Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Stainless Steel Anchors and Fastener Supply

Active

Federal

Response Deadline09/14/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the Department of Defense through the US Army Engineer District Walla Walla, involves the supply of corrosion-resistant anchors and fasteners for prime contractors working on the USACE Lower Monumental Dam projects in Kahlotus, Washington. The scope of work requires the delivery of 250 3/4 inch ASTM Type 316 Stainless Steel undercut anchors, 30 hex head bolts, and 1,000 hot dipped galvanized steel G-Clip grating fasteners. All supplied materials must strictly comply with ASTM F468 and F467 standards, and the provider is required to submit Certified Mill Test Reports. This opportunity is designated as a Total Small Business Set Aside under NAICS code 331111, with a response deadline of September 14, 2026.

General Info

DoD subcontract for corrosion-resistant anchors and fasteners for Lower Monumental Dam projects.

Agency

Department Of Defense → US Army Engineer District Walla WalView Agency

NAICS

331111 - Iron and Steel MillsView NAICS

Place of Performance

Kahlotus, WA, 99335, USA

Set-Aside

SBA

Documents

This scope was carved out of W912EF26QA079.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Lower Monumental Dam Diffuser Grating

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 1

subcontract

Response DeadlineSep 14

Submission deadline

Response Deadline

09/14/2026, 10:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → US Army Engineer District Walla Wal

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → US Army Engineer District Walla Wal

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies corrosion-resistant anchors and fasteners for prime contractors on USACE Lower Monumental Dam projects. Provides 3/4" ASTM Type 316 Stainless Steel undercut anchors, hex head bolts, and hot dipped galvanized steel G-Clip grating fasteners. Must comply with ASTM F468 and F467 and provide Certified Mill Test Reports. Delivers 250 anchors, 30 bolts, and 1,000 G-Clips.

Similar Contracts

Same NAICS industry code

Supply of Structural Aluminum Plate (AI)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Raw Materials for Container Fabrication

Defense Logistics Agency

POSTED

DEADLINE

Supply of Raw Materials and Steel Fabrication InputsThe contract centers on the supply of DFARS-compliant raw materials essential for the fabrication of military containers and components, including steel plate, fasteners, and specialized coatings. These materials must meet stringent defense regulatory standards to ensure traceability, origin compliance, and quality assurance throughout the supply chain. The work is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the North American Industry Classification System code 331111 indicating primary focus on steel mill production and related inputs. All materials are intended for use in defense-related fabrication projects, necessitating strict adherence to the Defense Federal Acquisition Regulation Supplement throughout sourcing, processing, and delivery. The contract was posted on August 4, 2026, and while the exact location of performance is unspecified, delivery is expected to support defense manufacturing operations across the United States. The subcontractor is responsible for maintaining full DFARS compliance, documenting material origins, and ensuring all products meet technical and regulatory requirements without exception. The award is linked to a specific delivery order under contract SPE8ED26F0167, which references the broader acquisition vehicle SPE8ED25D0003, indicating a pre-qualified procurement framework managed through the DLA’s DIBBS system. Failure to comply with material sourcing rules could result in contract termination or penalties due to the critical nature of the components involved.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Aerospace-Grade Material Supply – Superalloy Blanks or ForgingsThis subcontract with the Defense Logistics Agency under the Department of Defense involves the procurement of aerospace-grade nickel-based superalloy forgings or bar stock, such as Inconel 718. These materials are specifically intended for machining into turbine shroud segments, requiring strict adherence to aerospace certification standards and full material traceability. The contract is categorized under NAICS code 331111 for iron and steel forging and shipbuilding. It was posted on July 21, 2026, and is managed through the DLA's procurement systems to ensure the supply of high-performance materials necessary for critical aerospace components.

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

Aerospace-Grade Sheet Metal SupplyThe contract entails the supply of aerospace-grade aluminum or steel sheet metal that complies with military specifications for use in fabricating duct assemblies, ensuring mechanical integrity, durability, and performance under extreme operating conditions. The materials must meet exacting standards for composition, thickness, surface finish, and structural properties as defined by applicable defense requirements, and the subcontractor is expected to deliver consistent quality across all lots, with rigorous documentation to verify compliance. Issued by the Defense Logistics Agency under the Department of Defense, this subcontract is tied to NAICS code 331111, indicating it falls under primary metal manufacturing. The contract was posted on July 21, 2026, and is linked to the award identification SPE4A726P6714 through the DIBBS system. Performance locations and point of contact details are unspecified, but the materials will be utilized in defense-related aerospace applications, requiring adherence to strict chain-of-custody and traceability protocols. No set-aside provisions are indicated, meaning the solicitation is open to all qualified suppliers regardless of business size or ownership classification.

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

Material Supply for Austenitic Gray Iron (NI-Resist) CastingsThe contract specifies the supply of certified NI-Resist Austenitic Gray Iron castings conforming to ASTM A436, intended for use in the manufacturing of butterfly valves within defense-related applications. All materials must meet stringent quality requirements and carry full traceability through every stage of production, from raw material sourcing to final delivery, ensuring compliance with strict military and industrial standards. The material is required to be sourced in accordance with DFARS regulations, mandating origin and supply chain transparency to support national security objectives and prohibit the use of non-compliant foreign inputs. This subcontract is issued under the Defense Logistics Agency, part of the Department of Defense, and is classified under NAICS code 331111 for iron and steel mills and ferroalloy manufacturing. The product is destined for critical defense applications where material integrity and proven performance under stress are non-negotiable. Although specific delivery locations and point of contact details are not provided, the contract is active as of its posting date in July 2026, and all parties must adhere to the full scope of ASTM A436 specifications including chemical composition limits, mechanical properties, and inspection protocols. Supply chain accountability and documentation integrity are central to fulfilling this obligation.

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

Nickel Alloy Metal Sheet Supply

Defense Logistics Agency

POSTED

DEADLINE

High-Performance Alloy Material Supply

Defense Logistics Agency

POSTED

DEADLINE

Cold-Rolled Steel Sheet Manufacturing and SupplyThe contract pertains to the manufacturing and supply of a single sheet of cold-rolled, annealed carbon steel compliant with SAE AMS5046F and SAE AMS2807C specifications, ensuring strict adherence to material composition, mechanical properties, and surface finish requirements. The product must be produced with precise dimensional tolerances and include full traceability documentation to verify origin, processing history, and conformance to military and aerospace standards. This subcontract, issued under the Defense Logistics Agency within the Department of Defense, falls under NAICS code 331111 for steel mills and ferroalloy manufacturing. The solicitation was posted on June 3, 2026, and the place of performance and point of contact details are unspecified, though the contract is accessible through the DIBBS system via the provided link. The requirement emphasizes quality control and traceability, indicating its critical use in defense or high-reliability applications where material integrity is non-negotiable.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Raw Materials (Steel, Fasteners, Coatings)This subcontract involves the supply of raw materials essential for container fabrication, specifically steel plates, fasteners, and protective coatings. The materials must comply with the Defense Federal Acquisition Regulation Supplement (DFARS), ensuring sourcing and certifications are fully traceable. The contract is designated as a Total Small Business Set-Aside under FAR 19.5, promoting opportunities for qualified small businesses within the relevant industry, classified under NAICS code 331111, which pertains to primary metal manufacturing. The Department of Defense agency responsible for this procurement is DLA Maritime - Puget Sound, with the place of performance identified as Bremerton. Although specific solicitation details such as the solicitation number and detailed office address are not provided, the contract focuses on fulfilling defense-related material needs with a strong emphasis on regulatory compliance and quality assurance. The subcontract was posted in February 2026 and aims to ensure reliable delivery of DFARS-compliant raw materials to support container fabrication projects in defense applications.

DLA Maritime - Puget Sound

POSTED

DEADLINE

More opportunities from Department Of Defense → US Army Engineer District Walla Wal

Same awarding agency

HVAC Troubleshooting, Repair, and Maintenance Services (Blanket Purchase Agreement)

Solicitation # W912EF-26-R-SS34

The US Army Corps of Engineers, Walla Walla District, is conducting a sources-sought announcement to identify capable small businesses for a Blanket Purchase Agreement covering HVAC troubleshooting, repair, and maintenance services. The work spans Idaho, Oregon, and Washington, encompassing a wide range of equipment from small wall-mounted PTAC units to large 1,500-ton industrial water-sourced heat pumps. This opportunity falls under NAICS code 238220, with a small business size standard of 19 million dollars in average annual receipts. Interested firms must submit comprehensive qualifications to be considered for the potential set-aside, including a history of similar projects, reference lists, business size certification, CAGE code, and UEI. Applicants must also provide detailed responses regarding their core competencies, OEM certifications, subcontractor vetting processes, emergency response times, and preferred pricing structures. All responses must be submitted to the contracting officer by September 18, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

HVAC Equipment Supplier

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

DEADLINE

Industrial Coating Specialist

Painting and Wall Covering Contractors

POSTED

DEADLINE

Demolition and Environmental Remediation Contractor

Remediation Services

POSTED

DEADLINE

Electrical Contractor

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

HVAC Controls and Automation Specialist

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

HVAC Mechanical Contractor

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Lower Monumental PH HVAC System Upgrade

Solicitation # W912EF26RA007

The Lower Monumental Dam Powerhouse HVAC System Upgrade project, solicitation W912EF26RA007, is a single firm-fixed price construction contract issued by the US Army Engineer District Walla Walla. Located in Kahlotus, Washington, the project is an unrestricted procurement open to both large and small business concerns under NAICS code 238220. The award will be based on the Lowest Price Technically Acceptable (LPTA) criteria. Requirements include 100 percent performance and payment bonds, registration in the System for Award Management, and a small business subcontracting plan for large businesses. The scope of work involves modernizing the powerhouse HVAC system to provide ventilation, heating, and cooling using river water as the primary source. Key objectives include improving indoor air quality, ensuring efficient powerhouse pressurization to reduce smoke and dust ingress, and providing specialized pressurization for the control room and stairwells to exclude smoke during fire events. The project includes upgrading to a modern electronic control system operable from the control room and installing permanent access platforms for maintenance. The contractor must implement a comprehensive Contractor Quality Control (CQC) System, managed by an on-site manager with at least five years of relevant experience and specific certification in Construction Quality Management for Contractors. Proposals are due by September 22, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Neoprene Isolation Pad SupplyThis small business set-aside subcontract with the US Army Engineer District Walla Walla involves the supply of industrial-grade elastomer isolation pads and bolt isolation kits for prime contractors working on USACE Lower Monumental Dam projects in Kahlotus, Washington. The contract requires the delivery of 10 isolation pads made from 100% Virgin Chloroprene and 250 bolt isolation kits featuring ASTM B209 6061-T6 alloy washers. All materials must adhere to strict technical specifications, including a Shore A Durometer of 60 plus or minus 5 per ASTM D2240 and a tensile strength of 2500 psi per ASTM D412. The opportunity was posted on September 1, 2026, with a response deadline of September 14, 2026, under NAICS code 326191.

Plastics Plumbing Fixture Manufacturing

POSTED

DEADLINE

Aluminum Diffuser Grating and Structural Components SupplyThis subcontract involves the fabrication and supply of aluminum structural members and grating for prime contractors working on USACE Lower Monumental Dam projects in Kahlotus, Washington. The scope of work includes the production of 15-SG-4 grating, 6061-T6 I-beams, and angle sections, adhering to ANSI MBG 531-00 and ASTM F626 standards. The contractor must utilize 6061-T6 and 6063-T6 aluminum alloys and provide Certified Mill Test Reports for all materials. The final delivery consists of 52 grating units, 12 I-beams, and 10 angle sections, which are to be offloaded at LMA. This opportunity is designated as a total Small Business Set Aside under NAICS code 332312 and is managed by the US Army Engineer District Walla Walla within the Department of Defense.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Commercial Zero Turn Mower Supply

Hardware Stores

POSTED

DEADLINE

Notice of Intent to Award Single Source - Washington State Patrol Telecommunications Dispatch Services

Solicitation # W912EF26QA077

The U.S. Army Corps of Engineers Walla Walla District is issuing a special notice of intent to solicit and negotiate a single source contract with the Washington State Patrol for Telecommunications Dispatch Services. This procurement, identified by solicitation number W912EF26QA077 and NAICS code 922120 for Police Protection, is being conducted under Simplified Acquisition Procedures. The decision to bypass full and open competition is based on a class justification and approval pursuant to 10 U.S.C.2304(c)(5) or 41 U.S.C.3304(a)(5), as the government has determined that the Washington State Patrol is the only reasonable available source for these specific services within the district's jurisdiction. This action is supported by a class-based justification for law enforcement services covering fiscal years 2022 through 2027. While this notice is primarily for informational purposes and is not a formal solicitation, interested parties may submit written evidence of their capabilities to Gregory Moyer by 11:00 AM Pacific Time on September 17, 2026. Any such responses must provide compelling evidence that competition would be advantageous to the government. The final determination regarding whether to proceed with a sole-source award or a competitive procurement remains at the sole discretion of the government.

Police Protection

POSTED

DEADLINE