Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SPRING, HELICAL, COMP

Active
SPE7M4-26-T-287ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for 12 helical compression springs identified by NSN 5360-00-229-3538 under solicitation SPE7M4-26-T-287Z, with a delivery requirement of 164 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined by the solicitation issuance or award date depending on the acquisition size. All items must comply with DLA packaging standards and must not contain any Class I ozone-depleting chemicals; substitutes require prior approval unless explicitly authorized by specifications. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs unless defined otherwise. Measuring and test equipment must be calibrated and traceable to recognized standards. The contract is issued by the Department of Defense’s Fluid Handling Division with performance located in Phoenix, Arizona, and inquiries should be directed to Rory O’Reilly at the provided contact information. The solicitation closes on August 7, 2026.

General Info

12 helical compression springs, 164-day delivery, DLA standards, zero non-conformances, no ozone-depleting chemicals.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332613 - Spring ManufacturingView NAICS

Place of Performance

515 N 51ST AVENUE NUMBER 130 DOCK 2, PHOENIX, AZ, 85043, US

Set-Aside

NONE

Documents

(1)

SPE7M4-26-T-287Z.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Rory O'Reilly
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING,HELICAL,COMP
SPRING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ADEQUATE DATA FOR NSN/Part Number: 5360-00-229-3538 Quantity: 12 EA Purchase Request: 7017603805QTY: 12 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332613
New
DIBBS
SPRINGThe contract pertains to the procurement of a spring identified by NSN 5360-01-155-1731, with a quantity of one unit, under solicitation number SPE7L1-26-T-883G. The supplier must comply with all DLA packaging and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Strict restrictions apply regarding mercury and mercury-containing compounds: they must not be intentionally added or come into direct contact with the supplied hardware, except for specific functional uses such as batteries, fluorescent lights, certain instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier as mandated by NAVSEA 5100-003D. The item must be marked in accordance with MIL-STD-130N for U.S. military property identification. Delivery is required within 20 days after contract award, and the place of performance is designated as FPO 09573. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, and the primary point of contact is Kristina Derry of the Department of Defense's Land Supply Chain, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRESThe contract is for a single helical compression spring with NSN/Part Number 5360-01-199-2106, issued under solicitation SPE7L1-26-T-884P, with a response deadline of August 10, 2026, and a required delivery within 20 days of award. The item is classified under NAICS code 332613 and falls under the Department of Defense’s Land Supply Chain, with performance to occur at FPO, 96632. The contract incorporates all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the spring or any associated hardware, except for specific exemptions such as functional mercury in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents approved by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier, as mandated by NAVSEA 5100-003D. All government identification must be removed from non-accepted supplies, and the primary point of contact is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThe contract solicits six helical compression springs with NSN 5360-01-625-1645 under solicitation number SPE7L1-26-T-879X, with a response deadline of August 7, 2026, and a required delivery time of five days after award. The item is classified under NAICS code 332613 and is being procured by the Department of Defense through its Land Supply Chain office. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones unless a subsequent amendment supersedes it. The contract mandates compliance with MIL-STD-130N for identification marking of U.S. military property and requires the removal of government identification from non-accepted supplies. All performance is to occur at Oak Harbor, Washington, ZIP 98278-5200, with Kristina Derry listed as the primary point of contact, reachable via email and phone. The solicitation is open to federal suppliers and includes no set-aside designation.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThe contract is for a single helical compression spring with NSN 5360-01-340-4132, under solicitation SPE7L1-26-T-879P, with a response deadline of August 7, 2026, and delivery required within 20 days after award. Full and open competition applies, and the item must comply with all technical and quality requirements referenced in the DLA Master List, which governs specifications based on the solicitation issue date. The product is prohibited from containing any Class I ozone-depleting chemicals, regardless of other specification allowances, and any substitute materials require prior approval. Export control regulations under ITAR or EAR apply to associated technical data, restricting disclosure to foreign persons even within the United States, and only contractors with approved JCP certification, completed DLA training, and authorized access may handle such data. DLA packaging standards and the removal of government identification from non-accepted supplies are enforced, and covered defense information protocols apply. The place of performance is FPO, 96661, with Kristina Derry of the Department of Defense’s Land Supply Chain as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, TORSIONThe contract pertains to the procurement of 564 helical torsion springs identified by NSN 5360-01-302-0919 under solicitation SPE7L3-26-U-0651, with a delivery requirement of 104 days after award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless amended. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation was posted on July 27, 2026, with responses due by August 11, 2026, and falls under NAICS code 332613 for spring manufacturing. The procuring activity is the Department of Defense through the Land Supplier Operations Vehicle Support office, with Stephen Weaver listed as the primary point of contact. The place of performance and delivery details are not specified beyond the delivery timeline, and the contract does not indicate a set-aside type.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRESThis contract specifies the procurement of a single helical compression spring with NSN 5360-01-272-1578, under solicitation SPE4A6-26-T-09UY, for delivery within 10 days of award. The item is subject to a comprehensive set of technical, quality, and packaging requirements derived from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Manufacturing and non-manufacturing suppliers must comply with tailored quality standards, packaging guidelines, and documentation requirements for source approval and physical identification of items, though item unique identification is waived per customer request. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and verification levels are assigned based on attribute criticality. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the product except for specific approved applications such as batteries, fluorescent lamps, sensors, and reagents designated by NAVSEA, with any permitted mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. All measuring and test equipment used must meet established standards, and the contract is managed by the ASC Commodities Division under the Department of Defense, with performance located at Fort Campbell and point of contact Tabitha Jackson.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThis contract pertains to the procurement of 23 helical compression springs with NSN 5360-00-999-0916 and part number 574365, supplied by ONTIC ENGINEERING & MANUFACTURING, INC and HAMILTON SUNDSTRAND CORPORATION. The springs are designated as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements for Procurement. The merchandise is to be delivered FOB origin within 87 days, with a required ship date of November 3, 2026, and the inspection and acceptance points are at the destination. No variance in quantity is permitted. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the springs or their components, except for specific functional uses in approved devices such as batteries, sensors, or weapon systems, and portable fluorescent lamps containing mercury must include a secondary containment boundary as specified by NAVSEA 5100-003D. Covered Defense Information provisions apply, and all supplies must be labeled and handled in compliance with government standards for non-accepted items. The contract is issued under solicitation SPE7L1-26-T-880R with a unit price of $23.00 per each, totaling $529.00, and the delivery address is Industries of the Blind Inc in Greensboro, NC. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the unit of issue is EA as defined by DoD standards. The supplier must comply with all applicable federal procurement regulations, including removal of government identification from non-accepted supplies. All requirements referenced through R and I numbers in the DLA Master List take precedence, and the governing revision of the Master is determined by the solicitation issue date. The contract was posted on July 27, 2026, with a response deadline of August 7, 2026, and the contracting office is under the Department of Defense’s Land Supply Chain, with Kelly Day as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThe contract solicits 11 helical compression springs with NSN 5360-01-131-8225 under solicitation number SPE7L1-26-T-880T, with a response deadline of August 7, 2026, and delivery required within 87 days after order. Full and open competition applies, and the item is classified under NAICS code 332613. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or RFP issue date for large acquisitions unless amended. Packaging must comply with DLA requirements, and any non-accepted supplies must have government identification removed. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless already authorized by specification. Technical data associated with this item is subject to export controls under ITAR or EAR, and disclosure to foreign persons—regardless of location—is restricted. Access to this controlled data is limited to contractors with approved JCP certification, completed DOD export control training, and authorized DLA approval. The place of performance is Greensboro, North Carolina, 27409, and the primary point of contact is Kelly Day of the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThis contract specifies the procurement of a single helical compression spring with NSN 5360-01-468-9912 under solicitation SPE7L0-26-Q-0282, issued by the Department of Defense through the Land Supply Chain ESOC Buys office. The item must comply with technical and quality requirements referenced from the DLA Master List, including adherence to MIL-STD-1916 or ASQ H1331 sampling protocols with zero non-conformances unless otherwise mandated, and assigned verification levels based on criticality. The spring must be manufactured without intentional addition or direct contact with mercury or mercury compounds, except for approved functional uses such as in batteries, fluorescent lamps, or specified instruments, with additional containment requirements for portable devices. Packaging must conform to MIL-STD-2073-1E and DLA Packaging Requirements, with marking per MIL-STD-129 and no special marking codes. The item is subject to a firm fixed price with zero quantity variance and must meet cybersecurity compliance through a CMMC Level 2 self-assessment. Acceptance occurs at destination, with FOB origin, and delivery is due within 60 days of award. The contract also requires compliance with covered defense information protocols and uses the DoD-authorized unit of issue. The delivered item will be shipped to USS GEORGE WASHINGTON CVN 73 at the designated FPO address, with transportation governed by DLA procedural notes, and the contract is open for full and open competition.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 333310
New
DIBBS
INSERT TOOL, RECEPTAThe contract pertains to the procurement of an INSERT TOOL ASSEMBLY with a RECEPTICAL O-RING, identified by NSN 4921-01-382-9778 and part number BA38897-01, with a required quantity of four units. Delivery must be completed within twenty days from contract award, shipped FOB origin, and inspected and accepted at the destination. Packaging must comply with ASTM D3951, but is subject to higher precedence requirements from the DLA Master List of Technical and Quality Requirements, with labeling and marking conforming to MIL-STD-129. Palletization must adhere to DLA Packaging Requirements, and the use of ozone-depleting chemicals is strictly prohibited; any substitute chemicals require prior approval unless explicitly authorized by governing specifications. The item is classified as a critical application and is subject to Covered Defense Information protocols, requiring compliance with CMMC Level 2 self-assessment standards. Shipping is directed to the Navy Submarine Torpedo Facility in Yorktown, Virginia, and must be sent via the fastest traceable means—parcel post is prohibited. The contract number is SPE7M4-26-T-289M, with a required delivery date of July 23, 2026, and the primary point of contact is Rory O'Reilly of the Department of Defense’s Fluid Handling Division.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
CLEANER, PRESSURE, SOThis contract is for the procurement of two units of a pressure cleaner under solicitation SPE7M4-26-T-289P, with a total price of $2.00 per unit and a required delivery within 20 days FOB origin. The item is identified by NSN 4940-01-497-9549 and is designated for delivery to the AWCF SSF Guam Storage Facility at Barrigada, Guam. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which are incorporated by reference, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the product, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specific chemical reagents as authorized by NAVSEA. Portable devices containing mercury must meet shockproof standards and include a secondary containment boundary per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special markings required. The contract enforces a zero variance in quantity and requires inspection and acceptance at the destination. Transportation guidelines are governed by DLAD Proc Notes C19 and C20. The action is a total small business set-aside under NAICS code 333310, with a response deadline of August 10, 2026, and the original required delivery date is July 23, 2026.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
DIBBS
COUPLING, TUBEThe contract is for the procurement of three tube couplings identified by NSN 4730-01-439-0937 and part number 19106, sourced from RITCHIE ENGINEERING CO INC. The unit price is $3.00 per piece, with a total contract value of $9.00, and delivery is required within 20 days from the contract award, delivered FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while adhering to the more stringent requirements of the DLA Master List of Technical and Quality Requirements. Packaging and labeling must follow MIL-STD-129, and palletization must conform to DLA’s packaging standards. The delivery destination is the USNS HECTOR A CAFFERATA at Dock 5, 8511 Kerns Street, San Diego, CA 92154, and shipment must be made via traceable freight—parcel post is strictly prohibited. The required delivery date is July 23, 2026, and the solicitation number is SPE7M3-26-T-7725, with the North American Industry Classification System code 332919. All technical and quality requirements referenced by R or I numbers are fully incorporated from the DLA Master List, and the version in effect at the time of solicitation issuance governs. Direct inquiries should be directed to William Cain at the provided contact information.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
COUPLING, PIPEThis contract specifies the procurement of a coupling, pipe identified by NSN 4730-01-445-0516, with a quantity of two units to be delivered within 20 days under solicitation SPE7M3-26-T-7720. The item must be supplied in strict compliance with DLA’s Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951 and MIL-STD-129 for packaging and labeling. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized by the specification. Packaging and palletization must adhere to DLA’s procurement packaging requirements and the designated Unit of Issue and Quantity per Unit Pack. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The shipment must be sent via the fastest traceable means, explicitly excluding parcel post, and directed to USNS LUCY STONE at FPO AP 96692-7200 using the designated freight shipping address and vendor identification code. The original required delivery date is July 24, 2026, and the contract includes detailed government-use identifiers, contact information for William Cain of the Fluid Handling Division, and a direct link to the DIBBS portal for solicitation details.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
UNION, PIPEThe contract pertains to the procurement of three UNION, PIPE units with NSN 4730-01-481-4242 under solicitation SPE7M3-26-T-7722, requiring delivery within twenty days of award. The items must be packaged in strict compliance with ASTM D3951 and marked per MIL-STD-129, with packaging and palletization adhering to DLA’s RP001 packaging requirements, where applicable DLA Master List of Technical and Quality Requirements supersede ASTM standards. The Unit of Issue is each (EA), quantity is fixed at three units with zero variance allowed, and delivery is FOB origin with inspection and acceptance occurring at destination. The items must be shipped via fastest traceable means, explicitly prohibiting parcel post, to the military delivery point at USNS LUCY STONE T-AO 209, FPO AP 96692-7200, with freight shipping directed to MSC BATS SAN DIEGO, 9284 BALBOA AVE, using VSM code 92123 for DLA vendors. The required delivery date is July 24, 2026, and the contract includes specific government-only identifiers for tracking and processing. All technical and quality specifications referenced are governed by the DLA Master List, with revision control tied to the solicitation issue date.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
TUBE, METALLICThe contract is for one metallic tube, identified by NSN 4710-01-654-3969 and part number 3625292, under solicitation SPE7M4-26-T-289R, with a required delivery within ten days of award. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, container types, and marking standards, and palletization must adhere to DLA packaging requirements. The item is strictly prohibited from containing any Class I ozone-depleting chemicals, and any substitute chemicals must be approved unless explicitly authorized by the specifications. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, using the revision in effect at the time of solicitation or award. The shipment must be sent by the fastest traceable means, excluding parcel post, to Fort Campbell, Kentucky, with the shipping and mark for addresses identical. The required delivery date is July 13, 2026, and the point of contact for inquiries is Rory O’Reilly of the Fluid Handling Division.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
HOUSING, GALILEAN EYEPIThe contract is for one unit of a Galilean eyepiece housing, identified by NSN 2040-01-317-1452 and part number 685B012544, supplied by Kollmorgen Corp. and L3 Technologies, Inc. with CAGE code 34228. Delivery is required within 20 days to the Trident Refit Facility at Kings Bay, Georgia, with shipment FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application, and the use of mercury or mercury-containing compounds is strictly prohibited unless explicitly exempted for functional components like batteries or specialized instruments, with additional containment requirements for portable devices. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using approved methods and materials, while avoiding plastics where possible. The contract prohibits parcel post and requires traceable freight shipping. The purchase request number is 7017643672, and the contract number is SPE7M4-26-T-289D, with an original required delivery date of July 24, 2026. All technical and quality requirements are governed by the DLA Master List, with specific provisions for environmental compliance and marking. The point of contact is Rory O'Reilly, and the solicitation closed on August 10, 2026.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETALThe contract is for a single nonmetallic hose assembly with NSN 4720-01-589-1315, requiring delivery within 10 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and any configuration changes must be submitted via an Engineering Change Proposal or a formal request for variance. Physical identification of the item is required per RQ017, though Item Unique Identification is waived per the service customer’s request under DFARS 252.211-7003(c)(1)(i). The solicitation, issued under contract number SPE7M4-26-T-289J, was posted on July 28, 2026, with responses due by August 10, 2026, and falls under NAICS code 326220. The contracting activity is the Fluid Handling Division of the Department of Defense, with Blake Tushar listed as the primary point of contact.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
FITTING, LUBRICATIONThe contract specifies the procurement of a single fitting and lubrication component with part number 3009 and NSN 4730-01-701-7933, requiring delivery of one unit within twenty days from the contract award date. Delivery is FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951, but DLA Master List of Technical and Quality Requirements take precedence and must be fully adhered to, including compliance with MIL-STD-129 for marking and labeling. Packaging must follow DLA Packaging Requirements for Procurement (RP001), and palletization must align with these same standards. The unit of issue is EA, and the contract references specific DLA procurement directives, including the removal of government identification from non-accepted supplies and the use of approved unit of issue conversions. Shipping must be via the fastest traceable means, explicitly prohibiting parcel post, with the freight destination listed as USNS OSCAR V. PETERSON, FPO AE 09592. The required delivery date is July 24, 2026, and the contract is issued under solicitation SPE7M3-26-T-7721, managed by the Department of Defense’s Fluid Handling Division with William Cain as the primary point of contact.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METALThe contract is for the procurement of a metal tube assembly with NSN 4710012976637 and part number 58430, issued under solicitation SPE7M4-26-T-289F by the Defense Logistics Agency. Two units are required to be delivered within 20 days FOB destination, with no variance allowed in quantity. Delivery must adhere to MIL-STD-2073-1E packaging standards and MIL-H-775 preservation guidelines, with packaging marked in compliance with MIL-STD-129 using the U pack code and no special marking. Mercury or mercury-containing compounds are strictly prohibited in or on the hardware unless part of approved functional components like batteries, fluorescent lamps, sensors, weapon systems, or specific chemical reagents; portable fluorescent lamps and instruments containing mercury must include a second containment boundary as per NAVSEA 5100-003D. All supplies must be delivered to the USS CHOSIN CG 65 at FPO AP 96662 via traceable transportation methods—parcel post is explicitly forbidden—and shipped using the RDD 777 procedure. The required delivery date is July 24, 2026, with the solicitation posted on July 28, 2026, and responses due by August 10, 2026. Inspection and acceptance occur at the delivery point, and all requirements align with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332996
New
DIBBS
PIPE, METALLICThe contract specifies the delivery of two metallic pipes, each with a nominal size of 2.000 inches, constructed seamless and meeting ASTM A74-05 or CISPI 301 specifications, featuring a service weight wall thickness and a 60.000-inch nominal length with a 17 hub end style, an inside diameter of 2.940 inches, and a 2.500-inch telescoping length on both ends. The pipes are not rated for maximum operating pressure or temperature and must comply with stringent marking requirements per MIL-STD-129, including the contract number, lot and serial numbers, contractor’s CAGE code, manufacturer’s code, and part number on each unit pack. Packaging must adhere to ASTM D3951 and DLA packaging requirements, with all items palletized according to RP001, and no ozone-depleting chemicals are permitted under any circumstance—substitutes require prior approval. The National Stock Number is 4710002775918, with a unit of issue of each, and a fixed quantity of two units with zero variance allowed. Delivery is FOB origin with inspection and acceptance occurring at the destination, within 20 days of the award, and must be shipped via the fastest traceable means, excluding parcel post, to Fort Bragg, North Carolina. Configuration changes require formal engineering change proposals or variance requests, and all technical and quality requirements referenced in the DLA Master List take precedence over any other standards. The required delivery date is July 24, 2026, and the contract is subject to full and open competition under solicitation SPE7M4-26-T-289C.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
New
DIBBS
KNOBThe contract pertains to the procurement of 741 units of a knob identified by NSN 5355-01-061-3013 under solicitation SPE7M4-26-Q-0890, issued by the Fluid Handling Division of the Department of Defense. Delivery is required within 88 days after award, with performance taking place at Hill AFB, Utah, 84056-5734. The item is classified as a commercial item, including commercial of a type, and must comply with all DLA packaging requirements and technical/quality specifications referenced in the DLA Master List of Technical and Quality Requirements, accessible online. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are considered major unless otherwise defined. Zero non-conformances are required in sample lots unless the contract explicitly states otherwise, and the manufacturer may choose attribute or variable inspection methods under MIL-STD-1916. Government identification must be removed from any non-accepted supplies. Responses are due by August 4, 2026, and the primary point of contact is Steven Chomos, reachable via email and phone.

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details