This Government Contract opportunity from Tennessee was posted on July 6, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Stainless Steel Wedge Anchor Supply

Closed

State & Local

Submission Closed07/13/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312

New

ACE-0620-1199-00 Tower Design and Fabrication for Various RCAG/RTR Sites (TXK-A, GRI-B, and ARG)

Solicitation # ace-0620-1199-00-tower-design-fabrication-various-rcagrtr-sites-txk-gri-b-arg

This solicitation, issued by the Parsons Corporation, seeks a qualified contractor for the design, fabrication, and delivery of towers at various RCAG/RTR sites located in Texas, Nebraska, and Arkansas, specifically TXK-A, GRI-B, and ARG. The selected offeror must be fully bonded and insured to perform the work. This opportunity is categorized under NAICS code 332312 and is set aside for various small business designations, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran Owned Small Businesses. The response deadline for this solicitation is September 25, 2026. Interested parties should coordinate with the primary point of contact, Thomas Sheehan, regarding the submission process and technical requirements. The project focuses on critical infrastructure support across three states to ensure the successful implementation of tower systems at the designated sites.

POSTED

DEADLINE

Structural Beam Manufacturing and SupplyThis subcontract through the Defense Logistics Agency of the Department of Defense involves the manufacture and supply of one structural inner beam, identified by part number 2-195-1-006 and NSN 9520-01-462-2357. The contractor must ensure the component meets all applicable military and ASTM packaging standards to ensure quality and compliance. The project falls under NAICS code 332312 and requires delivery within 30 days of the order. Interested parties had until September 1, 2026, to respond to the solicitation posted on August 26, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Structural Steel Fabrication and ErectionThe Department of Defense, through the Active Devices Division, is seeking a subcontractor for the fabrication and on-site erection of structural steel members intended for buildings or bridges. This project is categorized under NAICS code 332312 and will be performed in Tracy, California. Interested parties must submit their responses by September 8, 2026. The solicitation was officially posted on August 26, 2026, and further details can be accessed via the provided DIBBS link.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Manufacture and Supply of LH STA 379 Inboard Splice AngleThis subcontract involves the manufacture and delivery of 11,000 units of the LH STA 379 Inboard Splice Angle, identified as part number 1560-LN0035460. The contractor must ensure all units meet strict military specifications, including all required material standards, sampling protocols, and packaging requirements. The project is issued by the Department of Defense through the DLA Fleet Readiness Center Southeast under NAICS code 332312. This opportunity is designated as a total small business set-aside per FAR 19.5. Responses are due by September 7, 2026.

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

DEADLINE

Supply of Military-Grade FastenersThis subcontract with the Department of Defense ASC Commodities Division involves the manufacture, quality assurance, and delivery of 25 units of plain slotted hexagon nuts, identified by NSN 5310009436609. The contractor must ensure all items comply with strict military standards regarding marking, packaging, and documentation. The project falls under NAICS code 332312 and will be performed in Huntsville, Alabama. Interested parties must submit their responses by September 3, 2026, following the posting date of August 26, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-Q-1000

This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 16 units of an inlet screen assembly, identified by NSN 1560-01-471-8483. The components must adhere to Bell Helicopter Textron Inc drawings, with Eaton Aerospace LLC listed as the approved source under part numbers 2H6840 and 901-345-541-101. The required delivery timeframe is 180 days after the order is received. Compliance requirements are stringent, necessitating CMMC Level 2 certification via a certified third-party assessment organization. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be shared with foreign nationals without prior authorization. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-02V8

This contract is for the procurement of one knob, identified by NSN 5355001683208 and part number 369A4215-3. The item is designated as a critical application item, with approved sources including Kampi Components Co Inc, The Boeing Company, MD Helicopters Inc, Electronic Hardware Corp, and Lynn Electronics LLC. Delivery is required within 20 days, with the original required delivery date set for August 24, 2026. The shipment is to be delivered FOB Origin to the 160th Aviation HQ HHC Special Operations at Fort Campbell, Kentucky. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. The contract also requires compliance with documentation for source approval requests and the removal of government identification from any non-accepted supplies.

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-339J

Solicitation SPE7M4-26-T-339J is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of four units of Lock Assembly, Crank (NSN 1710-01-208-0412). The requirement is issued under the First Destination Transportation program with delivery to Naval Air Station Lemore, California. Quotations must be submitted via the DLA Internet Bid Board System by August 24, 2026, with a required delivery date of August 17, 2026. The award may be processed via automated award, and a price evaluation preference is available for certified HUBZone small business concerns. This contract contains stringent security and compliance requirements, including CMMC Level 2 certification and strict adherence to ITAR and EAR export controls. Technical data access is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. Packaging must comply with ASTM D3951 and MIL-STD-129, while marking for hazardous materials must follow the Hazard Communication Standard. Additionally, the use of additive manufacturing is prohibited unless specifically authorized in writing. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE8EE-26-T-2406

This contract, identified as SPE8EE-26-T-2406, is a procurement agreement between the Department of Defense and TW Metals, Inc. (dba Oneal Flat Rolled Metals LLC) for the supply of five units of commercial hardware, specifically part number 9515-1.25TK4X846100CL1ARMOR. The order is managed under purchase request 7018024957 and requires delivery to the Anniston Army Depot in Alabama. The terms specify a delivery timeframe of five days after receipt of order, with an original required delivery date of August 24, 2026. Shipping must be handled via the fastest traceable means, excluding parcel post, with FOB destination for both inspection and acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements for procurement.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE4A7-26-R-0748

This procurement is for an indefinite quantity contract for structural supports, identified by NSN 1560-016743400 and part piece number 3239AS2050-1. The contract is issued as a total small business set-aside with a base period of five years and no additional options. It specifies an estimated annual quantity of 80 units, with a production delivery timeline of 285 days and FOB terms set at origin for both shipping and inspection. The solicitation is managed by DLA Aviation and is scheduled for release around August 26, 2026, via the DIBBS system. Because the item involves restricted unclassified data, participating contractors must be DOD certified and submit DD Form 2345 to the Defense Logistics Information Services. All manufacturing must strictly adhere to basic drawing number 30003 3239AS2050.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-23CL

This contract is for the procurement of close tolerance screws, specifically part number NAS1580A4T6, under solicitation SPE4A6-26-T-23CL. The order consists of 100 packages, with each package containing 50 units. The items are designated as critical application items and must be manufactured according to the current revision of the NAS1580 part standard. Delivery is required within 20 days after receipt of the order, with a required delivery date of October 9, 2025. The contract mandates strict quality and packaging standards, including physical identification per MIL-STD-130N and packaging according to MIL-STD-2073-1E. Each fastener must have the entire length of the shank and threads protected by a wrap or sleeve. Inspection and acceptance will occur at the origin, utilizing a zero-based sampling plan. The final shipment is destined for the Government of Israel Ministry of Defense, with freight handled through G&B Packing Company.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPEA46-26-T-17EL

Solicitation SPE4A6-26-T-17EL is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 700 close tolerance screws, identified by NSN 5305010810132. This requirement is part of a Foreign Military Sales program for the Government of Israel Ministry of Defense. The items must be delivered within 20 days after award, with FOB, inspection, and acceptance all occurring at the point of origin. Technical specifications are governed by reference drawing 76301 ST3M652 Revision K, and the procurement incorporates DLA master lists of technical and quality requirements. Quality assurance is strictly managed through sampling methods compliant with MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Packaging and marking must adhere to MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirement RP001. The contract includes various regulatory mandates, including the Buy American Act, DFARS cybersecurity reporting standards, and prohibitions on covered telecommunications equipment. All quotes must be submitted electronically via the DLA Internet Bid Board System.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 1 day

AI Contract Overview

Nashville Electric Service is soliciting bids for the supply of 300 heavy-duty stainless steel wedge anchors measuring 1/4 inch in diameter by 2-1/4 inches in length, each including a nut and washer, designed for secure fastening into solid concrete. The items must meet specified industrial standards for durability and performance in demanding environments, and all units must be delivered to Nashville, Tennessee. The contract, classified as a subcontract under NAICS code 332312, has a response deadline of July 13, 2026, at 7:00 PM Eastern Time, with the solicitation posted on July 6, 2026. Bidders are expected to comply with all technical requirements and delivery timelines, and submissions must be made through the designated vendor portal at the provided link.

General Info

300 stainless steel wedge anchors, 1/4"x2-1/4", with nuts and washers, deliver to Nashville by July 13, 2026.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

This scope was carved out of Z473.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Anchor Wedge

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 6

subcontract

Response DeadlineJul 13

Deadline has passed

Submission Closed

07/13/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTennessee → Nashville Electric Service

ContactsNo contacts available

OfficeN/A

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of 300 units of heavy-duty stainless steel wedge anchors (1/4" x 2-1/4", 1/4"-20 thread), each with nut and washer, for use in solid concrete fastening applications. Items must be delivered to Nashville, TN.