Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Sterile Hypodermic Needle Supply (20G x 1.5")

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of sterile, single-use, double-pointed hypodermic blood-collecting needles, 20 gauge and 1.5 inches in length, each equipped with a shut-off sleeve and a yellow hub. All products must meet FDA compliance standards and be packaged in quantities of 1,000 needles per unit. Deliveries are required to adhere to DLA and medical logistics protocols to ensure proper handling, traceability, and readiness for military medical use. The items are designated for performance at FPO, ZIP 09578-2303, reflecting their intended use within Department of Defense medical support operations. This subcontract, identified under NAICS code 339113, was posted on July 19, 2026, with responses due by July 27, 2026. It is issued by the Medical Supply Chain MD Surg FSF under the Department of Defense, with specifications tailored to maintain consistent quality and supply chain integrity for frontline medical personnel. The procurement is conducted through the DIBBS system, and all bidders must ensure full compliance with technical, packaging, and delivery requirements outlined in the solicitation.

General Info

Supply of FDA-compliant 20-gauge sterile blood-collecting needles with shut-off sleeves, 1,000 per unit, for DoD use at FPO 09578-2303.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

FPO, AE, 09578-2303, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of sterile, single-use, double-pointed hypodermic blood-collecting needles, 20 gauge, 1.5 inches in length, with shut-off sleeve and yellow hub. Items must be FDA-compliant, packaged in units of 1,000 per package, and delivered in compliance with DLA and medical logistics standards.

Similar Contracts

Same NAICS industry code

Supply of Industrial Spectacles (ANSI Z87.1 Compliant)The contract entails the procurement and delivery of 16 units of industrial safety spectacles compliant with ANSI Z87.1 standards, intended for use by government entities under the Department of Defense. The items must meet stringent safety and performance requirements to ensure adequate eye protection in hazardous environments. Delivery is scheduled under FOB Destination terms, with the final destination specified as Duluth, Minnesota, meaning the supplier is responsible for all transportation costs and risks until the goods arrive at that location. The contract is classified as a subcontract under NAICS code 339113, which pertains to the manufacturing of eyewear and vision accessories. It was posted on July 20, 2026, and is managed by the Defense Logistics Agency. No set-aside criteria or specific contracting office details are provided, and no point of contact information is listed within the data.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Supply of Industrial Safety Goggles (NSN 4240014925722)The contract entails the procurement and delivery of five units of industrial-grade safety goggles identified by NSN 4240014925722 and part number 740-0191, with all units required to fully comply with the cataloged technical and safety specifications. Delivery is to be made FOB destination using a traceable express carrier to ensure secure and timed transit, with proper tracking and documentation throughout the shipping process. The solicitation falls under a subcontract with a NAICS code of 339113, indicating classification within the manufacturing of eyewear and related protective equipment. The awarding agency is the Defense Logistics Agency under the Department of Defense, and the contract was posted on July 20, 2026, with performance details unspecified beyond delivery terms. The transaction is referenced through the DIBBS system under contract number SPE8EJ21D0032 with delivery reference SPE8EJ26F037T and count 58835.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Supply of Industrial Safety SpectaclesThe contract entails the procurement and delivery of five industrial-grade safety spectacles that meet implied military or ANSI Z87.1 safety standards, ensuring compliance with rigorous protective eyewear requirements. The items are to be shipped FOB destination to Fort Bragg, North Carolina, with a firm delivery deadline of September 18, 2026. This is a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under NAICS code 339113, which pertains to the manufacturing of medical and dental equipment and supplies, indicating the precision and regulatory standards expected in production. The solicitation was posted on July 20, 2026, and the contract reference is tied to DLA’s procurement system, though no specific set-aside or organizational type is specified, suggesting it is open to qualified general contractors. Delivery terms and certification compliance are central to meeting operational readiness needs at the installation.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Industrial Safety Spectacles SupplyThe contract pertains to the supply of 30 units of industrial safety spectacles that must meet either ANSI Z87.1 or military safety standards, ensuring compliance with rigorous protective eyewear requirements for defense personnel. The items must be properly packaged and labeled to facilitate secure handling and accurate identification upon arrival at Fort Bragg, North Carolina, the designated place of delivery. This agreement is classified as a subcontract under the NAICS code 339113, which corresponds to the manufacturing of optical goods, and is administered by the Defense Logistics Agency on behalf of the Department of Defense. Though solicitation details and specific point of contact information are not provided, the contract was posted on July 20, 2026, and is accessible through the DIBBS system for award tracking and procurement transparency.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

PIPET, TRANSFERThe contract specifies the procurement of 1 case of sterile polyethylene transfer pipets, each with a capacity of 1 milliliter and a length of 15 centimeters, designed for single-use with calibrated graduations and packaged in peelable bags. Each case contains 2000 units, and the item is identified by NSN 6640-01-693-5717 under Purchase Request 7017530536. Technical and quality standards referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA requirements, and non-accepted supplies must have government identification removed prior to return. Delivery is required within 20 days of award, and the place of performance is listed as FPO with ZIP 34092. The solicitation, issued under SPE2DH-26-T-5300, was posted on July 20, 2026, with responses due by July 27, 2026, and falls under NAICS code 339113 for medical and dental equipment and supplies manufacturing. The contracting office is part of the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

FRAME, INDUSTRIAL SPThe contract pertains to the procurement of 20 units of FRAME, INDUSTRIAL SP with NSN 4240-01-633-2469 under solicitation SPE8E6-26-T-3753, issued by the Defense Logistics Agency. The delivery must be completed within 20 days of the award, with products shipped FOB origin and inspected and accepted at the destination. Packaging must comply with DLA’s master list of technical and quality requirements, which override general standards such as ASTM D3951; if the item is hazardous per FED-STD-313, it must be packaged according to TQ requirement IP025, otherwise commercially packaged under DLA’s specified guidelines. All packaging and labeling must follow MIL-STD-129, with palletization adhering to RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT, and the unit of issue is EA with no quantity variance permitted. The shipment must be delivered to Fort Lewis, WA, via the fastest traceable means, prohibiting parcel post, and marked for the specified government address. The required delivery date is July 21, 2026, and the item is covered under defense information protocols, requiring strict handling of government identification on non-accepted supplies. The contract mandates compliance with all referenced DLA technical standards and includes a point of contact for inquiries.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

SEALING COMPOUNDThis contract specifies the procurement of a black sealing compound identified by part number PR-2201 B1 and NSN 8030-01-511-1245, with a unit of issue of KT and a total quantity of 6,000 units, each containing 2.5 fluid ounces. The product is classified as a Type 2 item with a shelf life of six months, extendable under RS001 requirements, and must be stored below 80 degrees Fahrenheit. It is subject to stringent packaging and labeling standards per MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA’s packaging guidelines and hazardous material shipping rules under IP025. The sealing compound is classified as a hazardous material, requiring suppliers to submit Safety Data Sheets (SDS) and compliant Hazard Communication Standard labels aligned with 29 C.F.R. 1910.1200, alongside employee training on GHS-compliant labeling and documentation. All deliveries must be shipped FOB destination within 20 days of contract award and are prohibited from using parcel post; instead, they must be transported by the fastest traceable means. The delivery location is Edwards Air Force Base, California, with the required delivery date set for July 21, 2026. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition scale. The contract enforces zero variance in quantity and mandates inspection and acceptance at the destination point.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

NARCOTIC CONTROL CABINThe contract is for the procurement of one narcotic control cabinet with double locking mechanism, constructed from 22-gauge stainless steel, featuring a triple-bolt wafer lock on the outer door and a single-bolt flat key lock on the inner door, both suspended by piano hinges and pre-mounted on two medical equipment rails (P/N MER-1). The cabinet measures 22.5 inches high, 23.625 inches wide, and 15.750 inches deep, with the unit of issue being each. The NSN is 6530-01-407-4732, and the delivery is required within 84 days after the request order, with the final delivery location designated as APO AE 09227-0000, under FOB destination terms. The solicitation number is SPE2DH-26-T-5299, issued on July 20, 2026, with responses due by July 27, 2026, under the NAICS code 339113 and administered by the Medical Supply Chain FSH of the Department of Defense. The contract specifies stringent compliance with MIL-STD-2073-1E for packaging and preservation and MMS No. 1 for medical item marking, replacing MIL-STD-129 for routine labeling, though MIL-STD-129 remains applicable for radioactive materials. Hazardous materials must conform to OSHA’s Hazard Communication Standard, and any exempted substances must be documented under applicable federal acts. Cybersecurity requirements include compliance with DFARS 252.204-7012, mandating safeguarding of controlled unclassified information per NIST SP 800-171 and timely reporting of cyber incidents. The contractor must adhere to ethical provisions including whistleblower protections, restrictions on compensation of former DoD officials, and prohibitions on the use of covered telecommunications equipment. Invoicing must be submitted electronically through WAWF, and the contractor must provide a unique entity identifier and CAGE code. All offerings must include source and part number details, and the contract incorporates numerous FAR and DFARS clauses governing employment rights, trafficking in persons, employment eligibility, sustainable products, hazardous materials, data disclosure, and subcontractor payment acceleration. The estimated value is approximately $9,682.42 based on historical pricing data for similar items under the

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

SPLINT, HANDThe contract specifies the procurement of a left-handed cock-up hand splint made of canvas with a malleable aluminum insert, hook and pile closure, and flannel lining, supplied by TruForm Orthotics & Prosthetics Co. under part number T85-0771-S-LT and NSN 6515-01-156-2468. This medical device is regulated by the FDA, requiring procurement officials to submit a referral in EBS for product specialist confirmation, including bidder and manufacturer details. Packaging must comply with Commercial packaging standards and Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and each unit must be sealed in a protective container suitable for safe transport via common carrier to the delivery point. All items must be marked in accordance with MMS No. 1, available through DLA Troop Support, and shipped FOB destination with no variance allowed in quantity. The contract requires delivery within 42 days under solicitation SPE2DS-26-T-249S, with inspection and acceptance occurring at the destination. The item is classified under NAICS 339113, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date. The contracting office is the Department of Defense’s Medical Supply Chain, managed by Chandler Alvarez, with the delivery point designated as APO 09227-0000.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

AIRWAY, ORALThe contract pertains to the procurement of a large, 100 mm, sterile, disposable oral airway device, specifically the Berman type, supplied in packages of ten units each. The item is identified by NSN 6515-01-367-5272 and is required in a single package quantity for delivery within 20 days of award. The solicitation number is SPE2DS-26-T-249N, issued under the Department of Defense’s Medical Supply Chain, with performance designated at Fort Bragg, NC, 28310. Bidders must clearly state the source and part number of the product being offered. The contract incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date, depending on acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have all government identification removed prior to return. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, under a federal procurement framework governed by NAICS code 339113 for medical device manufacturing.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

PAD, HEAT TREATMENTThe contract specifies the procurement of 2 cases of PAD, HEAT TREATMENT, each case containing 24 single-use instant heat packs designed to reach 112 degrees Fahrenheit when activated at room temperature, providing immediate therapeutic heat relief. Each pad is large in size and intended for one-time use, with a mandatory 24-month shelf life requiring no more than three months to have elapsed from the manufacturer’s date to the delivery date to the government. Labeling must comply with the latest MMS1A standards, clearly indicating the manufacturer date, expiration or retest date, and the contract or lot number. The product must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with packaging adhering to DLA procurement standards. The government retains the right to remove identifying marks from non-accepted supplies, and the product may involve covered defense information. The NSN is 6530-01-684-4258, with a delivery requirement of 20 days ADO under solicitation SPE2DH-26-T-5298, issued by the Department of Defense’s Medical Supply Chain FSH. Bidders must provide the precise source and part number, and all submissions must align with the technical specifications and compliance mandates outlined in the procurement documentation.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

SPLINT, LEGThe contract is for the procurement of five femoral fracture splints designated as SPLINT, LEG with NSN 6515-01-521-5730, each constructed from black matte carbon fiber featuring corrosion resistance, temperature stability, and minimal radar reflectivity. The splints include upgraded ischial straps and cobra buckles for enhanced durability and ease of use, designed to be both lightweight and compact, with a powerful 4:1 easy-adjusting system offering micro-adjustment capability. Each unit is supplied in a multicam camouflaged transport bag measuring 3 x 10 inches, and must be packaged in sealed unit containers that prevent damage or breakage, with exterior shipping containers meeting commercial standards for safe and cost-effective delivery to Fort Bragg, North Carolina, in compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Suppliers must specify the source and part number being provided and ensure all packaging and marking adhere strictly to DLA requirements outlined in RP001 and other referenced technical standards. This procurement is governed under solicitation SPE2DS-26-T-249P, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with a response deadline of July 27, 2026, and delivery required within 20 days of award. The item is classified under NAICS code 339113 and is subject to technical and quality requirements identified in the DLA Master List of Technical and Quality Requirements, referenced via RA001. Covered defense information may apply under RD003, and removal of government identification from non-accepted supplies is prohibited per RQ011. Bidders must comply with all packaging and marking directives, and all units must be delivered to the specified point of performance without exception. The point of contact for the solicitation is James Burke, reachable through the provided email and phone number.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

SURGICAL PACK, DISPOSABThe contract is for the procurement of 100 cases of a disposable surgical pack designed for hip and shoulder procedures, with each case containing four units. Each surgical pack includes a standardized set of disposable items such as orthopedic labels, compression bandages, skin markers, suction tubing, hypodermic needles in 18GA and 21GA sizes, a 20ML luer lock syringe, back table cover, bone wax, adhesive drape, surgical blades in sizes 10 and 15, an emesis basin, a clear adhesive suture bag, and paper stock labels. All items are non-sterile unless otherwise noted with “ST,” indicating sterile packaging. The unit of issue is a case of four, and the pack is designated by part number SOP73HSMTD for the complete kit. The item is identified by NSN 6515-01-702-5058 with a delivery requirement of 20 days after order award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. Government identification must be removed from non-accepted supplies, and the bidder must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-249X by the Department of Defense Medical Supply Chain, was posted on July 20, 2026, with responses due by July 27, 2026, and performance will occur at FPO, ZIP 09566-4008.

Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

SKIN CLEANSERThe contract is for the procurement of a skin cleanser containing 60 percent ethyl alcohol, packaged in 4-ounce bottles with no rinsing required, identified by NSN 8520-01-499-8145 and requiring a quantity of six bottles. The item is classified as a TYPE I (CODE M) product with a mandatory 24-month shelf life that is non-extendable, and delivery to the government must not exceed four months from the date of manufacture. Packaging must comply with DLA packaging requirements, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders must clearly state the source and part number being offered, and any non-accepted supplies must have government identification removed prior to return. The delivery timeframe is 20 days after award, with performance occurring at APO 96213-2166, and the solicitation number is SPE2DS-26-T-249M, issued on July 20, 2026, with responses due by July 27, 2026. The contract is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with Marc Canalichio as the primary point of contact.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

VALVE, RESUSCITATORThe valve resuscitator is a barrier system featuring three distinct filtration layers and a one-way duck bill valve, designed to ensure safe and effective resuscitation procedures. It includes top and bottom ports, with adjustable pressure limitations ranging from 5 to 20 cm H2O, and is equipped with a standardized 22mm ID connector compatible with any resuscitation bag flow diverter featuring the same connection. Each unit is individually packaged and must meet strict shelf life requirements: a minimum of 60 months from manufacture, with no more than nine months elapsed between manufacturing and delivery to the government. The product is issued in boxes of 10, with a total order quantity of 20 boxes for delivery within 70 days after award. This item is identified by NSN 6515-01-620-0444 under purchase request 7017560077 and is subject to technical and quality requirements from the DLA Master List, as well as specific packaging and supply handling protocols. The solicitation, issued by the Department of Defense under contract number SPE2DS-26-T-249V, has a response deadline of July 27, 2026, and requires delivery to APO 09227-0000, with primary point of contact Elizabeth Cruz available for inquiries.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

NEW METHYLENE BLUE N SThis is a two-component reagent pack designed for the quantitative determination of reticulocytes in whole blood specimens using hematology analyzers. The kit includes Reagent A, a staining solution containing 0.06% w/v new methylene blue in a buffered formulation, and Reagent B, a clearing solution comprising 0.15% w/v sulfuric acid with stabilizers. The reagents are packaged as one 380 mL bottle of Reagent A and one 1,900 mL bottle of Reagent B, and must be stored between 36°F and 86°F (2°C to 30°C). The product has a non-extendable shelf life of 12 months, with no more than one month allowed to have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and all items must be marked accordingly. The item is classified as a TYPE I (CODE H) medical supply under shelf-life requirement RS011, and government identification must be removed from non-accepted supplies per RQ011. Technical and quality requirements referenced in this contract are drawn from the DLA Master List of Technical and Quality Requirements. The procurement is under solicitation SPE2DS-26-T-250H, with a purchase request for 10 units to be delivered within 20 days of award, to the military postal address FPO 09566-4008.

In-Vitro Diagnostic Substance Manufacturing

POSTED

about 5 hours ago

DEADLINE

FECAL SPECIMEN COLLThe fecal specimen collection and transportation kit is a specialized parasitology kit designed for the collection, preservation, and transport of stool samples for the detection of intestinal parasites. Each kit contains a screw-cap vial with a built-in collection spoon and is color-coded for easy identification. The kit is a two-vial system, employing ZN-PVA and 10% formalin media to maintain sample integrity during transit and storage. Kits must be stored at room temperature between 15°C and 30°C, avoiding excessive heat or cold. The unit of issue is a package of ten kits, marked in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129. The item has a non-extendable shelf life of 24 months, with no more than three months elapsed from manufacturing to government delivery. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA procurement standards. The item is identified by NSN 6550-01-737-1200 and is subject to a delivery requirement of ten days after award.

In-Vitro Diagnostic Substance Manufacturing

POSTED

about 5 hours ago

DEADLINE

SHIELD, EYE, SURGICALThe contract is for 4 packages of surgical eye shields, each package containing 12 units, totaling 48 individual shields. Each shield measures 80 mm in length and 55 mm in width, is flesh-colored, plastic, and includes an elastic band for secure post-operative eye occlusion and trauma prevention. The item is identified by NSN 6515-01-320-4479 and is sourced under solicitation SPE2DS-26-T-249U with a response deadline of July 27, 2026. Delivery is required within 63 days of award. The product must comply with technical and quality requirements referenced in the DLA Master List, and packaging must adhere to DLA procurement standards. All bids must specify the source and part number of the supplied item, and any non-accepted supplies must have government identification removed. The contracting activity is under the Department of Defense, Medical Supply Chain, with performance occurring at APO 09227-0000, and the primary point of contact is Zaylin Robinson.

Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

AIRWAY, NASOPHARYNGEThe nasopharyngeal airway (NPA) 28FR is a medical device constructed from kink-resistant silicone polymer, designed for safe and straightforward insertion by any healthcare provider. It features a smooth, rounded tip to minimize trauma during use and a trumpet design to ensure secure placement. The device is latex-free and DEHP-free, meets TAA compliance standards, and is individually packaged in sterile conditions with a five-year shelf life. Each unit is to be delivered with no more than nine months having passed between the manufacturer’s production date and the government’s receipt date, ensuring freshness and efficacy. The NSN is 6515-01-735-0527, the quantity required is 75 units, and delivery must occur within 20 days of award. This solicitation, identified as SPE2DS-26-T-250D, is issued by the Department of Defense’s Medical Supply Chain under the NAICS code 339112. Bidders must clearly state the source and part number being offered, and all supplies must comply with DLA packaging requirements and the removal of government identification from non-accepted items. Technical and quality specifications referenced under RA001, RP001, and RQ011 are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date. The point of contact is Patrick Esposito, and performance is to be delivered to Fort Campbell, Tennessee, with responses due by July 27, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

POUCH, HUMAN REMAINSThe contract specifications detail a white adult body bag measuring 90 by 36 inches, constructed from high-grade, latex-free polyvinyl chloride with heat-sealed sides and bound edges for durability and containment. It features a heavy-duty, rust-proof, curved nylon zipper with a full-length slide fastener, designed for secure and reliable use in the handling of human remains. The pouch is disposable and single-use, and includes three white identification tags for proper labeling. It complies with OSHA universal precautions for containing body fluids and protecting against bloodborne pathogens. Each unit is individually packed in a poly bag, and the unit of issue is a case of ten. The product must have a shelf life of sixty months, with no more than nine months elapsed from the date of manufacture to the date of delivery to the government. Packaging and quality requirements follow DLA standards, with technical and quality specifications governed by the DLA Master List of Technical and Quality Requirements. The NSN is 9930-01-730-0854, with a quantity of five cases required under purchase request 7017405723, to be delivered within twenty days of award to Fort Detrick, Maryland. The solicitation number is SPE2DS-26-T-250B, issued by the Department of Defense's Medical Supply Chain, with Tiffany Parker as the primary point of contact.

Burial Casket Manufacturing

POSTED

about 5 hours ago

DEADLINE

AIRWAY, PHARYNGEALThe product is a 100 mm Guedel airway, color-coded red, made from opaque, flexible PVC plastic, intended for single-use only and supplied non-sterile in packages of 100 units per package. Each package constitutes the unit of issue, with a total quantity of two packages required for this solicitation. The item must have a minimum shelf life of 60 months from the date of manufacture, and no more than nine months may have elapsed between manufacture and delivery to the government. All items must be marked in compliance with the latest edition of the Medical Marking Standard No. 1, and suppliers must adhere to DLA packaging requirements and guidelines for removal of government identification from non-accepted supplies. Bidders are required to clearly specify the source and part number being offered. The item is identified by NSN 6515-01-308-8949 and must be delivered within 20 days after order award. This procurement is under solicitation SPE2DS-26-T-249Z, issued by the Department of Defense’s Medical Supply Chain, with responses due by July 27, 2026, and technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date.

Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

CULTURE MEDIA, HEKTOThis contract specifies the procurement of HEKTOEN ENTERIC AGAR culture media for the isolation of Salmonella and Shigella species, featuring a moderately selective formulation that enables differentiation through H2S production, resulting in black-centered colonies, and a high lactose content to prevent delayed fermentation. The medium is light beige in color and must be stored under refrigeration between 2 to 8 degrees Celsius, with no freezing allowed. Each unit of issue consists of 100 packages per PG, with a total order of 2 PG. The item is classified as a TYPE I (CODE C) medical product with a non-extendable shelf life of three months, requiring that no more than 13 days have passed from the date of manufacture to the date of government delivery. All packaging must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and must clearly label the date of manufacture, expiration or retest date, and contract or lot number according to the latest revision of MMS1C. The solicitation, identified as SPE2DS-26-T-250P, is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with a response deadline of July 27, 2026, and a required delivery within 20 days of award. The NSN is 6550-01-737-5668, and the purchase request number is 7017324176. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and the item falls under NAICS code 325413. Covered defense information may apply, and all supplies must adhere to DLA packaging standards, including the removal of government identification from non-accepted supplies. Point of contact for inquiries is Anh Lam, reachable via email and phone provided.

In-Vitro Diagnostic Substance Manufacturing

POSTED

about 5 hours ago

DEADLINE

BOTTLE, SCREW CAPThe contract specifies the procurement of 4-ounce cylindrical plastic bottles with screw caps and liners, marked permanently with “USED OIL,” intended for non-medical use and subject to strict packaging and marking requirements. Each unit must be sealed in a protective container to prevent damage, packed in commercial shipping containers suitable for safe delivery via common carriers at the lowest cost to the designated destination, and labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. The bottles are to be delivered FOB destination within five days, with no variance allowed in quantity, and inspection and acceptance occur upon arrival. The supplier must comply with all DLA Master List of Technical and Quality Requirements, particularly those related to packaging, and ensure no intentional addition of mercury or mercury compounds, except for limited exempted uses like batteries or sensors. Hazardous material packaging must follow FED-STD-313 and TQ requirement IP025 if applicable; otherwise, ASTM D3951 applies, though DLA requirements take precedence. The item is identified by NSN 6640-01-096-7529 and purchased in units of each (EA), with a required quantity of three units under purchase request 7017540705. Delivery is targeted for July 22, 2026, and the contract mandates adherence to DLA packaging standards including palletization per RP001 and commercial packaging criteria. The buyer is required to meet a minimum purchase of seven units despite the order quantity being three, indicating a possible mismatch or requirement for future fulfillment. Packaging and labeling must reflect the government’s unique identification protocols, and the product must be supplied by approved vendors such as DRESSER-ARGUS, INC or GERIN CORP INC with specified part numbers. Shipment is directed to Pearl Harbor Naval Shipyard with specific parcel post and freight addresses, and all documentation must include government-use-only codes and tracking identifiers. The contract also requires bidders to clearly specify the commercial part number and manufacturer being offered.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

MASK, OXYGENThe contract pertains to the procurement of disposable adult rebreathing oxygen masks, identified by NSN 6515-01-519-6766, with a total quantity of six units packaged in two packages of five each. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which must be adhered to as per the revision in effect on the solicitation issue date or award date, depending on the acquisition size. Compliance with DLA packaging standards and the removal of government identification from non-accepted supplies is mandatory. The item is classified under NAICS code 339112 and is being sourced by the Department of Defense through the Medical Supply Chain MD Surg FSF. Bidders are required to clearly state the source and part number being offered. The solicitation, issued under number SPE2DS-26-T-249Q, was posted on July 20, 2026, with a response deadline of July 27, 2026, and delivery must be completed within 20 days of award. Primary point of contact for inquiries is Seth Tootell, reachable via phone or email provided.

Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE