Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Sterile Packaging and Labeling Services

Active

Federal

Response Deadline07/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the sterile packaging of resuscitators in resealable plastic carrying bags, with each package containing exactly twelve units, ensuring that all items are maintained in a contamination-free state throughout the packaging process. Comprehensive GHS-compliant labeling must be applied to each package, including all required hazard statements, signal words, pictograms, and precautionary information, while a complete and accurately formatted Safety Data Sheet must accompany each shipment to meet international regulatory standards. The work is to be performed under a subcontract arrangement for the Department of Defense, specifically for the Medical Supply Chain MD Surg FSF, with performance located at APO 09227-0000, indicating overseas or military logistics operations. Response submissions are due by July 28, 2026, and the NAICS code 325992 reflects classification under Other Pharmaceutical and Medicine Manufacturing, underscoring the specialized nature of the packaging and labeling requirements.

General Info

Sterile packaging of twelve resuscitators per bag with GHS labeling and SDS required for DoD at APO 09227-0000 by July 28, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

325992 - Photographic Film, Paper, Plate, Chemical, and Copy Toner ManufacturingView NAICS

Place of Performance

APO, AE, 09227-0000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Sterile packaging of resuscitators in resealable plastic carrying bags (12 units per package), with GHS-compliant labeling and Safety Data Sheet (SDS) preparation.

Similar Contracts

Same NAICS industry code

Supply of Copper Sulfate Solution (Chemical Reagent for Water Treatment)The contract seeks the supply of copper sulfate solution intended for use in water or wastewater treatment processes, encompassing all aspects of delivery from manufacturing through final placement at the point of use. The vendor must ensure complete packaging and accurate labeling in accordance with industry standards and regulatory requirements, and is responsible for safe, compliant transportation of the chemical reagent. Full adherence to federal, state, and local safety and environmental regulations is mandatory throughout the entire supply chain, from production to delivery. The product must meet specified purity and concentration standards suitable for utility-scale water treatment applications. This subcontract is being procured by the Trinity River Authority of Texas under NAICS code 325992, which classifies the manufacturing of other chemical products, and responses are due by August 12, 2026. The place of performance is not explicitly defined but is expected to serve facilities operating under the authority’s jurisdiction in Texas. All bids must be submitted through the designated online portal prior to the deadline, and vendors are expected to have the capacity to consistently deliver product at scale with full documentation for regulatory compliance. No set-aside provisions are specified, making this opportunity open to qualified suppliers regardless of business size or affiliation.

Trinity River Authority of Texas

POSTED

about 21 hours ago

DEADLINE

Alternative Daily Cover (ADC) Material Manufacturing or Supply

City of Savannah

POSTED

DEADLINE

Military-Compliant Packaging and Marking Services

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Protective Packaging and Preservation ServicesThe contract requires the provision of military-compliant packaging, preservation, and drying services for fabricated poles, strictly adhering to the standards MIL-P-28983A and MIL-STD-2073-1E. Specific preservation methods listed include PRES MTHD:10 and CLNG/DRY:1, ensuring that all materials are treated and enclosed in ways that meet rigorous Department of Defense requirements for long-term protection against environmental degradation. The work must be performed to exact specifications to guarantee readiness and functionality under extreme conditions during storage and transit. This is a small business set-aside subcontract under the North American Industry Classification System code 325992, awarded by the Department of Defense through C AND T SUPPLY CHAIN. The solicitation was posted on July 22, 2026, with responses due by July 28, 2026, indicating a tight turnaround window. Performance location details are unspecified, but the work is expected to support military logistics and supply chain operations. Only small businesses qualifying under the SBA’s total small business set-aside criteria are eligible to respond, emphasizing the government’s intent to support small business participation in defense-related contracting.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Medical Device Packaging and Labeling ServicesThe contract involves the commercial packaging and labeling of oral airways in strict compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring all materials are properly sealed, labeled for hazards, and marked for destination according to Military Marking Standard No. 1. The work requires adherence to rigorous military specifications for containerization to maintain product integrity, safety, and traceability throughout the supply chain, with all packaging and labeling activities performed to meet国防部's operational readiness requirements. The contract is classified as a subcontract under NAICS code 325992 and is solicited by the Department of Defense through the Medical Supply Chain MD Surg FSF office. The place of performance is designated as Fort Bliss, Texas, with a zip code of 79918-2527. The solicitation was posted on July 22, 2026, and responses are due by July 28, 2026, providing a limited six-day window for submission. All bidders must align with the military’s exacting packaging and labeling protocols to ensure seamless integration into defense logistics systems.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Camera SystemThe U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is seeking proposals for a Camera System under solicitation number W911S226U3783, posted on July 22, 2026, with responses due by July 29, 2026, at 8:00 PM. This is a combined solicitation classified as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses certified by the Small Business Administration are eligible to bid. The procurement falls under NAICS code 325992, which pertains to Other Chemical Product and Preparation Manufacturing, suggesting the camera system may involve specialized or custom-built components requiring advanced manufacturing capabilities. The contract’s performance location is designated as Fort Drum, New York, with a zip code of 13602, and all deliverables are expected to support operations at this military installation. The primary point of contact for inquiries is Daniel Crawford, reachable via email at daniel.d.crawford3.civ@army.mil or by phone at 910-396-8943. All interested parties must submit their proposals through the SAM.gov portal using the provided UI link. As a Defense Department acquisition, strict compliance with federal procurement regulations and security protocols is required, and bidders must demonstrate the ability to meet technical specifications, delivery timelines, and potential security clearance requirements pertinent to military operations. The set-aside designation emphasizes the Department’s commitment to fostering small business participation in defense-related technology development.

W6QM Micc-Ft Drum

POSTED

DEADLINE

Supply of Gear Lubricating Oil (NSN 9150010355393)The contract involves the manufacture or supply of military-grade gear lubricating oil designated by NSN 9150010355393, adhering strictly to federal specifications for performance and quality. The product must be properly packaged to ensure integrity during transport and delivered to Subic Bay in the Philippines, fulfilling operational requirements for military equipment maintenance in the region. The work is classified as a subcontract under the NAICS code 325992, indicating it pertains to other chemical product and preparation manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 21, 2026, and the contract is tied to the award reference SPE4AX16D9008 with delivery identifier SPE4A626FCWWW, signifying its place within a broader logistics and supply chain framework for U.S. defense operations in the Pacific.

Defense Logistics Agency

POSTED

DEADLINE

Commercial Packaging and Unit Sealing ServicesThe contract seeks commercial packaging services for medical supply logistics, requiring sealed unit containers and exterior shipping packaging that meet federal logistics standards. The work involves ensuring all packaging complies with regulatory requirements to support secure, efficient transportation and handling of medical supplies within the Department of Defense supply chain. Performance is designated for FPO with a zip code of 96667, indicating operations will serve military postal destinations overseas. This subcontract is classified under NAICS code 325992, which covers other chemical product and preparation manufacturing, suggesting the packaging may involve specialized materials or processes tied to medical or pharmaceutical logistics. The solicitation was posted on July 21, 2026, with a response deadline of July 27, 2026, providing a limited six-day window for interested parties to submit proposals. The contracting activity is managed under the Medical Supply Chain MD Surg FSF, underscoring the critical nature of the packaging to military medical readiness and deployment operations.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Raw Materials (Nylon Yarn and Waterproofing Chemicals)The contract pertains to the supply of high-tenacity nylon yarn and specialized waterproofing chemical treatments required for the production of military-spec fabric, strictly compliant with PIA-C-7219 and DFARS standards. All materials must meet exacting defense-grade specifications to ensure durability, performance, and regulatory adherence in operational environments. The subcontract is issued under NAICS code 325992, indicating classification within other chemical product and preparation manufacturing, and the place of performance is designated as Phoenix, Arizona, with a zip code of 85043. The solicitation was posted on July 21, 2026, and responses are due by August 4, 2026, with the overarching organization being the Department of Defense through C AND T SUPPLY CHAIN. The contract is not subject to a specific set-aside designation, and participation requires full compliance with federal defense procurement regulations without exception.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Diesel Fuel Additive Blending and Stabilization ServicesThe contract establishes the provision of additive blending services specifically tailored to meet MIL-S-53021 and QPL-25017 specifications for the corrosion inhibition and stabilization of ultra-low sulfur diesel fuel. These services are critical to ensuring fuel integrity under demanding operational conditions, particularly for military applications where long-term storage and performance stability are essential. The work involves precise formulation, quality control, and blending processes to meet strict Department of Defense standards, with all activities governed by mandated technical requirements and compliance protocols. This subcontract, issued under the Defense Logistics Agency and classified under NAICS code 325992, focuses on specialized chemical blending operations without a specified place of performance or point of contact. The contract was posted on July 21, 2026, and is part of the broader DLA supply chain strategy to secure reliable fuel additives that enhance fleet readiness and equipment longevity. No set-aside designation is indicated, suggesting open competition among qualified vendors with the requisite certifications and experience in handling military-grade fuel stabilization systems.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Brake Parts Cleaner (Commercial Chemical Product)

Defense Logistics Agency

POSTED

DEADLINE

Engine Lubricating Oil Supply (Military-Grade)

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

BLOOD RECIPIENT SETThe blood recipient set is a sterile, disposable indirect transfusion device with a standard blood filter ranging from 170 to 260 microns, a male luer lock adapter, and a Y-type blood/solution set measuring 98 inches overall, designed for precise fluid delivery at 10 drops per milliliter. Each unit is packed in quantities of 48 per box, adhering strictly to commercial packaging standards and the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951 and MIL-STD-129. Packaging must ensure protection against damage, meet medical marking standard No. 1, and be palletized per DLA procurement guidelines, with all items marked and labeled accordingly for traceability and compliance. The product is manufactured by Baxter Healthcare Corporation under part number 2C6720 and is identified by NSN 6515-01-462-5563. The contract specifies delivery within five days FOB destination with zero quantity variance, inspection and acceptance occurring at the delivery point. Two separate delivery lines are listed, each requiring shipment to different Fort Bragg locations in North Carolina via the fastest traceable means, prohibiting parcel post. Delivery deadlines are set for July 17, 2026, and July 27, 2026, with specific freight shipping addresses and contact details for each recipient unit. Government use identifiers, project codes, and tracking data are included for internal logistics administration, and all documentation must align with DoD authorized units of issue. The solicitation, issued under SPE2DS-26-T-268R, was posted July 23, 2026, with responses due by July 29, 2026, and falls under NAICS code 334511 for medical device manufacturing, procured by the Department of Defense’s Medical Supply Chain for surgical and field support operations.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

SENSOR, OXYGEN MONITORIThe contract involves the procurement of three oxygen monitoring sensors with plastic housings and electrical cells, designated by NSN 6515-01-318-1535, for delivery within 84 days to APO 96260-5479. Each unit must be individually sealed in a protective container to prevent damage and shipped in commercial exterior packaging suitable for safe transport via common carrier at the lowest cost. Packaging and marking must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and all items must be properly identified in accordance with this standard. The sensors have a non-extendable shelf life of 96 months and are classified as a Type I (Code U) item under RS026 requirements. The solicitation incorporates applicable technical and quality standards from the DLA Master List, and suppliers must provide the source and part number being offered. The contract is subject to covered defense information protocols under RD003 and requires removal of government identification from non-accepted supplies per RQ011. Packaging must adhere to DLA requirements as outlined in section B of SPE2DS-26-T-262T, and all bids must be submitted by the response deadline of July 29, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

about 21 hours ago

DEADLINE

TEST STRIPS AND COLORThe contract specifies the procurement of urine test strips and color charts capable of detecting bilirubin, blood, glucose, ketone, leukocytes, nitrite, pH, protein, specific gravity, and urobilinogen, each packaged in bottles of 100 strips per unit, with a total quantity of two units required. The items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements and are subject to medical packaging standards, including compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must ensure protection against damage and safe delivery via common carriers at the lowest cost, with all labels clearly displaying the date of manufacture, expiration date, contract number, and lot number in accordance with MMS1C guidelines. A shelf-life requirement of 18 months is mandatory and non-extendable, with no more than two months allowed to have elapsed between the date of manufacture and the date of delivery to the government. The items are classified as a TYPE I (CODE K) item under the shelf-life specification, and all labeling must conform to the latest revision of MMS1C. The solicitation number is SPE2DS-26-T-263E, issued on July 23, 2026, with responses due by July 29, 2026, and delivery required within five days of award. The contracting office is under the Department of Defense’s Medical Supply Chain, with Mary-Kathryn Donahue designated as the primary point of contact. The NSN is 6550-01-221-5400, and the NAICS code is 325412, identifying the industry as medical and surgical instrument manufacturing.

Pharmaceutical Preparation Manufacturing

POSTED

about 21 hours ago

DEADLINE

APPLICATOR, DISPOSABLEThe contract specifies the procurement of disposable applicators with an overall maximum length of 4.000 inches and a nominal shaft diameter of 0.200 inches, featuring a round tip and either rayon or cotton head impregnated with povidone-iodine. Each unit must be individually sealed in a suitable container to prevent damage or breakage and packed in commercial shipping containers that ensure safe delivery via common carrier at the lowest cost to the designated destination. All items must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and markings must adhere to the latest edition of this standard available through DLA Troop Support. The unit of issue is a package (PG) containing 75 units, and packaging must meet MIL-STD-2073-1E requirements. The item is regulated by the FDA under Class I, with regulation 880.6025, and while a 510(k) is not required, compliance with registration, listing, labeling, and GMPs is mandatory. The contract mandates no substitutions and requires bidders to provide the source and part number, with approved suppliers including Cardinal Health 200, LLC, Medline Industries, LP, and NICE-PAK Products Inc. Delivery is FOB destination within 20 days, with zero variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The NSN is 6515-01-316-9295, and the solicitation number is SPE2DS-26-T-266C, with a response deadline of July 29, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

about 21 hours ago

DEADLINE

SPLINT, LEGThe contract is for a three-panel knee immobilizer splint, designed for post-operative immobilization of injured knees, with a universal left or right fit suitable for most patients. It features polyurethane foam and mesh side panels with trimmable design, contoured stays, and five hook-and-pile closures for secure fit, accommodating thigh circumferences up to 32 inches and a standard length of 24 inches. The product includes a closed patella design and is issued as a single unit. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List, with compliance determined by the revision in effect on the solicitation or award date, depending on acquisition size. Packaging must meet DLA standards, and non-accepted supplies must have government identification removed. Bidders must clearly state the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-265B, has a response deadline of July 29, 2026, with performance delivery expected within 20 days after order. The contracting office is the Department of Defense, Medical Supply Chain, located at Fort Bliss, Texas, with James Burke as the primary point of contact.

Surgical and Medical Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

MASK, ORONASALThe contract specifies the procurement of a single adult oronasal resuscitator mask with a latex-free blue cuff, identified by NSN 6515-01-036-9070 and part numbers from approved manufacturers including AMBU INC, CARDINAL HEALTH, and MEDLINE INDUSTRIES. The unit of issue is each, with a quantity of one, and delivery is required within 20 days FOB destination to Fort Bliss, Texas. All packaging must comply with DLA Packaging Requirements, ASTM D3951, and the Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring each unit is sealed in a protective container and shipped in commercial exterior packaging suitable for safe carrier delivery at the lowest rate. Markings on all containers must include the MFD prefix followed by the lot and manufacture date, along with NSN, manufacturer, CAGE code, contract number, and expiration or retest date. The product is FDA-regulated and requires pre-award referral via EBS for confirmation. Shipping must be traceable and cannot use parcel post, with all shipments directed to the specified Fort Bliss delivery point. The contract is governed by DLA’s Master List of Technical and Quality Requirements, and the solicitation is issued under SPE2DS-26-T-268G with a response deadline of July 29, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

NEEDLE, INTRAOSSEOUSThe contract specifies the procurement of intraosseous needles, specifically the EZ-IO Needle and Stabilizer Kit, identified by NSN 6515-01-648-7346, with a quantity of four units. Each unit includes a 15 gauge 25 mm needle, an EZ-stabilizer dressing, an EZ-connect IV extension set, a needleVISE-1 port, and a patient wristband. The items must have a shelf life of 48 months, with no more than seven months elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with commercial standards, ensuring each unit is sealed in a protective container and shipped in suitable exterior packaging that ensures safe delivery at the lowest cost to the designated point of delivery. All items must be labeled with the NSN, manufacturer and CAGE code, manufacturing and expiration dates, and contract or lot number. Marking must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-265X, requires delivery within 20 days after award and is subject to the DLA Master List of Technical and Quality Requirements, with compliance mandatory for all technical and quality specifications referenced by R or I numbers. The contracting office is the Department of Defense’s Medical Supply Chain, with the place of performance listed as FPO, 96694, and points of contact provided for inquiries.

Surgical and Medical Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

DRAINAGE KIT, CLOSED SUThe contract is for the procurement of 3 pack units of a closed suction Jackson-Pratt drainage kit, each containing 10 disposable drainage units with a 100 mL reservoir and a radiopaque 97.5 cm long, 10 mm wide drain tube. The item is manufactured by Cardinal Health 200, LLC under part number SU130-1361 and is classified as a Class I medical device regulated by the FDA, requiring compliance with registration, listing, labeling, and good manufacturing practices. The product has a non-extendable shelf life of 60 months and must be packaged and marked in strict accordance with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129. Each unit must be sealed in a protective container and shipped in commercial exterior containers ensuring safe delivery at the lowest cost to the destination. Delivery is required FOB destination within 20 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The shipment must be traceable, excluding parcel post, and delivered to Fort Bragg, North Carolina. The NSN is 6515-01-341-4523, and the purchase request number is 7017584396. The contract, issued under SPE2DS-26-T-262V, is part of a federal acquisition governed by DLA technical and quality requirements, with all packaging, marking, and logistical instructions aligned with DLA standards for medical acquisitions.

Surgical and Medical Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

APPLICATOR, DISPOSABLEThe contract specifies the procurement of 100 disposable povidone-iodine applicator swab sticks, packaged in two units of issue, each containing 50 applicators. Each unit must be individually sealed in a protective container to prevent damage or breakage, and all units must be packed in commercial shipping containers suitable for safe delivery via common carrier to the designated point of performance in APO, ZIP 96319-5024, at the lowest possible shipping cost. The product must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all labeling must include the manufacturer’s date, expiration or retest date, and the contract or lot number, following the latest revision of MMS1A. The product must have a minimum shelf life of 15 months, with no more than two months having elapsed between the manufacturer’s date and delivery to the government. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable specifications identified by R or I numbers. The solicitation, issued under contract number SPE2DS-26-T-265P, requires bidders to disclose the source and part number being supplied, and responses are due by July 29, 2026, with delivery due within 20 days after award.

Surgical Appliance and Supplies Manufacturing

POSTED

about 21 hours ago

DEADLINE

PENCIL, ELECTRODE, ELECTThe contract specifies the procurement of a sterile, disposable electrosurgical pencil electrode designed for use with the CONMED System 5000, featuring a polytetrafluoroethylene handle, latex-free construction, a push-button switch, a 1-inch ultraclean blade, and a 10-foot cable. Each unit is packaged in a sealed container to protect against damage and must be shipped in commercial exterior containers suitable for safe delivery at the lowest cost to Fort Bragg, North Carolina. The product must have a 60-month shelf life, with no more than nine months elapsed between manufacture and government delivery. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and labels must include the NSN 6515-01-575-6486, manufacturer and CAGE code, date of manufacture or expiration, and contract or lot number. The unit of issue is a package of 40 units, and bidders must clearly identify the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-264A, requires compliance with DLA’s Technical and Quality Requirements, includes provisions for handling covered defense information, and mandates removal of government identification from non-accepted supplies. The contract was posted on July 23, 2026, with a response deadline of July 29, 2026, and delivery is required within five days of award.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

ADHESIVE TAPE, SURGICALThe contract specifies the procurement of surgical adhesive tape measuring 6 inches wide by 10 yards long, packaged in units of 12 rolls per package, for a total quantity of three packages. The product must be Medipore brand and comply with stringent shelf-life requirements, including a mandatory 60-month shelf life from the date of manufacture, with no more than 51 months having elapsed between manufacturing and delivery to the government. All labeling must conform to the latest revision of MMS1A and clearly display the manufacturer’s date, expiration or retest date, and the contract and lot numbers. The item is governed by multiple technical and quality requirements, including RS023 for non-extendable shelf-life control, RD003 for potential covered defense information, RP001 for DLA packaging standards, and RQ011 regarding removal of government identification from non-accepted supplies. Bidders are required to provide the specific source and part number being supplied, and the procurement is linked to NSN 6510-01-588-1947 under solicitation SPE2DS-26-T-263F, with a response deadline of July 29, 2026, and a delivery requirement within five days of award to Fort Bragg, North Carolina. The contract falls under NAICS code 322211 and is managed by the Department of Defense’s Medical Supply Chain.

Corrugated and Solid Fiber Box Manufacturing

POSTED

about 21 hours ago

DEADLINE

CUTTER, LINDEMANNThe contract specifies the procurement of five disposable 12 mm Lindemann Cutter II HI-LINE XS instruments under solicitation SPE2DS-26-T-264S, with a unit price of $5.00 and a total value of $25.00. The item is classified under NSN 6515-01-549-6161 and is regulated by the FDA, requiring the contracting official to refer the bid to a product specialist for confirmation, including details on the bidder, manufacturer, part number, and description. The equipment must be supplied with clear source and part number identification, with eligible manufacturers including Aesculap, Inc. and Trillamed LLC. All packaging must comply with commercial standards as specified in the procurement document, ensuring sealed unit containers protect against damage and shipping containers enable safe, cost-effective delivery to the destination. Medical Marking Standard No. 1 replaces MIL-STD-129 as the governing marking requirement, and copies must be obtained directly from DLA Troop Support or via the DLA website. Delivery is required within 20 days FOB destination to the USNS COMFORT, FPO AE 09566-4008, with no variance allowed in quantity. The contract requires palletization per DLA packaging guidelines and references specific logistics protocols for transportation and shipping. The response deadline is July 29, 2026, with an original required delivery date of July 22, 2026, and technical and quality requirements are incorporated by reference from the DLA Master List.

Surgical and Medical Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE