Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

State Farm Agribusiness – Soil Samples and Analysis

Active

QQ-129752State & Local

Response Deadline10/16/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Virginia Department of Corrections Division of Institutions is soliciting bids for soil sampling and analysis services to support State Farm Agribusiness. This project requires professional soil testing to ensure optimal agricultural productivity at the State Farm location in Virginia. Interested vendors must submit their responses by October 16, 2026, to be considered for the contract. The solicitation, identified as QQ-129752, is managed by Deborah Ayers. All prospective bidders should refer to the provided specifications and terms and conditions to ensure full compliance with the agency's requirements for soil analysis. The contract is categorized as a SLED organization procurement focused on maintaining the agricultural integrity of the state's farming operations.

General Info

Virginia DOC seeks soil sampling and analysis bids for State Farm by October 2026.

Agency

Virginia → DOC - Division of Institutions

NAICS

541380 - Testing Laboratories and Services

Place of Performance

State Farm, VA, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseSolicitation

PostedOct 9

Solicitation

Response DeadlineOct 16

Submission deadline

Response Deadline

10/16/2026, 03:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyVirginia → DOC - Division of Institutions

Contacts1 person available

OfficeN/A

Organization / AgencyVirginia → DOC - Division of Institutions

Office AddressN/A

Contacts

Deborah Ayers

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

SEE ATTACHED SPECIFICATIONS, TERMS AND CONDITIONS. SOIL SAMPLING AND ANALYSIS FOR STATE FARM AGRIBUSINESS

Similar Contracts

Same NAICS industry code

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation (MTC) is seeking quotes for a subcontracting opportunity to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing materials from floor tiles in the Gymnasium, Warehouse, and Warehouse Storage Area, totaling approximately 4,200 square feet. All work must be performed by contractors holding all required State of Illinois licenses and certifications, utilizing accredited laboratories, and adhering to federal, state, OSHA, and EPA regulations. This fee-for-service solicitation is open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Bids must be submitted via email by October 21, 2026, and must include a completed bid sheet, supplier packet (W-9, self-certification, and acceptance of terms), proof of insurance, and three references for similar projects. Award selection will be based on best value. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and includes strict requirements for information security, Department of Labor records management, and the provision of waste shipment records and a final project completion report.

Joliet Job Corps

POSTED

about 11 hours ago

DEADLINE

Chemical Fume Hood and Biosafety Cabinet CertificationThis subcontract involves the annual certification and calibration of laboratory airflow containment systems for prime contractors working on Mississippi Department of Public Safety projects. The scope of work includes the testing and certification of 43 chemical fume hoods and 5 biosafety cabinets, utilizing specialized airflow anemometers and HEPA filter testing equipment. The selected provider is required to deliver formal certification reports and apply calibration stickers to all tested units. To qualify for this engagement, the contractor must hold ISO/IEC 17025 accreditation specifically covering field calibrations and airflow containment. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 10, 2026.

MS DEPT of PUBLIC SAFETY

POSTED

DEADLINE

in about 1 month

First Article Testing and NDI Services for F100 ContainersThis subcontract involves providing specialized testing and inspection services for F100 containers under DLA Aviation at Oklahoma City. The scope of work requires the performance of dimensional inspections using NIST-traceable tooling, visual audits based on USAF standards, and non-destructive inspection methods such as X-ray or Dye Penetrant. The final deliverable for these services is a completed First Article Test Report. To ensure compliance and quality, the contractor must employ certified NDI technicians and adhere to ISO 10012-1 calibration standards. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must submit their responses by November 12, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

Non-Destructive Testing (NDT) and Ultrasonic InspectionThis subcontract involves providing specialized non-destructive testing and ultrasonic inspection services for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work includes performing dye penetrant inspections on valve body weld ends and ultrasonic inspections on starting materials, adhering to specific technical standards including T9074-AS-GIB-010/271, S9074-AR-GIB-010A/278, and MIL-STD-2132. A critical requirement for this contract is that the service provider must be an approved source for Critical Safety Item testing. The successful contractor is responsible for delivering certified NDT and Ultrasonic Inspection Reports. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Steam Jacketed Kettle Hydrostatic TestingThis subcontract involves performing hydrostatic pressure testing for prime contractors on vessel repair projects managed by the Navsup Flc Sigonella Naples Office. The scope of work requires the use of hydrostatic pumps, pressure gauges, and testing manifolds to pressurize steam jacketed kettles with water to identify leaks and structural deformation. All activities must be conducted in strict accordance with Reference 65111-3-009 Rev A/1 and FAR 52.246-1. The selected provider is responsible for delivering a formal hydrostatic test report and a certification confirming the integrity of the kettles. This opportunity falls under NAICS code 541380 and is associated with the Department of Defense. Interested parties should note the response deadline of October 15, 2026.

Navsup Flc Sigonella Naples Office

POSTED

DEADLINE

Flight Critical Component NDT InspectionThe Flight Critical Component NDT Inspection subcontract involves providing independent non-destructive testing for prime contractors on DLA Aviation projects. The primary objective is to verify the structural integrity of regulating valves through a 100% inspection of critical characteristics. Approved testing methodologies include ultrasonic, radiographic, or liquid penetrant methods to ensure the highest safety and quality standards for flight critical components. To qualify, service providers must maintain ISO 9001 certification and employ technicians certified at NDT Level II or III. The successful contractor is responsible for delivering both certified NDT inspection reports and the certified components. This opportunity is managed by the Department of Defense through the Pa DLA Aviation At Philadelphia office under NAICS code 541380, with a response deadline of October 20, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Hydrostatic and Non-Destructive Testing (NDT)This subcontract for Navsup Weapon Systems Support Mech involves performing critical safety testing for prime contractors. The scope of work includes conducting hydrostatic testing according to drawing G985455 and non-destructive testing on weldments. All testing must be performed using calibrated gauges that comply with MIL-STD-45662 or ISO10012-1 standards. To be eligible, the provider must hold ISO/IEC 17025 accreditation. The contract requires the delivery of test certification reports in accordance with CDRL DI-MISC-S08678. This opportunity falls under NAICS code 541380 and is associated with the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

NETA Certified Electrical Power Distribution System TestingThis SDVOSB sole source subcontract, managed by the Department of Veterans Affairs Network Contract Office 15, involves NETA Certified Electrical Power Distribution System Testing for medical center projects in Marion. The scope of work requires the maintenance, inspection, adjustment, and tri-annual electrical testing of critical infrastructure, including 325 electrical panels, 135 transformers, 220 switches, 6 generators, and 25 automatic transfer switches. To ensure compliance and safety, all work must be performed by NETA-certified technicians under the guidance of a Supervising Field Service Engineer. The project must strictly adhere to NETA 2019, NFPA 70E, and VHA Directive 1028 standards, with a requirement for the delivery of comprehensive maintenance and testing reports. The response deadline for this opportunity is November 9, 2026.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

First Article Testing and Certification ServicesThis subcontract for First Article Testing and Certification Services supports prime contractors on DLA Land Warren projects within the Department of Defense. The scope of work involves executing rigorous testing protocols for light-transmitting indicating panels to validate manufacturing processes in accordance with the Technical Data Package and FAR 52.209-3. Using precision measurement equipment, the contractor must verify that all hardware meets strict specifications and deliver a government-approved First Article Test Report. The project is categorized under NAICS code 541380 and will be performed in Warren. To ensure the highest level of quality and consistency, the contractor is required to adhere to ISO 9001:2015 quality standards. The solicitation was posted on October 9, 2026, with a response deadline of November 9, 2026.

DLA Land Warren

POSTED

DEADLINE

Production Lot Testing and Inspection ServicesThis subcontract for Production Lot Testing and Inspection Services supports the Department of Defense through Navsup Weapon Systems Support Mech. The selected provider will perform technical testing and inspections for prime contractors to validate production lots, ensuring all work adheres to technical specifications and the 651AS drawing series. Key responsibilities include coordinating government-witnessed testing and maintaining strict compliance with DCMA QAR requirements and DD Form 1423. The primary deliverable for this engagement is an approved Production Lot Test/Inspection Report. Classified under NAICS code 541380, the opportunity was posted on October 9, 2026, with a response deadline of November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Quality ValidationThis subcontract for Non-Destructive Testing (NDT) and Quality Validation supports DLA Aviation projects through the Department of Defense. The selected contractor will perform specialized inspection and testing to validate the structural integrity of Cold Section Modules for prime contractors. Required technical capabilities include the use of specialized equipment to conduct X-ray, Ultrasonic, Magnetic Particle, or Dye Penetrant inspections. To qualify, contractors must hold AS 9100 and ISO 9001:2000 certifications. Key deliverables for the project include detailed inspection reports, certifications of conformance, and validated Receiving Reports. The solicitation was posted on October 9, 2026, with a response deadline of November 12, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

Oxygen Clean Precision CleaningThis subcontract opportunity with the Department of Defense, specifically for Pa DLA Aviation At Philadelphia, involves the precision cleaning and testing of components for prime contractors. The scope of work focuses on cleaning components for shipboard oxygen, helium, helium-oxygen, nitrogen, and hydrogen systems. All work must be performed in accordance with MIL-STD-1330 standards, utilizing certified clean-room facilities and specialized contamination testing equipment to deliver certified Oxygen Clean components. The project falls under NAICS code 541380 and requires the contractor to hold a MIL-STD-1330 certification. Interested parties should note that the solicitation was posted on October 9, 2026, with a response deadline set for November 9, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

More opportunities from Virginia → DOC - Division of Institutions

Same awarding agency

DOCA-756-27-04 - Tortilla Press, Dough Divider Rounder, Conveyor, Stand, Trolley loader, Accessories - Training

Solicitation # DOCA-756-27-05

Solicitation DOCA-756-27-05 is an Invitation for Bids issued by the Commonwealth of Virginia Department of Corrections for the procurement and installation of manufacturing equipment at the Bland Correctional Center Agribusiness processing plant. The required equipment includes a Large Wedge Press Tortilla Press capable of producing 1,800 tortillas per hour, a Dough Divider Rounder with a capacity of 36 dough balls per batch, and associated accessories such as a conveyor, stand, and trolley loader. The selected contractor is responsible for the supply, delivery, unloading, and installation of all equipment, as well as providing three days of all-inclusive on-site training and all necessary operating manuals and schematics. The contract is governed by the laws of the Commonwealth of Virginia and the Virginia Vendors Manual, with a desired delivery timeline of 180 calendar days after receipt of order. Award priority is given to DSBSD-certified micro or small businesses, and the contract will be awarded to the lowest responsive and responsible bidder. Key requirements for bidders include registration via the eVA portal, submission of a Small Business Subcontracting Plan, and adherence to strict security protocols, including background checks for personnel. Equipment must remain operational for seven business days following start-up to ensure acceptance, and all materials are guaranteed against defects for 120 days following delivery.

Food Product Machinery Manufacturing

POSTED

DEADLINE

SF Meat Plant - Freezer # 8 - Replace Bi-Parting Door

Solicitation # QQ-129348

The Virginia Department of Corrections Division of Institutions is soliciting bids for the replacement of the bi-parting door for Freezer number 8 at the State Farm Meat Plant located in Virginia. This project is identified by solicitation number QQ-129348 and is managed by the SLED organization type. Interested parties must submit their responses by the deadline of October 14, 2026, at 3:00 PM. The primary point of contact for this procurement is Deborah Ayers, who can be reached via email or phone for further inquiries regarding the specifications and terms of the contract.

Metal Window and Door Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS