/5331. This packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications identified with R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Compliance with MIL-STD-130N for identification marking of U.S. military property is mandatory, and any government identification on non-accepted supplies must be removed. The contract also indicates that Covered Defense Information may apply, requiring adherence to relevant security protocols. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and performance is to be delivered to Norfolk, Virginia. Point of contact is Lee Miller of the Department of Defense, Land Supplier Operations Vehicle Support.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, A
Solicitation # SPE7L3-26-T-143X
The contract is for the procurement of 155 units of a hydraulic cylinder assembly identified by NSN 3040-01-454-3533 and part number A23280Q9819, supplied by Meritor Industrial Products, LLC, for use on Model 1000M forklift trucks. The item is priced at $155.00 per unit, with a total contract value of $24,025.00, and must be delivered FOB origin within 336 days, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence of the DLA Master List of Technical and Quality Requirements. Packaging and palletization must adhere to DLA Packaging Requirements for Procurement, and the unit of issue is each. The delivery address is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and the required ship date is July 16, 2027. Transportation logistics follow DLA Procurement Notes C19 and C20. This is a total small business set-aside solicitation under NAICS code 333613, issued by the Department of Defense under contract number SPE7L3-26-T-143X, with a response deadline of August 13, 2026. All technical and quality specifications referenced via R and I numbers are governed by the DLA Master List, with revisions controlled according to acquisition scale and amendment dates.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L3-26-T-144V
This procurement under solicitation SPE7L3-26-T-144V requires the delivery of three units of item 11610607 for first article testing within 180 calendar days of contract award to a designated government facility at Tinker Air Force Base. The government will conduct formal testing and issue written approval, conditional approval, or disapproval within 180 days of receiving the units; these first article samples will not count toward the total production quantity and will be retained by the government for potential use as a manufacturing standard or destroyed during testing. The contractor must deliver the full ordered quantity separately. Bidders are strongly encouraged to quote using quantity ranges due to fluctuating demand, though this flexibility does not extend to Auto IDC. Offers must not include covered telecommunications equipment or services as prohibited by FAR 52.204-24 and DFARS 252.204-7016. Compliance with domestic sourcing restrictions under the Berry Amendment and Buy American Act is mandatory, with thresholds lowered to $150,000; non-domestic material disclosures are required. Small business joint ventures must submit applicable certifications as outlined in FAR provisions. The vendor shipment module access is transitioning to DLA’s AMPS system, and contractors must register through AMPS to maintain shipping capabilities; schema updates are required for VSM WebServices users. Additive manufacturing is currently prohibited unless specifically approved by the contracting officer. The contract involves a single line item for 142 units with a 922-day delivery window, and all proposals must be submitted via DIBBS before the deadline. Offerors who cannot respond must file a “No Bid” notice to avoid assumptions of non-responsiveness.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
CLIP, RETAINING
Solicitation # SPE7L3-26-U-0666
The contract pertains to the procurement of CLIP, RETAINING with NSN 5340-00-675-2101 and part number 55008, under solicitation SPE7L3-26-U-0666, for a quantity of 161 units at a unit price of $161.00, totaling $25,921.00. Delivery is required within 116 days FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, including adherence to MIL-STD-129 for marking and labeling, and RP001 for packaging standards. Hazardous materials must be packaged per FED-STD-313 and TQ requirement IP025; non-hazardous items must be commercially packaged. Palletization must follow DLA’s procurement packaging requirements, and government identification must be removed from non-accepted supplies. The unit of issue is each (EA), and the contract specifies DLA Direct, CONUS coverage. The solicitation was posted on August 2, 2026, with a response deadline of August 17, 2026, under NAICS code 332722, managed by the Department of Defense’s Land Supplier Operations Vehicle Support. The primary point of contact is Stephen Weaver, reachable via email and phone. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List accessible through the designated website, with revision control determined by the solicitation or award date depending on acquisition size. Delivery is not guaranteed as the quantity is estimated and may not be fully purchased by the IDC. All packaging, labeling, and unit of issue must strictly align with contract specifications and DLA directives.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
REFILL BLADE, WIPER
Solicitation # SPE7L3-26-T-144P
This contract specifies the procurement of wiper blade refills under the NSN 2540014540415, with a total quantity of 264 units to be delivered FOB origin within 78 days of contract award. The items must comply with DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129, with individual commercial skin packs acceptable as the unit packaging method. No ozone-depleting chemicals are permitted in the manufacture or incorporation of these items, and any substitute chemicals require prior approval unless explicitly authorized by specification. The contract identifies specific approved part numbers from Trico Products Corporation, AMZ Alabama Inc., and BAE Systems Tactical Vehicle Systems LP, all corresponding to the same NSN. Delivery is directed to the DLA Distribution center in New Cumberland, Pennsylvania, with no variance allowed in quantity. Inspection and acceptance occur at the destination point, and all shipments must adhere to DLA transport and freight protocols outlined in procedural notes C19 and C20. The solicitation number is SPE7L3-26-T-144P, issued by the Department of Defense’s Land Supplier Operations Vehicle Support office, with a response deadline of August 13, 2026, and a posted date of August 2, 2026. The NAICS code 336390 identifies the classification as Other Transportation Equipment Manufacturing. The primary point of contact is Amber Rohly, reachable via email and phone provided. Packaging must be palletized in accordance with DLA requirements, and the special marking code indicates no additional special markings are required. The original required delivery date is December 17, 2025, with a need ship date of December 9, 2025, aligning with the 78-day delivery window. Technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements govern performance unless modified by solicitation amendment, and simplified acquisition rules apply with the Master List revision in effect on the solicitation issue date controlling compliance.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-145C
This contract, under solicitation number SPE7L3-26-T-145C, requires the delivery of two gaskets with NSN 5330-01-714-2809 and part number PG775000-31 at a unit price of $2.00, totaling $4.00. The items must be delivered within 20 days to Moody AFB, Georgia, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination. All packaging must comply with MIL-STD-2073-1E, including specific materials and methods for preservation, wrapping, and containment, and marking must adhere to MIL-STD-129 without special codes. The gaskets must be sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments. Hazardous materials packaging rules apply, and parcel post is prohibited; shipments must use the fastest traceable means. The delivery must meet the original required date of July 16, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The contract is managed by the Department of Defense’s Land Supplier Operations Vehicle Support, with Lee Miller as the primary point of contact.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-144L
The contract pertains to the procurement of gaskets identified by NSN 5330-01-597-1378, with a total requirement of 6 units, under purchase request 7017602136, and an additional quantity of 30 units referenced in the context of a broader procurement action. Delivery must be completed within 58 days after award. The item is subject to strict packaging requirements mandating medium duty, waterproof, greaseproof, and opaque packaging in compliance with MIL-DTL-117, Type II, Class C, Style 1, specifically to protect against ultraviolet degradation, and this applies to direct vendor delivery, foreign military sales, and stock shipments. The product must be free of asbestos, with previously approved asbestos-containing codes or part numbers now rejected unless replaced by an approved alternative under Clause L30 and Provision 4 conditions. The gasket is manually excluded from the First Destination Packaging Program and is not eligible for standard commercial packaging. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size, and covered defense information provisions may apply. The solicitation, issued under SPE7L3-26-T-144L on August 2, 2026, with a response deadline of August 13, 2026, is managed by the Department of Defense under the Land Supplier Operations Vehicle Support organization, with performance location specified as Albany, Georgia, 31704-1128, and primary point of contact Susan Diamond at dla.flbb1prs@dla.mil or 6146925625.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
MOUNTING KIT, BODY, V
Solicitation # SPE7L3-26-T-144A
The contract is for the procurement of a Mounting Kit, Body, V with NSN 2510-99-702-6768 and part number KP00010 from Pearson Engineering Limited, under solicitation SPE7L3-26-T-144A. A total of seven units are required, each priced at $7.00, with a total contract value of $49.00, to be delivered FOB origin within 136 days of award, with no tolerance for quantity variance. The items must be packaged in accordance with ASTM D3951 and marked and labeled per MIL-STD-129, with all DLA Master List of Technical and Quality Requirements taking precedence over any general standards. Packaging must comply with RP001, and palletization is required as specified in DLA’s procurement guidelines. Inspection and acceptance occur at origin, and the delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania. The required ship date is December 28, 2026, aligning with the original delivery deadline. All technical and quality specifications are governed by documents referenced in the DLA Master List, and the unit of issue is each (EA), as defined by the official DLA unit of issue registry. The contract is managed by the Department of Defense’s Land Supplier Operations Vehicle Support office, with Viviane Kounkorgo as the primary point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details