Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SPRING, HELICAL, COMPRES

Active
SPE7L1-26-T-904NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of seven helical compression springs identified by NSN 5360-00-854-4392, with a delivery requirement of 20 days after award. The solicitation, issued under number SPE7L1-26-T-904N, was posted on August 2, 2026, and responses are due by August 13, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. All items must comply with strict material prohibitions, including the complete exclusion of ozone-depleting chemicals and asbestos; any substitute materials must be approved unless explicitly authorized by specification. The contractor is required to maintain supply chain traceability documentation in accordance with DLA Directive Procurement Notes C03 from August 2016, and must remove government identification from non-accepted supplies. Packaging must adhere to DLA standards, and covered defense information applies to this contract, requiring appropriate safeguarding measures. The contracting office is the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.

General Info

Procure seven helical springs, deliver in 20 days, comply with DLA standards, no asbestos or ozone-depleting chemicals.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332613 - Spring ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-904N Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING,HELICAL,COMPRESSION
SPRING, HELICAL, COMPRESSION
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. "ITEMS SUPPLIED MUST BE FREE OF ASBESTOS. LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE WITH CLAUSE L30 AND PROVISION 4 CONDITIONS FOR NSN/Part Number: 5360-00-854-4392 Quantity: 7 EA Purchase Request: 7017707856QTY: 7 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332613
New
DIBBS
Supply of Helical Compression Springs (NSN: 5360-01-187-9365)The contract calls for the manufacture and delivery of five helical compression springs identified by NSN 5360-01-187-9365, compliant with military specifications and packaged in accordance with Defense Logistics Agency standards. The work is to be performed at a place of performance in Phoenix, Arizona, with an official postal code of 85043, and falls under the NAICS code 332613 for spring manufacturing. This is classified as a subcontract and is open for responses until August 13, 2026, with the solicitation posted on August 2, 2026, through the DLA's DIBBS platform. The contracting entity is the Fluid Handling Division under the Department of Defense, and full compliance with technical and packaging requirements is mandatory for acceptance.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-U-0532
The contract under solicitation SPE7L1-26-U-0532 is a Small Business Set-Aside issued by the Defense Logistics Agency’s Land Supply Chain for the procurement of 29 helical compression springs, identified by NSN 5360014252997, with a guaranteed minimum of 4 units and an estimated annual quantity of 29 units. It is structured as an Indefinite Delivery Contract with a maximum value of $350,000.00, allowing for multiple orders over a one-year period, though no unit pricing is provided, making the base value indeterminate. Delivery is required within 104 days from the date of order issuance under FOB Origin terms, with inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with stringent packaging and marking standards including MIL-STD-2073-1E for preservation and MIL-STD-129 for labeling, including barcoding and IUID requirements. No cushioning, wrapping, or preservation materials are required, but items must be clean and dry prior to packaging. Mercury and mercury-containing compounds are strictly prohibited unless used in exempted functional applications such as batteries, instruments, or weapon systems, in which case they must meet NAVSEA 5100-003D containment standards. The contract includes comprehensive Federal Acquisition Regulation clauses covering equal opportunity, trafficking in persons, employment eligibility, sustainable procurement, hazardous material handling, cybersecurity requirements including NIST SP 800-171, electronic invoicing through WAWF, and prohibitions on hexavalent chromium, covered defense telecommunications equipment, and Chinese military companies. Offerors must be registered in SAM.gov, provide a valid UEI and CAGE code, and complete socioeconomic representations confirming small business status, with affirmative responses triggering additional disclosures for joint ventures. All submissions must be delivered electronically via DIBBS or WAWF by the deadline of August 17, 2026, and must include required representations under FAR clauses including 52.219-28 and 52.222-50. The solicitation evaluates proposals based on price and other factors without specifying weights or using LPTA, and the award will go to the most advantageous offeror. Special requirements include prior submission of Safety Data Sheets for hazardous materials and compliance with all applicable technical and quality standards referenced in the DLA Master List
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-903Y
This contract pertains to the procurement of 144 helical compression springs with the NSN 5360-00-897-2679, issued under solicitation SPE7L1-26-T-903Y by the Department of Defense’s Land Supply Chain through the DLA. The delivery must be completed within 144 days after award, and the item falls under NAICS code 332613 for manufacturing spring manufacture. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contractor must comply with DLA packaging standards, retain supply chain traceability documentation per DLAD Procurement Note C03 (Aug 2016), and ensure all materials are free of asbestos and ozone-depleting chemicals, with any substitutions requiring prior approval. Government identification must be removed from non-accepted supplies, and covered defense information may apply to this contract. All documentation for source approval must be submitted as required, and the contract specifies a single point of contact for inquiries, Derek Roberts, with a response deadline of August 13, 2026. The place of performance is designated as Phoenix, Arizona, with a zip code of 85043.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-11DR
The contract pertains to the procurement of 16 flat washers with NSN 5310-01-107-4642 and part number 1K7077 supplied by CATERPILLAR INC, under solicitation SPE4A6-26-T-11DR. Delivery is required within 60 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, and packaging must follow MIL-STD-129 labeling standards alongside DLA Packaging Requirements for Procurement, with palletization adhering strictly to RP001. The unit of issue is each, with a total price of $16.00, and the goods are to be delivered to DLA Distribution Red River at Texarkana, TX. The contract mandates that government identification be removed from non-accepted supplies and requires adherence to transport protocols outlined in DLAD PROC NOTES C19 and C20. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and is managed by the Department of Defense’s ASC Commodities Division, with Bernice Adams listed as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING
Solicitation # SPE7L1-26-T-905H
The contract pertains to the procurement of a spring identified by NSN 5360-01-244-5787, with a quantity of one unit, under purchase request 7017690539. Delivery is required within five days of award, and the solicitation number is SPE7L1-26-T-905H, posted on August 2, 2026, with a response deadline of August 13, 2026. The contract incorporates all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the type of acquisition and relevant dates. For simplified acquisitions, the version in effect on either the solicitation issue date or award date controls, while larger acquisitions follow the RFP issue date revision unless superseded by an amendment. The item is to be delivered to Cherry Point, NC, 28533-8051, and the contracting office is under the Department of Defense’s Land Supply Chain. The primary point of contact is Kristina Derry, reachable via email and phone as listed. The NAICS code 332613 indicates the industrial classification for the supplier, and the procurement is classified as a federal solicitation with no set-aside designation.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING ARM
Solicitation # SPE7L1-26-T-904G
The contract pertains to the procurement of one Spring Arm unit, identified by NSN 5360-01-468-8462, under solicitation SPE7L1-26-T-904G, with a required delivery within 20 days after delivery order issuance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item involves export-controlled technical data subject to ITAR or EAR regulations, restricting disclosure to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and formal approval from DLA. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and the place of performance is listed as FPO, 96607, under the Department of Defense's Land Supply Chain. Primary point of contact is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-906A
This contract is for the procurement of 65 helical compression springs, identified by NSN 5360-01-655-2017 and part number 114T2701-12, for use in commercial certified aviation aircraft, making it a critical application item subject to Federal Aviation Administration airworthiness approval. The springs must be new and unused, with surplus material explicitly prohibited. All items must comply with stringent technical and quality requirements incorporated by reference from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and removal of government identification from non-accepted supplies. Item Unique Identification (IUID) is required per MIL-STD-130 and DFARS 252.211-7003, and marking must follow MIL-STD-129 with each unit labeled with NSN, contract number, lot number, contractor and manufacturer CAGE codes, and part number. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with no special marking or palletization beyond standard requirements. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified. Delivery is FOB origin with a 39-day lead time, to be shipped to Industries of the Blind Inc in Greensboro, NC, by September 22, 2026, under contract SPE7L1-26-T-906A. The unit price is $65.00 per spring, with no variance allowed in quantity, and inspection and acceptance occur at the destination.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING
Solicitation # SPE7L1-26-T-905V
The contract pertains to the procurement of 50 springs with part number 650201-D and NSN 5360-01-137-4387, sourced from I-T-E IMPERIAL CORP located in Horsham, PA. The requirement is tied to purchase request 7014266889 and demands delivery within five days of award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Any government identification on non-accepted supplies must be removed per RQ011 requirements. The solicitation number is SPE7L1-26-T-905V, posted on August 2, 2026, with responses due by August 13, 2026. It falls under NAICS code 332613 and is managed by the Department of Defense's Land Supply Chain organization, with performance required at Bremerton, WA, 98314-5001. Primary point of contact is Derek Roberts, reachable via email and phone listed, and all submissions must be made through the DIBBS platform using the provided UI link.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7M4-26-T-296T
This contract is for the procurement of five helical compression springs identified by NSN 5360-01-187-9365 and part number 217326 from Eaton Corp, with a unit price of $5.00 per spring and a total contract value of $25.00. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, ensuring proper identification, labeling, and palletization as specified. The springs are to be delivered FOB origin in a single shipment, with no variance allowed in quantity, and are subject to inspection and acceptance at the destination. The delivery deadline is 173 days from the contract award, with an original required delivery date of February 3, 2027. The consignee is Arizona Industries for the Blind in Phoenix, AZ, and all shipping instructions must adhere to DLAD Proc Notes C19 and C20. The solicitation number is SPE7M4-26-T-296T, issued under a federal procurement with NAICS code 332613, and the point of contact is Rory O’Reilly of the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-905F
This contract pertains to the procurement of 15 helical compression springs with NSN 5360-01-109-4439 under solicitation SPE7L1-26-T-905F, issued by the Department of Defense through the Land Supply Chain. Delivery is required within five days of award, and all supplies must strictly comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The springs must be free of asbestos and any ozone-depleting chemicals, a prohibition that overrides any conflicting specification language but does not relieve the supplier of fulfilling all product performance requirements. Substitute materials or alternative components must be submitted for approval unless explicitly authorized by existing specifications. Packaging must adhere to DLA packaging standards, and all non-accepted supplies must have government identification removed prior to delivery. The solicitation opens on August 2, 2026, with responses due by August 13, 2026, and all inquiries should be directed to Kristina Derry at the provided DLA contact details.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-905W
This contract specifies the procurement of a single helical compression spring with NSN 5360-01-474-6290, requiring delivery within 20 days of award under solicitation SPE7L1-26-T-905W, with responses due by August 13, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item must comply with DLA packaging standards, prohibit use of Class I ozone-depleting chemicals and asbestos, and require approval of any substitute materials. Supplier documentation must adhere to DLA Directive Procurement Note C03 for supply chain traceability retention, and government identification must be removed from non-accepted supplies. Performance is set for Mechanicsburg, Pennsylvania, with primary point of contact Derek Roberts, and the procurement falls under NAICS code 332613 administered by the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-905J
This contract specifies the procurement of a helical compression spring with part number 40406-1 PC28 and NSN 5360014158728, supplied by TRAC REGULATOR CO INC, CAGE 55378, located in Mount Vernon, NY. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including prohibitions on ozone-depleting chemicals and intentional use of mercury or mercury-containing compounds, except in specifically exempted applications such as batteries, fluorescent lights, sensors, or naval-specified reagents. Mercury-containing portable devices must include shock-proof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. The contract mandates strict supply chain traceability documentation in line with DLAD Procurement Note C03, and all packaging must conform to MIL-STD-2073-1E and marking standards under MIL-STD-129 with no special markings required. Delivery is FOB destination within 20 days of contract award, with no variance permitted in quantity, and inspection and acceptance occur at the destination. The item is to be shipped via traceable means only, explicitly excluding parcel post, and is destined for USS HARPERS FERRY LSD 49 at FPO AP 96665. Transportation protocols follow DLA Procurement Notes C19 and C20, and the original required delivery date is June 15, 2026. The contract is governed under solicitation SPE7L1-26-T-905J, identified as a federal procurement under NAICS code 332613, managed by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 313310
New
DIBBS
Supplier of Specialty Materials (Non-Hazardous)The contract is a small business set-aside solicitation for the supply of durable fabrics, foams, fasteners, and other non-hazardous components required for seat cover manufacturing, all of which must meet stringent technical and environmental standards established by the Defense Logistics Agency. Materials must comply with federal regulations and be suitable for defense-grade applications, ensuring durability, safety, and long-term performance under demanding conditions. The procurement is structured as a subcontract under the Small Business Administration’s Total Small Business Set-Aside program, exclusively available to businesses certified as small under NAICS code 313310, which covers textile mill products manufacturing. The solicitation was posted on August 2, 2026, with responses due by August 17, 2026, and is managed by the Land Supply Chain branch of the Department of Defense. While specific delivery locations and contracting office details are not provided, performance is expected to support defense-related seat cover production across multiple operational environments. All suppliers must demonstrate full compliance with environmental and material specifications, as non-conforming goods will be rejected. Interested parties must submit proposals through the official DIBBS portal, and selection will prioritize small businesses capable of delivering high-quality, standards-compliant components on schedule.
Textile and Fabric Finishing Mills

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171)The contract requires the implementation and assessment of NIST SP 800-171 cybersecurity controls to safeguard covered defense information, ensuring compliance with federal requirements for protecting sensitive data across the defense supply chain. This includes full adherence to all specified security controls, ongoing monitoring, documentation of control effectiveness, and submission of System for Award Management SPRS scores to demonstrate compliance status. The contractor must also establish and maintain a robust cyber incident response capability, including timely detection, reporting, and remediation of any cybersecurity events impacting covered defense information. This is a total small business set-aside subcontract under NAICS code 541512, assigned by the Department of Defense’s Land Supply Chain organization, and is intended exclusively for small businesses as defined by the SBA. The solicitation was posted on August 2, 2026, with a response deadline of August 17, 2026. Performance is expected to support federal defense information systems, with no specific location designated for place of performance. All work must align with NIST standards and the broader cybersecurity expectations of the Department of Defense, and failure to meet compliance requirements may result in contract termination or penalties.
Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract pertains to regulatory compliance for hazardous materials used in production, requiring full adherence to OSHA’s Hazard Communication Standard under 29 CFR 1910.1200. This includes accurate labeling of hazardous chemicals in accordance with HCS guidelines, generation of up-to-date Safety Data Sheets for all regulated substances, and timely submission of exemption reports as mandated by federal regulations. The work involves ensuring that all documentation and labeling practices meet the latest federal standards to support safe handling, storage, and usage of hazardous materials within the production environment. This is a small business set-aside subcontract under NAICS code 541620, issued by the Department of Defense through the LAND SUPPLY CHAIN agency. The solicitation was posted on August 2, 2026, with a response deadline of August 17, 2026. The contract is exclusively available to small businesses as defined by the SBA, and performance is expected to support defense production activities under the jurisdiction of the Department of Defense. All deliverables must align with federal occupational safety regulations and must be completed within the specified timeframe to maintain compliance across the supply chain.
Environmental Consulting Services

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Palletization ServicesThe contract calls for comprehensive packaging and palletization services to support Department of Defense logistics operations, specifically requiring government-compliant methods including unit wrapping, proper palletization, and adherence to MIL-STD-129 labeling standards with barcodes for all shipments to the Defense Logistics Agency. All work must meet stringent military packaging requirements to ensure durability, traceability, and seamless integration into the DLA supply chain. The solicitation is exclusively set aside for small businesses under the SBA’s Total Small Business Set-Aside program, classified under NAICS code 493190, indicating a focus on warehousing and storage services. Proposals must be submitted by the response deadline of August 17, 2026, and performance is expected to align with federal defense logistics protocols, though the specific place of performance is not detailed in the provided information.
Other Warehousing and Storage

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 315990
New
DIBBS
Manufacturing of Vehicular Seat CoversThe contract entails the full production of approximately 60 vehicular seat covers identified by NSN 2540-01-578-0812, covering all manufacturing stages including cutting, sewing, and rigorous quality control to meet military-grade durability and material specifications. The work must comply with all applicable Department of Defense standards, ensuring the final products are fit for military use under demanding operational conditions. This is a Small Business Set-Aside subcontract under NAICS code 315990, restricted exclusively to small businesses as defined by the SBA, and was posted on August 2, 2026, with a response deadline of August 17, 2026. The solicitation is managed by the Land Supply Chain under the Department of Defense, and while specific performance location and point of contact details are not provided, the contract is accessible through the DIBBS system via the given UI link.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE7L1-26-T-905A
The contract pertains to the procurement of two straight-headed pins with NSN 5315-01-648-4914 under solicitation SPE7L1-26-T-905A, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within five days of award, with performance located in Barstow, California, 92311-5015. The item is subject to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the contract incorporates mandatory compliance with export control regulations under ITAR or EAR, prohibiting unauthorized disclosure or export of technical data to foreign persons anywhere in the world. Contractors must hold an approved US/Canada Joint Certification Program certification, complete DLA-mandated training on handling export-controlled data, and pass the DLA Export-Controlled Technical Data Questionnaire to access such information. The solicitation requires CMMC Level 2 certification for any third-party assessment organization involved, and all responses must be submitted by August 13, 2026. Point of contact is Kristina Derry, with the solicitation available via the DIBBS portal and governed by DFARS 252.225-7048 for export controls.
Other Fabricated Wire Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-904V
The contract pertains to a single gasket item identified by NSN 5330-01-165-1362 with a quantity of one unit, subject to delivery within five days of award. All supplies must be free of asbestos, and any substitutions must comply with Clause L30 and Provision 4 conditions. The item must be marked in accordance with MIL-STD-130N dated November 16, 2012, for identification of U.S. military property, and government identification must be removed from any non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Covered Defense Information may apply, and packaging must meet DLA procurement standards. The solicitation number is SPE7L1-26-T-904V, issued on August 2, 2026, with responses due by August 13, 2026. The place of performance is Beaufort, South Carolina, 29904-6120, and the contract is managed by the Department of Defense’s Land Supply Chain under NAICS code 339991. Primary point of contact is Kristina Derry, reachable via email and phone provided.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333618
New
DIBBS
AIR CLEANER, INTAKE
Solicitation # SPE7L1-26-T-904M
The contract is for the procurement of six air cleaner intake units with part number 981-1.5-08-V-44-50-V and NSN 2940017247554, issued under solicitation SPE7L1-26-T-904M by the Department of Defense’s Land Supply Chain. Delivery is required within 133 days from contract award, with FOB origin terms and no quantity variance allowed. The items must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and unit containment, with no special marking required. Palletization must adhere to DLA Packaging Requirements, and all items must be free of Class I ozone-depleting chemicals, overriding any conflicting specification requirements unless substitute chemicals are pre-approved. The contract is a total small business set-aside under NAICS code 333618, with a unit price of $6.00 per unit and a total contract value of $36.00. The required delivery date is December 25, 2026, and all transportation logistics must follow DLA Procurement Notes C19 and C20.
Other Engine Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
LATCH SET, RIM
Solicitation # SPE7L1-26-T-902K
The contract is for the supply of a LATCH SET, RIM with NSN 5340-01-695-7631 and part number E3-129-025, totaling eight units to be delivered within five days of award under solicitation SPE7L1-26-T-902K. Delivery is FOB destination with no quantity variance permitted, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must conform to MIL-STD-129, with no special marking required. The product must be shipped in accordance with DLA packaging requirements and palletization standards. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components such as batteries, fluorescent lamps, or instrument sensors, in which case they must be shockproof with a secondary containment boundary as per NAVSEA 5100-003D. The contract incorporates technical and quality requirements from the DLA Master List, and all specifications are governed by the revision in effect at the solicitation or award date depending on acquisition size. The delivery address is a U.S. military postal facility in FPO AP 96306-0001, while the shipping origin is a Japanese military supply location. The unit price is $8.00, resulting in a total contract value of $64.00. The required delivery date is July 30, 2026, and government use identifiers, including IPD, DIC, and FC codes, are provided for internal tracking. The official point of contact is Michael Nordahl, reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC RO
Solicitation # SPE7L1-26-U-0535
The contract solicitation SPE7L1-26-U-0535 seeks the procurement of nonmetallic round section seals under an indefinite-delivery contract (IDC) with a guaranteed minimum and a maximum value of $350,000. The quantity of 426 units is estimated and not guaranteed; actual purchases depend on individual delivery orders issued under the contract. The item, identified by NSN 5330-01-466-8565, must be delivered FOB origin within 97 days and is subject to strict packaging, preservation, and marking requirements in accordance with MIL-STD-2073-1E, MIL-DTL-117 Type II Class C Style 1, and MIL-STD-129. Packaging for UV-sensitive materials must be medium duty, waterproof, greaseproof, and opaque to prevent degradation, and all shipments must be palletized per DLA’s RP001 standards. Asbestos is strictly prohibited, and mercury or mercury-containing compounds are banned from direct contact with the hardware unless exempted for specific functions such as batteries, fluorescent lamps, sensors, or instruments, in which case a second containment boundary meeting NAVSEA 5100-003D is mandatory. Hazardous materials must be labeled and shipped according to IP025 and 29 CFR 1910.1200, with Safety Data Sheets required. All deliverables are subject to destination inspection and acceptance by the government, with payment processed exclusively through WAWF. The contract incorporates numerous FAR and DFARS clauses addressing cybersecurity, including NIST SP 800-171 compliance, safeguarding of covered defense information, cyber incident reporting, and prohibitions on telecommunications equipment from designated foreign entities. It also includes requirements to prevent trafficking in persons, ensure employment eligibility verification, promote sustainable products, and prohibit hexavalent chromium and toxic material disposal. The solicitation is set aside exclusively for Women-Owned Small Businesses, and offerors must provide accurate UEI and CAGE codes, represent their socioeconomic status, and disclose any joint venture arrangements. Transportation must use U.S.-flag vessels unless a waiver is granted, and all shipments require proper documentation including vessel identification. No contract award has been made, and the solicitation closes on August 17, 2026, with proposals submitted via DLA’s electronic systems and addressed to the specified Columbus, Ohio postal address.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-905P
The contract pertains to the procurement of O-RINGS with NSN 5331-01-652-8142, requiring delivery of 74 units under solicitation SPE7L1-26-T-905P. The item is classified as a Type I shelf-life item with a non-extendable 60-month shelf life, subject to strict traceability and packaging requirements under DLA directives including DLAD Procurement Note C03 for supply chain documentation retention and MIL-DTL-117 Type II Class C Style 1 for opaque, waterproof, greaseproof packaging to protect against UV degradation. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special code 32 indicating Type I shelf life, and palletization must follow DLA Packaging Requirements for Procurement. Delivery is FOB origin with no quantity variance, inspection and acceptance occur at destination, and shipment must be completed within 103 days by November 25, 2026. The item is designated as non-surplus acceptable, and all technical and quality standards referenced, including those identified by R and I numbers, are governed by the DLA Master List. Transportation logistics adhere to DLAD Procurement Notes C19 and C20, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is governed by DoD unit of issue standards and incorporates applicable defense information handling requirements under RD003.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details