Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SPRING, HELICAL, COMPRES

Active
SPE7L1-26-T-07S1Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a solicitation from the Department of Defense Land Supply Chain for the procurement of one helical compression spring, identified by NSN 5360-01-615-6606 and Kubota Tractor Corp part number 15841-5317-0. The order is designated under purchase request 7018203965 with a required delivery date of September 4, 2026, and a delivery window of five days. The agreement specifies that shipping must be handled via the fastest traceable means, excluding parcel post, with delivery and acceptance occurring at the destination. The item is to be shipped to the Letterkenny Army Depot in Chambersburg, Pennsylvania. Compliance with DLA packaging requirements, MIL-STD-129 marking standards, and specific technical quality requirements is mandatory for the fulfillment of this order.

General Info

DoD procurement of one helical compression spring for Letterkenny Army Depot by September 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

1 OVERCASH AVENUE BLDG 9950, CHAMBERSBURG, PA, 17201-4150, USA

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-07S1.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
Robert Warne
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING,HELICAL,COMPRESSION
SPRING<(>,<)> HELICAL<(>,<)> COMP
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
KUBOTA TRACTOR CORP 0XWR1 P/N 15841-5317-0
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018203965 0001 EA 1.000
NSN/MATERIAL:5360016156606
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7L1-26-T-07S1
SECTION B
PR: 7018203965 PRLI: 0001 CONT’D
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:DA OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W25G1Q
W0L6 USA DEP LETTERKENY
LETTERKENNY ARMY DEPOT
1 OVERCASH AVENUE BLDG 9950
CHAMBERSBURG PA 17201-4150
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W25G1Q
W0L6 USA DEP LETTERKENY
LETTERKENNY ARMY DEPOT
1 OVERCASH AVENUE BLDG 9950
CHAMBERSBURG PA 17201-4150
US
MARKFOR
W25G1Q
W0L6 USA DEP LETTERKENY
LETTERKENNY ARMY DEPOT
1 OVERCASH AVENUE BLDG 9950
CHAMBERSBURG PA 17201-4150
US
M/F: (TCN) W25G1Q624400YL
RDD:
PROJ: TP 1
SUPP ADD: W25G1Q SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2L FC: VF
Need Ship Date:00/00/0000 Original Required Delivery Date:09/04/2026
SPE7L1-26-T-07S1 NSN/Part Number: 5360-01-615-6606 Quantity: 1 EA Purchase Request: 7018203965QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-27DE
This contract is for the procurement of 30 hexagon head cap screws, identified by NSN 5305016688703 and part number BRKD-DBC-MHGB from JDCI Enterprises, Inc. The item is classified as a Commercial Off The Shelf product. Due to the proprietary nature of the technical data, there is no approved technical data package available for competitive procurement. The delivery requirement is set for 20 days after order, with shipping and inspection points designated as destination. The shipment is destined for Fleet Activities Sasebo in Japan, with packaging and marking requirements adhering to MIL-STD-2073-1E and MIL-STD-129. The contract incorporates specific DLA master list technical and quality requirements, including the removal of government identification from non-accepted supplies and the potential application of covered defense information. The original required delivery date is August 27, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, RIBBED SHOULDER
Solicitation # SPE4A6-26-T-27DK
This contract is for the procurement of 12,112 ribbed shoulder bolts, identified by NSN 5306014109087. The items are designated as critical application items and must adhere to strict quality and technical requirements, including CMMC Level 2 self-assessment and specific DLA packaging and marking standards. A key restriction is the prohibition of mercury or mercury-containing compounds in the hardware, preservation, and packaging. The agreement specifies a delivery timeframe of 121 days, with a required delivery date of May 6, 2027, shipping FOB Origin to DLA Distribution Red River in Texarkana, Texas. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract is a total small business set-aside under NAICS code 332722.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-27DM
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-27DM, is for the procurement of three shoulder screws identified by NSN 5305-01-508-1718. The contract requires delivery within 203 days after order and is categorized under NAICS code 332722. Performance is located in New Cumberland, Pennsylvania, with a response deadline of September 16, 2026. The agreement includes stringent regulatory and security requirements, including CMMC Level 2 certification for third-party assessment and adherence to DLA packaging and marking standards. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DOD export-control training to access the data. Additionally, the contract mandates the removal of government identification from non-accepted supplies and compliance with the DLA Master List of Technical and Quality Requirements.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, CONE SEAT, HE
Solicitation # SPE7L4-26-T-6740
This contract is for the procurement of 10,500 packages of plain hexagon cone seat nuts, identified by NSN 5310-01-021-9027 and AM General LLC part number EC12339403. The item is designated as a critical application item. Each package consists of 25 individual units. The solicitation is a total small business set-aside under NAICS code 332722, issued by the Department of Defense LSO Combat Vehicles and Armament. Delivery is required within 214 days, with a need ship date of May 27, 2026, and an original required delivery date of July 9, 2027. The shipment is FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates compliance with technical and quality requirements RA001, packaging requirements RP001 and MIL-STD-2073-1E, and marking standards per MIL-STD-129.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
BOLT, CLOSE TOLERANC
Solicitation # SPE4A6-26-T-26XK
This solicitation, issued by the Department of Defense ASC Commodities Division under number SPE4A6-26-T-26XK, is for the procurement of one close tolerance bolt, identified by NSN 5306-00-582-6419. The requirement is fully competitive and adheres to military and federal specifications. Delivery is required within five days after receipt of order, with the place of performance located at Fort Campbell. The contract incorporates several technical and quality requirements, including DLA packaging standards, physical identification and bare item marking, and the removal of government identification from non-accepted supplies. While covered defense information potentially applies, item unique identification is not required per the service customer. The response deadline for this solicitation is September 15, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
CORD, GLOW PLUG
Solicitation # SPE7L1-26-T-07S0
This solicitation, identified as SPE7L1-26-T-07S0, is issued by the Department of Defense Land Supply Chain for the procurement of one glow plug cord, part number 5340-01-537-1189. The contract requires delivery within five days after receipt of order and is to be performed in Chambersburg, Pennsylvania. The response deadline for this requirement is September 21, 2026. The procurement is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the contract includes a provision for the removal of government identification from any non-accepted supplies. The primary point of contact for this acquisition is Isabelle Szulewski.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-07W1
This contract is for the procurement of 299 O-rings under solicitation SPE7L1-26-T-07W1, identified by NSN 5331-01-513-7062. The items must be manufactured according to the current revisions of SAE AS3582 and SAE AMS3304J standards. Delivery is required within 133 days, with a final required delivery date of August 15, 2027, shipping FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. Strict quality and environmental compliance is required, including the prohibition of Class I ozone-depleting chemicals and the intentional addition of mercury. Because the items are susceptible to ultraviolet ray deterioration, they must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Sampling and inspection will be conducted at the destination following MIL-STD-1916 or ASQ H1331, and all marking and packaging must adhere to MIL-STD-129 and MIL-STD-2073-1E.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-27DL
This solicitation is for the procurement of 25 flat washers, identified by NSN 5310-00-182-6787 and part number LM307-34 from Lord Corp. The contract is issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-27DL, with a required delivery timeframe of 5 days after receipt of order. The agreement mandates strict adherence to DLA packaging requirements and physical identification marking standards. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. Technical and quality requirements are governed by the DLA Master List, and any non-accepted supplies must have government identification removed.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
HANDLE, MANUAL CONTROL
Solicitation # SPE7L1-26-T-07T4
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of eight manual control handles under part number 5340-01-614-0173. The contract requires delivery within five days after receipt of order and adheres to specific DLA packaging and quality requirements, including the removal of government identification from any non-accepted supplies. The solicitation, identified as SPE7L1-26-T-07T4, was posted on September 8, 2026, with a response deadline of September 21, 2026. It falls under NAICS code 332722 and is managed by Isabelle Szulewski. Technical and quality standards are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition size.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-27EC
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 20 socket head cap screws under NSN 5305-01-326-7582. The hardware must be manufactured from Nickel Alloy 400 with dimensions of .625-11 UNC3A x 1.000 nominal and a thread length of .530 nominal. The items must comply with FF-S-86E Type IV specifications, specifically utilizing a patch pellet or strip thread as the locking feature. The contract is being procured as fully competitive under NAICS code 332722. Delivery is required within 98 days after receipt of order, with the place of performance located in New Cumberland, Pennsylvania. The solicitation, identified as SPE4A6-26-T-27EC, was posted on September 8, 2026, with a response deadline of September 16, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
ANODE, CORROSION PREVEN
Solicitation # SPE4A7-26-T-719W
This contract is for the procurement of one corrosion preventive anode, identified by NSN 5342015864347. The item is designated as a critical application item and must comply with MIL-DTL-24779D and QPL-24779 Type LES. Because this is a Qualified Products List and Qualified Manufacturers List item, it must be produced by an accredited manufacturer or assembling distributor listed in the Performance Review Institute QML or QPL. The agreement mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. A strict prohibition is placed on the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging. Delivery is set for 20 days after the order, with the destination and acceptance point located at DLA Distribution Pearl Harbor in Hawaii. Sampling and quality assurance must follow MIL-STD-1916 or ASQ H1331 standards.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A5-26-Q-0741
This firm fixed price contract, solicitation number SPE4A5-26-Q-0741, is for the procurement of 85 plain hexagon nuts, identified as Boeing part number ST7M223T16L. The items are designated as critical application items and must be delivered to DLA Distribution Warner Robins within 196 days after the order is placed. The contract mandates strict adherence to quality and security standards, including CMMC Level 2 self-assessment, ISO 9001:2015 quality requirements, and the DLA Master List of Technical and Quality Requirements. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331 standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
BRACKET, DOUBLE ANGLE
Solicitation # SPE7L1-26-T-07V7
This contract is for the procurement of four double angle brackets, identified by NSN 5340-00-935-8821 and part number TA149D12-13-8. The order requires delivery within 20 days, with a required delivery date of August 28, 2026. Shipping is FOB Origin, and the destination for inspection and acceptance is Fort Stewart, Georgia. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Packaging must comply with DLA requirements and MIL-STD-129, with specific instructions to use ASTM D3951 for non-hazardous materials. All technical and quality requirements are subject to the DLA Master List, and shipments must be sent via the fastest traceable means, excluding parcel post.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
STANDOFF, THREADED, SPAC
Solicitation # SPE7L1-26-T-07U0
This contract is a solicitation for the procurement of one threaded spacing standoff, identified by NSN 5340016842104 and part number 936334 from DRS Sustainment Systems, Inc. The order is issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-07U0. Delivery is required within 10 days after order, with a required delivery date of September 3, 2026. The shipment is destined for the US Army A Co 501st DSB 1st BDE 1AD in Hohenfels, Germany, and must be sent via the fastest traceable means, excluding parcel post. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. Packaging must comply with MIL-STD-129 and ASTM D3951, unless the material is hazardous, in which case requirement IP025 applies. The terms specify FOB Origin, with both inspection and acceptance occurring at the destination. There is no allowed quantity variance for this item.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-07X1
This contract is for the procurement of ten helical compression springs, identified by NSN 5360004033451 and part number 45416 from Triumph Engine Control Systems LLC. The order is issued by the Department of Defense Land Supply Chain with a required delivery date of August 27, 2026, and a delivery window of 20 days. Shipping is FOB Origin with destination inspection and acceptance, requiring the fastest traceable means of transport to Naval Base Ventura County. Compliance with several technical and quality requirements is mandatory, including DLA packaging standards, the removal of government identification from non-accepted supplies, and specific documentation for source approval. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. Offerors not listed as approved sources must obtain and submit OEM source approval and technical data packages to the DLA.
Spring Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
PLUG, PROTECTIVE, DUST A
Solicitation # SPE7L1-26-T-07S2
This contract is for the procurement of one protective dust and moisture seal plug, identified by NSN 5340015371188 and Kubota Tractor Corp part number 16851-9601-0. The order is managed under solicitation SPE7L1-26-T-07S2 with a required delivery date of September 4, 2026, and a delivery timeframe of five days after order. The item is to be delivered FOB Origin to the Letterkenny Army Depot in Chambersburg, Pennsylvania, using the fastest traceable shipping method. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129, with packaging following ASTM D3951 for non-hazardous materials. It explicitly prohibits the use of Class I ozone-depleting chemicals and requires compliance with the DLA Master List of Technical and Quality Requirements. Inspection and acceptance will take place at the destination.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
HINGE, BUTT
Solicitation # SPE7L1-26-T-07U2
This contract is for the procurement of one butt hinge, identified by NSN 5340016805202 and part number 936031 from DRS Sustainment Systems, Inc. The item is designated as a restricted source item requiring engineering source approval by the government design control activity. Delivery is required within 20 days, with a required delivery date of September 3, 2026, and shipping is set as FOB Origin with inspection and acceptance occurring at the destination. The shipment is destined for the US Army A Co 501st DSB in Hohenfels, Germany, and must be sent via the fastest traceable means. Compliance with DLA master lists for technical and quality requirements is mandatory, including specific packaging standards such as MIL-STD-129 and RP001. If the material is hazardous, it must follow IP025 requirements; otherwise, it should be commercially packaged according to ASTM D3951.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
CRANK, HAND
Solicitation # SPE7L1-26-T-07U9
This solicitation issued by the Department of Defense Land Supply Chain is for the procurement of two hand cranks, specifically valve crankshafts, under part number 5340-01-108-8658. The contract requires delivery within 105 days after the order is placed and is categorized under NAICS code 332510. Performance of the contract is designated for New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality requirements as outlined in the DLA Master List, including specific packaging standards and the removal of government identification from non-accepted supplies. Notably, the item contains technical data subject to ITAR and EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
New
DIBBS
ANODE, CORROSION PREVEN
Solicitation # SPE7L1-26-Q-1609
This contract is a firm fixed price solicitation for the procurement of one corrosion preventative anode, identified by NSN 5340-01-724-4266 and part number 120744M from Cathelco Ltd. The item must adhere to source controlled drawing 1X4F3 AMSCBDOC and meet specific technical and quality requirements, including the prohibition of class I ozone depleting chemicals and compliance with CMMC Level 2 self-assessment and covered defense information standards. Delivery is required within 165 days after the order, with inspection and acceptance occurring at the destination. The shipment is destined for the USS Zumwalt DDG 1000 and must be transported via traceable means, excluding parcel post. Packaging must comply with DLA requirements, specifically RP001 and MIL-STD-129, with hazardous materials following IP025 or non-hazardous items following ASTM D3951. Quality assurance and sampling will be conducted according to MIL-STD-1916 or ASQ H1331, and all military property must be marked in accordance with MIL-STD-130N.

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
GEAR, SPUR
Solicitation # SPE7L1-26-T-07U7
This contract is for the procurement of four spur gears, identified by NSN 3020-01-384-2223 and Moog Inc. part number 85020000-02. The acquisition is managed by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-07U7. Delivery is required within 144 days, with a need ship date of September 8, 2026, and an original required delivery date of January 3, 2027. The terms specify FOB Origin with inspection and acceptance occurring at the destination. Packaging must adhere to ASTM D3951 and MIL-STD-129, while following DLA packaging requirements for procurement. All supplies must comply with the DLA Master List of Technical and Quality Requirements, including the removal of government identification from non-accepted supplies. Shipments are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, ACTU
Solicitation # SPE7L1-26-T-07V8
This solicitation from the Department of Defense Land Supply Chain is for the procurement of 31 linear actuating cylinder assemblies under solicitation number SPE7L1-26-T-07V8. The items must be finished with a top coat conforming to Department of Transportation highway gloss yellow color 13538 per FED-STD-595. Delivery is required within 191 days after the order is placed, with the place of performance located in Tracy, California. The contract is subject to strict regulatory and quality requirements, including DLA packaging standards, CMMC Level 2 certification, and the prohibition of Class I ozone depleting chemicals. Because the project involves technical data subject to ITAR or EAR export controls, contractors must have approved US/Canada Joint Certification Program certification and complete specific DOD training to access the data. Inspection and acceptance will occur at the origin, and the contract adheres to tailored higher level quality requirements for manufacturers.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS