Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

SSB NCAO SH PP SPARE TURBOTRON UNITS

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled "SSB NCAO SH PP SPARE TURBOTRON UNITS," identified by solicitation number AGBOR2002765, is a forecast opportunity issued by the Bureau of Reclamation under the Department of the Interior. It involves the procurement of spare Turbotron units related to SH-PP-U1 and U2 systems. The contract falls under the NAICS code 333611, which pertains to turbine and turbine generator manufacturing. While the specific location details for the place of performance and office address are not provided, the contract is intended to support ongoing or future operational needs within the Bureau of Reclamation. Key contacts for the contract include Nandini Johnson, serving as the primary point of contact, and Paul A. Hendree, designated as the Small Business Specialist. Details regarding set-aside status are yet to be determined. Interested parties are encouraged to reach out via the provided emails or visit the acquisition gateway link for additional information. The forecast indicates that the contract is anticipated to support maintenance or upgrades requiring Turbotron spare units, essential for the continued functionality of relevant infrastructure.

General Info

Procurement of spare Turbotron units for SH-PP-U1 and U2 under Bureau of Reclamation.

Agency

Department of the Interior → Bureau of Reclamation

NAICS

333611 - Turbine and Turbine Generator Set Units ManufacturingView NAICS

Place of Performance

CA, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJan 8

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment of the Interior → Bureau of Reclamation

Contacts2 people available

OfficeN/A

Organization / Agency

Department of the Interior → Bureau of Reclamation

Office AddressN/A

Contacts

Nandini Johnson

contact@example.gov

Paul A. Hendree

contact@example.gov

Full Description

Show more

SH-PP-U1 and U2 AND SPARE TURBOTRON UNITS. 34377

Similar Contracts

Same NAICS industry code

28--VALVE,PILOT GOVERNORThe U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for one unit of NSN 2825012149012, a Valve, Pilot Governor, to be delivered to W1A8 DLA Distribution. The requirement is issued as a Request for Quote under solicitation number SPE7L526T4627, with responses due by August 6, 2026. Only electronic submissions are accepted, and hard copies of the solicitation are not available. Approved sources for this item are limited to 0BR59 916395, 8FGX3 916395, and 8FGX3 T916395. All responsible suppliers may submit a quote provided it is received on time, though no specifications, plans, or drawings are provided. The North American Industry Classification System code is 333611, indicating the procurement falls under internal combustion engine and engine parts manufacturing. The award will be made to the most responsive and responsible offeror, with delivery expected within 165 days after contract award. Primary inquiries must be directed via email to DibbsBSM@dla.mil, and the full solicitation can be accessed online through the SAM.gov portal using the provided UI link.

DLA Land And Maritime

POSTED

about 13 hours ago

DEADLINE

RING, PISTONThe contract pertains to the procurement of four CRIMPED EXPANDER RING PISTON RINGS with NSN 2825-01-325-6804 under solicitation SPE7L1-26-T-7858, issued by the Department of Defense through the Land Supply Chain. Delivery is required within 20 days of award, and the purchase request number is 7014948238. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Government identification must be removed from non-accepted supplies in accordance with RQ011. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026, and performance is to occur at FPO, ZIP 09564. Point of contact is Kristina Derry, reachable via email and phone provided, and details are accessible through the DIBBS portal.

LAND SUPPLY CHAIN

POSTED

DEADLINE

SEAL RING, EXHAUSTThe contract solicits a SEAL RING, EXHAUST with part number 759J037-41, manufactured by Northrop Grumman Systems Corporation, identified by NSN 2825-00-296-0801, for a quantity of two AY units under solicitation SPE4A6-26-T-06YD. This is a total small business set-aside under NAICS code 333611, with a requirement that all offerings must be produced using conventional manufacturing methods—additive manufacturing is expressly prohibited and disqualifies offers. The item is designated as a critical application item, subject to stringent quality and technical requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements, with all attributes assigned verification levels or AQLs as per MIL-STD-1916 or comparable zero-based sampling plans. Inspections and acceptance occur at the destination under FAR 52.246-2, with sampling requirements mandating zero non-conformances for acceptance unless otherwise specified. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must adhere to DLA packaging guidelines. Delivery is FOB origin with a 140-day delivery window following order receipt, to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, by June 9, 2026, with an original delivery deadline of December 26, 2026. The contractor must comply with extensive cybersecurity and compliance obligations, including CMMC Level 2 self-assessment, safeguarding covered defense information per FAR 252.204-7012, and adherence to NIST SP 800-171 DOD assessment requirements. Prohibitions on hazardous materials are strict: mercury and mercury compounds are forbidden except in specific exempted applications such as certain batteries or sensors, with portable mercury-containing devices requiring shockproof construction and secondary containment in line with NAVSEA standards. Hexavalent chromium is banned, and all hazardous materials must be labeled in accordance with the Hazard Communication Standard unless covered by other federal statutes. The contractor is required to maintain current representations in SAM, certify small business status, and comply with whistleblower protections, anti-trafficking, and employment verification mandates. Payment must be processed through Wide Area Workflow with electronic invoicing and receiving

ASC COMMODITIES DIVISION

POSTED

DEADLINE

40HP Surface Drive Outboard Motor SupplyThe contract requires the supply of a new, commercially available 40HP surface drive outboard motor designed specifically for shallow-water mud boat operations, ensuring suitability for demanding environments where traditional propeller systems are ineffective. The motor must be an OEM product with full manufacturer warranty and accompanying documentation to verify authenticity, performance specifications, and compliance with operational standards. It is intended for integration into a custom-built aluminum boat, necessitating compatibility with the vessel’s mounting system, fuel delivery, and control interfaces without requiring major modifications. This is a subcontract under the agency jurisdiction of the Texas Parks and Wildlife Department, with a posting date of July 24, 2026, and a response deadline of August 7, 2026. The North American Industry Classification System code 333611 confirms the scope as related to boat building and repair. The motor must be delivered and ready for immediate installation, with all necessary technical and warranty materials provided in a format acceptable for federal and state procurement compliance. Performance is expected to meet or exceed industry standards for durability, fuel efficiency, and reliability in muddy, high-obstacle water conditions, and all components must be new, unmodified, and sourced from a recognized and reputable manufacturer.

Parks and Wildlife Department

POSTED

DEADLINE

40HP Surface Drive Outboard Motor SupplyThe contract calls for the supply of three new 40HP surface drive outboard motors specifically engineered for shallow water operations, with full compatibility required for designated aluminum mud boats. These motors must be fully operational upon delivery and meet all technical specifications necessary for reliable performance in demanding aquatic environments, particularly where traditional propeller-driven systems are unsuitable. The equipment is intended for use by the Texas Parks and Wildlife Department, supporting their operational needs in coastal, marsh, and low-depth water areas where maneuverability and minimal draft are critical. The solicitation is classified as a subcontract under NAICS code 333611, with a response deadline of August 7, 2026, at 8:00 PM CT. The contract was posted on July 24, 2026, and is available through the Texas SmartBuy portal, indicating it is procured under a state-level procurement system. While no set-aside designation or point of contact is provided, the place of performance and agency details confirm the motors will be utilized within Texas for public land and water resource management activities. All bids must meet the functional and performance criteria outlined to ensure seamless integration with existing aluminum mud boat fleets.

Parks and Wildlife Department

POSTED

DEADLINE

J059--Preventative Maintenance-Emergency Generators | Follow on Base+4 | Start: 9/30/26This contract is a 100% Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside under NAICS code 333611 for preventive maintenance services on emergency and standby generators at the Chillicothe VA Medical Center in Ohio. The base performance period spans one year from September 30, 2026, through September 29, 2027, with four additional one-year option periods that may be exercised at the government’s discretion. The scope of work requires the contractor to perform annual and semi-annual maintenance on 10 emergency generators, three standby generators, and three mobile generators, including annual load banking, oil and fuel sampling, and compliance with all applicable OSHA and NFPA codes. All work must adhere to VA security protocols, including obtaining prior authorization from VA police, ensuring personnel are properly identified by project and employer, and restricting unauthorized access to the facility. The contractor is responsible for providing all labor, equipment, materials, and incidentals necessary to fulfill the requirements. A mandatory site visit is scheduled for August 3, 2026, at the Chillicothe VAMC location to allow prospective offerors to familiarize themselves with the facility and equipment. Proposals must be submitted electronically through SAM.gov by the deadline of August 17, 2026, and all offerors must be registered and verified in both SAM.gov and VetCert.gov with active, accurate, and unexpired registrations prior to submission. The solicitation is administered by the Department of Veterans Affairs, specifically the 250-NETWORK Contract Office 10, with Stanley Burdine as the Contracting Officer and Cody Brown as a secondary point of contact for site visit coordination. The contract utilizes FAR clause 52.212-4 for commercial item terms and conditions, and all amendments will be posted exclusively on SAM.gov, placing full responsibility on offerors to monitor for updates. No contract value is specified, and evaluation factors or pricing details are not provided in the documentation.

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

Centrifugal Pump Parts Kit SupplyThe contract requires the supply and delivery of five units of a centrifugal pump parts kit that meets all federal standards for packaging, labeling, and shipping. The solicitation is issued under the NAICS code 333611 for pump and pumping equipment manufacturing and is classified as a subcontract under the Department of Defense’s Maritime Supply Chain organization. Responses must be submitted by August 3, 2026, with the requirement posted on July 23, 2026. The parts kit must be delivered to a specified performance location in New Cumberland, Pennsylvania, with zip code 17070-5002. All items must comply with federal regulations to ensure safe handling, proper identification, and authorized transport through government logistics channels. The contract is accessible via the DIBBS portal for further details and submission instructions.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

SEAL RING ASSEMBLY,The contract pertains to the supply of one SEAL RING ASSEMBLY with NSN 2825-01-062-9323 and part number 1388F01H02, manufactured to meet Northrop Grumman Systems Corporation’s technical drawing revision A dated 02/20/1975. Delivery is required within 601 days from the contract date, with shipment FOB origin and final inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The item is classified as a critical application part and must conform to stringent packaging, preservation, and marking standards outlined in MIL-STD-2073-1E and MIL-STD-129. Labyrinth packing rings or dirt and oil deflectors must be immediately preserved with P-2 preservative per MIL-C-16173 Grade 2 upon cleaning and drying, with ferrous components only requiring treatment. Each segment must be individually bagged with quarter-inch thick cushioning per PPP-C-850 Type II Class 1, separated by ASTM D4727 fiberboard, and enclosed in a unit container padded with at least one inch of approved cushioning material. Sets under 40 pounds may be packaged in ASTM D5118 fiberboard boxes, while those 40 pounds or more require overseas-style wood boxes per ASTM D6251 or PPP-B-621, secured with flat steel strapping conforming to ASTM D3953 Finish C. Mercury and mercury-containing compounds are strictly prohibited unless specifically exempted for functional components like batteries, lights, or sensors as defined by NAVSEA, with portable devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified. All packaging must meet DLA’s procurement requirements, and item marking must comply with MIL-STD-129 without unique identification, as per DFARS 252.211-7003(c)(1)(i). The solicitation number is SPE4A6-26-T-09JD, with responses due by July 31, 2026, and the primary point of contact is Charleen Weber at DLA.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

SEAL RING, INLETThis contract is for the procurement of a SEAL RING, INLET with NSN 2825-00-296-0741 and part number 759J037A35, supplied by NORTHROP GRUMMAN SYSTEMS CORPORATION, under solicitation SPE4A6-26-T-06UB. The requirement is for four units to be delivered FOB DESTINATION to the DLA Distribution facility in New Cumberland, Pennsylvania, with a delivery window of 372 days from the order date, targeting a ship date of July 31, 2027. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Item-level identification is not mandated under DFARS 252.211-7003, but physical bare item marking per RQ017 is required. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion; critical, major, and minor attributes must be verified at levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Mercury and mercury-containing compounds are strictly prohibited from contacting the hardware unless used in exempted applications such as batteries, sensors, or instruments under NAVSEA 5100-003D, which requires shock-proof design and a secondary containment barrier. The item is classified as a critical application item and must comply with all applicable technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. The contractor must implement a CMMC Level 2 Self-Assessment for cybersecurity compliance and adhere to DFARS 252.204-7012 for safeguarding covered defense information and reporting cyber incidents. The contract includes multiple FAR and DFARS clauses governing equal opportunity, trafficking in persons, employment verification, sustainable products, hazardous material safety, inspection at destination, contract type, small business representation, subcontracting, and prohibitions on covered telecommunications equipment and unauthorized obligations. Payment is to be processed through WAWF, and all invoices for this fixed-price item must be submitted with an invoice and receiving report. The contract prohibits the use of mandated arbitration agreements and requires compliance with hazard communication standards under DFARS 2

ASC COMMODITIES DIVISION

POSTED

DEADLINE

RETAINING RING, GLANThe contract is for the procurement of two retaining rings, gland, exhaust, identified by NSN 2825-01-096-3595, under solicitation SPE4A6-26-T-06UX, issued as a total small business set-aside under FAR 19.5. Delivery is due within 170 days of contract award, with FOB origin delivery to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is classified as a commercial item with no shelf life requirement, and Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). The contract mandates strict adherence to DLA packaging standards (RP001), MIL-STD-2073-1E for preservation and packaging, and MIL-STD-129 for marking, with no special marking required. Sampling for acceptance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Manufactured items must comply with QA Provision 140A dated March 1, 1983, and quality requirements outlined in the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the hardware except for approved exemptions like batteries, fluorescent lamps, sensors, or weapon systems, with portable mercury-containing devices requiring shockproof design and secondary containment as per NAVSEA 5100-003D. Inspection and acceptance are to occur at origin, with the Government retaining full right to verify compliance before delivery. Transportation and shipping are governed by DLA procedural notes, and invoicing must be submitted electronically through WAWF. Contractors must comply with all applicable FAR and DFARS clauses including those on employment equity, trafficking in persons, cybersecurity safeguards, subcontracting for commercial items, and protection of covered defense information. The contract includes clauses for changes, termination, payment acceleration to small business subcontractors, and prohibition of certain internal confidentiality agreements. Pricing is listed as $2.00 total for two units, though the unit price of $0.000 suggests placeholder data; the contract value remains unverified due to inconsistent or incomplete financial information. All

ASC COMMODITIES DIVISION

POSTED

DEADLINE

28--NOZZLE ASSEMBLY,TURThe contract pertains to the procurement of 29 units of a 28-Nozzle Assembly, Turbine, identified by NSN 0R-2840-017000351-B8 and reference number 5154T29G03, with delivery terms set at FOB Origin. This component is classified as a Critical Safety Item, underscoring its essential role in operational safety and system integrity. The part’s design is currently unstable, with engineering, manufacturing, and performance characteristics failing to meet required objectives. Ongoing testing and service use have revealed marginal performance and low process yield, prompting plans for significant design revisions that will render the current configuration obsolete. Limited procurement and repair of existing units are permitted only until the revised design is implemented and approved. The solicitation, numbered SPRPA126RYC77, was posted on July 23, 2026, with a response deadline of August 17, 2026, and is flagged as a presolicitation, indicating preparatory activity prior to a formal acquisition process. The contracting office is the Department of Defense, specifically the Defense Logistics Agency Aviation based in Philadelphia, Pennsylvania. Primary point of contact for inquiries is Kenneth Lauber, reachable via email at KENNETH.LAUBER@DLA.MIL, with phone and fax details provided. No specific place of performance or set-aside classification is designated, and the NAICS code is not listed. The nature of the item and its safety-critical status necessitate urgent attention to design stability and transition planning.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

28--SEAL RING ASSEMBLY,The contract solicits one SEAL RING ASSEMBLY with NSN 2825010629323 for delivery to DLA Distribution at W1A8 within 601 days of award, with an approved source listed as 90099 1388F01H02. The procurement is conducted via a Request for Quotation (RFQ) issued under solicitation number SPE4A626T09JD, with no hard copies available—quotes must be submitted electronically through the SAM.gov portal. The solicitation is open to all responsible sources, and no specifications, plans, or drawings are provided, placing full responsibility on offerors to meet requirements based on the NSN and approved source. The posting date is July 23, 2026, with a response deadline of July 31, 2026, and the solicitation falls under NAICS code 333611 for engine and turbine manufacturing. The contracting office is DLA Aviation based in Richmond, Virginia, and all questions must be directed via email to DibbsBSM@dla.mil, with additional details accessible through the provided SAM.gov link or DIBBS website.

POSTED

DEADLINE