Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SPRING, HELICAL, COMPRES

Active
SPE7L1-26-T-814NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 38 helical compression springs identified by NSN 5360-01-247-9620, with a delivery requirement within 168 days after award. The solicitation number is SPE7L1-26-T-814N, issued by the Department of Defense through the Land Supply Chain under the NAICS code 331318, and responses are due by July 20, 2026. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Compliance with MIL-STD-130N for identification marking of U.S. military property is required, and the supplier must ensure no intentional addition of mercury or mercury-containing compounds to any supplied hardware, except for specific exempted applications such as batteries, fluorescent lights, sensors, weapon systems, or reagents specified by NAVSEA. Mercury-containing portable lamps and instruments must be shock-proof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. The contracting office is located in Phoenix, Arizona, with Kelly Day as the primary point of contact for inquiries.

General Info

Procurement of 38 helical compression springs via DLA for U.S. federal use, response due July 20, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

331318 - Other Aluminum Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

515 N 51ST AVENUE NUMBER 130 DOCK 2, PHOENIX, AZ, 85043, US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-814N.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kelly Day
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING,HELICAL,COMPRESSION
SPRING, HELICAL, COMPRESSION
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
J G B ENTERPRISES INC
LIVERPOOL, NY
IDENTIFY TO
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). ADEQUATE DATA FOR NSN/Part Number: 5360-01-247-9620 Quantity: 38 EA Purchase Request: 7017440972QTY: 38 Delivery: 168 days ADO

Similar Contracts

NAICS: 331318
New
DIBBS
WIRE, ELECTRICALThe contract solicitation is for 1,500 feet of electrical wire, specified as a single continuous length on a 500-foot spool, with the NSN part number 6145-00-689-7447. The purchase request number is 7017439764, and delivery must be completed within 168 days after order. Full and open competition is authorized, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with compliance determined by the revision in effect on the solicitation issue date or award date depending on acquisition size. Government identification must be removed from all non-accepted supplies in accordance with RQ011. The solicitation number is SPE7M1-26-T-203N, issued on July 9, 2026, with responses due by July 20, 2026. The acquiring agency is the Department of Defense through the Maritime Supply Chain, with performance required in Jacksonville, Florida, 32212-0103. Primary point of contact is Alisha Blanton, reachable via email or phone as listed, and the solicitation is accessible through the DIBBS portal. The NAICS code is 331318, confirming the classification under wiring and wiring device manufacturing.
MARITIME SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 331318
New
DIBBS
SPRING, HELICAL, COMPRESThis contract specifies the procurement of 10 helical compression springs identified by NSN 5360-00-137-8205 and part number 101A751EYP1, manufactured to meet the current revision of ASTM A228/A228M and SAE AMS-QQ-N-290D standards, with past revisions still acceptable for previously produced items. The springs must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and all hardware furnished must adhere to the current standard as of the solicitation date. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking except for specified functional uses in batteries, instruments, or weapon systems under strict containment requirements per NAVSEA 5100-003D. The contract mandates packaging and marking in full compliance with MIL-STD-2073-1E and MIL-STD-129, using preservation method 10 and unit container A1, with no special marking required. Palletization follows DLA packaging guidelines, and delivery is FOB origin with a strict 100% quantity variance allowance. The delivery deadline is 168 days from contract award, with the required ship date set for January 5, 2027. Inspection and acceptance occur at the destination, and the item is to be delivered to Industries of the Blind Inc in Greensboro, NC. The solicitation was issued under DLA’s full and open competition policy with no set-aside, and all data aligns with DoD unit of issue standards. The primary point of contact is Kelly Day of the Department of Defense’s Land Supply Chain, and the contract is governed by DLA procedural notes C19 and C20 regarding transportation logistics.
LAND SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICALThis contract specifies the procurement of 3,000 feet of electrical wire in continuous length, identified by NSN 6145-00-914-9010 and part number A-A-59609, with a required revision level aligned to CID A-A-59609. The wire must be supplied in 1,000-foot reels with no multiple unit packs allowed if the advice code is 2N, 28, or 34; if the code is 2P or 39, multiple unit packs are acceptable, with the advice code superseding any conflicting schedule instructions. Strict prohibitions against intentional addition or direct contact of mercury or mercury-containing compounds apply, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents by NAVSEA, with portable fluorescent lamps and instruments requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and MIL-DTL-12000 for preservation, with marking per MIL-STD-129 and palletization per DLA packaging requirements. Delivery is FOB origin, with a 92-day delivery window and a 5% quantity tolerance; inspection and acceptance occur at destination. The contract requires full and open competition and references the DLA Master List of Technical and Quality Requirements for compliance. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of October 21, 2026, and original delivery due by December 30, 2026. Point of contact is Alisha Blanton at DLA, with solicitation issued under SPE7M1-26-T-192T, response deadline July 20, 2026, and posted July 9, 2026.
MARITIME SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 331318
New
DIBBS
CLAMP, BLOCK, SECTIONThe contract pertains to the procurement of 19 units of CLAMP, BLOCK, SECTION with NSN 5340-01-483-3923 under solicitation SPE7L1-26-T-810W, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within 168 days of award, and full and open competition applies without any set-aside restrictions. The technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item is subject to stringent cybersecurity compliance, requiring the contractor to be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization. Additionally, the product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly permitted by the specification. Technical data associated with this item is subject to stringent export controls under ITAR or EAR, restricting access to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and verified authorization through DLA. All handling of export-controlled data must comply with DFARS 252.225-7048, and disclosure to foreign persons—even within the U.S.—is prohibited without authorization. Government identification must be removed from any non-accepted supplies prior to disposal or return. The point of contact for inquiries is Michael Nordahl at dlaflbc2prs@dla.mil, and responses are due by July 20, 2026.
LAND SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 331318
New
DIBBS
SPRING, FUEL CONTROLThis contract pertains to the procurement of a Spring, Fuel Control item identified by NSN 5360-00-918-8909 and part number 541982, supplied by ONTIC ENGINEERING & MANUFACTURING, INC, under solicitation SPE7LX-26-U-8747. The item is classified as a restricted source requiring government engineering source approval and is designated as a critical application item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which supersede all other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization adhering to specified DLA standards. The item has no shelf life and does not require Unique Item Identification per the service customer’s request. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attribute verification levels are fixed at VII, IV, and II for critical, major, and minor characteristics respectively. The contract mandates compliance with CMMC Level 2 Self-Assessment for cybersecurity and enforces configuration change management through formal engineering change proposals and variance requests. Delivery is FOB origin with a 111-day lead time, quantity fixed at 11 units with no variance allowed, and inspection and acceptance occur at destination. The unit of issue is each, with price set at $11.00 per unit, totaling $121.00, and this is a DLA Direct, CONUS procurement. All contractual obligations are subject to the DLA Master List revision in effect at the solicitation issue date.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

4 days ago

DEADLINE

in 11 days
View Details