Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

SSA - Mettler Toledo Rainin pipette tips

Active

1444State & Local

Response Deadline09/22/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Idaho Department of Administration, Division of Purchasing, has issued a notice of intent to approve a sole source authorization for the Idaho State Police to acquire Mettler Toledo Rainin pipette tips from Mettler Toledo - Rainin. This procurement action is conducted under Idaho Code section 67-9221, based on the determination that Mettler Toledo - Rainin is the only vendor qualified to provide the required commodities. The solicitation, identified as number 1444, was posted on September 17, 2026. Interested vendors who wish to challenge this sole source procurement must provide timely notice to the Division of Purchasing by the response deadline of September 22, 2026, in accordance with Idaho Code section 67-9232(4).

General Info

Idaho State Police sole source procurement of Mettler Toledo Rainin pipette tips.

Agency

State of IdahoView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(2)

ISP Mettler Toledo SSA letter 9-17-2026.pdf

PDF

ISP pipette tips 9-17-2026.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedSep 17

Solicitation

Response DeadlineSep 22

Submission deadline

Response Deadline

09/22/2026, 11:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyState of Idaho

ContactsNo contacts available

OfficeN/A

Organization / Agency

State of Idaho

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

The Idaho Department of Administration, Division of Purchasing, hereby publishes notice of intent to approve a sole source authorization for Idaho State Police to purchase Mettler Toledo Rainin pipette tips from Mettler Toledo - Rainin. This notice is being given pursuant to Idaho Code section 67-9221. The Administrator of the Division of Purchasing has determined that there is only one vendor qualified to provide this property (commodity or service). A copy of the request for sole source authorization is attached in the Buyer Attachments section of IPRO. Any interested vendor may file a challenge to this sole source procurement, in accordance with Idaho Code section 67-9232(4), by giving timely notice (within five (5) business days after the closing date of this IPRO Notice) to: purchasing@adm.idaho.gov.

Similar Contracts

Same NAICS industry code

Supply of Pressure Transmitters (NSN 6685150110655)This subcontract involves the sourcing and production of three pressure transmitters under NSN 6685150110655 for prime contractors supporting the Defense Logistics Agency. These components are designated as Critical Application Items and must be delivered to Tracy, California. The supplier is required to adhere to strict quality and labeling standards, specifically performing marking according to MIL-STD-129 and utilizing sampling methods based on MIL-STD-1916 or ASQ H1331 Table 1. The contract is managed by the ASC Supplier Oper OEM Division of the Department of Defense under NAICS code 334516.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

Supply of Differential Fluid Flow Indicating MetersThis subcontract involves the supply of differential fluid flow indicating meters for prime contractors under the Defense Logistics Agency. The provider must deliver end items that meet NSN 6680-01-565-0791 and adhere to the technical and quality requirements specified in the DLA Master List (RA001). All deliverables must comply with RP001 packaging standards and DFARS 252.204-7012 cybersecurity regulations. The opportunity is issued by the ASC Commodities Division of the Department of Defense and is designated as a Total Small Business Set-Aside under NAICS code 334516. Performance will take place in New Cumberland, Pennsylvania. The response deadline for this requirement is September 25, 2026.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Supply of Motional Pickup Transducers (NSN 6695-01-461-9815)

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

Supply of NRP, FTIR Rear Panel

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

MEASURING TUBE, GAS ANA

Solicitation # SPE2DH-26-T-6908

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 17 hours ago

DEADLINE

CAMERA, INFRARED, IND

Solicitation # SPE4A6-26-T-28JW

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Supply of Auto Droplet Generator

Department Of Health And Human Services

POSTED

about 22 hours ago

DEADLINE

Supply of SFM-3000 Stopped-Flow System and Components

National Institutes Of Health Olao

POSTED

about 22 hours ago

DEADLINE

Supply of Turbomolecular Vacuum Pumps for Secondary Ion Mass Spectrometers

Department Of Commerce Nist

POSTED

about 22 hours ago

DEADLINE

Quantom Tx™ Microbial Cell Counter System

National Institutes Of Health Olao

POSTED

about 22 hours ago

DEADLINE

Mettler Toledo SPE404-C weigh module and associated components

Solicitation # 75N98026Q01232-05020

Solicitation 75N98026Q01232-05020 is a firm fixed price request for quote issued by the National Institutes of Health Office of Logistics and Operations to acquire five Mettler Toledo SPE404-C high-precision weigh modules and associated components. The equipment must meet specific technical requirements, including a sensitivity of 0.1 mg, a capacity of at least 420 g, and a data acquisition rate greater than 120 Hz. The modules must be compatible with existing laboratory equipment and data acquisition systems. The scope of work includes a one-time supply acquisition along with installation, configuration, training, and warranty support. Performance and delivery will take place at the NIEHS Warehouse in Research Triangle Park, North Carolina. This unrestricted solicitation is not set aside for small business and falls under NAICS code 334516. Award will be based on the lowest price technically acceptable (LPTA) criteria, though the government may select a higher-priced quote if it offers lower performance risk or additional technical merit. The government maintains a unilateral option to extend performance for up to six months. Interested vendors must submit their quotes by September 24, 2026, including detailed pricing, product specifications, and required representations and certifications. Local vendor support is requested to facilitate ongoing maintenance and troubleshooting.

National Institutes Of Health Olao

POSTED

about 22 hours ago

DEADLINE

Ultra Highspeed Megapixel CMOS Imaging Camera

Solicitation # NINDS09426

The National Institutes of Health, under the Department of Health and Human Services, is acquiring a Phantom Veo 1310L ultra high speed megapixel CMOS imaging camera from Vision Research Inc. This specialized equipment will be utilized by the Cellular Neurophysiology Section at the National Institute of Neurological Disorders and Stroke to study neural circuitry in animal models of Parkinson's Disease. The camera is essential for voltage imaging using fluorescent indicators, allowing researchers to monitor large populations of neurons simultaneously at frame rates of 10 kilohertz or higher to capture action potentials occurring at 1 millisecond. The primary objective of this research is to identify physiological and genetic markers in dopamine neurons to understand their vulnerability in Parkinson's disease and how synaptic connections control their activity. This acquisition, identified by solicitation number NINDS09426, is categorized under NAICS code 334516. The project will be performed in Bethesda, Maryland, with the goal of maximizing signal to noise ratios through the camera's low pixel noise and high sensitivity to low light levels.

National Institutes Of Health

POSTED

about 22 hours ago

DEADLINE

More opportunities from State of Idaho

Same awarding agency

ISDA HAZARDOUS WASTE REMOVAL - BOISE AND TWIN FALLS

Solicitation # 1436

POSTED

about 10 hours ago

DEADLINE

Medical Cabinet Physical InstallationThis subcontract involves the physical installation of a medication dispensing cabinet at the GA-C facility for the State of Idaho Department of Health and Welfare. The scope of work includes unpacking, positioning, and securing the cabinet using mounting hardware, as well as performing the initial power-up. The successful contractor must obtain the necessary facility access authorization for GA-C to deliver a fully installed and secured unit. The project is categorized under NAICS code 238990 and was posted on September 15, 2026, with a response deadline of September 18, 2026. This is a subcontracting opportunity managed by the State of Idaho.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 13 hours

Pharmacy System VPN IntegrationThe Pharmacy System VPN Integration subcontract involves the technical configuration and interfacing of a medication dispensing unit for prime contractors working on State of Idaho Department of Health and Welfare projects. The primary objective is to establish secure VPN connections that synchronize inventory, access logs, and controls between the new hardware and existing pharmacy companion software. All work must strictly adhere to State of Idaho network security standards and HIPAA regulations to ensure a synchronized and secure networked system. This project falls under NAICS code 541513 and was posted on September 15, 2026, with a response deadline of September 18, 2026.

Computer Facilities Management Services

POSTED

DEADLINE

in about 13 hours

TouchPoint Medical Dispensing System SupplyThis subcontract agreement involves the supply of one TouchPoint Medical TPM-C-30083 secured electronic medication dispensing and storage cabinet system for the State of Idaho Department of Health and Welfare. The selected provider is responsible for the manufacture and delivery of the unit to the GA-C facility, ensuring the system is delivered and verified. To maintain system compatibility and warranty validity, the provider must hold factory-authorized status. The contract is categorized under NAICS code 423450 and was posted on September 15, 2026, with a response deadline of September 18, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

in about 13 hours

Supply of Retro-Reflective Glass BeadsThis subcontract with the State of Idaho involves the supply of high-performance retro-reflective glass beads for prime contractors working on Idaho Transportation Department roadway marking projects. The materials must strictly adhere to AASHTO Standard M-247 Type 1 to guarantee the necessary skid resistance and retro-reflectivity standards for road safety. The contract focuses on the delivery of bulk quantities of compliant glass beads under NAICS code 322299. Interested parties must submit their responses by the deadline of October 13, 2026, following the posting date of September 15, 2026.

All Other Converted Paper Product Manufacturing

POSTED

DEADLINE

Supply of 125 mil Thermoplastic Roadway MarkingsThis subcontract with the State of Idaho involves the manufacture and supply of 125 mil thermoplastic materials for roadway markings used by prime contractors on Idaho Transportation Department projects. The scope includes the provision of Category I, II, and III materials that adhere to AASHTO Standard M-249, as well as the delivery of associated glass beads compliant with AASHTO Standard M-247 Type 1. The contractor is responsible for delivering all marking materials and providing necessary documentation to establish functional equivalence for any brand alternatives used. The solicitation was posted on September 15, 2026, with a response deadline of October 13, 2026, falling under NAICS code 339943.

Marking Device Manufacturing

POSTED

DEADLINE

THERMOPLASTICS FOR ROADWAY MARKINGS

Solicitation # 1392

The State of Idaho, on behalf of the Idaho Transportation Department, is soliciting bids under ITB 1392 for the provision of various thermoplastics for roadway markings on an as-needed basis. These materials are used to guide, warn, and regulate roadway users across the state's infrastructure, including 12 ports of entry and 29 rest areas. The contract will be awarded to the responsive and responsible bidder offering the lowest total evaluated cost across all categories specified in the pricing schedule. The initial contract term is two years, and all deliveries must be made on an FOB destination freight prepaid and allowed basis to various ITD District locations. Bidders must adhere to strict technical specifications, including AASHTO Standard M-249 for thermoplastic materials and AASHTO Standard M-247 for glass beads, while meeting specific retro-reflectivity and skid resistance standards. Mandatory submission requirements include a completed Submittal Form A for certifications and a detailed pricing matrix in Submittal Form B. Contractors are required to maintain specific insurance coverages, including Commercial General Liability and Workers Compensation, and must name the State as an additional insured. Invoices must be submitted within 30 calendar days of delivery, and the contract is governed by the laws of the state of Idaho.

Paint and Coating Manufacturing

POSTED

DEADLINE

Facility Sanitation & Hygiene ServicesThis subcontract for Facility Sanitation and Hygiene Services involves providing professional cleaning and sanitation for prime contractors working on Idaho Department of Correction Community Reentry Center projects. The scope of work includes janitorial services and deep cleaning to ensure living facilities are sanitized and compliant with established health and sanitation standards. The opportunity is issued by the State of Idaho under NAICS code 561720. It was posted on September 14, 2026, with a response deadline of September 30, 2026.

Janitorial Services

POSTED

DEADLINE

Telecommunications ServicesThis subcontract for the State of Idaho involves providing telecommunications services for prime contractors working on Idaho Department of Correction Community Reentry Center projects. The selected provider is responsible for the installation of phone systems and the ongoing management of billing and usage expectations to ensure residents have access to a functional telecommunications system. The opportunity is categorized under NAICS code 517919 and was posted on September 14, 2026, with a response deadline of September 30, 2026. Interested parties must coordinate through the specified state procurement portal to submit their responses for this service contract.

All Other Telecommunications

POSTED

DEADLINE

Resident Financial & Banking ServicesThis subcontract for Resident Financial and Banking Services supports prime contractors operating within Idaho Department of Correction Community Reentry Center projects. The selected provider will be responsible for delivering a comprehensive financial account management system to handle resident funds, facilitate basic banking access, and execute necessary transaction processing. The opportunity is issued by the State of Idaho under NAICS code 522110. Interested parties must submit their responses by the deadline of September 30, 2026.

Commercial Banking

POSTED

DEADLINE

Commercial Laundry & Linen ServicesThis subcontract opportunity with the State of Idaho involves providing commercial laundry and linen services for prime contractors operating within Idaho Department of Correction Community Reentry Center projects. The selected provider will be responsible for the collection, cleaning, and delivery of resident clothing, bedding, and linens according to a recurring schedule. The solicitation is categorized under NAICS code 812331 and was posted on September 14, 2026. Interested parties must submit their responses by the deadline of September 30, 2026.

POSTED

DEADLINE

Facility IT & Network InfrastructureThis subcontract opportunity with the State of Idaho focuses on the provision and maintenance of secure IT systems and network infrastructure for prime contractors working on Idaho Department of Correction Community Reentry Center projects. The scope of work includes the installation of secure networks, hardware deployment, and ongoing infrastructure maintenance to ensure the delivery of a fully operational and secure IT network. The project falls under NAICS code 541512 and was posted on September 14, 2026. Interested parties must submit their responses by the deadline of September 30, 2026.

Computer Systems Design Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS