Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

SPRING

Active
SPE7L1-26-T-906GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a single unit of a part identified by NSN 5360-01-244-5786 under solicitation SPE7L1-26-T-906G, with a required delivery within five days of award. The requirement is governed by the DLA Packaging Requirements for Procurement and incorporates technical and quality standards referenced via R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The item must comply with the mandatory removal of government identification from non-accepted supplies. The procurement is managed by the Department of Defense’s Land Supply Chain, with performance delivery scheduled for Cherry Point, North Carolina, 28533-8051. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, with Kristina Derry listed as the primary point of contact, reachable via email and phone. The NAICS code 332722 identifies the industry classification, and no set-aside type has been designated for this acquisition.

General Info

Procure one NSN 5360-01-244-5786 part, deliver in five days to Cherry Point, NC, per DLA standards.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

PSC BOX 8051, CHERRY POINT, NC, 28533-8051, US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-906G.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SPRING
SPRING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR NSN/Part Number: 5360-01-244-5786 Quantity: 1 EA Purchase Request: 7017698445QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPE4A6-26-U-3296
This contract specifies the procurement of a screw with close tolerance, identified by NSN 5305-01-321-6120 and part number NAS1973T26T, manufactured to meet the non-government standard NAS1972 through NAS1980 Revision 7 and NAS4004 Revision 16. The item is classified as a commercial item and a critical application component requiring source inspection, with all threads of class 3A and 3B subject to dimensional verification per System 22 of FED-STD-H28/20, excluding very small internal and external threads. Manufacturing must adhere to the current revision of the applicable standard, and prior revisions are acceptable only for historically produced items. The manufacturing process requires forging, necessitating specialized tooling, and the supplier must comply with SAE AS9100 quality requirements, regardless of whether they are a manufacturer or non-manufacturer. All items must be marked per MIL-STD-130N paragraph 4.1.b(2) in addition to manufacturer logos and material identifiers, and packaged in accordance with MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero defect acceptance unless otherwise specified, and attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The contract is a total small business set-aside under NAICS 332722, with delivery due in 108 days FOB origin, no variance permitted in quantity, and inspection and acceptance occurring at the origin. The unit of issue is each, with a quantity of 65 units, and packaging must adhere to DLA’s packaging requirements including palletization standards. The solicitation is managed by the Defense Logistics Agency and is open to responses through the DIBBS system.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
BOLT, HOOK
Solicitation # SPE4A1-26-T-2504
The contract pertains to the procurement of 25 BOLT, HOOK items with NSN 5306-01-503-9383 under solicitation SPE4A1-26-T-2504, requiring delivery within 20 days to FPO AP 96672 aboard USS MAKIN ISLAND LHD 8. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. Packaging must follow DLA’s packaging requirements and be palletized according to RP001, with no tolerance for quantity variance—exactly 25 units must be delivered. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or ASQ H1331 with a zero-defect acceptance criterion unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The unit of issue is EA, with a unit price of $25.00 and a total contract value of $625.00. Items must be shipped via traceable transportation methods, avoiding parcel post, in accordance with DLAD PROC NOTES C19 and C20, and must bear proper identification per RQ017. The supplier, MCMASTER-CARR SUPPLY CO, must meet all government-unique requirements including the use of specified packaging data QUP:025 and reference to the correct DLA unit of issue standards. The required delivery date is July 27, 2026, and the contract is managed under the Department of Defense’s Aviation Supply Chain with primary point of contact Jade Stringfield.
AVIATION SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, HEXA
Solicitation # SPE4A6-26-T-11GS
A hexagonal plain slotted nut, identified by NSN 5310-00-849-6883, is being procured in a quantity of 14 units under a fully competitive solicitation governed by military and federal specifications. The procurement is managed by the ASC Commodities Division under the Department of Defense, with performance taking place at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation, numbered SPE4A6-26-T-11GS, was posted on August 2, 2026, with responses due by August 10, 2026, and falls under NAICS code 332722 for screw, nut, bolt, and fastener manufacturing. The delivery timeline is set at 89 days after award, and the primary point of contact for inquiries is Vincent Price, reachable via phone or email provided through the Defense Logistics Agency’s DIBBS system.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIVET
Solicitation # SPE4A0-26-T-4129
The contract specifies the procurement of 10 plain blind rivet nuts with the NSN 5310-00-934-0222, supplied in cadmium-plated steel, to be delivered within five days of award. All items must comply with stringent quality and identification standards, including MIL-STD-130N for military property marking and adherence to DLA packaging requirements. The contract mandates compliance with specific Contract Data Requirements Lists such as DD Form 1423s and CDRLs related to quality certification, removal of government identification from non-accepted supplies, and physical identification of bare items. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Quality conformance inspections are required, and the manufacturer may elect attribute or variable inspection methods under MIL-STD-1916. All technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling compliance. The solicitation number is SPE4A0-26-T-4129, posted August 2, 2026, with a response deadline of August 10, 2026, and the point of contact is Danita Davis of the Department of Defense’s Aviation Supply Chain ESoC Buys.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
GASKET AND PREFORME
Solicitation # SPE7L3-26-T-144U
The contract involves the procurement of a gasket and preformed packing assortment identified by NSN 5330015604081 and part number 285000840051880, with a total quantity of 57 thousand units to be delivered under solicitation SPE7L3-26-T-144U. Delivery is required within 46 days of contract award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The packaging must comply with MIL-STD-2073-1E specifications, including use of preservative method 33, dry packaging, and buffering materials, while marking adheres to MIL-STD-129 with no special marking required. The packaging and palletization must follow DLA’s procurement requirements, and hazardous materials handling is governed by IP025. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, with a needed ship date of August 5, 2025, though the original required delivery date was May 15, 2025. The item is strictly prohibited from containing asbestos as defined by FED-STD-313, and government identification markings in non-accepted supplies must be removed per RQ011. Technical and quality requirements referenced in this contract are sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions. The unit of issue is KT, with no variance allowed in quantity, and all data aligns with DoD standards for procurement and logistics.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-905C
This contract pertains to the supply of 20 gaskets identified by NSN 5330-01-596-7865, with a delivery requirement of five days after award. The solicitation number is SPE7L1-26-T-905C, issued on August 2, 2026, with responses due by August 13, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. Packaging must comply with DLA standards, and all supplies must be free of government identification upon rejection. The contract prohibits the intentional use of mercury or mercury-containing compounds in or on the hardware, except for functional applications in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. Asbestos, as defined in FED-STD-313, is strictly forbidden. Covered defense information provisions may apply, and the place of performance is specified as Chambersburg, Pennsylvania, with Kristina Derry of the Department of Defense’s Land Supply Chain as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
CLIP, SPRING TENSION
Solicitation # SPE7L1-26-T-903M
The contract pertains to the procurement of two CLIP, SPRING TENSION units with NSN 5340-01-596-7792 and part number 4982953 from CUMMINS INC, under solicitation SPE7L1-26-T-903M. Delivery is required within five days of award, with shipment originating from the supplier and delivered FOB origin to the Letterkenny Army Depot in Chambersburg, Pennsylvania. The quantity is strictly fixed at two units with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s master technical and quality requirements, prioritizing federal standards over ASTM D3951 if the item is non-hazardous, or with TQ requirement IP025 if hazardous per FED-STD-313. All packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA’s packaging guidelines. Shipping must occur via the fastest traceable method, explicitly excluding parcel post. The unit of issue is each, with a unit price of $0.000 and a total price of $2.000. The required delivery date is July 30, 2026, and the point of contact for inquiries is Kristina Derry of the Department of Defense.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7M1-26-T-244V
The contract pertains to the procurement of COVER, ACCESS under solicitation SPE7M1-26-T-244V, with a requirement for two units to be delivered within 77 days of award to Tracy, California, 95304-5000. The item is identified by NSN 5340-01-516-4047 and is part of purchase request 7012381335. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment later updates it. Strict prohibitions against intentional addition of mercury or mercury-containing compounds apply to all supplied hardware or materials, except for specific functional uses such as batteries, fluorescent lights, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Portable items containing mercury must be shockproof and include a secondary containment boundary as per NAVSEA 5100-003D. Identification marking must comply with MIL-STD-130N dated November 16, 2012. The contracting office is under the Department of Defense’s Maritime Supply Chain, with Haley Clark as the primary point of contact, and responses are due by August 13, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIV
Solicitation # SPE4A6-26-T-11GF
The contract entails the procurement of 300 units of NUT, PLAIN, BLIND RIV with NSN 5310-01-666-2654 under solicitation SPE4A6-26-T-11GF, with delivery required within 207 days FOB origin. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly. Sampling for quality verification shall follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise contracted, with attributes classified per critical, major, or minor levels corresponding to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or Navsea-specified chemical reagents; portable devices with mercury must include shock-proof construction and a secondary containment barrier as per NAVSEA 5100-003D. The product shall be manufactured to TDP Rev C Gen 3 per NAS1738 Rev 6 dated 11/30/2024, and the unit of issue is each (EA) with no variance allowed in quantity. Delivery is to be made to the DLA Distribution facility in New Cumberland, PA, with inspection and acceptance occurring at destination. The contract enforces zero tolerance for non-conforming items, requires full compliance with government identification removal protocols for rejected supplies, and mandates bare item marking per RQ017. The point of contact is Molitauoleava Langi, and the solicitation closed on August 10, 2026, with an original need date of March 6, 2027.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-11GW
The contract specifies the procurement of one shoulder screw, part number SR-16 with NSN 5305-01-549-2013, under solicitation SPE4A6-26-T-11GW, with a required delivery within 20 days from the contract date. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-130N for physical identification marking and MIL-STD-129 for labeling. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with designated verification levels or AQLs. The screw must be free of intentional mercury or mercury compounds throughout its manufacturing, packaging, and preservation, except for narrowly defined functional exceptions such as batteries or sensors, and even then must meet NAVSEA containment standards. Packaging must conform to MIL-STD-2073-1E with preservation methods specified, palletization as per DLA requirements, and prohibition of mercury in any preservation or packing materials. Delivery is FOB origin to the USS HYMAN G RICKOVER (SSN 795) in Groton, CT, with shipper required to use the fastest traceable means, explicitly excluding parcel post. The contract requires CMMC Level 2 self-assessment compliance, and all markings, packaging, and documentation must precisely follow government-prescribed formats, with no variance allowed in quantity.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
CLIP, RETAINING
Solicitation # SPE7L3-26-U-0666
The contract pertains to the procurement of CLIP, RETAINING with NSN 5340-00-675-2101 and part number 55008, under solicitation SPE7L3-26-U-0666, for a quantity of 161 units at a unit price of $161.00, totaling $25,921.00. Delivery is required within 116 days FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, including adherence to MIL-STD-129 for marking and labeling, and RP001 for packaging standards. Hazardous materials must be packaged per FED-STD-313 and TQ requirement IP025; non-hazardous items must be commercially packaged. Palletization must follow DLA’s procurement packaging requirements, and government identification must be removed from non-accepted supplies. The unit of issue is each (EA), and the contract specifies DLA Direct, CONUS coverage. The solicitation was posted on August 2, 2026, with a response deadline of August 17, 2026, under NAICS code 332722, managed by the Department of Defense’s Land Supplier Operations Vehicle Support. The primary point of contact is Stephen Weaver, reachable via email and phone. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List accessible through the designated website, with revision control determined by the solicitation or award date depending on acquisition size. Delivery is not guaranteed as the quantity is estimated and may not be fully purchased by the IDC. All packaging, labeling, and unit of issue must strictly align with contract specifications and DLA directives.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-11FC
The contract specifies the procurement of 271 units of screw, cap, hexagon head with NSN 5305-01-390-1169 under solicitation SPE4A6-26-T-11FC, with a required delivery date of March 10, 2027, and a 146-day delivery window. All items must comply with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, particularly those identified by R or I numbers, and packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Items are to be delivered FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. Palletization, unit packaging, and internal container details are strictly defined, and all shipments must be addressed to the specified receiving warehouse in Tracy, CA. The contract aligns with ASME B18.2.3.1M Rev DTD 12/31/1999 and uses the DoD authorized unit of issue, with payment tied to the provided CLIN and unit price structure.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE7L1-26-T-905A
The contract pertains to the procurement of two straight-headed pins with NSN 5315-01-648-4914 under solicitation SPE7L1-26-T-905A, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within five days of award, with performance located in Barstow, California, 92311-5015. The item is subject to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the contract incorporates mandatory compliance with export control regulations under ITAR or EAR, prohibiting unauthorized disclosure or export of technical data to foreign persons anywhere in the world. Contractors must hold an approved US/Canada Joint Certification Program certification, complete DLA-mandated training on handling export-controlled data, and pass the DLA Export-Controlled Technical Data Questionnaire to access such information. The solicitation requires CMMC Level 2 certification for any third-party assessment organization involved, and all responses must be submitted by August 13, 2026. Point of contact is Kristina Derry, with the solicitation available via the DIBBS portal and governed by DFARS 252.225-7048 for export controls.
Other Fabricated Wire Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-904V
The contract pertains to a single gasket item identified by NSN 5330-01-165-1362 with a quantity of one unit, subject to delivery within five days of award. All supplies must be free of asbestos, and any substitutions must comply with Clause L30 and Provision 4 conditions. The item must be marked in accordance with MIL-STD-130N dated November 16, 2012, for identification of U.S. military property, and government identification must be removed from any non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Covered Defense Information may apply, and packaging must meet DLA procurement standards. The solicitation number is SPE7L1-26-T-904V, issued on August 2, 2026, with responses due by August 13, 2026. The place of performance is Beaufort, South Carolina, 29904-6120, and the contract is managed by the Department of Defense’s Land Supply Chain under NAICS code 339991. Primary point of contact is Kristina Derry, reachable via email and phone provided.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333618
New
DIBBS
AIR CLEANER, INTAKE
Solicitation # SPE7L1-26-T-904M
The contract is for the procurement of six air cleaner intake units with part number 981-1.5-08-V-44-50-V and NSN 2940017247554, issued under solicitation SPE7L1-26-T-904M by the Department of Defense’s Land Supply Chain. Delivery is required within 133 days from contract award, with FOB origin terms and no quantity variance allowed. The items must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and unit containment, with no special marking required. Palletization must adhere to DLA Packaging Requirements, and all items must be free of Class I ozone-depleting chemicals, overriding any conflicting specification requirements unless substitute chemicals are pre-approved. The contract is a total small business set-aside under NAICS code 333618, with a unit price of $6.00 per unit and a total contract value of $36.00. The required delivery date is December 25, 2026, and all transportation logistics must follow DLA Procurement Notes C19 and C20.
Other Engine Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
LATCH SET, RIM
Solicitation # SPE7L1-26-T-902K
The contract is for the supply of a LATCH SET, RIM with NSN 5340-01-695-7631 and part number E3-129-025, totaling eight units to be delivered within five days of award under solicitation SPE7L1-26-T-902K. Delivery is FOB destination with no quantity variance permitted, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must conform to MIL-STD-129, with no special marking required. The product must be shipped in accordance with DLA packaging requirements and palletization standards. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components such as batteries, fluorescent lamps, or instrument sensors, in which case they must be shockproof with a secondary containment boundary as per NAVSEA 5100-003D. The contract incorporates technical and quality requirements from the DLA Master List, and all specifications are governed by the revision in effect at the solicitation or award date depending on acquisition size. The delivery address is a U.S. military postal facility in FPO AP 96306-0001, while the shipping origin is a Japanese military supply location. The unit price is $8.00, resulting in a total contract value of $64.00. The required delivery date is July 30, 2026, and government use identifiers, including IPD, DIC, and FC codes, are provided for internal tracking. The official point of contact is Michael Nordahl, reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC RO
Solicitation # SPE7L1-26-U-0535
The contract pertains to the procurement of a nonmetallic round section seal with NSN 5330-01-466-8565, quantity of 426 units, under solicitation SPE7L1-26-U-0535, issued by the Department of Defense’s Land Supply Chain. The item is classified under Federal Supply Classifications 5330/5331 and must be packaged in a medium duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation. Delivery is required within 97 days FOB origin, with no variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special markings required. All packaging and shipping activities must adhere to DLA’s packaging requirements, including provisions for hazardous materials. The contract strictly prohibits the intentional use of mercury or mercury-containing compounds in any component or contact surface, except for specific exemptions such as functional mercury in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents specified by NAVSEA, with portable items containing mercury requiring shockproof construction and a second containment boundary as per NAVSEA 5100-003D. Asbestos is completely prohibited under FED-STD-313. The requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The contract is a Women-Owned Small Business Set-Aside under NAICS code 339991, with pricing listed at a unit price for 426 units and total price calculated accordingly. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions determined by solicitation or award date depending on acquisition size. Contact for inquiries is Jennifer Payne, with the solicitation response deadline set for August 17, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-U-0532
The contract is for a helical compression spring, identified by NSN 5360-01-425-2997 and part number 471808, supplied by Dover Pumps & Process Solutions Segment under a total small business set-aside solicitation. The contract specifies a quantity of 29 units to be delivered FOB origin within 104 days, with no variance allowed in quantity. All items must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking needed. The spring is classified as a critical application item, and the contract strictly prohibits intentional addition or direct contact of mercury or mercury-containing compounds in or on the hardware, except for approved functional uses such as in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must include a second containment boundary and be shockproof per NAVSEA 5100-003D. Inspection and acceptance occur at the destination. The contract is governed by the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined by the solicitation issue date. Delivery is managed under DLA Direct, CONUS coverage, and unit of issue is each (EA). The solicitation number is SPE7L1-26-U-0532, with a response deadline of August 17, 2026, and the procurement is administered by the Department of Defense’s Land Supply Chain.
Spring Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-905P
The contract pertains to the procurement of O-RINGS with NSN 5331-01-652-8142, requiring delivery of 74 units under solicitation SPE7L1-26-T-905P. The item is classified as a Type I shelf-life item with a non-extendable 60-month shelf life, subject to strict traceability and packaging requirements under DLA directives including DLAD Procurement Note C03 for supply chain documentation retention and MIL-DTL-117 Type II Class C Style 1 for opaque, waterproof, greaseproof packaging to protect against UV degradation. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special code 32 indicating Type I shelf life, and palletization must follow DLA Packaging Requirements for Procurement. Delivery is FOB origin with no quantity variance, inspection and acceptance occur at destination, and shipment must be completed within 103 days by November 25, 2026. The item is designated as non-surplus acceptable, and all technical and quality standards referenced, including those identified by R and I numbers, are governed by the DLA Master List. Transportation logistics adhere to DLAD Procurement Notes C19 and C20, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is governed by DoD unit of issue standards and incorporates applicable defense information handling requirements under RD003.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
STANDOFF, THREADED, S
Solicitation # SPE7L1-26-T-904Q
The contract pertains to the procurement of 15 units of a threaded standoff, part number 1002346-1 with NSN 5340-01-369-9617, supplied by Simmonds Precision Products Inc located in Vergennes, VT, with CAGE code 89305. The requirement is governed by DLA packaging standards and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item must be delivered within five days after delivery order issuance, and the solicitation is issued under SPE7L1-26-T-904Q with a response deadline of August 13, 2026. The North American Industry Classification System code is 332510, and the contracting activity falls under the Department of Defense’s Land Supply Chain. The primary point of contact is Michael Nordahl, reachable via email and phone listed, and all supplies must comply with the requirement to remove government identification from non-accepted items. The solicitation is accessible through the DIBBS system and targets federal procurement under streamlined acquisition protocols.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, DUST
Solicitation # SPE7L1-26-T-903Z
This contract is for the procurement of one protective dust cap, identified by NSN 5340-01-696-9253 and part number 77C964400G2-FIND NO-8, under solicitation SPE7L1-26-T-903Z. The requirement is for a single unit to be delivered within 20 days of contract award, with delivery terms set at FOB origin and inspection and acceptance occurring at the destination. Packaging must fully comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping materials, and unit container codes, and palletization must adhere to DLA packaging requirements. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly authorized by the specification. Marking is unrestricted, with no special codes required, and shipping must be conducted via traceable means—parcel post is prohibited. The delivery address is the Navy Supply Logistics Center in Mechanicsburg, Pennsylvania, with contact information and government tracking codes provided for logistics and accountability. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition scale. The solicitation was posted August 2, 2026, with responses due by August 13, 2026, under a Federal NAICS code for manufacturing protective equipment.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7L1-26-T-904Z
The contract pertains to the procurement of one mounting plate identified by NSN 5340-01-716-2294 and part number 22-02993-00, with a delivery requirement of five days after award. The item must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and is subject to MIL-STD-130N for identification marking and MIL-STD-2073-1E for packaging. Packaging must adhere to DLA-specific guidelines including MIL-STD-129 for marking, with no special marking required, and palletization must follow DLA packaging requirements. The product is prohibited from containing any Class I ozone-depleting chemicals, and any substitute chemicals must be pre-approved unless explicitly permitted by specifications. The shipment is FOB origin, inspected and accepted at destination, with a zero variance tolerance on quantity. The delivery destination is Schofield Barracks, Hawaii, and the transportation and routing are governed by DLAD procedural notes C19 and C20. The contract is issued under solicitation SPE7L1-26-T-904Z, with a required delivery date of July 24, 2026, and was posted on August 2, 2026, with responses due by August 13, 2026. The procurement falls under NAICS code 332510 and is managed by the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the primary point of contact.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-903Q
This contract is for the procurement of one O-RING with NSN 5331-01-670-1894 under solicitation SPE7L1-26-T-903Q, with a response deadline of August 13, 2026, and a required delivery within five days of award. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must adhere to DLA standards, and all supplies must be stripped of government identification if not accepted. Documentation for source approval must meet RC001 criteria, and the contract prohibits the use of Class I ozone-depleting chemicals entirely, overriding any conflicting specification requirements while still enforcing product performance standards; alternative chemicals require prior approval. The item must also be completely free of asbestos, with any prior asbestos-containing codes or parts deemed unacceptable, and substitutions must undergo approval per Clause L30 and Provision 4 conditions. Covered defense information protections apply, and performance is to occur in Johnston, Iowa, with Kristina Derry at DLA as the primary point of contact.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details