Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

STEM, FLUID VALVE

Active
SPE7MC-26-T-157CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of one STEM fluid valve with NSN 4820-01-508-6185 and part number HBV-M2-14-0008, issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-157C. Delivery is required within 20 days of contract award, with the item to be shipped FOB destination to the USS NEW ORLEANS LPD 18 at FPO AP 96673, as specified by the parcel post address. The quantity is fixed at one unit with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 packaging requirements, and all technical and quality standards from the DLA Master List of Technical and Quality Requirements take precedence over any other criteria. The unit of issue is each (EA), with a total price of $1.00, and the item must be delivered no later than July 23, 2026, with the original response deadline for the solicitation set for August 10, 2026. The shipment requires adherence to DLAD Procedure Notes C19 and C20, and government-specific identifiers must be removed from any non-accepted supplies. The vendor must use the VSM system for RDD 777 shipments, and all labeling and marking must reflect the specified U/I and QUP as defined in the contract, with the point of contact being Paula Mcclary at the DLA.

General Info

One STEM fluid valve, NSN 4820-01-508-6185, $1.00, FOB destination, delivery by July 23, 2026, to USS NEW ORLEANS LPD 18.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332912 - Fluid Power Valve and Hose Fitting ManufacturingView NAICS

Place of Performance

UNIT 100207 BOX 1, FPO, AP, 96673, US

Set-Aside

NONE

Documents

(1)

SPE7MC-26-T-157C.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STEM,FLUID VALVE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
B N L INDUSTRIES INC 0AZ22 P/N HBV-M2-14-0008 ITEM 5
B N L INDUSTRIES INC 0AZ22 P/N HBV-M2-14-0008-05
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017639035 0001 EA 1.000
NSN/MATERIAL:4820015086185
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE7MC-26-T-157C
SECTION B
PR: 7017639035 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
R23168
USS NEW ORLEANS LPD 18
UNIT 100207 BOX 1
FPO AP 96673
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R23168
USS NEW ORLEANS LPD 18
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
M/F: (TCN) R2316862020151
RDD: 777
PROJ: LE5 TP 2
SUPP ADD: YA261L SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A41 DIST: 9B ADV: FC: NR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/23/2026
SPE7MC-26-T-157C NSN/Part Number: 4820-01-508-6185 Quantity: 1 EA Purchase Request: 7017639035QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332912
New
DIBBS
SERVOVALVE, HYDRAULIThe contract pertains to the procurement of two hydraulic servovalves, part number 22253980 manufactured by Woodward HRT Inc, identified by NSN 1650013246862, under solicitation SPE4A5-26-T-310W. Delivery is required within 20 days of contract award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at origin, and packaging must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special markings required. Palletization follows DLA packaging requirements, and the shipment is destined for the Taiwan Army at Zuo-Ying Ammunition Sub in Kaohsiung City. The item is classified as a critical application item with controlled technical and quality inputs referenced from the DLA Master List of Requirements, and compliance with cybersecurity standards is mandated via CMMC Level 2 self-assessment. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes default to major status. The contract stipulates that acceptance requires zero non-conformances in the sample lot unless otherwise directed. Documentation for source approval and removal of government identification from non-accepted items must be completed per applicable provisions. The unit of issue is each, and the item is subject to defense information controls. The solicitation was posted July 28, 2026, with a response deadline of August 5, 2026, and the original required delivery date is July 30, 2026. The point of contact is Jason Balsiger of the Department of Defense.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLThe contract pertains to the procurement of one regulating valve for fluid pressure, identified by NSN 4820-01-349-9054 and referenced under purchase request 7017644030, with a required delivery within ten days of contract award. The item must be supplied by either Curtiss-Wright Electro-Mechanical Corp or Siemens Government Technologies, with approved part numbers 7378E65 and B1106J23, and must comply fully with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging and labeling must adhere strictly to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization specified under RP001 and no tolerance permitted for quantity variance. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item must be shipped to Storck Barracks Building 6503 in Illesheim, Germany, under shipment reference RDD 777 and transportation instructions DLAD PROC NOTE C19 and C20. The contract is governed under solicitation SPE7MC-26-T-156L, issued by the Defense Logistics Agency, with a required delivery date of July 24, 2026, and the point of contact for inquiries is Paula Mcclary at the provided DLA email and phone number.
Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLThe contract pertains to the procurement of one regulating fluid pressure valve identified by NSN 4820-01-507-0745 and part number 30804995 from Warren Controls, Inc., under solicitation SPE7MC-26-T-157E. Delivery is required within 20 days to two separate military destinations — USS JOHN P. MURTHA LPD 26 and USS ANCHORAGE LPD 23 — with FOB destination terms and no variance allowed in quantity. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization aligned to DLA’s RP001 requirements, and all labeling and marking must adhere to government standards. The DLA Master List of Technical and Quality Requirements takes precedence over any other specification. The valve must not contain or come into direct contact with mercury unless exception applies for functional uses such as batteries, instruments, or weapon systems, and any portable devices containing mercury must have shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The supply is to be shipped by the fastest traceable means, explicitly prohibiting parcel post. The unit of issue is each, with a unit price of one dollar per unit and a total price of one dollar per line. All deliveries must be routed through designated DLA vendor systems using the provided military freight addresses and traceability codes, and the original required delivery date is July 23, 2026.
Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332912
New
DIBBS
MASTER CONTROL ASSEMBLThe contract pertains to the procurement of two units of the Master Control Assembly, Hydraulic, identified by NSN 3895-01-226-6156, under solicitation SPE8EE-26-Q-0409, with a required delivery within 90 days of award. The item is subject to stringent technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the provided DLA website, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or its direct contact, except where functionally necessary in specified applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; in such cases, portable devices must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and all packaging must comply with DLA packaging requirements. The solicitation was posted on July 28, 2026, with responses due by August 4, 2026, and is managed by the Department of Defense under the Construction & Equipment Manu & Con organization, with Chase Quigley designated as the primary point of contact.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332912
New
DIBBS
ADAPTER, TRANSPORTATATIThis contract is for the procurement of four adapters for transportation, identified by NSN 4920-01-128-3121, under solicitation SPE4A5-26-T-310U, issued as a total small business set-aside. The unit price is four dollars per unit, with a total contract value of sixteen dollars. Delivery is required within 164 days, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the origin, and the items must comply with MIL-STD-2073-1E packaging standards, including specific packaging codes, materials, and unit container specifications. Marking must adhere to MIL-STD-129, with no special marking required. Palletization must follow DLA packaging requirements. The adapter is classified as a critical application item, and its design and manufacturing must conform to multiple referenced technical drawings and quality assurance provisions, including revisions dated between 2004 and 2015. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stipulated in the contract. Quality requirements are governed by DLAs Master List of Technical and Quality Requirements, and source approval documentation must be submitted per RC001. The item has no shelf life constraint, and unit identification is not required under DFARS 252.211-7003(c)(1)(i). All equipment used for measurement and testing must meet RT001 standards. Delivery is due by January 17, 2027, with the original required delivery date set for June 19, 2027, and the shipment must be sent to the receiving facility in Texarkana, Texas. The contract includes compliance with DLA transportation and freight procedures C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332912
New
Federal
Hose Assembly SOC
DLA Maritime - Portsmouth

POSTED

about 11 hours ago

DEADLINE

in 19 days
View Details
NAICS: 332912
New
DIBBS
Supply of Fluid Pressure Regulating Valve (NSN 4820016206304)The contract outlines the procurement of a single Fluid Pressure Regulating Valve identified by NSN 4820016206304, which must meet all technical standards established by the Defense Logistics Agency. Delivery is required FOB destination to the USS TRIPOLI, with a strict deadline of 20 days from the date of award. The item falls under NAICS code 332912, indicating it is related to other fabricated metal product manufacturing. The solicitation was posted on July 27, 2026, with responses due by July 30, 2026, and is classified as a subcontract under the Department of Defense. The place of performance is listed as FPO with zip code 96694-2900, indicating delivery to a military vessel operating at sea. All contractual obligations are governed by DLA specifications and timelines, with no set-aside provisions applied.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332912
New
DIBBS
Precision Valve Manufacturing and SupplyThe contract calls for the manufacture and supply of a fluid pressure regulating priority valve engineered to meet stringent military-grade standards for performance, durability, and traceability within hydraulic or pneumatic systems. The valve must be built to operate reliably under extreme conditions, ensuring precise pressure control and system integrity critical to defense applications. All components and manufacturing processes must adhere to rigorous documentation and quality control protocols to support full lifecycle traceability and compliance with defense procurement requirements. The solicitation, issued by the Fluid Handling Division of the Department of Defense, is classified as a subcontract under NAICS code 332912 and requires proposals to be submitted by July 30, 2026. The place of performance is set at Tracy, California, with a ZIP code of 95304-5000, indicating the location where deliverables must be fulfilled or inspected. The timeframe is highly compressed, with a response deadline just three days after posting, signaling an urgent operational need. This effort supports critical defense infrastructure, and suppliers must demonstrate capability in high-reliability precision valve production with proven experience in military or aerospace environments.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVEThis contract is for the procurement of a STEM fluid valve with the NSN 4820-01-029-9238, requiring 17 units to be delivered within 164 days under solicitation SPE7M4-26-T-287U. The items are specifically identified as Curtiss-Wright electro-mechanical part numbers 3009G58, 3009G58-001, 781E827P41, and 958E350, classified as critical application items. The contract strictly prohibits the intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment barrier as per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, utilizing approved methods including preservative treatment AE, class 1 packaging material, GC wrapping, and EC unit containers without intermediate containers, with parcel post and freight shipping directed to DLA Distribution at the New Cumberland, PA facility. Delivery is FOB origin with zero variance permitted in quantity, and inspection and acceptance occur at destination. The contract includes adherence to DLA packaging requirements and references the DLA Master List of Technical and Quality Requirements for applicable technical and quality standards identified by R or I numbers. The purchase price is $17.00 per unit for a total of $289.00, with a required ship date of January 19, 2027, and an original delivery deadline of October 15, 2027.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
VALVEThe contract solicitation SPE7M1-26-T-210D seeks the procurement of two brass body, stainless handle, 3/4 inch port pneumatic valves with NSN 4820016024464, to be delivered within five days of award to the Distribution Management Office in Jacksonville, Florida. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence over this standard, and palletization must follow RP001: DLA Packaging Requirements for Procurement. All packaging and labeling shall comply with MIL-STD-129, including barcoding per GS1 DataBar or USS-128 standards, with unit of issue and quantity per unit pack strictly adhering to contract specifications. The valve must not contain mercury or mercury compounds except in functional applications such as batteries, fluorescent lamps, sensors, or instruments, and any mercury-containing portable devices must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. Delivery is FOB origin, inspection and acceptance occur at destination, and no quantity variance is permitted. The contract mandates electronic invoicing through WAWF and prohibits the use of parcel post, requiring shipment by the fastest traceable means. The solicitation incorporates multiple Federal Acquisition Regulation clauses covering equal opportunity, combating human trafficking, employment eligibility verification, sustainable procurement, hazardous materials identification, contract type, small business representation, intellectual property, cyber incident reporting, safeguarding defense information, whistleblower rights, prohibition of hexavalent chromium and toxic materials, and restrictions on defense telecommunications equipment. Offerors must provide their Unique Entity Identifier and CAGE code, and represent their small business status, including any socioeconomic designations such as WOSB, HUBZone, or SDVOSB, and disclose any involvement with covered defense telecommunications equipment. No contract price is listed in the line item, and the basis of award is presumed to be Lowest Price Technically Acceptable given the simplified nature of the acquisition and absence of complex evaluation factors. The response deadline is July 27, 2026, with deliveries due by July 14, 2026, and all proposals must be submitted electronically via DIBBS. No contract options, key personnel requirements, or security clearances are specified, and no attachments or special requirements beyond those detailed in the packaging, labeling, materials, and compliance clauses are present.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332912
New
DIBBS
HOSE ASSEMBLY, METALLICThe contract specifies the procurement of a metallic hose assembly designed for use between the gearbox and hydromechanical unit, identified by NSN 4720-01-333-0378, with a quantity of 77 units required. This item is classified as a U.S. Army flight safety part and is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The procurement is governed by DLA packaging standards, supply chain traceability obligations under DLA Directive Procurement Note C03 from August 2016, and mandatory configuration change management procedures requiring formal engineering change proposals for any deviations. All supplied items must be properly marked for physical identification, and contractors must retain full traceability documentation throughout the supply chain. Technical data associated with this assembly is subject to export controls under ITAR or EAR, restricting any disclosure or transfer to foreign persons or entities without prior authorization from the Department of State or Commerce; only DLA-approved contractors with JCP certification, completed export control training, and approved access permissions may handle such data. The solicitation, issued under number SPE7M4-26-Q-0887, is a total small business set-aside with a response deadline of August 10, 2026, and requires delivery within 493 days after order. Point of contact for inquiries is Glenda Gustafson of the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLThe contract pertains to the procurement of five regulating valves for fluid pressure, each with a 1-1/4 inch size, designed for use with salt water at a maximum pressure rating of 250 psi and an outlet pressure range of 25 to 60 psi. All materials must be mercury-free except for seat rings, which are exclusively permitted to be manufactured from Monel alloy QQ-N-281 Class A or Nickel-Copper-Silicon alloy ASTM A494/A494M M25S. The valves must be produced using a metal casting process requiring specialized tooling, and compliance with the latest revision of Federal Specification MIL-V-3 is mandatory for preservation and packaging. Packaging requirements follow MIL-STD-2073-1E, with preservation method code ZZ requiring Level A preservation as defined in the commodity specification, and marking must conform to MIL-STD-129 with no special markings required. The product is designated by NSN 4820-01-313-7667 and must be delivered FOB origin to the DLA Distribution facility at DDSP New Cumberland, PA, within 104 days after order placement, with a required ship date of February 4, 2025. No quantity variance is permitted. The contract prohibits the intentional use of mercury or mercury-containing compounds unless functionally essential in batteries, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, in which case a second containment boundary is mandatory per NAVSEA 5100-003D. Ozone-depleting chemicals are banned, and hazardous materials must be labeled in accordance with 29 CFR 1910.1200 and DFARS 252.223-7001, with Safety Data Sheets submitted pre-award. Radioactive materials exceeding specified thresholds require prior notification and labeling. The acquisition is a total small business set-aside under FAR 19.5, with NAICS code 332912. Payment must be submitted electronically via Wide Area WorkFlow, and the contractor is subject to multiple DFARS and FAR clauses including cybersecurity safeguards, combating trafficking in persons, employment eligibility verification, sustainable products, and prohibitions on hexavalent chromium and covered defense telecommunications equipment. The offeror must provide a Unique Entity ID and CAGE code and affirm small business status, including any applicable socioeconomic designations.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Covered Contractor SystemsThe contract requires the implementation and documentation of cybersecurity controls aligned with NIST SP 800-171 for all systems handling covered defense information, including technical data, delivery schedules, and compliance reports. This effort is critical to ensure the protection of sensitive government information and must be completed according to federal cybersecurity standards. The subcontractor is responsible for fully adhering to the required control families, maintaining accurate documentation, and demonstrating ongoing compliance throughout the contract term. The work is being performed under the auspices of the Defense Logistics Agency within the Department of Defense and falls under NAICS code 541512, indicating it involves computer systems design services. The contract is positioned as a subcontract, and while no specific set-aside designation is provided, performance is expected to meet all applicable federal cybersecurity mandates. Completion of this obligation is essential for maintaining eligibility to handle protected defense information and supporting the broader defense supply chain’s security posture.
Computer Systems Design Services

POSTED

about 6 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and ISO 9001 Compliance SupportThe contract requires comprehensive quality system oversight to maintain strict adherence to ISO 9001:2015 standards, focusing on internal audits, corrective action management, and preparation of Certificate of Conformance and Quality Control documentation for government acceptance at the point of origin. The work is integral to ensuring that all deliverables meet the rigorous quality expectations of the Department of Defense, particularly under the Defense Logistics Agency’s oversight, with an emphasis on systemic compliance rather than isolated inspections. This subcontract falls under NAICS code 541330, indicating specialized scientific and technical consulting services related to quality assurance. Performance is tied to meeting federal acceptance criteria at origin, requiring continuous monitoring, documentation rigor, and proactive resolution of nonconformities. The contract is posted for potential bidders as of July 28, 2026, with no stated set-aside designation, and the place of performance details are not yet specified, though the primary accountability lies with supporting DLA’s quality assurance framework for defense supply chain integrity.
Engineering Services

POSTED

about 6 hours ago

DEADLINE

N/A
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Packaging ServicesThis contract pertains to the identification, labeling, packaging, and documentation of hazardous materials associated with cable and conduit products, ensuring full compliance with federal and military regulatory standards. The scope includes the comprehensive management of Safety Data Sheets and adherence to all applicable requirements for handling, transporting, and documenting hazardous substances throughout the supply chain. Services must align with Department of Defense protocols and national standards for hazardous materials, with an emphasis on accuracy, traceability, and regulatory integrity. The work is performed under a subcontract awarded by the Defense Logistics Agency, operating under the Department of Defense, and falls under the NAICS code 541690 for other scientific and technical consulting services. The contract was posted on July 28, 2026, with performance obligations tied to the delivery and support of military-grade cable and conduit systems. All activities must meet stringent military specifications, and the contractor is responsible for maintaining documented, auditable processes that guarantee compliance throughout the product lifecycle.
Other Scientific and Technical Consulting Services

POSTED

about 6 hours ago

DEADLINE

N/A
View Details
NAICS: 335999
New
DIBBS
Supply of Industrial Cable and Conduit (Electrical Components)The contract entails the supply and delivery of electrical cable and conduit assemblies specifically designed for military or critical infrastructure applications, requiring full compliance with MIL-STD packaging, labeling, and hazardous materials handling regulations to ensure operational readiness and safety. All components must meet stringent military standards for durability, performance, and environmental resilience under demanding conditions. Delivery is specified as FOB Destination to the Defense Logistics Agency Distribution Center in New Cumberland, Pennsylvania, placing responsibility for transportation and risk transfer on the supplier until the goods arrive at the designated location. The contract falls under NAICS code 335999 for other electrical equipment and component manufacturing and is structured as a subcontract within the broader Department of Defense procurement framework, administered by the Defense Logistics Agency. All activities must adhere to federal contracting guidelines and regulatory compliance requirements applicable to defense supply chains.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

N/A
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171)The contract requires the implementation and documentation of all NIST SP 800-171 cybersecurity controls to ensure compliance with DFARS 252.204-7012, specifically focusing on the development of a comprehensive System Security Plan and a Plan of Action and Milestones document. These deliverables must detail the organization’s approach to protecting controlled unclassified information within its systems, outlining current security postures, identified gaps, and remediation strategies with defined timelines. The work is scoped as a subcontract under the Defense Logistics Agency, Department of Defense, and is tied to the NAICS code 541512 for computer systems design services, indicating the need for technical expertise in cybersecurity architecture and documentation. Implementation must align precisely with federal cybersecurity standards, requiring thorough assessment of existing controls, gap analysis, and coordinated efforts across technical and administrative teams to achieve full compliance. Documentation must be accurate, up to date, and capable of withstanding audit scrutiny, with all measures designed to safeguard federal contract information. The contract does not specify a place of performance or point of contact, suggesting flexibility in execution location while maintaining strict adherence to DoD cybersecurity requirements. The solicitation was posted in 2026, indicating the timeline for performance is likely to begin shortly thereafter, with all deliverables due within a timeframe consistent with federal acquisition obligations.
Computer Systems Design Services

POSTED

about 6 hours ago

DEADLINE

N/A
View Details
NAICS: 484220
New
DIBBS
Transportation and Delivery to DLA New CumberlandThe contract specifies the transportation and delivery of packaged retainers to DLA Distribution in New Cumberland, Pennsylvania, under FOB Destination terms, meaning the supplier retains responsibility for all costs and risks until the goods arrive at the designated delivery point. Invoicing must be processed through the Web-Based Acceptance and Fulfillment system, ensuring standardized and efficient payment processing. Compliance with a 77-day Average Days to Outstanding (ADO) requirement is mandatory, emphasizing timely and accurate fulfillment and documentation to meet Defense Logistics Agency performance benchmarks. The procurement is classified under NAICS code 484220, indicating it pertains to truck transportation of freight, and is structured as a subcontract within the Department of Defense’s logistics framework, with no set-aside provisions specified. The contract was posted on July 28, 2026, and is managed through the DIBBS portal under contract number SPE7L326V4410.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 6 hours ago

DEADLINE

N/A
View Details
NAICS: 541990
New
DIBBS
Military Property and Shipment MarkingThis contract requires full compliance with MIL-STD-129 and MIL-STD-130N standards for the proper marking of military property prior to shipment, ensuring accurate identification and traceability throughout the defense logistics chain. All items must be labeled with data matrix codes and unique item identification (UID) tags that meet stringent Department of Defense specifications, enabling automated tracking and inventory management across military supply systems. The work encompasses the application of these markings on equipment, containers, and packaging in accordance with government-mandated protocols for uniformity and durability under operational conditions. The contract is classified as a subcontract under NAICS code 541990 and is managed by the Defense Logistics Agency, a component of the Department of Defense. Although specific performance locations and contact details are not provided, the scope is tied to the broader mission of standardizing military property identification to support logistics efficiency and accountability. The contract was posted on July 28, 2026, and is accessible through the DIBBS system via the referenced UI link, indicating it is part of an active procurement process aimed at securing compliant marking services from qualified subcontractors.
All Other Professional, Scientific, and Technical Services

POSTED

about 6 hours ago

DEADLINE

N/A
View Details
NAICS: 493130
New
DIBBS
Military-Compliant Packaging and PreservationThe contract requires the packaging and preservation of retainers in strict compliance with MIL-STD-2073-1E standards, utilizing MIL-DTL-117 Type II, Class C, Style 1 bags and preservation method 33, which specifies CLNG/DRY conditions to ensure long-term protection against environmental degradation. All items must be prepared, sealed, and labeled according to military specifications to maintain readiness and integrity during storage and transportation. Palletization must adhere to RP001 guidelines to ensure structural stability, efficient handling, and compatibility with military logistics systems. The work is being conducted under a subcontract for the Defense Logistics Agency, a branch of the Department of Defense, and falls under NAICS code 493130, which pertains to warehousing and storage services. The contract was posted on July 28, 2026, with performance location and specific delivery details not specified in the available data, but execution is expected to meet rigorous defense standards for inventory management and deployment readiness.
Farm Product Warehousing and Storage

POSTED

about 6 hours ago

DEADLINE

N/A
View Details
NAICS: 541380
New
DIBBS
Hazardous Material Labeling and Safety Data ComplianceThe contract pertains to the development and validation of hazard labels and Safety Data Sheets that meet OSHA compliance standards for hazardous materials utilized in production or packaging operations. The work involves ensuring all labeling and documentation accurately reflect the chemical properties, risks, handling procedures, and emergency measures required by federal regulations, with a focus on aligning with OSHA’s Hazard Communication Standard. The deliverables must be technically accurate, consistently formatted, and verified through validation processes to guarantee regulatory adherence across all applicable materials. This is a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 541380 for other scientific and technical consulting services. The contract was posted on July 28, 2026, and the scope of performance is not geographically restricted, though the work is tied to defense-related production or packaging activities. Compliance with federal safety regulations is critical, and failure to meet OSHA requirements could result in rejection of deliverables or operational disruptions. The subcontractor must possess expertise in chemical safety documentation and understand the unique demands of defense-sector supply chains.
Testing Laboratories and Services

POSTED

about 6 hours ago

DEADLINE

N/A
View Details
NAICS: 332999
New
DIBBS
Manufacture of Packing Retainer (Non-Commercial Item)The contract entails the custom fabrication of 179 units of a military-spec packing retainer identified by NSN 5330004122772, manufactured to exacting standards including MIL-STD-130N for marking, SAE AS8791D for material and process control, and NAVSEA 5100-003D for naval system compatibility. All units must be free of hazardous materials such as asbestos and mercury, ensuring environmental and personnel safety throughout the product lifecycle. The item is classified as a non-commercial item, indicating it is uniquely designed or developed for military use and not available off-the-shelf. The contract is issued as a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with a NAICS code of 332999 for other fabricated metal product manufacturing. It was posted on July 28, 2026, and performance location details are not specified, implying potential flexibility in manufacturing site selection. No set-aside classification is indicated, and there is no designated point of contact listed in the provided data. The contractual obligation centers entirely on the precise construction and compliance of the retainers without ancillary services or support requirements.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

N/A
View Details
NAICS: 333924
New
DIBBS
PLATE, SEALINGThe contract centers on the procurement of a sealing plate identified by NSN 4610015895272, with a single unit required under each of two CLINs totaling two units. Delivery is mandated within 20 days of award, with FOB destination terms, no acceptance or inspection at origin, and strict zero variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E, including specific preservation, wrapping, and unit container standards, while marking follows MIL-STD-129 without special codes. Palletization adheres to DLA’s packaging requirements, and shipment must avoid parcel post, using instead the fastest traceable means to the specified FPO addresses for USS OAK HILL LSD 51 and USS PEARL HARBOR LSD 52. Mercury or mercury-containing compounds are strictly prohibited unless part of an exempted functional component such as batteries, fluorescent lamps, sensors, or weapon systems, with any exempted mercury devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions controlled by the solicitation or award date depending on acquisition size. The contract is issued under SPE8E8-26-T-4877, with a required delivery date of July 23, 2026, and commercial vendor actions must utilize the DLA VSM system for logistics coordination.
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 324110
New
DIBBS
CELL, SALINITY DETECThe contract pertains to the procurement of one unit of a salinity detection cell, identified by NSN 4620-01-696-4392 and part numbers IC/SB-S32-M7770 and 218109652, with a requirement for delivery within five days of contract award. Delivery is to be made FOB destination to the USS HYMAN G RICKOVER (SSN 795) at FPO AE 09591, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specified preservation methods, container types, and marking standards. Palletization follows DLA packaging requirements, and shipment must utilize the fastest traceable means—parcel post is prohibited. The item is designated for military use under a Department of Defense procurement managed by the Defense Logistics Agency, with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The solicitation number is SPE8E8-26-T-4872, with a required delivery date of July 27, 2026, and the point of contact is Alexis Selby. All vendor actions must align with DLA procedural notes C19 and C20 concerning transportation and first destination handling.
Petroleum Refineries

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details