Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

STEM, FLUID VALVE

Awarded

SPE7MC-26-T-0182Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Contract SPE7L126P8838 was awarded by the Defense Logistics Agency Land and Maritime to XXL Transportation L.L.C. on July 8, 2026, under solicitation SPE7MC-26-T-0182. The original purchase order was for the procurement of fluid valve stems, identified by NSN 4820-01-179-8850, with a total contract value of 9,000 dollars. The award was categorized under NAICS code 332912 and included specific requirements for export control, packaging, and adherence to the First Destination Transportation program. On August 3, 2026, the contract was updated via unilateral modification P00001, signed by Contracting Officer Jason Pelfrey. This modification cancelled the order for the supplies at no cost to the government, effectively reducing the total contract amount from 9,000 dollars to 0 dollars. All other original terms and conditions remained unchanged at the time of the cancellation.

General Info

DLA awarded $9,000 to XXL TRANSPORTATION L.L.C. for STEM FLUID VALVE on July 8, 2026.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$0

NAICS

332912 - Fluid Power Valve and Hose Fitting Manufacturing

Place of Performance

IL, USA

Set-Aside

NONE

Awardee

XXL TRANSPORTATION L.L.C.

Award Issued Date

07/08/2026, 12:00:00 AM UTC

Documents

2

Modification P00001 to Contract SPE7L126P8838

2 pages · modification

High

SPE7L1-26-P-8838 Purchase Order for Stem, Fluid Valve

16 pages · award

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedJul 8

Award Notice

AwardedJul 8

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

ContactsNo contact information available

Full Description

Show more

DLA award SPE7L126P8838 posted on DIBBS. Awardee: XXL TRANSPORTATION L.L.C. (CAGE 170H9) Total Contract Price: $9,000.00 Award Date: 07-08-2026 Solicitation: SPE7MC-26-T-0182 Line items: - STEM, FLUID VALVE (NSN/Part 4820011798850, PR 7014130665)

Similar Contracts

Same NAICS industry code

Supplier of Pressure Regulating Valve Body Parts KitsThis subcontract through the Department of Defense involves the supply of four pressure regulating valve body parts kits to support DLA Weapons Support Maritime Hardware contracts. The required components must match NSN 4820009686699, specifically Kitco LLC or Meggitt North Hollywood Inc part number 26310009. Performance will take place in Cherry Point, North Carolina, under NAICS code 332912. The contract mandates strict adherence to Critical Application Item quality standards and requires that all parts meet Buy American Act domestic origin requirements. Additionally, the supplier must complete a CMMC Level 2 self-assessment to ensure cybersecurity compliance. Responses for this requirement are due by November 9, 2026.

CHERRY POINT PHANTOM RD BLDG

POSTED

about 20 hours ago

DEADLINE

Manufacture of Fluid Pressure Regulating Valves (NSN 4820014231922)This subcontract involves the manufacture and supply of two fluid pressure regulating valves under NSN 4820014231922 for the Department of Defense, specifically the DDSP New Cumberland Facility. The scope of work includes the precision machining of valve bodies and internal components, followed by assembly and functionality testing using specialized tooling to ensure all technical data specifications are met. The contractor must strictly adhere to DLA Technical and Quality Requirements as well as domestic origin standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332912. The response deadline for this requirement is November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

CRES Type 316 Gate Valve SupplierThis subcontract, issued by the Department of Defense for DLA Distribution San Joaquin, requires the manufacture or sourcing of five 1 1/4 inch CRES Type 316 gate valves. The valves must adhere to NSN 4820010853339 and Velan part W06-0054B-13MSG specifications, featuring socket weld ends, a bolted bonnet, and a stellited wedge and seat designed for 150 PSI steam. All deliverables must be fully inspected and packaged prior to delivery in Tracy, California. The contract is designated as a Total Small Business Set-Aside under NAICS code 332912. Compliance with the Buy American Act and the NAVSEA 5100-003D mercury prohibition is mandatory. Interested parties must respond by November 9, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 20 hours ago

DEADLINE

Precision Manufacturing of Flow Control Valves (NSN 4810014444743)This subcontract involves the precision manufacturing of 35 specialized flow control valves under NSN 4810014444743 for the Department of Defense in San Diego. The project supports DLA Weapons Support Maritime Hardware and Electrical initiatives, requiring the contractor to perform precision machining and assembly in strict accordance with Navy Critical Safety Item protocols. To qualify, the provider must possess AS9100 quality certification and utilize CNC machining centers. The contract mandates full compliance with CMMC Level 2 cybersecurity standards and the Berry Amendment. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332912, with a response deadline of November 9, 2026.

POSTED

about 20 hours ago

DEADLINE

Precision Ball Valve Fabrication (NSN 4820-01-701-8177)This subcontract involves the fabrication and delivery of one precision ball valve for prime contractors under the Defense Logistics Agency. The valve must be manufactured according to NSN 4820-01-701-8177 and the DLA Master List of Technical and Quality Requirements (RA001). Strict production guidelines prohibit the use of additive manufacturing, and all materials used must be compliant with the Berry Amendment. To ensure quality control, the manufacturer is required to utilize inspection systems certified under SAE AS9003 or ISO 9001. The final completed product is to be delivered FOB Origin to the NAVSEALOGCEN Warehouse Operations in Mechanicsburg. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

PARTS KIT, SAFETY RE

Solicitation # SPE7M1-27-T-1709

Solicitation SPE7M1-27-T-1709 is a small business set-aside request for quotations issued by the DLA Weapons Support Maritime Supply Chain for one safety relief valve parts kit, identified by NSN 4820-01-571-1360. The kit must include all seats, seals, and lubricants required for valve repair and is associated with part numbers from Emerson Automation Solutions, JA Moody LLC, ESI Acquisition Corp, Anderson Greenwood, and Semco Marine Svendborg. The required delivery date is March 12, 2026, with a delivery window of 20 days after the award. Inspection and acceptance will occur at the destination, and the item is to be shipped to the USS Savannah (LCS-28). The contract mandates strict adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking, specifically requiring preservation method 31 and the latest revision of MIL-STD-2073-1 Appendix D for kits. Critical compliance requirements include supply chain traceability documentation per DLA Directive Procurement Note C03 and the prohibition of additive manufacturing unless specifically authorized. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information. Quotations must be submitted via the DIBBS portal by November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

STEM, FLUID VALVE

Solicitation # SPE7M1-27-T-1706

Solicitation SPE7M1-27-T-1706 is a small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one nickel alloy fluid valve stem used on a 2.250 inch ball valve, identified by NSN 4820-01-480-0896. The requirement specifies a delivery timeline of five days after receipt of order, with shipping terms set as FOB Origin and delivery to a facility in Whitehall, Ohio. Inspection and acceptance are both required at the destination, adhering to FAR 52.246-2 and specific sampling methods including MIL-STD-1916 or ASQ H1331. The contract imposes strict compliance requirements, including DLA packaging standards RP001 and MIL-STD-2073-1E, and marking per MIL-STD-129. Technical data is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the solicitation mandates CMMC Level 2 certification and adherence to the Buy American Act and Berry Amendment. Invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

COCK, POPPET DRAIN

Solicitation # SPE7MC-27-T-0719

Solicitation SPE7MC-27-T-0719 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Hardware/Electrical for the procurement of 529 units of Poppet Drain Cocks (NSN 4820-01-306-3275). The required items must feature a Green 383 topcoat color and adhere to technical data TDP Rev B Gen 2 per SAE AS29513. This procurement is specifically set aside for certified Women-Owned Small Business (WOSB) concerns. Delivery is required within 195 days after receipt of order, with a need ship date of August 18, 2026, and a final delivery destination of DLA Distribution Red River in Texarkana, Texas. The contract imposes strict security and quality requirements, including CMMC Level 2 certification and compliance with export controls under ITAR and EAR. Eligible offerors must possess an approved US/Canada Joint Certification Program certification to access technical data. Quality assurance requires the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, respectively. Invoicing and receiving reports must be processed electronically through Wide Area WorkFlow. Offers involving additive manufacturing will not be evaluated, and all quotes must comply with the Buy American Act and the Berry Amendment.

RED RIVER RECEIVING BLDG

POSTED

about 20 hours ago

DEADLINE

VALVE, HYDRAULIC

Solicitation # SPE7MC-27-T-1277

Solicitation SPE7MC-27-T-1277 is a fixed-price request for quotations issued by DLA Weapons Support Maritime Hardware/Electrical for the procurement of hydraulic valves under NSN 4810-01-096-1054. The requirement consists of two line items totaling 129 units, with a delivery schedule of 328 days after order. This item is designated as a Navy Identified Critical Safety Item, requiring the manufacturer's quality management system to comply with SAE AS9100 or an equivalent standard. Quotes must be submitted via the DIBBS portal by November 9, 2026. The contract mandates strict adherence to domestic material restrictions, including the Berry Amendment and the Buy American Act, and prohibits the use of additive manufacturing unless specifically authorized. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with a specific prohibition on mercury or mercury compounds. Cybersecurity requirements include CMMC Level 2 certification. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system, and all contractors must register via the Account Management and Provisioning System to access the Vendor Shipment Module.

POSTED

about 20 hours ago

DEADLINE

STEM, FLUID VALVE

Solicitation # SPE7MC-27-T-1244

Solicitation SPE7MC-27-T-1244 is a fixed-price procurement issued by the DLA Weapons Support Maritime Hardware/Electrical office for the supply of two fluid valve stems and valve disks, identified by NSN 4820013401040. These components are designated as critical application items. The required delivery date is December 18, 2027, with a delivery timeline of 403 days after the award. Shipping is FOB Origin, with the destination and acceptance point located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including the DLA Master List of Technical and Quality Requirements (RA001) and specific restrictions against the intentional addition of mercury. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with various federal regulations, such as the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards. Quotations were due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

VALVE, LINEAR, DIRECTION

Solicitation # SPE7MC-27-T-1248

Solicitation SPE7MC-27-T-1248 is for the procurement of 26 linear directional control valves, identified as critical application items under NSN 4820-01-438-8375. The requirement is issued by the DLA Weapons Support Maritime Hardware/Electrical office with a required delivery date of September 24, 2027, and a delivery lead time of 318 days after order. The items are to be delivered FOB destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. This procurement is designated as a total small business set-aside under FAR 19.5, and all quotes must be submitted via the DLA Internet Bid Board System by November 9, 2026. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking and labeling, RP001 for palletization, and ASTM D3951 for general packaging, though the DLA Master List of Technical and Quality Requirements takes precedence. Inspection and acceptance will occur at the destination per FAR 52.246-2. Key regulatory requirements include compliance with the Buy American Act and Balance of Payments Program, as well as cybersecurity standards for safeguarding covered defense information. Invoicing must be processed electronically through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

STEM, FLUID VALVE

Solicitation # SPE7MC-27-T-1258

Solicitation SPE7MC-27-T-1258 is a request for quotations from DLA Weapons Support Maritime Hardware/Electrical for the procurement of three stainless steel fluid valve stems. The required items are identified by NSN 4820012299726 and part number 12600001107 from Anderson Greenwood LP, featuring a nominal overall length of 2.5 inches. This is designated as a critical application item, and the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA. Delivery is required within 56 days after receipt of order, with an original required delivery date of October 24, 2026, and a need ship date of January 5, 2027. The items are to be delivered FOB Destination to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will also occur at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001, with specific requirements for bag fabrication per MIL-B-117. The procurement incorporates various federal regulations, including the Buy American Act and the Berry Amendment for domestic sourcing. Contractors must utilize the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. Cybersecurity compliance is required under DFARS 252.204-7012 for safeguarding covered defense information. Quotations are due by November 9, 2026, to the issuing office in Columbus, Ohio.

DLA DIST SAN JOAQUIN

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 20 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 20 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 20 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 20 hours ago

DEADLINE

HazMat Freight Forwarding and DeliveryThis subcontract for HazMat Freight Forwarding and Delivery involves the transportation of hazardous sealing compound kits for prime contractors supporting Defense Logistics Agency Troop Support supply contracts. The scope of work requires the delivery of 24 kits FOB Destination to Langley Air Force Base in Virginia and Joint Base Elmendorf-Richardson in Alaska. To ensure product integrity, all materials must be transported in refrigerated or climate-controlled vehicles that maintain temperatures below 80 degrees Fahrenheit. The selected provider must possess DOT Hazardous Materials certification and obtain the necessary base access clearances for the specified military installations. All deliveries must be completed within a strict five-day window. This opportunity falls under NAICS code 484220 and is managed through the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

COVER, VALVE INDICAT

Solicitation # SPE4A5-26-T-192E

Defense Logistics Agency

POSTED

DEADLINE

POPPET, SOLENOID VAL

Solicitation # SPE7MC-26-T-036J

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-122B

Defense Logistics Agency

POSTED

CLOSED

VALVE, RELIEF, PRESSU

Solicitation # SPE7L4-26-T-5237

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7MC25P2355

Defense Logistics Agency

POSTED

DEADLINE

VALVE, REGULATING, FL

Solicitation # SPE7MC-26-T-112U

Defense Logistics Agency

POSTED

DEADLINE

VALVE, SOLENOID

Solicitation # SPE7MC-26-T-106C

Defense Logistics Agency

POSTED

DEADLINE

VALVE, PNEUMATIC TIR

Solicitation # SPE7L7-26-T-3015

Defense Logistics Agency

POSTED

DEADLINE

VALVE, BLEEDER, HYDRA

Solicitation # SPE7MC-26-T-8274

Defense Logistics Agency

POSTED

DEADLINE

Specialty Construction Material Supply

255-NETWORK Contract Office 15 (36C255)

POSTED

CLOSED

48--VALVE,LINEAR,DIRECT

Solicitation # SPE7MC26T9649

DLA Land And Maritime

POSTED

DEADLINE

48--VALVE,REGULATING,FL

Solicitation # SPE7MC26T012E

DLA Land And Maritime

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS