Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SPRING, HELICAL, COMPRES

Active
SPE7M4-26-T-291GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of 20 helical compression springs with the NSN 5360-01-392-0755 from Vickers Inc, Sterer Engineering & Manufacturing Division in Los Angeles, CA. The technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA standards, and the use of Class I ozone-depleting chemicals is strictly prohibited in manufacturing or incorporation, overriding any conflicting specification requirements unless the substitute chemicals are explicitly authorized or approved. The contract was issued under solicitation number SPE7M4-26-T-291G with a response deadline of August 10, 2026, and a posted date of July 29, 2026. The delivery schedule requires completion within 147 days after award, with performance location designated as Hill AFB, Utah, 84056-5734. The purchasing agency is the Department of Defense’s Fluid Handling Division, and the primary point of contact is Rory O’Reilly, reachable via email and phone provided. This solicitation falls under NAICS code 332613 and is classified as a federal procurement activity.

General Info

Procure 20 helical compression springs to Hill AFB by 147 days post-award, per DLA standards, no ozone-depleting chemicals.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332613 - Spring ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Rory O'Reilly
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING,HELICAL,COMPRESSION
SPRING<(>,<)> HELICAL<(>,<)> COMP
VICKERS INC, STERER ENG & MFG DIV LOS ANGELES CA
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
NO DATA IS AVAILABLE FOR USE IN NSN/Part Number: 5360-01-392-0755 Quantity: 20 EA Purchase Request: 7017440078QTY: 20 Delivery: 147 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-888T
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-890L
The contract specifies the procurement of a helical compression spring with NSN 5360-00-903-1594 and part number HP848107 from TACTAIR FLUID CONTROLS INC, requiring a quantity of 351 units delivered FOB origin within 291 days of contract award, with no tolerance for quantity variance. All supplies must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, packaging materials, and unit containerization, and must be marked in accordance with MIL-STD-129 without special marking codes. The items are destined for Arizona Industries for the Blind in Phoenix, AZ, with the same address used for both freight shipping and parcel post delivery. The contract mandates adherence to DLA packaging and quality requirements, incorporating technical and quality specifications referenced from the DLA Master List, with revisions controlled by the solicitation issue date. Inspection and acceptance occur at the destination point, and transportation logistics are governed by DLAD procedural notes C19 and C20. The solicitation number is SPE7L1-26-T-890L, issued on July 29, 2026, with responses due by August 10, 2026, under NAICS code 332613, and the primary point of contact is Derek Roberts of the Department of Defense, Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
Precision Spring ManufacturingThe contract requires the manufacture of a helical compression spring compliant with military specifications for NSN 5360-01-199-2106, encompassing strict adherence to material standards, dimensional tolerances, and load testing protocols to ensure performance under demanding operational conditions. The supplier must deliver products that meet all technical requirements without deviation, with quality control processes verified through documented testing procedures to confirm conformance to the established military criteria. The solicitation is issued as a subcontract under the NAICS code 332613 for precision spring manufacturing, with a response deadline of August 10, 2026, and a posted date of July 28, 2026. The place of performance is designated as FPO with ZIP code 96632, indicating delivery to a military post office location, typically supporting overseas or expeditionary operations. The procuring agency is the Department of Defense through the Land Supply Chain organization, indicating this component is critical to land-based military systems requiring reliable, high-precision spring mechanisms.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
Precision Machining and Metal FabricationThe contract requires the manufacture of the 'INSERTER AND REMOVE' component, part number A10002-7, to exact military specifications involving precision machining, metal forming, and assembly processes. All work must comply with defense-grade quality standards, ensuring the component’s structural integrity and performance under demanding operational conditions. The production involves the handling and fabrication of metal parts with tight tolerances, and the finished product must meet stringent military requirements for reliability and longevity. This is a subcontract opportunity under the NAICS code 332613, posted by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The solicitation is open with a response deadline of August 5, 2026, and the work is to be performed at a designated location in New Cumberland, Pennsylvania, with the zip code 17070-5002. The contract is part of a broader defense supply chain effort, and interested parties must submit their proposals through the designated DIBBS portal before the deadline to be considered for award.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332613
New
DIBBS
Helical Compression Spring ManufacturingThe contract requires the manufacture and delivery of four helical compression springs meeting exact military specifications, with strict adherence to MIL-STD-130N marking standards for identification and traceability. The work is designated as a subcontract under NAICS code 332613 and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization, with performance required in Greensboro, North Carolina, at the zip code 27409. The solicitation was posted on July 28, 2026, and responses are due by July 31, 2026, indicating a narrow window for submission. Although no specific set-aside classification is listed, the project is tied to defense procurement and demands full compliance with federal military standards for both component production and labeling.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332613
New
DIBBS
Precision Spring Manufacturing (Helical Compression Spring)The contract requires the manufacture and delivery of a helical compression spring identified by NSN 5360-01-036-7109, fully compliant with military specifications governing precise dimensions, material grade, load performance metrics, and packaging standards. The spring must meet rigorous engineering and quality benchmarks to ensure reliability under operational conditions, with all production processes aligned to meet defense-grade requirements. Compliance is mandatory across every phase, from raw material sourcing to final inspection and shipment, with documentation to verify adherence to technical and regulatory criteria. This is a subcontract under the Department of Defense, managed by LAND SUPPLIER OPNS VEHICLE SPT, with a response deadline of August 10, 2026, and a posting date of July 28, 2026. The NAICS code 332613 indicates the work falls under spring manufacturing, and the place of performance is designated as FPO with ZIP code 34091. All deliverables must be prepared and shipped to meet military logistics protocols, and the subcontractor is expected to demonstrate proven capability in producing high-integrity components for defense applications without deviation from the specified technical parameters.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
Precision Machined Piston Ring SupplyThe contract pertains to the manufacture and supply of a precision-engineered piston ring identified by NSN 3040-01-665-5745 and part number 12052506-01, designed to meet stringent military specifications and Defense Logistics Agency technical standards for form, fit, and function in critical defense systems. The component is intended for use in high-performance applications where reliability and exacting tolerances are essential, and the supplier must ensure full compliance with all applicable defense manufacturing requirements. Production and delivery must align with DLA’s quality assurance protocols to guarantee operational readiness and interchangeability across military platforms. This is a subcontract opportunity posted by the Land Supply Chain under the Department of Defense, with a response deadline of August 10, 2026, and a place of performance specified as Groton, Connecticut, ZIP 06340-4905. The NAICS code 332613 indicates the work falls under the category of Machine Shops; Turned Product; and Screw, Nut, and Bolt Manufacturing. The solicitation is accessible via the DIBBS portal, and interested parties are expected to submit proposals meeting technical, logistical, and compliance criteria by the stated deadline. No set-aside designation is indicated, meaning the opportunity is open to all qualified contractors.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
Helical Compression Spring SupplyThe contract obligates the supplier to manufacture and deliver one helical compression spring identified by NSN 5360-01-665-5836, fully compliant with Defense Logistics Agency standards. The spring must be packaged in accordance with MIL-STD-129 requirements and delivered to Groton, CT no later than 20 days after contract award. The item falls under NAICS code 332613, indicating classification within the spring manufacturing industry, and is issued as a subcontract under the Department of Defense’s Land Supply Chain. The opportunity was posted on July 28, 2026, with responses due by August 10, 2026, and performance is strictly bound to the specified delivery location and timeline.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
Helical Compression Spring Manufacturing and DeliveryThe contract requires the manufacture and delivery of a single helical compression spring identified by NSN 5360-01-198-8082 and part number 670184552, with strict adherence to military standards including MIL-STD-2073-1E for packaging, MIL-STD-129 for labeling, and NAVSEA 5100-003D for naval engineering specifications. The spring must be delivered FOB destination to the USS THEODORE ROOSEVELT (CVN 71), ensuring it arrives at the designated naval vessel in compliance with all technical and logistical requirements. The work falls under NAICS code 332613, indicating classification as a spring manufacturing subcontract, and the performance location is listed as FPO with ZIP code 96632, reflecting a military postal address typically used for ship-based deliveries. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, indicating a competitive procurement window of approximately two weeks. The contract is categorized as a subcontract under the Department of Defense, managed by the LAND SUPPLY CHAIN organization, and is accessible via a public DIBBS portal link. While specific point of contact details are not provided, the delivery protocol and regulatory compliance requirements imply rigorous quality control and documentation processes must be followed. The FOB destination term places transportation risk and cost responsibility on the supplier until the item is received aboard the USS THEODORE ROOSEVELT, underscoring the importance of timely, compliant delivery to a sensitive military operational platform.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-886L
The contract is for a single helical compression spring with NSN 5360-01-665-5836, under solicitation SPE7L1-26-T-886L, with a required delivery within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the specific revision in effect determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and all supplies must be free of Government identification if not accepted. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval unless explicitly allowed by specification. Mercury and mercury-containing compounds are banned from intentional addition or direct contact with supplied hardware except for approved functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents. Portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment barrier per NAVSEA 5100-003D. Technical data associated with this item is subject to ITAR or EAR export controls, and disclosure to foreign persons—even within the United States—is prohibited without authorization. Only DLA contractors holding a valid US/Canada Joint Certification Program certification, who have completed mandatory DLA training and questionnaire, are permitted to access controlled technical data. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and the place of performance is in Groton, Connecticut, under the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING
Solicitation # SPE7L1-26-T-883G
The contract pertains to the procurement of a spring identified by NSN 5360-01-155-1731, with a quantity of one unit, under solicitation number SPE7L1-26-T-883G. The supplier must comply with all DLA packaging and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Strict restrictions apply regarding mercury and mercury-containing compounds: they must not be intentionally added or come into direct contact with the supplied hardware, except for specific functional uses such as batteries, fluorescent lights, certain instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment barrier as mandated by NAVSEA 5100-003D. The item must be marked in accordance with MIL-STD-130N for U.S. military property identification. Delivery is required within 20 days after contract award, and the place of performance is designated as FPO 09573. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, and the primary point of contact is Kristina Derry of the Department of Defense's Land Supply Chain, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-884P
The contract is for a single helical compression spring with NSN/Part Number 5360-01-199-2106, issued under solicitation SPE7L1-26-T-884P, with a response deadline of August 10, 2026, and a required delivery within 20 days of award. The item is classified under NAICS code 332613 and falls under the Department of Defense’s Land Supply Chain, with performance to occur at FPO, 96632. The contract incorporates all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the spring or any associated hardware, except for specific exemptions such as functional mercury in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents approved by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier, as mandated by NAVSEA 5100-003D. All government identification must be removed from non-accepted supplies, and the primary point of contact is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 326220
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-290Y
This contract specifies the procurement of an air duct hose designated by NSN 4720016448140, with a single unit required and a delivery timeline of 140 days FOB destination. The item is classified as a critical application item and must comply with MIL-PRF-32107/12, Revision D dated 05/31/2022, along with referenced quality assurance provisions including QAP 16236 and MIL-PRF-32107 Supplement 1. Shelf life is strictly defined at 60 months with no extension permitted, and the item is labeled as Type I under shelf-life code S. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 marking standards, with palletization following DLA packaging requirements. The hose must be free of ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for specific exempted uses such as in batteries, fluorescent lights, or instrument controls specified by NAVSEA, which must include secondary containment if portable. Inspection and acceptance occur at origin, and the contractor must perform first article testing as required under FAR 52.209-3, with a separate line item designated for this purpose, though no separate charge is assumed unless explicitly quoted. Delivery is directed to USS GERALD R FORD CVN 78 at FPO AE 09523 via fastest traceable means, with parcel post explicitly prohibited. All technical and quality requirements are governed by the DLA Master List referenced in the document, and any substitution of materials requires prior approval. The contract prohibits any use of government identification on rejected items and applies to full and open competition with no set-aside.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 313320
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-290Z
This contract pertains to the procurement of a single nonmetallic hose assembly, sized at 6 inches and 20 inches in length, manufactured to meet the military specification for high-temperature, medium-pressure tetrafluoroethylene hose used in UH-60 helicopter applications. The item is identified by NSN 4720-00-147-1696 and is listed on the Qualified Products List, requiring compliance with approved manufacturers and technical standards including MIL-DTL-25579H, MS8006D, and MIL-STD-130N for marking and configuration control. The hose must not contain any Class I ozone-depleting chemicals, and any substitution of materials must be pre-approved. Technical and quality requirements referenced from the DLA Master List supersede all other specifications, and packaging must adhere to ASTM D3951 while aligning with MIL-STD-129 labeling and DLA-specific packaging directives, including palletization per RP001. The item is designated as a critical application component with strict compliance requirements. Delivery is required within ten days of contract award, FOB origin, with zero percent variance allowed in quantity, and inspection and acceptance occur at the destination. The sole unit is to be delivered to the U.S. Army SSA Bulgaria facility at Novo Selo Training Area, Building 7000, Mokren 8994, Bulgaria, under Shipment RDD 555, following DLA Transport Procedure Notes C19 and C20. Marking must include the contract number SPE7M4-26-T-290Z, procurement request 7017659456, and government identifier WK4GDV62090174. The solicitation was issued on July 29, 2026, with responses due by August 10, 2026, and the original required delivery date is July 31, 2026. The contract is under the Department of Defense, Fluid Handling Division, and all deliverables must conform to DLA’s authorized unit of issue and procurement protocols.
Fabric Coating Mills

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-290X
The contract is for one unit of a hose and air duct, identified by NSN 4720-01-644-8032, under solicitation SPE7M4-26-T-290X, with a required delivery within 20 days of award and delivery FOB destination. The product must comply with technical specifications outlined in MIL-PRF-32107/3 and MIL-PRF-32107 Sup 1, as defined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards. Packaging must adhere to ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization following DLA Packaging Requirements for Procurement. The item is subject to full and open competition, with zero tolerance for quantity variance, and inspection and acceptance occur at the final destination. The delivery address is USS GERALD R FORD CVN 78, FPO AE 09523, with shipment required via fastest traceable means, excluding parcel post, and transportation logistics governed by DLAD PROC NOTES C19 and C20. The required delivery date is July 27, 2026, and the contract includes government-only fields for internal tracking and disposition. The point of contact for the solicitation is Blake Tushar of the Department of Defense’s Fluid Handling Division.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-291M
Offerors must comply with strict requirements regarding telecommunications equipment and domestic sourcing, including adherence to the Berry Amendment, Buy American Act, and DFARS clauses that restrict foreign-sourced materials, with a reduced threshold of $150,000 requiring full disclosure for non-domestic content. Submission of quantity ranges is strongly encouraged due to fluctuating demands, allowing buyers to consolidate or adjust orders without re-solicitation, though this does not apply to Auto IDC. All offerors must represent they will not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit certifications for eligibility under specific small business categories as outlined in FAR provisions. Access to the Vendor Shipment Module is transitioning to require registration via the Account Management & Provisioning System, with mandatory schema updates for WebServices users to maintain shipping capabilities. Additive manufacturing is prohibited unless specifically approved by the contracting officer, and any offer including AM-produced items will be deemed ineligible. Offerors unable to quote by the closing date must submit a “No Bid” on DIBBS with an anticipated quote date or explanation to avoid assumption of non-responsiveness. The solicitation is for 309 O-rings under NSN 5331-00-800-8390, with a delivery requirement of 256 days ADO, and responses are due by August 10, 2026. APEX Accelerators offer free support for businesses seeking to enter government contracting.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-291B
The contract specifies the procurement of a non-metric hose assembly with NSN 4720-01-571-5016 and part number 040505-601, quantity of two units, under solicitation SPE7M4-26-T-291B. Delivery is required within 161 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, and palletization must follow DLA Packaging Requirements for Procurement (RP001), with all technical and quality specifications governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and must adhere to requirements for handling covered defense information. The unit price is $2.00 per unit, with no variance allowed in quantity. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027, and original delivery due by January 26, 2027. Transportation details are governed by DLAD Proc Notes C19 and C20. The contract is issued under the Department of Defense’s Fluid Handling Division, with Blake Tushar listed as the primary point of contact, and falls under NAICS code 326220 for rubber product manufacturing.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
RING, COMPRESSOR
Solicitation # SPE7M4-26-T-291L
The contract pertains to the procurement of six compressor rings with NSN 4310-01-061-1286 and part number 8234B, supplied by Curtiss-Wright Electro-Mechanical Corp and Dresser-Rand Co, under solicitation SPE7M4-26-T-291L. The item is designated as a critical application component and must comply with stringent DLA packaging and technical requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific permitted uses such as batteries, lighting, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary as specified in NAVSEA 5100-003D. The items must be delivered FOB origin within 57 days of contract award, with a required delivery date of August 4, 2026, and a zero tolerance for quantity variance. All deliveries must be addressed to the DLA Distribution facility in New Cumberland, Pennsylvania, following designated transportation protocols outlined in DLAD Proc Notes C19 and C20. The unit of issue is each, with a unit price of $6.00, resulting in a total contract value of $36.00, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessible via the DLA website, with revisions as of the solicitation issue date controlling unless amended.
Air and Gas Compressor Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-291K
The contract specifies the procurement of 78 nonmetallic hose assemblies with NSN 4720014997648 and part number 20-02418, delivered in two equal lots of 39 units each at a unit price of $39.00, totaling $3,042. Delivery is required within 84 days from the contract award, with FOB origin terms, zero quantity variance allowed, and inspection and acceptance occurring at the destination. All items must be packaged in compliance with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements supersede any conflicting ASTM standards. Packaging and labeling must adhere strictly to MIL-STD-129, with palletization governed by DLA’s RP001 packaging requirements and each unit pack containing exactly one unit. Two delivery destinations are specified: one to the New Cumberland, Pennsylvania facility and another to the Barstow, California facility, each with designated shipping and receiving addresses, contact information, and transport procedures outlined in DLAD Proc Notes C19 and C20. The original required delivery date is January 12, 2025, with a need ship date of December 18, 2024. The contract is issued under solicitation SPE7M4-26-T-291K by the Department of Defense’s Fluid Handling Division, and the unit of issue is the individual unit as defined by DoD standards.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-291P
This contract is for a nonmetallic hose assembly designated as a critical application item with a shelf life of 180 months, which is non-extendable, and strictly prohibits the use of class I ozone-depleting chemicals in manufacturing or incorporation. The item is governed by technical and quality requirements referenced from the DLA Master List, with compliance controlled by the revision in effect on the solicitation or award date depending on acquisition size. It must conform to specific technical data packages aligned with reference drawings C01A10180, C01V10158, C01V10159, and C01V10282, all at designated revisions. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129 with no special marking required, and palletization must meet DLA packaging standards. The item is to be delivered FOB origin in a quantity of 14 units, each with a unit price of $14.00, for a total price of $196.00, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, with delivery required within 100 days and a necessary ship date of November 19, 2026. The item is identified by NSN 4720-01-733-0768 and is procured under contract SPE7M4-26-T-291P with full and open competition, and the delivery destination is the DLA Distribution San Joaquin warehouse in Tracy, California.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-291N
This contract is for the procurement of 11 metal tube assemblies under solicitation SPE7M4-26-T-291N, with a delivery requirement of 120 days and FOB origin terms. The contract mandates strict adherence to Defense Logistics Agency technical and quality requirements referenced from the DLA Master List, with all components subject to Qualified Products Lists or Qualified Manufacturers Lists as applicable. First article testing is required for three units, but the approved first article cannot be shipped as a new part, and the number of units specified for testing is definitive. The product must not contain any ozone-depleting chemicals, and any substitute chemicals require prior approval. All packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA packaging guidelines, and the DLA Master List takes precedence over ASTM standards. Inspection and acceptance occur at the origin, with zero non-conformances required in sampling under MIL-STD-1916 or comparable zero-based plans, assigning verification levels based on attribute criticality. The contract is a total small business set-aside under NAICS code 331210, and offerors must certify compliance with all QPL/QML requirements, submitting only approved components. One line item specifies the supply of 10 units at a unit price of $11.00, while a separate line item for one unit is designated solely for the first article test, priced at $1.00, with no separate charge assumed if not quoted. The first article test requirement is governed by FAR clause 52.209-3, and if waived, no payment shall be made for that line. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with no quantity variance permitted. The contract prohibits the use of government identification on rejected supplies and requires tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. All documentation, including assembly drawings, reference specifications dated October 2, 2019, and the original revision dated November 25, 2009, must be strictly followed. The contract does not allow for the use of non-compliant materials or methods, and full and open competition was conducted under a small business set-aside. The point of contact for inquiries is Lorenzo Rankins at the Department of Defense’s Fluid Handling Division.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-290U
The contract is for one unit of a metal tube assembly used as a fuel injector, identified by NSN 4710-00-227-8310 and part number 35356724 from Perkins Engines Co Ltd. The delivery is required within 20 days from the contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must fully comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, cushioning, and container use. Marking must conform to MIL-STD-129 with no special markings required. The item is destined for W81B9W at Schofield Barracks, Hawaii, with transport governed by DLAD procedures C19 and C20. All technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with the revision effective on the solicitation issue date controlling compliance. The solicitation number is SPE7M4-26-T-290U, issued by the Fluid Handling Division of the Department of Defense, with a response deadline of August 10, 2026, and a posted date of July 29, 2026. The assigned NAICS code is 332996, and the required delivery date is July 27, 2026. The primary point of contact is Rory O'Reilly, reachable via phone and email provided, and the contract is administered under the DIBBS platform. Government use fields indicate internal tracking identifiers, and the unit of issue is a single unit (EA). The contract is part of Project TP3, with the supplier address linked to the designated military receiving point and no set-aside status applied.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332312
New
DIBBS
EXPANSION JOINT, PIPE
Solicitation # SPE7M3-26-T-7742
The contract is for the procurement of twelve expansion joints for pipe systems, identified by NSN 4730-01-454-0089, under solicitation SPE7M3-26-T-7742, with a total set-aside for small businesses as defined by the SBA. The technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, with compliance dependent on the revision in effect at the solicitation issue date or award date, depending on the acquisition size. The item is subject to export control under either ITAR or EAR, strictly limiting the handling and dissemination of associated technical data to authorized U.S. contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been expressly approved by DLA to access controlled data. Any disclosure, including to foreign nationals within the United States, constitutes an export requiring prior government authorization. Delivery is required within 142 days after contract award, with performance located in San Diego, California. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and the contracting office is the Fluid Handling Division of the Department of Defense, with William Cain designated as the primary point of contact.
Fabricated Structural Metal Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE7M4-26-T-291H
The contract is for one seat valve, identified by NSN 4820-01-029-2783 and part number 6016038-003, to be supplied under solicitation SPE7M4-26-T-291H with a delivery requirement of 182 days from the contract award date, set for delivery FOB origin. The item is classified as a critical application component and must comply with stringent DLA packaging and quality standards, including MIL-STD-2073-1E packaging and MIL-STD-129 marking, with no exceptions to the quantity variance of plus or minus zero percent. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with no special marking required beyond standard requirements. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional uses in specified instruments, batteries, or weapon systems as defined by NAVSEA, and requires secondary containment for any portable devices containing mercury in compliance with NAVSEA 5100-003D. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced at the DLA website, with revisions controlled by the solicitation issue date. The contract includes transportation directives under DLAD Proc Note C19 and C20, with the supplier required to meet the need ship date of February 3, 2026, and original required delivery date of November 4, 2026. The point of contact for inquiries is Freddie Vazquez of the DLA Fluid Handling Division.
Industrial Valve Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details