Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Steering Control Shipping and Storage Container Fabrication

Active

Federal

Response Deadline11/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by Construction and Equipment Containers for the Department of Defense, involves the fabrication and supply of specialized shipping and storage containers designed for prime contractors fulfilling DLA supply contracts. The contractor is responsible for manufacturing 11 containers according to NSN 8145008564997 specifications, ensuring all units include internal blocking and bracing for mechanical protection and adhere strictly to DLA Packaging Requirements for Procurement. Key deliverables include the completed containers and a validated First Article Test report as specified under CLIN 0002. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332439, with the place of performance located in Anniston, Alabama. The response deadline for this requirement is November 6, 2026.

General Info

Fabricate 11 specialized DoD containers per NSN specifications by November 6, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

NAICS

332439 - Other Metal Container Manufacturing

Place of Performance

ANNISTON, AL, 36201-5021, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE8ED-27-T-0152.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SHIPPING AND STORAG

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineNov 6

Submission deadline

Response Deadline

11/06/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies specialized shipping and storage containers for prime contractors delivering DLA supply contracts. Fabricates containers to NSN 8145008564997 specifications, executes a First Article Test (FAT) per CLIN 0002, and integrates internal blocking and bracing for mechanical protection. Must meet DLA Packaging Requirements for Procurement. Delivers 11 completed containers and one validated FAT report.

Similar Contracts

Same NAICS industry code

ISU Divider Supply (NSN 8145-01-384-9253)This subcontract involves the manufacture or sourcing of 10 ISU Dividers under NSN 8145-01-384-9253 for prime contractors supporting DLA Troop Support equipment contracts. The selected provider must ensure all materials comply with the Buy American Act and the Berry Amendment. All units must be packaged and marked according to ASTM D3951 and MIL-STD-129 standards, with palletization following RP001 guidelines. The contract requires the delivery of the 10 units FOB Origin to Niagara Falls, New York. Managed under NAICS code 332439 for the Department of Defense, the opportunity was posted on October 27, 2026, with a response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPE7M4-27-Q-0091

Solicitation SPE7M4-27-Q-0091 is issued by the DLA Weapons Support Fluid Handling Division for the procurement of 983 units of Loop Clamps, identified by NSN 5340-00-817-4762. This item is designated as a critical application item and requires the supplier to meet the current revision of the Source Control Drawing. Offerors not listed as approved sources must obtain approval from the Original Equipment Manufacturer and provide certification to the DLA. The delivery is required within 90 days after order, with a material need ship date of November 4, 2026, and is shipped FOB Destination to the DLA Distribution Depot Oklahoma at Tinker AFB. The contract is not a small business set-aside and falls under NAICS code 332439. Due to the nature of the technical data, this procurement is subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and authorization from the DLA controlling authority. Compliance with CMMC Level 2 certification from a C3PAO is also required. Packaging and marking must adhere to RP001, MIL-STD-129, and MIL-STD-130N, while hazardous materials must follow IP025. Award will be based on best value, evaluating price, offered delivery, and past performance. Invoicing and payments must be processed electronically through the Wide Area Workflow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

SHIPPING AND STORAGE C

Solicitation # SPE8ED-27-T-0090

Solicitation SPE8ED-27-T-0090 is a Request for Quotations issued by DLA Troop Support Construction and Equipment Containers for the procurement of two shipping and storage containers, specifically test kits identified by NSN 8145-01-732-8534 and part number A216 from Flambeau, Inc. The required delivery date is June 8, 2027, with a delivery window of 120 days. Supplies are to be delivered to the DLA Distribution DSP New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Administrative requirements include the use of Wide Area Workflow for invoicing and payment. The solicitation also incorporates critical federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 24 hours ago

DEADLINE

COLLAPSIBLE EQUIPME

Solicitation # SPE8ED-27-T-0093

Solicitation SPE8ED-27-T-0093 is a fixed-price request for quotations issued by the DLA Troop Support Construction and Equipment Containers office for the procurement of four collapsible equipment racks. The required items are identified by NSN 8145-01-530-2949 and part number WFI-CER40-B from Wel-Fab Defense LLC. Delivery is required within five days of award to Mountain Home Air Force Base, Idaho, with an original required delivery date of February 6, 2025. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Additionally, the contractor must comply with DFARS 252.204-7012 regarding the safeguarding of covered defense information and follow the Hazard Communication Standard for any hazardous materials. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. This acquisition falls under NAICS code 332439 and incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 24 hours ago

DEADLINE

DRUM, SHIPPING AND STOR

Solicitation # SPE8E9-27-T-0137

Solicitation SPE8E9-27-T-0137 is a request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 4,000 steel shipping and storage drums (NSN 8110000307780), split into two line items of 2,000 units each. This is a Service-Disabled Veteran-Owned Small Business set-aside requiring SBA certification. The drums must be hazardous waste approved, fully assembled, and manufactured according to MIL-DTL-6054G and UN/POP 1A2/Y1.5/150 standards. Key technical specifications include a 208-liter rated capacity, a minimum material thickness of 1.10mm for the drum and 2.40mm for the locking ring, and a rust-inhibiting exterior coating capable of passing ASTM-B-117 salt spray testing. Delivery is required within 48 days after order, with a final required delivery date of February 24, 2027, to facilities in New Cumberland, Pennsylvania, and Tracy, California. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, ensuring physical and mechanical protection during transport. The government will not evaluate offers utilizing additive manufacturing. Compliance with the Buy American Act and Berry Amendment is required, and all invoicing must be processed through the Wide Area Workflow system. Inspection and acceptance will occur at the destination.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 24 hours ago

DEADLINE

BRACKET, MOUNTING

Solicitation # SPE7L1-27-T-1401

Solicitation SPE7L1-27-T-1401 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of four mounting brackets, identified as NSN 5340-01-464-7761. This is designated as a critical application item that must be produced in accordance with basic drawing 19207 12465329 Revision E and several other reference drawings. The required delivery date is February 27, 2027, with a need ship date of April 6, 2027, for delivery to the DLA Distribution DSP New Cumberland facility in Pennsylvania. The contract mandates strict quality and technical compliance, requiring the manufacturer's inspection system to meet SAE AS9003 or ISO 9001 standards. Packaging must adhere to ASTM D3951 and MIL-STD-129, while property identification must follow MIL-STD-130N. Due to the nature of the technical data, this procurement is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the solicitation incorporates the Buy American Act and Berry Amendment restrictions, and requires the use of the Wide Area WorkFlow system for all electronic invoicing and receiving reports.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPE8ED-27-T-0154

Solicitation SPE8ED-27-T-0154 is a request for quotations issued by DLA Troop Support, Construction and Equipment Containers, for the procurement of 10 units of ISU Dividers, identified by NSN 8145-01-384-9253. This commercial off-the-shelf item is to be delivered to a consignee in Niagara Falls, New York, with a required delivery date of October 22, 2026, and a delivery window of 20 days after receipt of order. The procurement is not a small business set-aside and falls under NAICS code 332439. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1 and 52.246-2. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Palletization must comply with RP001. Invoicing and payment are to be processed electronically via the Wide Area WorkFlow system. The solicitation incorporates several critical federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information and cyber incident reporting. Quotations must be submitted by November 9, 2026, and additive manufacturing is prohibited unless specifically approved by the contracting officer.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 24 hours ago

DEADLINE

ISO Shipping Containers - Quadcon

Solicitation # SPE8ED27Q0080

The Department of Defense, through DLA Troop Support, has issued a pre-solicitation notice for the procurement of 149 Quadcon ISO Shipping Containers under National Stock Number 8150-01-483-9115. This requirement is designated for an OCONUS location and falls under NAICS code 332439. This notice serves as an announcement of intent and is not a formal request for quote. Full requirements will be detailed in the official solicitation published on DIBBS. All responsible sources are eligible to submit bids or proposals in accordance with FAR 5.207 (c) (16). The primary point of contact for this action is Avril Dickerson.

DLA Troop Support

POSTED

DEADLINE

2-20 foot Containers with Gantry Beam and Chain Lift

Solicitation # W912ES27QA004

Solicitation W912ES27QA004, issued by the U.S. Army Corps of Engineers, St. Paul District, is a firm-fixed-price request for the procurement of two brand-new 20-foot High Cube open-side storage containers. These units require custom structural steel fabrication to integrate a 1-ton capacity Load Handling Equipment crane and hoist system. The system must feature internal and external gantry beams with a manual chain hoist capable of extending 6 feet beyond the container footprint. Key technical requirements include PE-stamped structural calculations, compliance with EM 385-1-1 and ASME standards, and a 125 percent proof load test. The containers must be finished with a durable commercial-grade exterior coating, while all gantry rails and hoist components must be painted in industrial Safety Yellow. The contract is a total small business set-aside with a final delivery deadline of March 1, 2027, to Fountain City, Wisconsin. Final acceptance is contingent upon a physical inspection and functional demonstration by USACE staff to ensure the hoist traverses the rails and extends fully without mechanical defects or instability. Required deliverables at the time of testing include the signed PE structural review, load test certification, and an approved Activity Hazard Analysis. Proposals must be submitted electronically through the PIEE Solicitation Module, and the government will evaluate awards based on price, technical ratings, and past performance as recorded in the Supplier Performance Risk System.

W07V Endist St Paul

POSTED

DEADLINE

SHIPPING AND STORAG

Solicitation # SPE8ED-27-T-0152

Solicitation SPE8ED-27-T-0152 is a request for quotations from the Defense Logistics Agency for the procurement of 11 steering control shipping and storage containers (NSN 8145-00-856-4997) and one first article test unit. The items are to be delivered to the Anniston Army Depot by April 15, 2026, with a delivery lead time of 60 to 95 days. The procurement is conducted under the First Destination Transportation program, and while the solicitation is not a small business set-aside, it incorporates a HUBZone price evaluation preference. The contract mandates strict adherence to quality and security standards, including CMMC Level 2 self-assessment, SAE AS9003 or ISO 9001 compliance for manufacturer inspection systems, and approved JCP certification for accessing export-controlled technical data under ITAR or EAR. Packaging must follow MIL-STD-2073-1E and RP001 requirements, with marking compliant with MIL-STD-129. Inspection and acceptance will occur at the origin. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

BOX, SHIPPING AND STORA

Solicitation # SPE4A6-27-T-6899

Solicitation SPE4A6-27-T-6899 is a small business set-aside issued by the DLA Weapons Support ASC Commodities Division for the procurement of two shipping and storage boxes, identified by NSN 8145-01-658-0348 and Boeing part number MA280019-8. The contract specifies a delivery timeframe of 20 days after order, with an original required delivery date of October 14, 2026. Terms are set as FOB Origin, with both inspection and acceptance occurring at the destination in Easton, Pennsylvania. The contractor is required to use traceable shipping means and is prohibited from using parcel post. Technical compliance is governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All items must be marked and labeled according to MIL-STD-129, and palletization must adhere to RP001. Quality assurance requires the manufacturer's inspection system to comply with ISO 9001:2015 or an equivalent standard, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity reporting standards under DFARS 252.204-7012.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

ISO Cargo Container Manufacturer (NSN 8150-01-463-8553)

DLA Troop Support

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing military-grade packaging and marking for prime contractors supporting DLA Troop Support supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking shipments, and RP001 for palletizing cargo. To ensure transit stability to Hawaii, the contractor must utilize MIL-SPEC crates and approved preservation materials to deliver shipment-ready, palletized units that meet all DLA requirements. The project is managed under the Department of Defense through Construction and Equipment Containers, with the place of performance located at Schofield Barracks, Hawaii. The opportunity is categorized under NAICS code 488510. Interested parties should note the response deadline of November 9, 2026.

Freight Transportation Arrangement

POSTED

about 24 hours ago

DEADLINE

Manufacture of Pressure Tank (P/N 16U4991-1)This subcontract involves the manufacture of one specialized pressure tank, identified as P/N 16U4991-1 and NSN 5430-01-529-1392, for prime contractors supporting Department of Defense projects via DLA Troop Support. The fabrication process must strictly adhere to DLA Technical and Quality Requirements RA001 and comply with Berry Amendment domestic sourcing mandates. Additionally, the provider is required to furnish Safety Data Sheets in accordance with 29 CFR 1910.1200(g). The project is managed under NAICS code 332999 and is associated with Construction and Equipment Containers. Performance of the contract is designated for Schofield Barracks, zip code 96857-5200. The response deadline for this requirement is November 9, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 24 hours ago

DEADLINE

Military-Grade Packaging and Preservation ServicesThis subcontract for Military-Grade Packaging and Preservation Services involves the specialized handling of heavy laundry equipment for prime contractors supporting DLA Troop Support projects. The scope of work requires the packing, marking, and preservation of three units specifically prepared for vessel shipment to an overseas destination. All work must adhere to strict military and industry standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and ASTM-D-3951 for preservation. To ensure the equipment survives overseas transit, the contractor must apply weatherproof protection using non-plastic cushioning and wrapping materials. The project is managed under the Department of Defense through Construction and Equipment Containers, with the place of performance located at FPO 96661. Interested parties must respond by the deadline of November 9, 2026.

Freight Transportation Arrangement

POSTED

about 24 hours ago

DEADLINE

Commercial Laundry Drying Tumbler SupplyThis subcontract involves the supply of three commercial grade laundry drying tumblers for prime contractors working on Department of Defense projects under DLA Troop Support. The required equipment is specifically identified by NSN 3510013170968 and Edro Corporation Part Number M50TDE, with delivery terms set as FOB Destination to a performance location in FPO 96661. To ensure compliance with federal procurement standards, all provided equipment must adhere to the Buy American Act and the Berry Amendment. The procurement is categorized under NAICS code 423440 and is managed through Construction and Equipment Containers.

Other Commercial Equipment Merchant Wholesalers

POSTED

about 24 hours ago

DEADLINE

Specialized Packaging and Freight ServicesThis subcontract for Specialized Packaging and Freight Services involves providing palletization, marking, and expedited shipping for prime contractors delivering DLA supply contracts to USA DEP Corpus Christi. The service provider is responsible for ensuring all items are palletized according to RP001 DLA Packaging Requirements and marked in compliance with ASTM D3951 and MIL-STD-129 standards. The primary objective is the delivery of properly packaged and marked items to the destination using the fastest traceable shipping methods available. This effort is managed under NAICS code 488510 for the Department of Defense, with the place of performance located in Corpus Christi, Texas.

Freight Transportation Arrangement

POSTED

about 24 hours ago

DEADLINE

Supply of Aircraft Component (NSN 8145-01-128-1857)This subcontract involves the supply of aircraft components, specifically NSN 8145-01-128-1857, to prime contractors fulfilling Department of Defense supply contracts. The provider must ensure all items meet the technical and quality standards outlined in the DLA Master List, adhering strictly to the specified Unit of Issue and Quantity per Unit Pack. Additionally, the contractor is required to comply with the Buy American Act and Berry Amendment regulations and is responsible for the physical delivery of the items to the designated destination. The contract is managed under NAICS code 336413 and is associated with Construction and Equipment Containers. Performance of the contract will take place in Corpus Christi, Texas. Interested parties must note the response deadline of November 9, 2026, following the posting date of October 27, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

Specialized Shipping and Storage Drum ManufacturerThis subcontract with Construction and Equipment Containers for the Department of Defense requires the manufacture and delivery of 106 fully assembled and tested shipping and storage drums. The drums must be fabricated with removable heads, locking rings, and nut and bolt closures in strict accordance with UN 1A2/Y37/S and 49 CFR Section 178 standards. Additionally, the interiors must be treated with corrosion-inhibiting enamel to ensure durability and protection. The contractor is responsible for ensuring all units are packaged according to ASTM D3951 and marked in compliance with MIL-STD-129. The final deliverables must be fully assembled, tested, and labeled before delivery to the prime contractors on DLA supply contracts. Performance for this requirement is centered in the 28533-5040 zip code area under NAICS code 332431.

Metal Can Manufacturing

POSTED

about 24 hours ago

DEADLINE

Supply of Stackable Transit Cases with Air ValvesThis HUBZone set-aside subcontract, issued by Construction and Equipment Containers for the Department of Defense, requires the delivery of 68 stackable transit cases with integrated air valves. The cases must meet NSN 8145-01-563-8624 specifications and strictly adhere to RP001 DLA Packaging Requirements, ASTM D3951, and MIL-STD-129 marking standards. Performance will take place in Tracy, California, under NAICS code 326113. To be eligible, contractors must ensure full compliance with the Buy American Act and maintain cybersecurity standards as outlined in NIST SP 800-171. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 24 hours ago

DEADLINE

HUMIDITY INDICATOR

Solicitation # SPE8ED-27-T-0092

Solicitation SPE8ED-27-T-0092 is a fixed-price request for quotations issued by the DLA Troop Support Construction and Equipment Containers office for the procurement of 23 humidity indicators, identified by NSN 8145-99-225-7605. The items are to be delivered to DLA Distribution San Joaquin in Tracy, California, with a required delivery lead time of 46 days after order. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and specifies packaging and marking standards under MIL-STD-2073-1E and MIL-STD-129. Key compliance requirements include a CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to the Buy American and Balance of Payments Program. Additionally, the successful contractor must utilize Wide Area WorkFlow for all invoicing and payment requests. Offerors must provide representations regarding their small business status under NAICS 332510 and certify that they do not provide covered defense telecommunications equipment or services.

Hardware Manufacturing

POSTED

about 24 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS