This Solicitation opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

STEM, FLUID VALVE

Closed

SPE7MC-26-T-140LFederal

Submission Closed07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332912

New

DIBBS

Supply of Fluid Pressure Regulating ValvesThis subcontract involves the supply of two fluid pressure regulating valves for prime contractors supporting the Defense Logistics Agency. The specific requirement is for NSN 4820002856125, corresponding to Watts Regulator Co part number R-119-02C. All items must be delivered FOB Origin and must adhere to strict packaging and marking standards, specifically ASTM D3951 for packaging and MIL-STD-129 for shipment marking. The procurement falls under NAICS code 332912 and is managed through the Department of Defense. Interested parties must note the response deadline of November 9, 2026, to ensure compliance with the solicitation timeline established by the agency.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Fuel and Oil Servicing Nozzles (NSN 4930-01-574-2434)This subcontract involves the manufacture or sourcing of 12 fuel and oil servicing nozzles, specifically NSN 4930-01-574-2434, for prime contractors delivering to DLA Troop Support. The contractor must ensure all units are produced according to the DLA Master List of Technical and Quality Requirements and adhere to strict marking, labeling, and palletization standards per MIL-STD-129 and RP001. All materials provided under this agreement must comply with the Buy American Act and the Berry Amendment. The performance of this contract is centered in Cherry Point, and the procurement falls under NAICS code 332912 for the Department of Defense.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Copper Alloy Ported Ball Valve Supplier (NSN 4820013401540)This subcontract involves the supply of three copper alloy ported ball valve units for prime contractors supporting the Defense Logistics Agency. The supplier is responsible for manufacturing or sourcing the valves according to NSN 4820013401540, with a strict requirement that no mercury or mercury-containing compounds are intentionally added. All deliverables must adhere to the DLA Master List technical and quality requirement RA001. The contract mandates full compliance with the Berry Amendment and the Buy American Act to ensure domestic sourcing standards are met. The opportunity is categorized under NAICS code 332912 and is managed by the Department of Defense. Interested parties must respond by November 9, 2026, for performance located at FPO 09514.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Linear Direct Control ValvesThis subcontract involves the manufacture or procurement of 15 Linear Direct Control Valves, specifically matching Astec Industries Inc Part Number 31F98 and NSN 4820011263316, for prime contractors supporting DLA supply contracts. The selected provider must ensure all units are packaged according to RP001 and ASTM D3951 standards and marked in compliance with MIL-STD-129. Final delivery of the packaged and labeled valves is required at USS Ft Lauderdale. The agreement is managed under the DLA Weapons Support Land Supply Chain within the Department of Defense. To maintain compliance, the contractor must adhere to DFARS 252.204-7012 cybersecurity standards and DLA RA001 quality requirements. The project falls under NAICS code 332912, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

ACCUMULATOR, HYDRAULIC

Solicitation # SPE4A7-27-T-2277

Solicitation SPE4A7-27-T-2277 is issued by the Defense Logistics Agency for the procurement of one hydraulic accumulator, identified as a critical application item with NSN 1650-01-463-6947. The requirement specifies compatible part numbers from Northrop Grumman Systems Corporation (74B680060-121) and Valcor Engineering Corporation (884119-05). The delivery timeline is set for 165 days, with a need ship date of April 20, 2027, and an original required delivery date of May 17, 2027. Shipping is established as FOB Origin under the First Destination Transportation program, with the final delivery destination located in Tracy, California. The contract mandates strict quality and compliance standards, requiring the manufacturer's inspection system to comply with ISO 9001:2015 or an equivalent standard. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging must adhere to ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, with all palletization following RP001 and marking complying with MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment processing. Additionally, the offeror must comply with various DFARS and FAR regulations, including the Buy American Act, Berry Amendment, and CMMC Level 2 Self-Assessment requirements.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7MC-27-T-1315

Solicitation SPE7MC-27-T-1315 is a small business set-aside request for quotations issued by the Defense Logistics Agency Weapons Support Maritime Hardware/Electrical for the procurement of one fluid valve stem, identified by NSN 4820-01-348-4525. The required delivery date is October 22, 2026, with shipping terms set as FOB Destination to the Nuclear Power Training Unit in Goose Creek, South Carolina. Quotations must be submitted by November 9, 2026. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003, and destination inspection is required. The contract incorporates stringent technical and security requirements, including DLA packaging requirements (RP001), MIL-STD-129 marking, and MIL-STD-2073-1E packaging standards. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring offerors to possess an approved US/Canada Joint Certification Program (JCP) certification and DLA authorization to access the data. Additionally, the procurement prohibits the use of additive manufacturing processes without prior approval and mandates compliance with DFARS cybersecurity standards, including safeguarding covered defense information and reporting cyber incidents. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system.

Defense Logistics Agency

POSTED

DEADLINE

VALVE, LINEAR, DIRECTION

Solicitation # SPE7M1-27-T-1728

Solicitation SPE7M1-27-T-1728 is a small business set-aside issued by the Defense Logistics Agency Weapons Support Maritime Supply Chain for the procurement of one linear directional control valve. The required item is identified by NSN 4820015666397 and Deere & Company part number AT345515. The contract specifies a delivery timeframe of five days after receipt of order, with an original required delivery date of September 2, 2026. Shipping is established as FOB Origin, with the final destination and inspection point located at the Distribution Management Office at MCBH Kaneohe Bay, Hawaii. The procurement is governed by strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements and MIL-STD-129 for marking. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements under RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The award process may utilize automated award mechanisms and incorporates the HUBZone price evaluation preference. Key regulatory clauses are included, such as DFARS 252.204-7012 for cybersecurity and safeguarding of defense information, as well as the Buy American and Balance of Payments Program.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

VALVE, LINEAR, DIRECT

Solicitation # SPE7L1-27-T-2909

Solicitation SPE7L1-27-T-2909, issued by the DLA Weapons Support Land Supply Chain, is for the procurement of 15 linear direct control valves, identified by NSN 4820011263316 and Astec Industries Inc part number 31F98. The contract specifies a delivery timeframe of 20 days after order, with the destination for inspection and acceptance being the USS Ft Lauderdale (LPD 28) at FPO AE 09595. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by November 9, 2026. The procurement is governed by NAICS code 332912 and includes strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. Marking and labeling must comply with MIL-STD-129, and palletization must follow RP001 requirements. Key regulatory clauses include FAR 52.246-1 for destination inspection, DFARS 252.204-7012 for cybersecurity and incident reporting, and various deviations related to sustainable products and human trafficking. Invoicing and receiving reports are to be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

VALVE, REGULATING, FLUID

Solicitation # SPE7M1-27-T-1734

Solicitation SPE7M1-27-T-1734 is a small business set-aside issued by the Defense Logistics Agency for the procurement of 15 fluid pressure regulating valves, identified as critical application items. The requirement specifies part numbers 23011063 and DAX31336 from Allison Transmission Inc, under NSN 4820010794802. Delivery is required within five days after receipt of order, with an original required delivery date of October 26, 2026. The items are to be shipped to the Anniston Army Depot in Alabama, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to quality and packaging standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with palletization governed by DLA requirement RP001. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with the Buy American Act and Berry Amendment. Additionally, the solicitation prohibits the use of additive manufacturing for the items and requires adherence to NIST SP 800-171 and DFARS cybersecurity standards for safeguarding covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

VALVE, REGULATING, FLUID

Solicitation # SPE7MC-27-T-1302

Solicitation SPE7MC-27-T-1302 is a small business set-aside issued by the Defense Logistics Agency for the procurement of two fluid pressure regulating valves, specifically NSN 4820-00-285-6125 and Watts Regulator Co part number R-119-02C. The contract specifies delivery to Soto Cano Air Base in Comayagua, Honduras, with an original required delivery date of October 23, 2026, and a delivery timeline of 20 days after order. Terms are set as FOB Origin, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 for general packaging and MIL-STD-129 for labeling, while palletization must follow DLA requirement RP001. Technical and quality requirements are governed by the DLA Master List, including the removal of government identification from non-accepted supplies. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates various FAR and DFARS clauses covering cybersecurity, domestic sourcing via the Buy American Act, and the prohibition of covered defense telecommunications equipment.

Defense Logistics Agency

POSTED

DEADLINE

HOSE ASSEMBLY, AIR DUCT

Solicitation # SPE8E9-27-T-0297

Solicitation SPE8E9-27-T-0297 is a Request for Quotations issued by the DLA Troop Support Construction and Equipment MRO Service I for the procurement of 41 units of air breathing air duct hose assemblies, identified by NSN 4240-00-770-0268. The contract requires delivery within 115 days, with a need ship date of March 5, 2027, and an original required delivery date of March 14, 2027. Delivery is FOB Origin, with the final destination being the Distribution Depot Puget Sound in Bremerton, Washington. Both inspection and acceptance will occur at the destination. The contractor must adhere to strict technical and quality requirements as specified in the DLA Master List, as well as packaging and marking standards MIL-STD-2073-1E and MIL-STD-129. Special restrictions include a prohibition on the intentional addition of mercury and a ban on items produced via additive manufacturing unless specifically authorized. The procurement is governed by various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and hazardous material identification. Quotations are due by November 9, 2026, and must be submitted to the issuing office in Philadelphia, Pennsylvania.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # N0010427QX073

Solicitation N0010427QX073, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a request for quotation for the repair of aviation components to support Foreign Military Sales cases. The scope of work includes the repair of three pneumatic motors (NSN 2895013833198, P/N 6769111) and one electronic components assembly (NSN 5998015286638, P/N 7635814). Repaired items must meet original manufacturer specifications and operational requirements, with the contractor maintaining the total equipment baseline configuration. Delivery schedules vary by line item, with some estimated by February 26, 2027, and others required within 180 calendar days of award or induction. The contract mandates strict adherence to quality and packaging standards, including ISO 9001 compliance and MIL-STD-2073-1 for military packaging. All shipments must be marked according to MIL-STD-129 and MIL-STD-130, with specific requirements for DLR labels and FMS bar coding. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system. The solicitation is not a small business set-aside and incorporates various DFARS and FAR clauses regarding cybersecurity, supply chain risk, and trade agreements. Proposals must be submitted electronically to the designated point of contact, and quotes limited solely to test and evaluation fees will not be accepted.

Navsup Weapon Systems Support Mech

POSTED

about 17 hours ago

DEADLINE

in 2 months

AI Contract Overview

The contract pertains to the procurement of a stem and disc assembly for a globe fluid valve, sized at 1 1/4 inches and classified as Class A, with the component being welded or brazed. The item is identified by NSN 4820-01-188-8700 with a single unit requirement and a delivery window of 20 days after order. The solicitation, numbered SPE7MC-26-T-140L, issued by the Defense Logistics Agency under the Department of Defense, mandates full and open competition and is governed by a suite of technical, quality, and compliance standards referenced through DLA’s Master List of Technical and Quality Requirements. Strict prohibitions are in place against the use of ozone-depleting chemicals and intentional incorporation of mercury or mercury-containing compounds, with limited exceptions for specific functional applications like batteries, sensors, or naval-referenced reagents; any use of substitutes requires prior approval. All hardware must comply with mercury containment standards per NAVSEA 5100-003D, including shock-proof design and secondary containment for portable devices. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are mapped to verification levels or AQLs based on criticality. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting dissemination to entities certified under the US/Canada Joint Certification Program and trained in handling DOD-controlled technical data. Compliance with Cybersecurity Maturity Model Certification Level 2 is required, either through self-assessment or third-party validation. The item’s manufacturing and delivery must conform to ASTM standards identified under code 81346, and all packaging and quality controls follow DLA’s RD005, RQ001, and RQ032 provisions. The point of contact for inquiries is Paula Mcclary at [email hidden], with responses due by July 27, 2026.

General Info

Procure 1¼-inch Class A welded stem and disc assembly, NSN 4820-01-188-8700, deliver in 20 days, comply with ITAR, CMMC L2, and mercury restrictions.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332912 - Fluid Power Valve and Hose Fitting Manufacturing

Place of Performance

UNIT 100148 BOX 1, FPO, AP, 96607, USA

Set-Aside

NONE

Documents

RFQ SPE7MC-26-T-140L for Maritime Hardware/Electrical

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 16

Solicitation

Response DeadlineJul 27

Deadline has passed

Submission Closed

07/27/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

Contacts

Paula Mcclary

contact@example.gov

+1 (555) 000-0000

Full Description

STEM,FLUID VALVE
STEM AND DISC ASSEMBLY,GLOBE (WELDED/BRAZED
DISC),SIZE 1 1/4 INCH,CLASS A.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
FULL AND OPEN COMPETITION APPLY
SPE7MC-26-T-140L
SECTION B
DETAILED DRAWING (ONE ITEM)
CHANGE NOTICE
ASTM..................CODE: 81346
AMERICAN SOCIETY FOR TESTING AND MATERIALS
1916 RACE STREET
PHILADELPHIA PA 19103
TELEPHONE: +1 (555) 000-0000
TELEFAX: +1 (555) 000-0000
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4820-01-188-8700 Quantity: 1 AY Purchase Request: 7016548399QTY: 1 Delivery: 20 days ADO