Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SPRING, HELICAL, TORSION

Active
SPE7L1-26-T-851RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 20 helical torsion springs identified by NSN 5360-01-371-0694 under solicitation SPE7L1-26-T-851R, with a delivery deadline of 158 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with applicable revisions determined by the solicitation or award date depending on acquisition size. The product must comply with stringent material restrictions, including a total prohibition on Class I ozone-depleting chemicals and any form of asbestos; substitutes require formal approval unless explicitly authorized. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major unless otherwise defined, and acceptance requires zero non-conformances in the sample lot unless the contract states otherwise. The manufacturer may choose between attribute or variable inspection methods under MIL-STD-1916. A full, unrestricted technical data package is available. The item must be delivered to Greensboro, North Carolina, and all supplies must be free of asbestos. The primary point of contact is Derek Roberts, reachable via email and phone, with responses due by July 30, 2026.

General Info

Procure 20 helical torsion springs, NSN 5360-01-371-0694, delivery in 158 days, zero asbestos, inspect per MIL-STD-1916.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332613 - Spring ManufacturingView NAICS

Place of Performance

6920 WEST MARKET STREET, GREENSBORO, NC, 27409, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-851R Request for Quotations DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
DEREK ROBERTS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING,HELICAL,TORSION
SPRING, HELICAL, TORSION
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
AN UNRESTRICTED TECHNICAL DATA PACKAGE IS AVAILABLE FOR THIS NSN.
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5360-01-371-0694 Quantity: 20 EA Purchase Request: 7017439846QTY: 20 Delivery: 158 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332613
New
DIBBS
Precision Tube Fittings ManufacturingThe contract entails the manufacture and supply of 1,409 ELBOW, TUBE TO BOSS fittings conforming to MIL-DTL-18866K and MS51527G military specifications, requiring full compliance with all dimensional, material, and performance standards outlined in these guidelines. The work includes precision machining, rigorous inspection protocols, and proper packaging and labeling in accordance with U.S. military requirements to ensure readiness for defense logistics use. All components must be produced to meet the exacting quality and traceability standards mandated for military-grade hardware. The contract is classified as a subcontract under the NAICS code 332613 for Other Fabricated Wire Product Manufacturing and is administered by the Defense Logistics Agency, a component of the Department of Defense. Although no solicitation number or specific place of performance is provided, the award is linked to the DIBBS system under contract number SPE7M126P8910, and the posting date indicates the award was made in July 2026. The fittings will support military infrastructure and systems requiring certified tubing connections, with the full scope of work encompassing end-to-end production from raw material processing to final delivery in compliance with federal defense procurement protocols.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 332613
New
DIBBS
Electrical Component Manufacturing and SupplyThe contract calls for the manufacture or supply of an electrical coil identified by NSN 5950-01-718-9999, requiring full compliance with military and federal specifications to ensure operational reliability and interoperability within defense systems. The work is classified as a subcontract under NAICS code 332613, which pertains to other electrical equipment and component manufacturing, and the performance location is designated as Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, with no set-aside provisions indicated, meaning all eligible vendors may respond without restriction based on small business or other classifications. The contracting activity is managed by the Land Supply Chain under the Department of Defense, and the contract is accessible via the DIBBS platform for detailed submission requirements and documentation.
LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
Helical Compression Spring ManufacturingThe contract requires the manufacture and delivery of 410 helical compression springs identified by NSN 5360-00-953-9554, fully compliant with applicable military specifications and environmental regulations. All springs must be produced to exact technical standards and delivered FOB origin within a strict 20-day window from the date of award. The solicitation is categorized as a subcontract under NAICS code 332613, indicating it falls within the forging and stamping industry sector, and is issued by the Department of Defense through the LAND SUPPLY CHAIN organization. The opportunity was posted on July 20, 2026, with responses due by July 31, 2026, and the place of performance is not specified, implying production and shipment may originate from the contractor’s facility. All deliveries must adhere to DOD procurement protocols and be tracked through the designated DIBBS portal.
LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThis contract is for the procurement of 410 helical compression springs identified by NSN 5360-00-953-9554 and part number 49223, supplied by B E AEROSPACE INC. SERVICES DIV. The item must be delivered within 20 days FOB origin with no tolerance for quantity variance. All supplies must comply with stringent environmental restrictions, including a complete prohibition on ozone-depleting chemicals and the intentional use of mercury or mercury-containing compounds, except for specific functional applications authorized by NAVSEA, such as batteries, fluorescent lights, and certain instruments, which must meet additional containment and safety standards. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03 from August 2016, and all packaging must adhere to MIL-STD-2073-1E with specific handling, wrapping, and marking requirements in accordance with MIL-STD-129. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions controlled by the solicitation or award date depending on acquisition scale. The delivery destination is a U.S. military facility in Geilenkirchen, Germany, with designated freight forwarding and marking instructions provided. The contract is part of a solicitation issued under SPE7L1-26-T-854B with a response deadline set for July 31, 2026, and the item falls under NAICS code 332613 for spring manufacturing.
LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRESThe contract specifies the procurement of a helical compression spring, part number 28296 from Eaton Corporation, with NSN 5360014229289, for a quantity of 52 units at a unit price of $52.00, totaling $2,704. Delivery is required within 84 days from the contract date, with shipment FOB origin and inspection and acceptance occurring at the destination. The item is designated as a critical application item, subject to stringent quality controls and zero-defect acceptance standards under MIL-STD-1916 or comparable zero-based sampling plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must conform to ASTM D3951 and MIL-STD-129 labeling requirements, with palletization following DLA’s RP001 packaging guidelines, and all technical and quality requirements from the DLA Master List supersede any conflicting standards. The deliverable must be shipped to Industries of the Blind Inc in Greensboro, NC, with a required ship date of July 9, 2026, and an original delivery deadline of February 7, 2027. The solicitation was issued under contract SPE7M4-26-T-240J, categorized under NAICS code 332613, with Rory O’Reilly from the Department of Defense’s Fluid Handling Division as the point of contact.
FLUID HANDLING DIVISION

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThis contract pertains to the procurement of three helical compression springs identified by NSN 5360-01-512-2004 and part number S11414, manufactured by Dante Valve Company. The items are classified as critical application components and must comply strictly with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 packaging requirements. The delivery schedule requires shipment within 72 days of contract issuance, with delivery FOB origin and inspection and acceptance occurring at the destination. The quantity is fixed at three units with no tolerance for variance. The consignee is Industries of the Blind Inc in Greensboro, North Carolina, and the specified need date is June 9, 2026, though the original required delivery date was May 15, 2026. All documentation and sourcing approvals must meet RC001 requirements, and government identification must be removed from non-accepted supplies per RQ011. The solicitation number is SPE7L5-26-T-4320 with a response deadline of July 23, 2026, and the procurement is administered by the Department of Defense through Land Supplier Operations Engines.
LAND SUPPLIER OPNS ENGINES

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThis contract specifies the procurement of three helical compression springs with precise technical parameters: an inside diameter of 0.523 inches, a load rating of 275.00 pounds, a free length of 2.094 inches, a deflection rate of 625.00 pounds per inch, and a loaded length of 1.650 inches. The springs are manufactured from steel compliant with AMS 5673, Condition C, Type 17-7 PH, and feature squared and ground ends on both sides. They are classified as a critical application item with part number 29351 produced by Eaton Aerospace LLC and identified by NSN 5360-01-034-8433. All items must be marked in strict accordance with MIL-STD-129, including the contract number, lot and serial numbers if available, contractor’s CAGE code, manufacturer’s code, and part number. Packaging must comply with ASTM D3951, but DLA Master List technical and quality requirements take precedence, and packaging must also meet RP001 DLA packaging standards. Ozone-depleting chemicals are strictly prohibited in any phase of production or handling, and any substitutes require prior approval. The springs are to be delivered FOB origin in three units with zero variance allowed in quantity, inspected and accepted at destination after a 168-day delivery window following the contract award. The original required delivery date is April 5, 2027, with a needed ship date of January 5, 2027. All items must be palletized per DLA packaging guidelines, and each unit pack must carry the specified marking requirements. The delivery address is Arizona Industries for the Blind in Phoenix, AZ, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The contract, issued under solicitation SPE7M4-26-T-243S by the Department of Defense’s Fluid Handling Division, emphasizes full compliance with technical specifications, material certifications, and labeling protocols, with all applicable standards superseding any conflicting requirements.
FLUID HANDLING DIVISION

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThe contract is for the procurement of seven helical compression springs with NSN 5360-01-331-1111 under solicitation SPE7L5-26-T-4315, issued by the Department of Defense through the Land Supplier Operations Engines office. The response deadline is July 23, 2026, with delivery required within 39 days of award, and performance will occur in Phoenix, Arizona. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect on the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are considered major. Zero non-conformances are required in samples unless otherwise directed. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with supplied hardware except in specific applications such as batteries, fluorescent lights, functional instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. All items must be marked per MIL-STD-130N for U.S. military property identification.
LAND SUPPLIER OPNS ENGINES

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThe contract solicitation SPE7M1-26-U-4373 calls for the procurement of 124 helical compression springs identified by NSN 5360-00-798-7092 under an indefinite-delivery, indefinite-quantity contract with a guaranteed minimum of 18 units and a maximum value of $350,000. Delivery is required within 78 days after delivery order issuance, with shipment terms FOB origin. The item is subject to stringent quality and compliance standards, including ISO 9001:2015 certification for both manufacturers and non-manufacturers, and requires Cybersecurity Maturity Model Certification (CMMC) Level 2 accreditation for the offering organization. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 Table 1 for sampling, with zero non-conformances mandated in inspection samples unless otherwise specified, and acceptance criteria define AQL levels of 0.1 for critical, 1.0 for major, and 4.0 for minor attributes. Packaging and marking must conform to ASTM D3951 and MIL-STD-129, with Unit of Issue and National Stock Number clearly labeled; however, Item Unique Identification is not required per DFARS 252.211-7003. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048 and DLA’s Joint Certification Program for authorized access. The contractor must comply with hazardous materials labeling under 29 CFR 1910.1200, submitting hazard labels and safety data sheets for approval prior to award, and must adhere to cybersecurity safeguarding provisions including NIST SP 800-171 and FAR 52.240-93. Payment is processed through WAWF, and inspections occur at the destination point, conducted by the Government. The solicitation is open to small business concerns, including those eligible for HUBZone, WOSB, and SDVOSB preferences, with proposals due by July 23, 2026, via the DLA-BSM electronic portal.
MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThis contract pertains to the procurement of 22 helical compression springs with NSN 5360-99-726-4764 and part number 2284W223 manufactured by Honeywell Aerospace Yeovil, classified as a critical application item. The contract is issued under solicitation SPE7L1-26-T-812H with a delivery requirement of 168 days from award, and the original required delivery date is April 27, 2027. The unit of issue is each, priced at $22.00 per unit, totaling $484.00. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which override other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements RP001, with palletization in accordance with specified guidelines. The springs must not contain intentionally added mercury or mercury compounds except for permitted uses in batteries, fluorescent lights, instruments, sensors, control systems, or chemical reagents approved by NAVSEA. Portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. The destination for delivery is Arizona Industries for the Blind in Phoenix, AZ, with transportation instructions governed by DLAD Proc Notes C19 and C20. The supplier must also comply with documentation requirements for source approval and government identification removal procedures, and the contract falls under the Covered Defense Information provisions.
LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThis contract solicits 36 helical compression springs with part number 544951 and NSN 5360-00-919-6623 under solicitation SPE7L1-26-T-823D, issued by the Defense Logistics Agency for a total small business set-aside. The springs must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. The product must be heat-sealed in a barrier bag for cleanliness and preserved using Method 31, with packaging that minimizes plastic use without compromising protection. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise specified, and attributes are to be classified with defined verification levels or AQLs. The supplier must also maintain Cybersecurity Maturity Model Certification Level 2 self-assessment compliance and adhere to all DLA packaging and transportation directives, including the specified freight shipping address to Industries of the Blind Inc in Greensboro, NC. Delivery is required within 168 days of award, with no variance in quantity allowed, inspection and acceptance occurring at destination, and the original delivery date set for February 20, 2027, though the need ship date is January 5, 2027. The unit price is $36.00 per unit, resulting in a total contract value of $1,296.
LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPThe contract pertains to the procurement of two helical compression springs identified by NSN 5360-00-839-6420 under solicitation SPE7L1-26-T-854T, with a required delivery within 94 days of award. The supplies are to be furnished to a performance location in Phoenix, Arizona, 85043, under the authority of the Department of Defense’s Land Supply Chain. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the hardware or its direct contact surfaces, except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and incorporate a secondary containment boundary as mandated by NAVSEA 5100-003D. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and the primary point of contact is Kelly Day at the DLA, reachable via email or phone for inquiries.
LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 541611
New
DIBBS
Small Business Subcontracting & Socioeconomic Compliance SupportThe contract seeks support for small business representation, certification under programs such as WOSB, SDVOSB, and HUBZone, and the structuring of joint ventures to ensure full compliance with federal socioeconomic regulations. Providers will assist government contractors and subcontractors in navigating complex certification requirements, maintaining eligibility, and adhering to reporting and documentation standards necessary for participation in set-aside programs. The scope includes ongoing guidance on regulatory changes, audit readiness, and strategic alignment with procurement goals tied to small business utilization. Performance is required at Pineville, Louisiana, with a response deadline of July 31, 2026, and the solicitation falls under NAICS code 541611 for management consulting services. The contracting organization is the Department of Defense through the Land Supply Chain office. While the exact award mechanism or funding details are not specified, the nature of the work implies an ongoing advisory or consulting engagement rather than a traditional deliverable-based contract. All proposers must demonstrate proven experience in federal small business certification processes and a deep understanding of Defense Acquisition Regulations and socioeconomic compliance frameworks.
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity & Covered Defense Information SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 controls to safeguard covered defense information and ensure compliance with cyber incident reporting requirements. This subcontract is issued under the Department of Defense’s Land Supply Chain and is focused on securing sensitive data within the defense supply chain by enforcing standardized cybersecurity practices outlined in the NIST framework. The place of performance is designated as Pineville, Louisiana, with a zip code of 71360-3737, indicating the geographic scope of the work. Proposals must be submitted by July 31, 2026, and the solicitation is categorized under NAICS code 541512, which corresponds to Computer Systems Design and Related Services. The work involves both initial deployment and continuous monitoring of security measures to meet federal requirements for protecting controlled unclassified information and promptly reporting any cyber incidents.
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires comprehensive identification, classification, and documentation of hazardous materials to ensure full compliance with OSHA and DFARS regulations. This includes the accurate authoring and timely submission of Safety Data Sheets (SDS) for all identified substances, with strict adherence to federal safety and reporting standards. The work must support the Department of Defense’s supply chain operations by maintaining rigorous hazardous materials management protocols, ensuring that all documentation meets the legal and operational requirements for handling, storage, and transportation of dangerous goods. Performance of this subcontract is designated for Pineville, Louisiana, under the NAICS code 541620, which pertains to environmental consulting services. Responses are due by July 31, 2026, following a posting date of July 20, 2026. The contract falls under the scope of the Land Supply Chain organization within the Department of Defense, emphasizing its critical role in military logistics and safety compliance. All activities must align with federal defense acquisition regulations, and failure to meet SDS submission deadlines or classification standards may result in non-compliance penalties or contract termination.
Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
Supply of Mechanical Housing Unit (NSN: 3040-01-519-2481)The contract requires the manufacture or sourcing, packaging, labeling, and delivery of a mechanical housing unit identified by NSN 3040-01-519-2481, with full compliance to DLA specifications, ASTM D3951 for packaging of military materiel, and MIL-STD-129 for military labeling requirements. All work must be performed to meet stringent defense standards for durability, identification, and logistics handling, ensuring seamless integration into military supply chains. Packaging and labeling must include appropriate barcodes, part numbers, and handling instructions as mandated by federal military guidelines. The solicitation is structured as a subcontract under the NAICS code 333613, which corresponds to other engine equipment manufacturing, and falls under the Department of Defense’s Land Supply Chain organization. The place of performance is designated as Pineville, Louisiana, with a ZIP code of 71360-3737. Proposals are due by July 31, 2026, following a posting date of July 20, 2026. While no set-aside type is specified, bidders must be prepared to demonstrate capability in fulfilling defense-grade production and logistical demands with precise adherence to technical and procedural requirements.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
Technical Data Packaging and Marking ComplianceThe contract requires technical and quality assurance support to ensure all items meet military packaging and marking standards, specifically MIL-STD-129, MIL-STD-130N, and MIL-STD-2073-1E, to guarantee proper identification, handling, and logistics tracking throughout the supply chain. This subcontract is focused on compliance with Department of Defense requirements and will be executed at the place of performance in Greensboro, North Carolina, with a zip code of 27409. The work involves verifying that all materials are labeled, packaged, and documented in full accordance with the specified military standards to maintain operational readiness and supply chain integrity. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, indicating a narrow window for proposers to submit their qualifications. The NAICS code 541380 classifies this as a professional, scientific, and technical services contract, emphasizing technical expertise over general labor or manufacturing. The agency responsible is the Department of Defense under the Land Supply Chain organization, and the contract is specifically designated as a subcontract, meaning it supports a larger procurement effort. All work must be completed with precision and traceability to meet the stringent demands of military logistics and inventory systems.
Testing Laboratories and Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Handling and Compliance SupportThis contract requires full compliance with federal and defense regulations pertaining to the safe handling, labeling, and documentation of hazardous materials, with specific emphasis on ocean transport of hazardous cargo. The contractor must implement and maintain rigorous protocols to ensure adherence to all applicable laws and standards governing hazardous material operations, including proper identification, packaging, marking, placarding, and recordkeeping throughout the supply chain. All activities must align with Department of Defense requirements and international maritime safety guidelines to mitigate risk and ensure operational continuity. The work is performed as a subcontract under the agency name LAND SUPPLY CHAIN, part of the Department of Defense, with the place of performance located in Greensboro, North Carolina, 27409. The contract falls under NAICS code 541690, indicating it involves other scientific and technical consulting services, suggesting a focus on advisory, compliance, and procedural support rather than direct logistics or transportation. Responses are due by July 31, 2026, and the opportunity was posted on July 20, 2026, through the DLA DIBBS platform. No set-aside provisions are specified, and the contract is open to eligible subcontractors seeking to support defense-related hazardous materials compliance efforts.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
Helical Compression Spring Manufacturing and SupplyThe contract calls for the manufacture and supply of eight helical compression springs designated by NSN 5360-01-605-8091 and part number 160-15-12, with full compliance to Department of Defense technical standards governing material composition, dimensional tolerances, load characteristics, and surface finish. All units must adhere strictly to packaging and marking requirements as defined by DLA, including proper labeling, traceability codes, and handling instructions, while also complying with all applicable hazardous material restrictions to ensure safe transport and storage. The springs are intended for use within military logistics systems and must be delivered in a configuration ready for immediate integration without additional modification. The solicitation is classified as a subcontract under NAICS code 332722, with a response deadline of July 31, 2026, and a posting date of July 20, 2026. The place of performance is specified as Greensboro, North Carolina, with a zip code of 27409, indicating where final delivery and acceptance will occur. The contracting authority is the Land Supply Chain under the Department of Defense, though no specific point of contact or set-aside classification is provided. Bidders must ensure full alignment with DLA’s contractual and technical expectations, including documentation, quality assurance protocols, and adherence to federal supply chain security measures.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & SDS ManagementThe contract requires the identification, labeling, and submission of Safety Data Sheets for hazardous materials contained in supplied kits, ensuring full compliance with Occupational Safety and Health Administration and Department of Defense regulations. All SDS documentation must be accurately processed and delivered according to established federal standards, with strict attention to detail to maintain regulatory adherence and operational safety. The work is governed under NAICS code 541620 and is structured as a subcontract under the Land Supply Chain division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and performance is expected to align with DoD supply chain requirements, though specific performance locations are not detailed. While no set-aside preferences are indicated, the contract mandates precise documentation practices for hazardous material handling and reporting, underscoring the critical nature of safety and regulatory compliance in the delivery of kit components. All submissions must be made through the designated DIBBS platform using the provided solicitation number.
Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Kitting ServicesThe contract requires comprehensive packaging, preservation, unitization, and labeling services for mechanical parts kits in full compliance with Department of Defense and Defense Logistics Agency standards. All work must meet military specifications for durability, environmental protection, and traceability to ensure readiness and operational effectiveness across the supply chain. Services must be performed in accordance with established protocols for material handling, corrosion prevention, and secure packaging to safeguard components during storage and transit. This subcontract is categorized under NAICS code 493190 and is issued by the Land Supply Chain office within the Department of Defense. The solicitation was posted on July 20, 2026, with proposals due by July 31, 2026. Performance locations and specific delivery points are not detailed in the provided data, but compliance with DLA requirements for documentation, labeling, and unitization is mandatory. Interested parties must submit responses through the designated DIBBS platform prior to the deadline.
Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
Hydraulic Front Suspension Cylinder Kit SupplyThe contract calls for the supply of ten hydraulic front suspension cylinder kits, specifically designed to meet rigorous military standards in functionality and durability. All units must be packaged, marked, and documented in full compliance with federal military packaging and labeling regulations, including accurate hazardous material reporting to ensure safe handling and transportation throughout the supply chain. The work is categorized under NAICS code 332994, indicating specialized aerospace and defense component manufacturing, and is structured as a subcontract under the Department of Defense’s Land Supply Chain organization. Proposals must be submitted no later than July 31, 2026, with the solicitation posted on July 20, 2026, providing a ten-day window for response. Performance is expected to align with Defense Logistics Agency protocols, and all deliverables must adhere to the technical and administrative requirements outlined in the DIBBS RFQ system under reference number SPE7L126T853R.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
Linear Actuator Parts Kit SupplyThe contract awards the supply of ten linear actuator parts kits, identified by NSN 3040-01-167-2873 and part number 666-2331-07, under a subcontract arrangement with the Department of Defense through LAND SUPPLY CHAIN. All units must be packaged and labeled in strict compliance with military standards to ensure handling, storage, and operational readiness. Delivery is specified as FOB origin, meaning the supplier assumes responsibility until the goods are loaded at the point of origin, with final destination being Cairo, Egypt. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and the NAICS code 333613 confirms the industrial classification for industrial machinery manufacturing. The contract is not set aside for any specific small business category and requires full adherence to defense logistics protocols without exception.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Commercial Item Logistics & FOB Destination DeliveryThe contract requires the transportation and delivery of TCOM-200-PUR-DB cable to Tobyhanna, PA, with a strict five-day deadline from the date of order placement, and delivery must be made under FOB destination terms, meaning the seller assumes all risks and costs until the goods arrive at the specified location. If the shipment involves sea transport, compliance with U.S.-flag vessel requirements is a potential condition that must be met, ensuring adherence to federal maritime regulations. The contract is classified as a subcontract under the NAICS code 484220, which pertains to truck transportation and related logistics services, and is managed by the Department of Defense through its LAND SUPPLY CHAIN organization. The place of performance is clearly identified as Tobyhanna, PA, with a zip code of 18466-5050, and the solicitation was posted on July 20, 2026, with responses due by July 31, 2026. All logistics must be executed to meet the government's delivery timeline and regulatory compliance standards without delay or deviation.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details