Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

STARTER,ENGINE,GAS

Active
SPRPA126QYC99Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of ENGINE STARTERS for GAS-powered systems under solicitation SPRPA126QYC99, issued by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia, Pennsylvania. The solicitation is open for responses until August 21, 2026, with a mandatory requirement to use the Workflow Pro (WFP) Mod Assist Module and adhere to specific delivery and shipping instructions including FMS-only repair sources such as Honeywell and Parker, which have been designated due to the Army’s inability to support Navy FMS customers. Buyers must comply with the Buy American Act and related free trade agreements and balance of payments requirements, including mandatory certification, and are subject to security prohibitions and exclusions as outlined in recent class deviations. Equal opportunity provisions for workers with disabilities and annual representations and certifications are required, and the contract includes a priority rating notice for national defense, emergency preparedness, and energy programs. The NAICS code 336412 indicates a focus on aircraft engine and engine parts manufacturing. All offeror information is subject to disclosure under Navy protocols, and correspondence must be directed to the primary point of contact at DLA Aviation Philadelphia.

General Info

Procurement of gas engine starters for DoD, FMS-only sources, Buy American Act compliance, due August 21, 2026.

Agency

Department Of Defense → Pa DLA Aviation At PhiladelphiaView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Pa DLA Aviation At Philadelphia
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA

Full Description

Show more
ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|.||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|.|||||||| FMS DELIVERY AND SHIPPING INSTRUCTIONS|3|x|P93B|N52211.21| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|.| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|Robyn.grinarmi@dla.mil| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4|.|||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|.||||||||||| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|.||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|.||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|.| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|.||||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||xx| Repair sources 59364 Honeywell and 92003 Parker have been added as FMS ONLY repair sources due to the Army not being able to repair for Navy FMS customers at this time. ALLEN CHAFFIN N52211.ES 10/29/2021

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
Federal
BEARING,SLEEVE,LINE
Solicitation # SPE4A626Q1284
Solicitation SPE4A626Q1284 is a sources-sought notice issued by DLA Aviation under the Department of Defense to identify qualified suppliers for a sleeve bearing, NSN 3110-01-341-6408, with approved source KATO ENGINEERING INC. (CAGE 32770). The notice invites surplus dealers, small business dealers, and distributors with existing stock or newly manufactured inventory to respond, requiring submission of a completed Surplus Certificate DLAD 52.211-9000 or adequate traceability documentation to verify product acceptability, along with available quantities and pricing. The acquisition will follow FAR 12 procedures for commercial items and FAR 13.5 for other than full and open competition, with no set-aside designated. Responses are due by August 12, 2026, and must be emailed to Matthew Diefes at matthew.diefes@dla.mil. The requested delivery is 11 units with a 255-day delivery window ARO, FOB Origin, with inspection and acceptance occurring at destination, and the item is subject to export control of technical data. The place of performance is Richmond, Virginia, and the contracting office is located at 23237. While the notice identifies the approved manufacturer and specifies the commercial nature of the item, it includes no pricing data, contract value, evaluation factors, or formal contract clauses, as it is preparatory in nature and not a binding solicitation. No packaging, marking, barcoding, or MIL-STD requirements are specified, and no representations, certifications, or socioeconomic claims from offerors are solicited or required beyond traceability and surplus documentation. The solicitation will proceed under terms consistent with standard DLA Aviation procurement practices, with award potentially based on price, past performance, and other factors outlined in the final solicitation document available via DIBBS.
DLA Aviation

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
SPEED MAC - STRATEGIC PROCUREMENT FOR ENGINE EXCELLENCE AND DELIVERY SPEED MULTIPLE AWARD IDIQ.
Solicitation # FA812126RB002
The U.S. Air Force is soliciting proposals under RFP FA812126RB002 for a Strategic Procurement initiative focused on Engine Excellence and Delivery Speed, aiming to establish Multiple Award Indefinite Delivery Indefinite Quantity (IDIQ) contracts to support the repair, overhaul, remanufacture, and new manufacture of parts for the F100-PW-220/229 Pratt and Whitney engine. This effort serves both the U.S. Air Force and Foreign Military Sales, with contracted capabilities supplementing the Oklahoma City Air Logistics Complex’s operations at Tinker Air Force Base. Proposals must be submitted via the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module by 17 August 2026 at 12:00 PM Central Time, with no extensions granted despite prior erroneous dates. A virtual proposal conference is scheduled for 23 July 2026, providing participants an opportunity to engage with the contracting team. The contracts will be awarded under the Revolutionary FAR Overhaul (RFO) Part 15, accommodating both Firm-Fixed-Price and Cost-Reimbursable line items, with no restrictions on foreign participation. The ordering period spans ten years, consisting of a base five-year period and one five-year option, with individual task and delivery orders issued under RFO 16.506 and 16.507. Funding will be obligated per order, and all awardees must meet a minimum order guarantee established after the award conference. While initially scoped for the F100 engine, the contract structure allows for future expansion to other platforms such as the TF33. Commercial and non-commercial, supply and service, and sole source or competitive terms will apply as appropriate, and all documentation must be accessed through the PIEE platform.
FA8121 Afsc Pzaaa

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336412
New
Federal
TRANSDUCER, POSITION / NSN 2915-01-464-1233 / B-1B AIRCRAFT
Solicitation # SPE4A726R0733
The government plans to award an Indefinite Quantity Contract for the supply of DUCT, BLEED AIR, identified by NSN 1560-00-422-1789, under a sole-source or limited-source procurement authorized under FAR 6.302. The contract will have a five-year base period with an Estimated Annual Quantity of 40 units, delivered FOB Destination with inspection and acceptance also at destination. The item is classified as critical but not a Critical Safety Item and is subject to Export Control regulations. Only two approved sources currently exist: Lockheed Martin as the original equipment manufacturer with part number 4P94763-102A and Arrowhead Products with part number 12989-102A. No other sources are approved, and any new contractor must submit a Source Approval Request package to be considered. The Defense Logistics Agency Aviation does not hold complete technical data for this component, which limits competition. The solicitation will not use commercial item acquisition policies, though interested parties may indicate within 15 days if they can offer a commercial item meeting requirements. All contractors must be registered in SAM.gov to be eligible for award, and selection will consider price, past performance, and other factors outlined in the solicitation. The anticipated issue date is August 24, 2026, with responses due by September 25, 2026. The full solicitation will be accessible exclusively via DIBBS in PDF format, and no paper copies will be provided. The contracting office is located in Richmond, Virginia, with primary contact Christopher Rose.
DLA Aviation

POSTED

about 6 hours ago

DEADLINE

in about 2 months
View Details

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

NAICS: 334220
New
Federal
SPRPA1-26-Q-RB26
Solicitation # SPRPA126QRB26
The contract involves procurement of one unit of antenna NSN 7R-5985-015731112-CB under a sole-source justification due to the unavailability of sufficient technical data, economic feasibility, or the ability to draft adequate specifications for competitive bidding. The item is classified as flight critical, requiring prior Government source approval before award, and only previously approved sources have been solicited. New sources must submit detailed documentation per NAVSUP Weapon Systems Support brochures detailing their production experience with similar items or previous approval requests, and failure to provide complete information will disqualify proposals. Time constraints prevent delaying award for new source approval, and the Government may proceed based on fleet support needs if approval cannot be finalized promptly. The procurement is conducted under FAR 6.302-1 as a justifiable single-source action, with no intent to compete, though all interested parties may submit capability statements within 45 days, or 30 days if under an existing Basic Ordering Agreement. Commercial item submissions are accepted within 15 days, though FAR Part 12 policies are not being applied. Technical documentation for reference may be obtained via ASSIST-Online or DODSSP, though design-related materials like drawings and patterns are not available through those channels. The contracting office is the DLA Aviation in Philadelphia with Malcolm Fils listed as the primary point of contact, and responses are due by May 26, 2026.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVC16
This contract pertains to the procurement of shipping and storage containers under solicitation SPRPA126RVC16, issued by the Defense Logistics Agency Aviation at Philadelphia. The item, identified by drawing number 05259-840E001 with the latest revision, requires strict adherence to detailed manufacturing, welding, and quality control standards, with aluminum as the specified shell material. Each container must be equipped with a Unique Identification (UID) marking in data matrix format per MIL-STD-130, and the contractor must obtain the sequential serial number group from NAVICP codes N241.13 or 0771.10. Welding must conform to AWS standards depending on base material, with specific requirements for filler metals, visual inspection at 5x magnification, and documentation. Cleaning and deoxidizing processes must follow precise procedures, including restricted chemical treatments and mandatory mechanical cleaning immediately before welding. The contract mandates that all tooling and testing equipment be provided by the contractor, and materials must be inspected and certified to meet technical specifications. A First Article Test (FAT) is required unless waived for prior approved suppliers who meet strict criteria, including delivery of identical items within three years from the same facility and without any material rejections or deviations. The contractor must submit one unit to a designated test facility within 120 calendar days of contract award, bearing a specific labeling and shipping documentation protocol. Testing includes dimensional verification, a 18-inch free-fall drop test, and a 30-minute pressure leak test with a maximum allowable pressure loss of 0.05 PSIG. The contractor bears all costs associated with FAT submission, testing, and sample disposal, and any failure to deliver on time or disapproval of the sample constitutes a default under the contract. Production containers must be manufactured at the same facility as the FAT sample, and 100% of units must undergo the leak test prior to shipment. All containers must include desiccant per volume, sealed crevices, and an electrodeposited zinc-nickel finish replacing cadmium plating. Packaging must comply with MIL-STD-2073, and the contract enforces Buy American and small business set-aside requirements. A $12,000 government testing cost is factored into pricing, and offerors must clearly indicate whether pricing assumes FAT compliance or waiver.
Other Metal Container Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
Federal
COUPLING,SHAFT,RIGI
Solicitation # SPRPA126QRC42
This solicitation for a rigid shaft coupling under SPRPA126QRC42 is issued under Emergency Acquisition Flexibilities and requires government-approved sources only; proposals from unauthorized distributors or non-approved suppliers will be rejected outright. All submitted items must be newly manufactured with no refurbished, remanufactured, or repaired materials permitted. The acquisition involves FMS customer-owned spares that are never owned by the U.S. Government or entered into the DoD supply chain, exempting them from Item Unique Identification and Valuation requirements per NAVSUP WSS N2 guidance, though Critical Safety Items are subject to identification under DFARS 252.209-7010. Delivery is governed by FMS-specific shipping instructions and transportation by sea, with warranty provisions requiring 12 months of coverage and 45 days after discovery for claims. Buy American and related certification requirements apply, and contractors must comply with security prohibitions, equal opportunity mandates for veterans and workers with disabilities, and mandatory use of Workflow Pro Assist Module. Invoicing follows a combined invoice and receiving report format, and all offers must include proof of authorized distributive status from the approved manufacturer on official letterhead. Government source approval is mandatory, and technical data or drawings are not provided. Compliance with integrity of unit prices, value engineering, and contractor business systems is incorporated by reference, with inspections conducted at the source under Product Verification Testing provisions.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVB77
This contract specifies requirements for the manufacture and delivery of shipping and storage containers under solicitation SPRPA126RVB77, with primary emphasis on rigorous quality control, material standards, and manufacturing procedures. The container must be fabricated from aluminum in strict accordance with Container Research Corporation drawing number 05259-612E001, latest revision, and all referenced specifications, including MIL-STD-130 for Unique Identification (UID) marking in data matrix format on a nameplate. The UID must be procured from NAVICP, and compliance with MIL-STD-2073 for packaging is required. Welding processes must adhere to MIL-W-22248 Class 4 for aluminum, with specific filler materials (4043 for 6061 alloy, 5356 or 5556 for 5000 series), and welders must be qualified under MIL-STD-1595A. Surface preparation demands chemical deoxidization with approved acid solutions no more than 10 days prior to welding (reduced to 3 days under outdoor exposure), followed by mechanical cleaning using approved methods only. All welds must be inspected visually with 5X magnification where necessary, and critical welds may require dye penetrant testing. Desiccant must be included per cubic foot of interior volume per MIL-D-3464 Type II, and cadmium plating is prohibited—replaced by zinc-nickel alloy finish per ASTM B841. The contract mandates a First Article Test (FAT), requiring the contractor to submit one unit within 120 calendar days to a designated government facility for dimensional, functional, leak, and drop testing. The FAT includes a 18-inch free fall test, pneumatic pressure leakage verification, form and fit evaluation, and compliance verification with drawing 612E001. The contractor bears all costs related to FAT submission, testing, repairs, and shipping, with government testing estimated at $12,000. Approved FAT units may be counted as production items only if undamaged and approved by the QAR. Suppliers must certify that production occurs in the same facility as the FAT unit. Waivers to FAT are available only to vendors with identical prior deliveries within three years, using the same processes and facilities, and must be accompanied by dual pricing. 100% production leak testing is required for every unit using Federal Test Method
Other Metal Container Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 332911
New
Federal
28--VALVE,BLEED START
Solicitation # SPRPA126QYC95
The contract solicitation pertains to the procurement of 57 newly manufactured bleed start valves, identified by NSN 0R-2840-016666867-B8 and reference number 5146T31P01, with delivery terms set at FOB origin. This procurement is classified as an emergency acquisition under FAR 5.202(a)(2), which waives the synopsis requirement due to urgency, and is structured as a sole-source action under FAR 6.302-1. Only government-approved sources of supply are eligible for award; refurbished, remanufactured, or repaired items are unacceptable. Distributors must provide an authorized distributor letter on the approved source’s official letterhead at the time of proposal submission. The item is flight-critical and requires government source approval prior to award, as the technical data necessary for full and open competition is either inadequate or exclusively held by the approved source, and the qualification of a new supplier would delay delivery beyond operational needs. Offerors must comply with DFARS clauses 252.209-7010 for Critical Safety Item identification and 252.242-7005 for Contractor Business Systems, along with DLAD clause 46.292 for product verification testing at the source. To be considered, all offerors must submit complete documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, either detailing their experience producing identical or similar items or demonstrating capability if the item is new to their production line. Those with pending source approval requests at NAVSUP WSS must include a copy of their submission cover letter. Failure to provide all required information renders a proposal technically unacceptable and ineligible for award. The solicitation was posted on August 5, 2026, with a response deadline of September 21, 2026, and is managed by the Department of Defense, DLA Aviation office in Philadelphia. Proposals received within 45 days of posting may be evaluated, and the Government retains full discretion to determine whether competition is warranted. The point of contact for all submissions and inquiries is Brett N. Duffey, with email and phone details provided for direct communication.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in about 2 months
View Details
NAICS: 334511
New
Federal
58--TRANSMITTER, RADAR,
Solicitation # SPRPA126RXA69
The contract involves the procurement of a single unit of a radar transmitter, identified by NSN 7R-5841-015873027-P8, under solicitation number SPRPA126RXA69, with delivery specified FOB origin. Issued by the Department of Defense through Pa DLA Aviation at Philadelphia, this acquisition is conducted under Emergency Acquisition Flexibilities, emphasizing the urgency and critical nature of the item. The contract strictly requires newly manufactured spare parts only, explicitly prohibiting refurbished, remanufactured, or repaired materials. This is a critical application item, necessitating that the source of the parts be approved by the design control activity to ensure quality, given the specialized engineering skills and manufacturing knowledge required. The approved source holds essential data rights and proprietary technical information, which are not economically transferable to the Government, maintaining the integrity and performance standards of the part. Any alternative suppliers must undergo a rigorous qualification process aligned with the design control activity’s procedures and must be approved by the cognizant Government engineering authority responsible for the part’s specific application. The response deadline for offers is March 30, 2026. The contract is managed from Philadelphia, PA, with Mary S. Lindsay as the primary point of contact for this solicitation. The emphasis on maintaining strict source approval and quality compliance highlights the critical role of this radar transmitter within defense operations and the necessity of adherence to established acquisition protocols under emergency provisions.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 336412
New
Federal
28--BLADE,TURBINE ROTOR
Solicitation # SPRPA126QYC96
The contract solicitation is for 648 newly manufactured turbine rotor blades, NSN 0R-2840-016995266-B8, under emergency acquisition authorities with a waived synopsis due to urgency. All items must be newly manufactured with no acceptance of refurbished, remanufactured, or repaired components. Only government-approved sources are eligible for award, and any distributor must submit an authorized distributor letter on the approved source’s letterhead at time of proposal submission. The part is classified as flight critical and has an unstable design, with known performance issues and anticipated configurational changes that will render the current version obsolete. Due to these technical uncertainties and critical safety implications, Government source approval is mandatory prior to contract award, and only previously approved sources have been solicited. New sources must submit comprehensive documentation per NAVSUP WSS Source Approval Brochures for spares or repair, and failure to provide complete data will render an offer ineligible. The requirement is being handled under FAR 6.302-1 as a sole-source action due to limited competition eligibility. Proposals are due by September 21, 2026, and must be submitted to the designated point of contact; failure to meet source approval requirements may still allow award based on Fleet support needs if timely approval cannot be secured.
Aircraft Engine and Engine Parts Manufacturing

POSTED

1 day ago

DEADLINE

in about 2 months
View Details
NAICS: 336412
New
Federal
28--BLADE,COMPRESSOR,AI
Solicitation # SPRPA126QYC98
This solicitation is for 16 newly manufactured compressor blades designated as NSN 0R-2840-017141020-B8 under emergency acquisition authority, with delivery terms FOB origin. The procurement is strictly limited to approved government sources due to the critical safety nature of the item, which is flight critical and requires engineering source approval to ensure continued performance and quality. Refurbished, remanufactured, or repaired components are expressly prohibited, and only suppliers previously vetted and approved by the Government may submit bids. Distributors must provide an authorized distributor letter on the approved source’s official letterhead at the time of proposal submission. The item is subject to DFARS Clause 252.209-7010 for Critical Safety Items and DLAD Clause 46.292 for product verification testing at the source. The Government retains exclusive access to proprietary technical data, manufacturing knowledge, and design control capabilities essential to the part’s integrity, which are not commercially available and cannot be replicated without the approved source’s expertise. Non-approved sources must submit comprehensive documentation per the NAVSUP Weapon Systems Support Source Approval Brochures—either for spares or repair—detailing experience with identical or similar items, and failure to provide this information will render proposals ineligible. Proposals must be received by September 21, 2026, and submission does not guarantee competition, as this procurement operates under FAR 6.302-1 as a sole-source action due to urgency and technical limitations. The contracting office is the Department of Defense’s DLA Aviation at Philadelphia, with Brett Duffey as the primary point of contact.
Aircraft Engine and Engine Parts Manufacturing

POSTED

1 day ago

DEADLINE

in about 2 months
View Details