Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

STIFFENER, AIRCRAFT

Active
SPE4A7-27-T-2243Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A7-27-T-2243 is issued by the Defense Logistics Agency (DLA) for the procurement of one aircraft chord lower stiffener, identified by NSN 1560-01-675-9534. The requirement is governed by NAICS code 336413 and specifies a delivery timeframe of 152 days after receipt of order, with a need ship date of April 6, 2027. The item is to be delivered FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. Technical specifications and engineering exceptions are detailed in drawing EI016759534, and the contract incorporates various DLA Master List technical and quality requirements, including physical identification and bare item marking per RQ017. The contract mandates strict adherence to cybersecurity and export control standards, including CMMC Level 2 certification, DFARS 252.204-7012 for safeguarding covered defense information, and ITAR/EAR regulations for technical data. Quality assurance requires the manufacturer's inspection system to comply with ISO 9001:2015 or an equivalent standard, with inspection and acceptance occurring at the origin. Packaging must follow ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, with all labeling complying with MIL-STD-129. Payment and invoicing are to be processed electronically through the Wide Area Workflow (WAWF) system. Quotations are due by November 4, 2026.

General Info

DLA solicitation for one aircraft chord lower stiffener, due by November 4, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

1

RFQ SPE4A7-27-T-2243

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV
Office AddressUSA
Contacts
Shante'l Wyche
+1 (555) 000-0000

Full Description

Show more
STIFFENER,AIRCRAFT
CHORD LOWER
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
ENGINEERINING NOTES/EXCEPTIONS LOADED UNDER DWG# EI016759534
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS
SPE4A7-27-T-2243
SECTION B
252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1560-01-675-9534 Quantity: 1 EA Purchase Request: 7018680947QTY: 1 Delivery: 152 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
Aircraft Windshield Panel Supplier (NSN 1560015210182)This subcontract involves the fabrication and supply of 104 new, unused aircraft windshield panels for prime contractors supporting DLA supply contracts. The supplier must produce the panels to the technical specifications of NSN 1560015210182, utilizing precision molding equipment and aviation-grade transparent materials. To be eligible, the contractor must be an OEM or an approved source with a valid CAGE code. The contract mandates strict adherence to DPAS regulations and requires all items to be marked according to MIL-STD-129. Managed by the Department of Defense under the DLA Weapons Support ASC, the project falls under NAICS code 336413. Responses for this requirement are due by November 4, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Manufacturer of Wiper Plate Assembly (PN 627915-1)This subcontract involves the fabrication and assembly of two Wiper Plate Assemblies (PN 627915-1) for prime contractors supporting DLA Weapons Support ASC projects. All manufacturing must strictly adhere to Naval Air Warfare Center Drawing 627915 Rev C and TDP Rev B Gen 5, with a specific prohibition against the use of additive manufacturing. Final products must be inspected and packaged according to MIL-STD-2073-1E standards. To be eligible, the manufacturer must maintain SAE AS9003 or ISO 9001 quality systems and hold a valid JCP certification to access necessary technical data. The project is managed under the Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Div, with performance located in Tracy, California. Responses are due by November 5, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Precision Manufacturing of Retractor AssembliesThis subcontract involves the precision manufacturing and assembly of 119 Retractor Assemblies and Weapon Cradle Adapters for prime contractors under Department of Defense DLA supply contracts. The work requires strict adherence to Basic Drawing NR 30003 556AS164 Revision H and TDP Rev A Gen 1, utilizing precision CNC machining and specialized assembly jigs. Performance will take place in New Cumberland, Pennsylvania. To be eligible, the contractor must be an OEM-approved source or successfully obtain OEM approval. Additionally, the provider must maintain rigorous cybersecurity standards, ensuring full compliance with CMMC Level 2 and NIST SP 800-171. Responses for this requirement are due by November 9, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
Manufacturing of Aircraft Ground Servicing CoversThis subcontract involves the manufacturing of aircraft ground servicing covers for prime contractors supporting DLA Troop Support supply contracts. The scope of work requires the fabrication of 24 covers per NSN 1730016922679 and P/N 23060204, with all production adhering to the DLA Master List of Technical and Quality Requirements. A critical mandate of the agreement is strict compliance with the Berry Amendment to ensure all materials are sourced domestically. Managed under NAICS code 336413 for the Department of Defense, the project is overseen by Construction & Equipment Manu & Con. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 28, 2026, with a response deadline set for November 9, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
Manufacturing of Cam Assembly, Cove Lip DoorThis subcontract involves the manufacture of two completed and inspected Cam Assemblies for Cove Lip Doors, supporting aerospace projects for the DLA Weapons Support ASC. The work requires forging and precision machining in strict accordance with Basic Drawing NR 81205 65-18455 Rev B, necessitating the use of industrial forging presses and CNC machining centers. Performance will take place at Tinker AFB. To be eligible, the contractor must maintain specific high-level certifications, including JCP certification, a Boeing Rights Guard License, and CMMC Level 2 compliance. The opportunity was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 336413.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Supply of Actuator Ring Sets (NSN 1650011934050)This subcontract involves the supply of 104 Critical Application Item actuator ring sets, identified by NSN 1650011934050, for prime contractors supporting Defense Logistics Agency aviation supply contracts. The contractor is responsible for manufacturing or sourcing part number C5791-30 in strict accordance with Tactair Fluid Controls Inc specifications. To ensure operational readiness and safety, all units must undergo quality inspections following MIL-STD-1916 and MIL-STD-105/ASQ Z1.4 standards. Additionally, the contractor must adhere to ASTM D3951 and MIL-STD-129 requirements for the packaging and labeling of the items before delivery.
Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Manufacture of Packing with Retainer (P/N [phone hidden])This subcontract involves the precision manufacture of 29 Packing with Retainer assemblies for the Department of Defense under the DLA Weapons Support Nuclear Reactor Program. The components must be machined to meet Honeywell Aerospace part number [phone hidden] and NSN 5330-01-721-8818 specifications. Performance will take place in New Cumberland, Pennsylvania. Strict adherence to quality and safety standards is required, specifically compliance with RA001 quality requirements for Critical Application Items and NAVSEA 5100-003D mercury-free mandates. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
Aircraft Swaging Sleeve FabricationThis subcontract involves the fabrication of 734 precision aircraft swaging sleeves for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The contractor is responsible for utilizing CNC machining or swaging equipment and aerospace-grade alloys to meet strict aerospace tolerances for NSN 4030-00-641-3921. In addition to the finished sleeves, the provider must deliver product verification test samples. Compliance requirements are stringent, necessitating CMMC Level 2 certification and adherence to ITAR and EAR regulations. All work must be performed in accordance with MIL-STD-1916 or ASQ H1331 standards. The solicitation was posted on October 28, 2026, with a response deadline of November 7, 2026, falling under NAICS code 336413.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
Aerospace-Grade Alloy SupplierThis subcontract involves the supply of certified aerospace-grade raw materials to prime contractors supporting Department of Defense Construction and Equipment MRO SVC I contracts. The supplier is responsible for providing alloys that strictly adhere to technical specifications for NSN 4930-01-552-0232. To ensure full regulatory compliance, the provider must furnish Mill Test Reports verifying that all materials meet the requirements of the Buy American Act and the Berry Amendment. The performance of this contract will take place in Tracy, California, under NAICS code 336413. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for November 9, 2026.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
Supply of Critical Fluid Filter Elements (NSN 1650-01-669-3854)This subcontract involves the supply of four critical fluid filter elements, specifically Boeing part number 1732030 and NSN 1650-01-669-3854, for prime contractors under the Department of Defense DLA Weapons Support ASC. The contractor is responsible for manufacturing or sourcing these elements in strict accordance with TDP Rev A Gen 3 and QAP 13873. Performance takes place at Tinker AFB and requires adherence to ISO 9001:2015 quality systems and MIL-STD-1916 sampling standards. Essential compliance requirements include FAA Airworthiness Approval and adherence to DFARS Buy American regulations. All delivered units must be accompanied by full traceability and comprehensive airworthiness documentation to ensure flight safety and regulatory alignment. The opportunity is categorized under NAICS code 336413.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Supply of Dual Breakaway, Aux (NSN 1680015876928)This HUBZone set-aside subcontract involves the supply of seven Dual Breakaway, Aux units (NSN 1680015876928) for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The contractor is responsible for manufacturing or sourcing Part Number 21901-939, which is designated as a Critical Application Item. Delivery is required FOB Origin to New Cumberland, Pennsylvania. Strict adherence to quality and regulatory standards is mandatory, including quality control per MIL-STD-1916 or ASQ H1331 and marking and labeling according to MIL-STD-129 and MIL-STD-130 IUID. Additionally, the provider must maintain Buy American Act compliance and complete a CMMC Level 2 Self-Assessment. The response deadline for this requirement is November 5, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Aircraft Structural Web Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Aircraft Structural Component Web, specifically Boeing part number 5-95518-2003, for prime contractors supporting Defense Logistics Agency supply contracts. The project requires the use of aerospace-grade structural materials and precision machining in strict accordance with the DLA Master List of Technical and Quality Requirements RA001. To be eligible, the supplier must maintain a CMMC Level 2 self-assessment and hold certification in either ISO 9001 or SAE AS9003 quality systems. The final deliverable consists of one structural web that is properly packaged and marked. This opportunity is categorized under NAICS code 336413 and is managed by the Department of Defense.
Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 331210
New
DIBBS
Raw Material Supply for Sleeve BushingsThis subcontract involves the sourcing and delivery of certified raw alloy or material stock for prime contractors supporting DLA Weapons Support ASC projects. Specifically, the provider is responsible for delivering material stock for NSN 5365-01-622-5565 to the manufacturer, ensuring all shipments are accompanied by Mill Test Reports to maintain compliance with the DLA Master List of Technical and Quality Requirements. Depending on the restricted specifications of the materials, JCP certification may be required. The project is managed under the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Hill AFB. The opportunity is categorized under NAICS code 331210, with a response deadline set for November 5, 2026.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
DIBBS
Manufacturing of Sleeve Bushings (NSN 5365-01-622-5565)This subcontract involves the precision CNC machining of 12 sleeve bushings under NSN 5365-01-622-5565 for the Department of Defense, specifically the DLA Weapons Support ASC. The selected manufacturer must execute a First Article Test within 90 days and ensure all deliverables comply with MIL-STD-129 and MIL-STD-2073-1E standards. Final delivery of the finished units is required at the DLA Distribution Depot in Hill, Utah. To be eligible, the contractor must hold SAE AS9003 or ISO 9001 certification, be part of the US/Canada Joint Certification Program, and maintain CMMC Level 2 compliance. The project falls under NAICS code 332710, with a response deadline of November 5, 2026.
Machine Shops

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
Supplier of GraCo Wiper ElementsThis subcontract involves the supply of GraCo Part Number 160342 wiper elements to prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work requires the delivery of commercial-off-the-shelf hardware along with the necessary certificates of conformance to guarantee full compatibility with Naval Air Warfare Center specifications. Managed by the Department of Defense under NAICS code 332999, the contract is associated with the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract is designated for Tracy, California, with a response deadline set for November 5, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325412
New
DIBBS
Supply of Electrical Insulation Tape (NSN 5970-01-012-4280)This subcontract involves the supply of electrical insulation tape, identified by NSN 5970-01-012-4280, for prime contractors working on DLA Weapons Support ASC projects. The contractor is required to provide two rolls of tape delivered FOB Origin to Evenes Airbase. All materials must strictly conform to technical specification BASIC CID A-A-59474D, Revision D, and adhere to MIL-STD-2073-1E and RP001 for packaging and MIL-STD-129 for marking. To be eligible, the supplier must hold either SAE AS9003 or ISO 9001 certification and maintain full compliance with DFARS 252.204-7012. This procurement is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with a response deadline set for November 5, 2026.
Pharmaceutical Preparation Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
Manufacturing and Supply of Spacer, Sleeve (NSN 5365010716787)This subcontract involves the manufacture and supply of 6,250 units of Spacer, Sleeve (NSN 5365010716787) for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. All parts must be produced in accordance with the DLA Master List of Technical and Quality Requirements and delivered FOB Origin from New Cumberland. The contractor is required to strictly adhere to the Buy American Act and the Berry Amendment. Additionally, all packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and PPP-H-1581 standards. The project falls under NAICS code 332510.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423840
New
DIBBS
Supply of Aircraft I/O Panel Assemblies (NSN 1680-01-548-3582)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, requires the procurement and delivery of eight Aircraft I/O Panel Assemblies, part number 5353370-001. The selected provider must ensure all units are packaged and marked in strict accordance with RP001, MIL-STD-2073-1E, RQ017, and MIL-STD-129 standards. Performance will take place in New Cumberland, Pennsylvania. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 423840. To be eligible, contractors must maintain Buy American Act compliance and complete a CMMC Level 2 Self-Assessment. Responses are due by November 5, 2026.
Industrial Supplies Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332111
New
DIBBS
Supply of Forging-Grade Aerospace AlloyThis subcontract involves the supply of raw forging-grade aerospace alloy to prime contractors supporting DLA Weapons Support ASC projects for the Department of Defense. The scope of work requires the delivery of certified raw material in the form of billets or pre-forms that strictly adhere to the specifications outlined in Drawing NR 81205 65-18455. To ensure quality and compliance, the provider must furnish all necessary Material Test Reports and Certificates of Conformance. The project is managed under NAICS code 332111 and is associated with the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract is centered at Tinker AFB, zip code 73145-8000. Interested parties should note the response deadline of November 5, 2026, following the posting date of October 28, 2026.
Iron and Steel Forging

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541380
New
DIBBS
NDT Inspection for Cam AssemblyThis subcontract involves providing Non-Destructive Testing services for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work focuses on conducting structural integrity inspections of forged and machined cam assemblies utilizing ultrasonic, radiographic, or penetrant methods. All work must be performed in accordance with RQ040 NDT Accreditation Requirements, and the contractor is responsible for delivering certified inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. Interested parties should note the response deadline of November 5, 2026, and the classification of the work under NAICS code 541380.
Testing Laboratories and Services

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332721
New
DIBBS
Grooved, Headed Pin Supplier (NSN 5342-13-122-9420)This subcontract involves the manufacture or procurement of 55 new, unused grooved, headed pins under NSN 5342-13-122-9420 for critical applications. The supplier will support prime contractors delivering to the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. Delivery is required FOB Destination. The supplier must adhere to strict quality control and packaging standards, including MIL-STD-2073-1E and MIL-STD-129, with sampling conducted per MIL-STD-1916 or ASQ. Additionally, the contractor is required to maintain SPRS assessment compliance. The opportunity is categorized under NAICS code 332721, with a response deadline of November 7, 2026.
Precision Turned Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 10 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS