Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

STEM, FLUID VALVE

Active
SPE7M1-26-T-322KFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 20 units of fluid valve stems, identified by NSN 4810012295516 and part number 20538 from Real-Time Laboratories, LLC. The item is designated as a critical application and a restricted source item, requiring engineering source approval by the government design control activity. Delivery is required within five days, with the final destination and inspection point set at the Anniston Army Depot in Alabama. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. It explicitly prohibits the use of Class I ozone-depleting substances and the intentional addition of mercury or mercury-containing compounds, except in specific functional cases defined by NAVSEA. All configuration changes must be managed through engineering change proposals or requests for variance.

General Info

Procurement of 20 fluid valve stems from Real-Time Laboratories for Anniston Army Depot.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

332912 - Fluid Power Valve and Hose Fitting ManufacturingView NAICS

Place of Performance

7 FRANKFORD AVE, ANNISTON, AL, 36201-5021, USA

Set-Aside

NONE

Documents

(1)

SPE7M1-26-T-322K.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
Misty Eckard
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STEM,FLUID VALVE
STEM, FLUID VALVE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NOTE: THIS IS A RESTRICTED SOURCE ITEM AND
REQUIRES ENGINEERING SOURCE APPROVAL BY THE
GOVERNMENT DESIGN CONTROL ACTIVITY.
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
REAL-TIME LABORATORIES, LLC 62319 P/N 20538
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE7M1-26-T-322K
SECTION B
PR: 7018116087 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018116087 0001 EA 20.000
NSN/MATERIAL:4810012295516
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:100
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
MARKFOR
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
SPE7M1-26-T-322K
SECTION B
PR: 7018116087 PRLI: 0001 CONT’D
ANNISTON AL 36201-5021
US
M/F: (TCN) W31G1Y623800I7
RDD: 245
PROJ: TP 1
SUPP ADD: W31G1Y SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2L FC: VE
Need Ship Date:00/00/0000 Original Required Delivery Date:08/31/2026
SPE7M1-26-T-322K NSN/Part Number: 4810-01-229-5516 Quantity: 20 EA Purchase Request: 7018116087QTY: 20 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332912
New
Federal
HYDRAULIC VALVE
Solicitation # W911S226U4369
The Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, is soliciting bids for the procurement of hydraulic bleeder valves under solicitation number W911S226U4369. This combined contract opportunity is designated as a total small business set-aside and falls under NAICS code 332912. Interested parties must submit their responses by the deadline of September 11, 2026, at 3:00 PM. The primary point of contact for this requirement is Cindy Jepsen. Performance for this contract is associated with zip code 61299.
W6QM Micc-Ft Drum

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332912
New
Federal
48--VALVE,REGULATING,FL
Solicitation # SPE7M426T379J
DLA Land And Maritime

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
Federal
MARINE COMPOSITE FUEL TRANSFER HOSES FOR NAVSTA ROTA, SPAIN
Solicitation # N6817126QT023
Solicitation N6817126QT023 is a combined synopsis and request for quotation issued by the Department of Defense, specifically the Navsup Flc Sigonella Naples Office, for the procurement of replacement flexible marine composite fuel transfer hoses at Naval Station Rota, Spain. These hoses are essential for the safe and continuous transfer, storage, and distribution of JP-5, JP-8, and F76 petroleum products between barges, ships, piers, and bulk storage locations. The acquisition is not set aside for small business concerns and is conducted under FAR Part 12 for commercial products. The requirement consists of fourteen total hose assemblies, including six 6-inch by 50-foot hoses, six 8-inch by 50-foot hoses, and two 8-inch by 25-foot hoses. All assemblies must meet strict material, flange, and electrical continuity standards, including compliance with BS 5842, EN 13765, and USCG regulations. Contractors must provide hydrostatic, vacuum, and electrical continuity certification reports with full traceability. Delivery is required within 28 calendar days of award on a FOB Destination basis. Evaluation will be based on price, technical compliance, and past performance, with a response deadline of September 4, 2026.
Navsup Flc Sigonella Naples Office

POSTED

about 6 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVE
Solicitation # SPE7MC-26-T-245S
This contract is for the procurement of one nickel alloy fluid valve stem, identified as NSN 4820011531557 and Tescom Corp part number 510-51. The item is designated as a critical application item used in 0.25 inch relief valves and requires a forging process for manufacture. The delivery is set for 20 days after the order, with a required delivery date of August 28, 2026, shipping FOB Origin to the Trident Refit Facility in Kings Bay, Georgia. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 for marking. It includes specific environmental restrictions prohibiting the intentional addition of mercury or mercury-containing compounds, except for specified functional exceptions. Additionally, the supplier must comply with CMMC Level 2 self-assessment requirements and follow the DLA Master List of technical and quality requirements.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
VALVE, FLOW CONTROL
Solicitation # SPE7M1-26-T-322Y
This contract is for the procurement of one flow control valve, part number FR08-20F-0-N-1.0, manufactured by Fluid System Components, Inc. under NSN 4820015790976. The order is issued by the Department of Defense Maritime Supply Chain with a required delivery date of September 2, 2026, and a delivery timeframe of five days after the order. The shipment must be delivered FOB Origin to the DLA LMP Zone 1 facility in Texarkana, Texas, using the fastest traceable means. Packaging must comply with ASTM D3951, MIL-STD-129, and DLA packaging requirements, with the DLA Master List of Technical and Quality Requirements taking precedence. Inspection and acceptance will occur at the destination.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
VALVE, LINEAR, DIRECTION
Solicitation # SPE7MC-26-T-245X
This contract, identified as SPE7MC-26-T-245X, is a procurement request by the Defense Logistics Agency for two linear directional control valves. The required items are specified as Deere and Company part number T123940 and National Stock Number 4820014299596. Delivery is required within 10 days after order, with a required delivery date of August 27, 2026. The shipment is to be delivered FOB Origin to the Louisiana Army National Guard in Shreveport, Louisiana. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements. Technical and quality standards are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLUID
Solicitation # SPE7MC-26-T-246N
This contract is for the procurement of three fluid pressure regulating valves with aluminum alloy bodies and an outlet pressure range of 13 to 20 PSI. The items are identified by NSN 4820008725290 and part numbers PRAN-2 13T20PSI and Y201576501 from Leslie Controls, Inc. This is designated as a critical application item with a non-extendable shelf life of 60 months. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. It prohibits the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except where specified by NAVSEA. Delivery is set for 679 days after order, with a required delivery date of July 25, 2028, to DLA Distribution San Joaquin in Tracy, California. Shipping is FOB Origin with inspection and acceptance occurring at the destination.
DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
FITTING, LUBRICATION
Solicitation # SPE7M3-26-T-8780
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
VALVE, LINEAR, DIRECTION
Solicitation # SPE7M1-26-T-324A
This contract, identified as SPE7M1-26-T-324A, is a solicitation for the procurement of one linear directional control valve, specifically Deere and Company part number AT345515 with NSN 4820015666397. The order is managed by the Department of Defense Maritime Supply Chain and requires delivery within five days. The shipment is designated as an NMCS priority and is to be delivered FOB Origin, with inspection and acceptance occurring at the destination. The supplier must adhere to strict technical and quality standards, including DLA packaging requirements RP001 and marking standards MIL-STD-129. The item is to be shipped to the Distribution Management Office at MCBH KANEOHE BAY, HI. All packaging and palletization must comply with the specified military standards and DLA master lists to ensure proper government acceptance.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
Federal
MQ-25 Oil Drain Attachment
Solicitation # N6833526Q1191
Solicitation N6833526Q1191 is a competitive procurement for Oil Drain Attachments, part number 4106AS0315-1 and national stock number 4720-01-733-4712, to support the MQ-25 Stingray Unmanned Aircraft Systems Program. Issued by the Department of Defense through the Navair Warfare Ctr Aircraft Division, this requirement is designated as a total small business set-aside under NAICS code 332912. The government intends to award a single-award, fixed-price, three-year Indefinite Delivery/Indefinite Quantity contract. Amendment 0001 has extended the quotation submission deadline from August 31, 2026, to September 1, 2026, at 4:00 PM EDT. Interested offerors must be registered in the System for Award Management and submit their proposals via the Procurement Integrated Enterprise Environment solicitation module. Additionally, the procurement involves export-controlled technical data, requiring the submission of DD Form 2345 to request the technical data package.
Navair Warfare Ctr Aircraft Division

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332912
New
Federal
TRIM/ DRAIN TEST BOX
Solicitation # N0018926QL360
This solicitation, numbered N0018926QL360, is issued by the Department of Defense through the Navsup Flt Logistics Ctr Norfolk for the procurement of a Trim/Drain Test Box. The project falls under NAICS code 332912 and is open to all qualified bidders as there is no specific set-aside designated for this requirement. The solicitation was posted on September 1, 2026, with a response deadline of September 4, 2026, at 2:00 PM. While the contracting office is located in Norfolk, Virginia, the place of performance is specified as Groton, Connecticut. Primary contact for this opportunity is Stuart Davis, with Robert Babcock serving as the secondary point of contact.
Navsup Flt Logistics Ctr Norfolk

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332912
New
Federal
48--VALVE,REGULATING,FLUID
Solicitation # SPE7MC26T247N
DLA Land And Maritime is seeking quotes for the procurement of 15 fluid regulating valves under National Stock Number 4820014699499. The contract, identified by solicitation number SPE7MC26T247N, requires delivery to DLA Distribution within 168 days after the order is placed. Approved sources for this item include 62144 10500 PC 15 and 62144 10584. This is a combined solicitation under NAICS code 332912, and all responsible sources are invited to submit electronic quotes. The deadline for responses is September 14, 2026. No hard copies of the solicitation or technical drawings are available, and all submissions must be handled electronically through the provided procurement channels.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 444180
New
DIBBS
NRP, LAMP, MARKER YEL
Solicitation # SPE7M1-26-T-268S
The contract pertains to the procurement of 28 units of NRP, LAMP, MARKER YELLOW with NSN 5960016136117 under solicitation SPE7M1-26-T-268S, issued by the Department of Defense’s Maritime Supply Chain. Delivery is required within 165 days after order placement, with shipment FOB origin to the final destination at the DLA Distribution New Cumberland Facility in New Cumberland, PA. Inspection and acceptance occur at the destination, and all packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods (Clng/Dry: 1), unit containers (D3), intermediate containers (E5), and a packaging code of U. Marking must adhere to MIL-STD-129 with a special fragile marking code 36-36 indicating “Fragile, arrow up and glass.” The item is classified as a critical application item and is subject to all applicable DLA packaging and shipping requirements, including compliance with DFARS clause 252.223-7001 for hazardous material labeling and 252.247-7023 for sea transportation. The contract mandates electronic invoicing exclusively through Wide Area WorkFlow, and cybersecurity protections are enforced via DFARS clauses 252.204-7012 and 252.240-7997, requiring NIST SP 800-171 controls and cyber incident reporting. Contractors must be registered in SAM, possess a valid UEI, and comply with all socioeconomic representations, including small business status and prohibitions on acquiring covered telecommunications equipment from foreign adversaries. Payment is subject to accelerated terms for small business subcontractors, and any contractual modifications must follow prescribed pricing protocols. The solicitation closed on August 20, 2026, and awards are expected under a fixed-price structure with zero variance allowed in quantity. All technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, and the contract incorporates FAR and DFARS clauses covering inspection, delivery, liability, representations, and contractor cybersecurity obligations without exception.
Other Building Material Dealers

POSTED

about 1 hour ago

DEADLINE

in 2 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, COMP
Solicitation # SPE7M1-26-U-5250
This solicitation, issued by DLA Land and Maritime under the Maritime Supply Chain, is a Request for Quotations for a one-year Indefinite Delivery Contract (IDC) for fixed resistors (NSN 5905-01-613-2994). The contract has a maximum value of $350,000 and involves an estimated annual demand of 40,000 units, though the specific line item for 40 units is noted as an estimate that may not be purchased. The procurement is conducted below the simplified acquisition threshold and utilizes the First Destination Transportation program to manage costs. Quotations are due by August 27, 2026, and offerors are encouraged to provide quantity ranges to account for demand volatility. The contract includes rigorous technical, quality, and packaging requirements. Suppliers must adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. A critical requirement is the application of IPC/JEDEC J-STD-609 standards to individual unit packs to identify lead and lead-free attributes. Additionally, the contract prohibits the intentional addition of mercury to hardware and requires specific labeling for hazardous materials. Compliance with the Buy American Act and the Berry Amendment is mandatory, and contractors must meet cybersecurity standards regarding the safeguarding of covered defense information. Inspection and acceptance will occur at the destination.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SOLENOID
Solicitation # SPE7M1-26-T-322J
This contract is for the procurement of four solenoid valves designed for air media, operating at 120 VAC, 60 HZ, with a pressure rating of 1000 PSI. The items are identified by NSN 4810013057844 and correspond to Ingersoll-Rand part numbers 32039778 and W136255T1-12. This is designated as a critical application item with a required delivery date of September 2, 2026, and a delivery window of five days. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions are in place prohibiting the intentional addition of mercury or the use of Class I ozone-depleting substances unless specifically approved. Shipping is designated as FOB Destination to the USNS Impeccable via the fastest traceable means, explicitly prohibiting the use of parcel post.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7M1-26-T-322Q
This contract is for the procurement of one check valve, identified by NSN 4820013464646 and part number 046-5160-000 from Hale Products, Inc. The order is managed under solicitation SPE7M1-26-T-322Q for the Department of Defense Maritime Supply Chain. Delivery is required within five days of order, with a required delivery date of September 2, 2026. The item is to be shipped FOB Origin to the Depot Street Receiving Warehouse at Fort Irwin, California. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129, with packaging following ASTM D3951. Quality and technical standards are governed by the DLA Master List, including specific requirements for higher-level quality and the removal of government identification from non-accepted supplies. Inspection and acceptance will take place at the destination.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 333912
New
DIBBS
COMPRESSOR, RECIPROC
Solicitation # SPE7M1-26-T-324E
This contract is for the procurement of one reciprocating compressor, identified by NSN 4310016487405 and part number 3624500C92. The item is designated as a critical application item and must be delivered to Naval Construction Group One in Port Hueneme, California, within 20 days. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, as well as DLA packaging requirements for procurement. A critical environmental restriction prohibits the use of Class I ozone-depleting chemicals in the delivered items. Shipping must be completed via the fastest traceable means, and the use of parcel post is explicitly forbidden.
Air and Gas Compressor Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334412
New
DIBBS
RETAINER-EJECTOR, ELECT
Solicitation # SPE7M1-26-T-259N
This contract is for the procurement of 78 units of electrical card ejector retainers, identified by NSN 5998016849164 and part number 1032934-001 from DRS Network and Imaging Systems LLC. The acquisition is managed by the Department of Defense Maritime Supply Chain under solicitation SPE7M1-26-T-259N. Delivery is required within 168 days, with a need ship date of February 2, 2027, and a final required delivery date of June 22, 2027. The agreement specifies that the items are critical application components and must adhere to strict technical and quality requirements, including covered defense information and DLA packaging standards. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination. All materials must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, following MIL-STD-129 marking and MIL-STD-2073-1E packaging guidelines.
Bare Printed Circuit Board Manufacturing

POSTED

1 day ago

DEADLINE

in about 23 hours
View Details
NAICS: 334412
New
DIBBS
PRINTED CIRCUIT BOA
Solicitation # SPE7M1-26-T-279X
This contract is for the procurement of one printed circuit board, identified by NSN 5998016027163 and part number 320193-P3 from Testek LLC. The order is managed under solicitation SPE7M1-26-T-279X with a required delivery date of July 27, 2027, and a delivery window of 336 days. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements and cybersecurity standards, including CMMC Level 2 self-assessment and the protection of covered defense information. Because the item is an ESD-sensitive electronic device, it requires specialized protective packaging in accordance with MIL-PRF-81705 and MIL-STD-129. Suppliers must ensure that all barrier materials are sourced from qualified manufacturers on the QPL-81705 list to prevent damage to leads and terminals during transport.
Bare Printed Circuit Board Manufacturing

POSTED

1 day ago

DEADLINE

in about 23 hours
View Details
NAICS: 335999
New
DIBBS
DISTRIBUTION BOX
Solicitation # SPE7M1-26-T-324G
This solicitation is for the procurement of one distribution box under full and open competition for the Department of Defense Maritime Supply Chain. The contract requires strict adherence to a source controlled drawing, meaning only approved sources listed on the drawing are currently authorized to provide the item. All furnished products must meet the specific requirements of the cited drawing, and any offerors seeking to qualify new products must contact the cognizant design activity. Additionally, the use of Class I ozone depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval. The contract includes rigorous compliance standards, including CMMC Level 2 cybersecurity assessments and DLA packaging requirements. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific training to access the data. Delivery is required within 10 days after receipt of the order. The solicitation is managed by the Defense Logistics Agency with a performance location in Twentynine Palms, California.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
BALL, VALVE, PORTED
Solicitation # SPE7M1-26-T-322T
This contract is for the procurement of one ported ball valve, identified by NSN 4820014819159 and part number 863-210120 from Guild Associates Inc. The item must be manufactured in accordance with Technical Data Package Revision A and reference drawing 4X630 863-210120 Revision B. Delivery is required within five days after the order, with a final required delivery date of September 2, 2026. The shipment must be delivered FOB Origin to the Sierra Army Depot in Herlong, California, using the fastest traceable means of transport. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements under RP001. The contract is subject to specific technical and quality requirements, including configuration change management and the removal of government identification from non-accepted supplies.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, BALL VALVE
Solicitation # SPE7M1-26-T-323N
This contract, identified as SPE7M1-26-T-323N, is for the procurement of three ball valve parts kits, specifically part number 65481000 from Elkhart Brass Manufacturing Company. The order is associated with NSN 4810-01-664-6625 and requires delivery within five days. The terms specify FOB Origin for delivery, with both inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1 Appendix D for kits. All loose hardware must be secured in sealed containers to prevent corrosion or damage, and bulk shipping is explicitly prohibited. Each kit must include a detailed parts list containing the part name, number, and quantity. Technical and quality requirements are governed by the DLA Master List, and any government identification must be removed from non-accepted supplies per requirement RQ011.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7M1-26-T-323C
This contract is for the procurement of two safety relief valves, identified by NSN 4820015790930 and part number RV10-26H-0-N-15/15 from Fluid System Components, Inc. The order is managed under solicitation SPE7M1-26-T-323C for the Department of Defense Maritime Supply Chain, with a required delivery date of September 2, 2026. Delivery is required within five days after the order is placed, with the shipping terms set as FOB Origin and the inspection and acceptance points located at the destination. The items must be shipped via the fastest traceable means to the DLA LMP Zone 1 facility in Texarkana, Texas. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements RP001 and the master list of technical and quality requirements. The contract specifies a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details