STANDOFF, THREADED, SPACING

This contract pertains to the procurement of 19 threaded standoff spacers identified by NSN 5340-01-229-7753 and part number NAS1831C6E28, manufactured to Revision 5 of the non-government standard NAS1831 dated August 31, 2022. The item is classified as a critical application component, subject to strict quality and configuration control, requiring adherence to the latest revision of the governing standard with no tolerance for deviations unless formally approved through an Engineering Change Proposal or variance request. All hardware must comply with specified technical and quality requirements referenced from the DLA Master List, and the use of Class I ozone-depleting chemicals is strictly prohibited across the entire supply chain, superseding any conflicting specification clauses without relieving product performance obligations. Delivery is required FOB origin within two days of the need date, with inspection and acceptance points at the destination facility in Tracy, California. Packaging must conform to MIL-STD-2073-1E and DLA packaging guidelines, with marking following MIL-STD-129 and no special marking codes applied. Palletization and hazardous material handling are governed by RP001 and IP025 respectively. Sampling for quality verification shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are subject to verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0. The procurement under solicitation SPE7L1-26-T-904L is open to full competition, governed by DoD unit-of-issue standards, with the contract value set at $19.00 per unit for a total of $361. The need date is August 16, 2026, with an original required delivery date of October 14, 2026, and all correspondence and shipping instructions reference the specified DLA logistics channels and contact personnel.