This Government Contract opportunity from Tennessee was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Stainless Steel Cable Hanger Manufacturing

Closed

State & Local

Submission Closed07/21/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332322

New

DIBBS

Precision Machining and Fabrication of Howitzer Carriage ComponentsThe contract requires the manufacture of high-strength, precision-machined components for howitzer carriages, aligned with military standards MIL-DTL-64159 and MIL-DTL-53039F, encompassing critical processes such as welding, heat treatment, and strict dimensional tolerancing to ensure operational reliability under combat conditions. All work must be performed to exacting specifications to meet the performance and durability demands of artillery systems, with final products subject to rigorous quality inspection and compliance verification. This is a subcontract opportunity issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance required at a facility in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by August 3, 2026, with the NAICS code 332322 indicating classification under other forging and stamping operations. Interested parties must ensure full alignment with defense manufacturing requirements and be prepared to demonstrate capability in meeting stringent military specifications without deviation.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Precision Machining and Fabrication of Shroud AssemblyThe contract requires the precise manufacturing and fabrication of a shroud assembly according to engineering drawing 008299365, encompassing all stages from material selection and forming to machining and final dimensional verification. The work demands high accuracy and adherence to specified technical standards, with quality control integrated throughout each phase to ensure compliance with the engineered requirements. All components must be produced using approved methods and materials to meet performance and durability expectations for the intended application. This is a total small business set-aside subcontract under NAICS code 332322, reserved exclusively for small businesses as defined by the SBA. It is issued by the Department of Defense, specifically through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 24, 2026. The solicitation was posted on July 23, 2026, and the place of performance is not specified, indicating flexibility in location as long as deliverables meet contractual obligations. Bidders must be certified small businesses eligible under the FAR 19.5 regulations, and all submissions must align with the technical specifications outlined in the referenced engineering drawing.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Metal Fabrication of Loop ClampsThe contract seeks the manufacture of precision loop clamp hardware identified by NSN 5340-00-286-9418, requiring strict adherence to SAE AS21919D specifications and applicable military inspection standards. This is a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 332322 classifying the work as other fabricated metal product manufacturing. The solicitation was posted on July 23, 2026, and responses are due by July 28, 2026, with performance obligations tied to the Department of Defense's Maritime Supply Chain. All work must be conducted in compliance with federal acquisition regulations and quality assurance protocols governing defense-related hardware.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Precision Sheet Metal Fabrication for HVAC Duct AssembliesThe contract calls for the manufacture of precision-engineered duct assemblies designed for military heating, ventilation, and air conditioning systems, requiring strict adherence to military specifications for durability, dimensional accuracy, and functional fit. The work involves a comprehensive fabrication process including cutting, bending, forming, and welding of sheet metal components to ensure performance under demanding operational conditions. All assemblies must meet defined quality and standards requirements to support critical military infrastructure and equipment functionality. This is a subcontract opportunity under NAICS code 332322, posted on July 23, 2026, with a response deadline of August 26, 2026. The contracting entity is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, and performance is expected to support defense operations without specified geographic limitation. The solicitation is issued through the DIBBS system under reference number SPE4A726R0687, and interested contractors must submit proposals by the stated deadline to be considered for award.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Welding Qualification Test Kit Manufacturing and AssemblyThe contract requires the manufacture, assembly, and quality assurance of 122 units of Welding Qualification Test Kits in full compliance with Department of Defense Logistics Agency standards, including the sourcing of all necessary components and strict adherence to approved technical specifications. All work must be performed in accordance with established quality control protocols to ensure each kit meets the required functional and durability benchmarks for military use. This is a small business set-aside subcontract under the NAICS code 332322, with a response deadline of August 3, 2026, and a performance location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting entity is the DDSP New Cumberland Facility under the Department of Defense, and the procurement is intended exclusively for small business contractors as defined by the Small Business Administration. The contract was posted on July 23, 2026, and all submissions must be completed by the specified deadline to be considered.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Precision Metal Bracket Fabrication (Angle Bracket)The contract calls for the manufacture and delivery of 179 units of an angle bracket designated by NSN 5340-01-333-8483, requiring full fabrication from material sourcing through final packaging and domestic shipping within the continental United States. All work must comply with military specifications, encompassing machining, surface finishing, labeling, and secure packaging to ensure operational readiness and traceability. The effort is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 332322 indicating classification under Other Fabricated Metal Product Manufacturing. The solicitation was posted on July 23, 2026, with responses due by July 28, 2026, and the awarding entity is the Strategic Acquisition Program Directorate under the Department of Defense, though specific performance or contact details are not provided.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

DAMPER, FLUEThe contract is for the procurement of a DAMPER, FLUE with NSN 4520-01-413-0072 and part number 12364429, supplied by BAE SYSTEMS LAND & ARMAMENTS L.P. and AMZ ALABAMA INC., designated as a critical application item. The requirement is for 13 units at a unit price of $13.00, totaling $169.00, with delivery due in 130 days FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods and container types, and marking must adhere to MIL-STD-129 with no special marking requirements. The delivery destination is the DLA Distribution facility in New Cumberland, PA, and transportation follows DLAD procedural notes C19 and C20. The solicitation number is SPE7L4-26-T-5744, issued under DoD procurement rules, and incorporates technical and quality requirements from the DLA Master List. The original required delivery date is May 20, 2027, with a needed ship date of July 27, 2026. The contract falls under NAICS code 332322 and is managed by the Department of Defense’s Combat Vehicles and Armament office, with Anna-Rachelle Betts as the primary point of contact.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

STUD, SELF-LOCKINGThe contract pertains to the procurement of 10 units of a self-locking stud identified by NSN 5307-01-559-2772 and part number 10001334 from CONSOLIDATED METCO INC, Clackamas. Deliveries are required within five days of contract award with FOB origin terms and no variance permitted in quantity. Inspection and acceptance occur at the destination, and all items must be packaged per ASTM D3951 and labeled in strict compliance with MIL-STD-129, with palletization meeting DLA’s RP001 packaging requirements. The DLA Master List of Technical and Quality Requirements supersedes any conflicting standards, and sampling must follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unit of issue is each, and item unique identification is not required per customer request. The material is not hazardous, as confirmed by HMIC review, and no Safety Data Sheet is needed. Shipments must be sent via traceable means, excluding parcel post, to the designated government address in Goose Creek, South Carolina. All packaging and marking must reflect the supplied marking information and reference the TCN W50YF061910015. The required delivery date is July 15, 2026, with solicitation issued under contract SPE4A0-26-T-4047, governed by applicable defense acquisition regulations and technical specifications referenced through the DLA master list.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Fabrication of Aluminum Sign BlanksHillsborough County is soliciting bids for the fabrication of aluminum sign blanks that meet ASTM B-209 and Alodine 1200E specifications, requiring the material to be pre-cut, pre-punched, and chemically treated for corrosion resistance and surface preparation. The contract is structured as a subcontract with a North American Industry Classification System code of 332322, indicating it falls under the manufacturing of fabricated metal product manufacturing, specifically related to sign manufacturing. Bidders must submit responses by August 13, 2026, at 6:00 PM Eastern Time, following the solicitation posted on July 23, 2026. The work is to be performed under the jurisdiction of the Florida state agency, though specific performance location details are not provided. All submissions must comply with the referenced material standards and include complete documentation confirming adherence to the required chemical treatment and fabrication tolerances.

POSTED

DEADLINE

Supply of Sliding Door Units and HardwareThe contract calls for the manufacture and delivery of pre-assembled sliding door units that meet all applicable building codes and standards, including integrated frames, glazing, tracks, seals, and locking mechanisms. The units may be custom-sized or designed to meet energy efficiency requirements, ensuring they are tailored to specific project needs while maintaining compliance and performance. All components must be fully assembled and ready for installation upon delivery, with no on-site fabrication or modification permitted. Performance is required at Sturgeon Bay, Wisconsin, with a response deadline of August 10, 2026, and the solicitation was posted on July 23, 2026. This is a subcontract under the NAICS code 332322, which classifies it within the construction metal product manufacturing sector, and it is issued by the Department of Homeland Security through its Cleveland base office. The delivery schedule, quality controls, and compliance verification procedures are implicitly expected to align with federal procurement standards, though specific technical specifications or quantities are not detailed here.

Base CLEVELAND(00030)

POSTED

DEADLINE

Storm Shelter Fabrication and SupplyThe contract calls for the fabrication and delivery of prefabricated storm shelters designed to meet Department of Defense specifications, with each unit constructed from steel-reinforced concrete or metal materials compliant with FEMA and ICC 500 standards. The shelters must be engineered for durability, impact resistance, and environmental resilience to ensure occupant safety during severe weather events. All units are to be manufactured in accordance with DoD requirements, including dimensional tolerances, material certifications, and testing protocols that align with federal safety codes. Subcontractors are required to deliver the shelters to a designated performance location with ZIP code 73705 by the response deadline of September 2, 2026. The contract falls under NAICS code 332322, indicating it is categorized within the prefabricated metal building manufacturing sector. The award is issued under the FA3029 71 Ftw Cvc organization within the Department of Defense, and full compliance with technical, logistical, and regulatory standards is mandatory. Proposals must demonstrate capacity for large-scale production, quality control, and timely delivery to meet operational deployment schedules.

POSTED

DEADLINE

Metal Fabrication and Finishing (Polished Brass & Structural Frame)The contract calls for the fabrication of a structural frame and surface components in polished brass, specifically including sneeze guards, tray slides, and housing, all built to military-grade standards for durability and finish. The work requires precision manufacturing with attention to both structural integrity and aesthetic finish, ensuring compliance with rigorous defense specifications. All components must meet exacting performance and surface quality benchmarks typical of military applications, with no tolerance for substandard materials or workmanship. This is a total small business set-aside under the SBA program, designated for firms classified as small businesses per FAR 19.5, and falls under NAICS code 332322 for fabricated metal product manufacturing. The contract is structured as a subcontract, issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, part of the Department of Defense. Proposals must be submitted by July 30, 2026, with the solicitation posted on July 23, 2026, and performance is expected to occur at a location determined by the contractor, though no specific place of performance is listed in the data.

Navsup Flt Logistics Ctr Puget Sound

POSTED

2 days ago

DEADLINE

in 5 days

AI Contract Overview

The contract calls for the manufacture of 7/8 inch stainless steel butterfly cable hangers, to be supplied in kits of ten units each, precisely meeting the technical requirements of ANDCORP 42396A-5 or COMMSCOP 42396A-5 standards for outdoor coaxial cable mounting applications. All items must be fabricated from stainless steel to ensure durability and corrosion resistance in outdoor environments, with strict adherence to dimensional, material, and finish specifications to guarantee compatibility and performance in utility installations. This is a subcontract opportunity issued by Nashville Electric Service under NAICS code 332322, with a response deadline of July 21, 2026, at 7:00 PM. The place of performance is listed as Nashville, and the solicitation is accessible through the vendor portal at https://vendor.nespower.com/?bid=Z4805. There is no set-aside designation specified, and the contract is open to qualified manufacturers capable of meeting the exacting standards required for reliable outdoor cable support systems.

General Info

Manufacture 7/8 inch stainless steel cable hangers in kits of ten to ANDCORP/COMMSCOP 42396A-5 standards for Nashville Electric Service.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

332322 - Sheet Metal Work ManufacturingView NAICS

Place of Performance

Nashville, TN, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 16

subcontract

Response DeadlineJul 21

Deadline has passed

Submission Closed

07/21/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTennessee → Nashville Electric Service

ContactsNo contacts available

OfficeN/A

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture of 7/8" stainless steel butterfly cable hangers in kits of 10 units, conforming to exact specifications for ANDCORP 42396A-5 or COMMSCOP 42396A-5 for outdoor coaxial cable mounting.