Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

STOP LIGHT-TAILLIGH

Active
SPE4A6-26-T-05DRFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of five STOP LIGHT-TAILLIGHT units with NSN 6220-99-555-6410 under solicitation SPE4A6-26-T-05DR, issued by the Department of Defense’s ASC Commodities Division. The item is supplied by J.C. Bamford Excavators Limited under part number 347/20073, with a unit price of $5.00 and a total contract value of $25.00. Delivery is required within 158 days, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. Packaging must adhere to MIL-STD-2073-1E with specific preservation methods and unit container codes, while marking follows MIL-STD-129 including the special fragile designation. Palletization complies with DLA packaging requirements. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with sampling mandated under MIL-STD-1916 or an equivalent zero-based plan. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively or with AQLs of 0.1, 1.0, and 4.0. Non-conforming items must have government identification removed, and bare item marking is required. The contract incorporates tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. All transportation and shipping instructions follow DLA procedural notes C19 and C20. The solicitation was posted July 17, 2026, with a response deadline of July 22, 2026, and the required delivery date is December 23, 2026. Primary point of contact is Amanda Stewart at DLA, with the procurement governed under NAICS code 336320.

General Info

Procurement of five STOP LIGHT-TAILLIGH units under DLA solicitation due July 17, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336320 - Motor Vehicle Electrical and Electronic Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-05DR.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Amanda Stewart
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STOP LIGHT-TAILLIGH
STOP LIGHT-TAILLIGHT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SPE4A6-26-T-05DR
SECTION B
J.C. BAMFORD EXCAVATORS LIMITED K7599 P/N 347/20073
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017383966 0001 EA 5.000
NSN/MATERIAL:6220995556410
DELIVERY (IN DAYS):0158
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:01 -01 Fragile
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
TECH DATA HISTORY:
11/01/2021 SENT IN 339 REQUEST DSCP-FC-22-03200 TO AZ. RSW ON HOLD. M. DIAZ/FCSB/X8685
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
SPE4A6-26-T-05DR
SECTION B
PR: 7017383966 PRLI: 0001 CONT’D
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:12/23/2026 Original Required Delivery Date:12/23/2026
SPE4A6-26-T-05DR NSN/Part Number: 6220-99-555-6410 Quantity: 5 EA Purchase Request: 7017383966QTY: 5 Delivery: 158 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336320
New
DIBBS
Vehicular Seat Manufacturer or DistributorThe contract involves the supply of one military-spec vehicular seat identified by NSN 2540015914663, manufactured or distributed by a contractor meeting all Department of Defense procurement standards. The item must fully comply with Defense Federal Acquisition Regulation Supplement (DFARS) and Defense Priority Allocation System (DPAS) requirements to ensure priority handling and regulatory adherence throughout the supply chain. The contract is categorized as a subcontract under NAICS code 336320, indicating it falls within the Automotive Parts and Accessories Manufacturing sector, and is administered by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 17, 2026, and is accessible through the DIBBS system, with performance tied to the broader military logistics framework without specified geographic limitations. All deliverables must meet stringent military specifications to ensure compatibility, durability, and safety in operational environments.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

N/A
View Details
NAICS: 336320
New
DIBBS
Manufacture of Navigational Aircraft Lights (NSN 6220-01-283-5584)
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 336320
New
DIBBS
Headlight Component Manufacturing and SupplyThe contract requires the manufacture and supply of two headlight units identified by national stock number 6220-01-735-8585 and part number 725-1020-004, with strict adherence to Defense Logistics Agency technical specifications, packaging requirements, and labeling standards. All deliverables must meet the rigorous quality and compliance benchmarks established by the Department of Defense to ensure operational readiness and interoperability. The work is to be performed at Fort Hood, Texas, with a zip code of 76544, and is classified as a subcontract under the NAICS code 336320, which covers automotive lighting system manufacturing. The solicitation was posted on July 16, 2026, with a response deadline of July 27, 2026, and is administered by the Defense Logistics Agency under the Department of Defense. Although no specific set aside status or point of contact is provided, interested parties must submit proposals through the official DIBBS platform using the provided link. Compliance with all federal acquisition regulations, delivery timelines, and documentation standards is mandatory, and failure to meet these requirements may result in disqualification or contract termination. The units are critical components intended for military use, necessitating precision engineering and durable construction suitable for demanding operational environments.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336320
New
DIBBS
Manufacture of Air Brake ChambersThe contract requires the full production of 62 air brake chambers to meet stringent military specifications, encompassing every phase from sourcing materials to final assembly, testing, and adherence to approved packaging and labeling standards. All work must comply with the technical and quality requirements dictated by defense protocols, ensuring the components are fit for military vehicle use. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under NAICS code 336320 for motor vehicle parts manufacturing. Performance is specifically required at the designated location in Texarkana, Texas, with the delivery deadline set for July 27, 2026, following a solicitation posted on July 16, 2026. The contracting activity originates from the Department of Defense under the Land Supplier Operations Vehicle Support office, emphasizing the mission-critical nature of the component and the need for precise execution within the small business set-aside framework.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336320
New
DIBBS
LIGHT, NAVIGATIONAL,The contract pertains to the procurement of seven units of a navigational marine light identified by part number 3584209 and NSN 6220-01-525-8097, sourced from GLAMOX AQUA SIGNAL CORPORATION. The item is classified as a critical application product and must comply with stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards. Packaging and marking must adhere to MIL-STD-129 and RP001 specifications, with commercial packaging per ASTM D3951 required only if the item is non-hazardous under FED-STD-313; otherwise, hazardous material packaging per TQ requirement IP025 applies. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attribute verification levels are fixed at VII, IV, and II for critical, major, and minor characteristics respectively. Delivery is FOB origin with a strict quantity variance of plus or minus zero percent and inspection and acceptance to occur at destination. The required delivery date is October 14, 2026, with a 230-day acceptance delivery window, and the ship date must be no later than March 12, 2027. The item must be palletized and packed in accordance with DLA packaging directives, and all packaging must be properly labeled with the specified Unit of Issue and Quantity per Unit Pack. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation must follow DLAD Proc Notes C19 and C20. The solicitation number is SPE4A6-26-T-07EK, issued by the Department of Defense’s ASC Commodities Division, with Daniel Bailey as the primary point of contact, and the NAICS code is 336320 for marine engineering and navigational equipment manufacturing.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 336320
New
DIBBS
PIPE, EXHAUSTThe contract pertains to the procurement of exhaust pipes identified by NSN 2990-01-060-2569, with a total quantity of 115 units, under solicitation SPE7L5-26-T-4482, which is a total small business set-aside for NAICS code 336320. The items must be manufactured and delivered in strict compliance with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award date depending on acquisition size. Critical application standards govern the design, with reference drawings and technical data packages specifying exact part numbers and revision levels, including revisions dated through 2026. Ozone-depleting chemicals are categorically prohibited, and any substitute materials require prior approval unless explicitly authorized by the underlying specifications. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA packaging requirements, and all units must be marked with correct unit of issue and quantity per unit pack. Delivery is set for 304 days after award, with FOB origin terms, inspection and acceptance occurring at destination, and a strict zero percent quantity variance allowed. The items must be shipped to the designated distribution facility in Albany, Georgia, with a required ship date of May 28, 2027, and the original delivery deadline is October 14, 2026. Correspondence and inquiries should be directed to Mary Rowley at the provided contact details.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336320
New
DIBBS
ROTOR ASSEMBLYThe contract is for the procurement of 50,000 rotor assemblies with NSN 2920-01-602-4834 under solicitation SPE7L5-26-T-4509, issued by the Defense Logistics Agency through the Land Supplier Opns Engines office. Delivery is required within 183 days after receipt of order, with FOB destination at the DLA Distribution New Cumberland facility in Pennsylvania, where inspection and acceptance by the government will occur. The contract is structured as a firm-fixed-price acquisition under FAR 52.216-1 Alternate I, with no pricing details provided in the solicitation. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes ASTM D3951 for packaging, while packaging and labeling must fully comply with MIL-STD-129 for shipment and storage, including bar-coding and hazard communication standards. Hazardous materials are subject to labeling under 29 CFR 1910.1200 and supplemental requirements under DFARS 252.223-7001, with offerors required to disclose and submit labels for any applicable materials prior to award. Export-controlled technical data associated with the item is subject to ITAR or EAR restrictions, with access limited to contractors holding approved US/Canada Joint Certification Program status, having completed mandatory training, and received DLA approval. Contractual obligations include full compliance with cybersecurity standards per CMMC Level 2 and DFARS 252.204-7012, which mandate safeguarding covered defense information and reporting cyber incidents. Contractors must also adhere to NIST SP 800-171 assessment requirements, prohibitions on hexavalent chromium and ozone-depleting substances, and the use of WAWF as the exclusive invoicing system. Subcontracting is permitted under commercial product and service provisions, and small business representation is required under FAR 52.219-28 Alternate I. All contractors must maintain an active UEI and CAGE code, certify their size status, and disclose any provision of covered defense telecommunications equipment. No evaluation factors, weights, or award basis are specified, implying a potential LPTA approach, though this is not confirmed. Performance is governed by default, inspection, and changes clauses under fixed-price structure, with no option quantities or pricing included. Payment will be processed through DoDA
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336320
New
DIBBS
LIGHT, NAVIGATIONAL, AIRThe contract pertains to the procurement of 49 units of Light, Navigational, Aircraft equipment identified by NSN 6220-01-283-5584, with a total estimated value of $2,401.00 at $49.00 per unit. Delivery is required within 130 days of award, with FOB Origin terms meaning title and risk transfer upon shipment from the contractor’s location, and inspection and acceptance also occur at origin. Packaging and marking must adhere strictly to MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, container types, and labeling requirements such as the “01-01 Fragile” code and compliance with OSHA’s Hazard Communication Standard for any hazardous materials. Barcoding must conform to MIL-STD-129 specifications. The item is subject to export control under ITAR or EAR, restricting access and dissemination to only DLA-approved contractors who hold US/Canada Joint Certification Program certification, have completed mandatory export control training, and passed the DLA questionnaire. Cybersecurity requirements mandate compliance with NIST SP 800-171 and DFARS 252.204-7012, including CMMC Level 2 certification for handling controlled unclassified information, and prohibit the use of covered defense telecommunications equipment from restricted foreign sources. The contractor must use WAWF for all invoicing and receiving reports, and is subject to affirmative obligations under FAR and DFARS clauses covering equal opportunity, employment eligibility verification, combating human trafficking, sustainable products, hazardous material handling, whistleblower rights, and limitations on mandatory arbitration. The contract includes provisions for accelerated payments to small business subcontractors and requires the offeror to self-certify size status and socioeconomic classifications such as small business, HUBZone, or SDVOSB, with joint venture information and UEI/CAGE codes disclosed where applicable. No option quantities, detailed statement of work, or formal evaluation factors are specified, and the contract type remains to be determined by the contracting officer. All proposals must be submitted via DIBBS by the stated response deadline of July 24, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 336320
New
DIBBS
HEADLIGHTHoffman Engineering, LLC is contracted to supply two units of a headlight part, identified by NSN 6220-01-735-8585 and part number 725-1020-004, under solicitation SPE8E7-26-T-3361. The requirement is for delivery within 20 days of the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. The unit of issue is each, with a fixed quantity of two units at a price of $2.00 per unit, and no variance is permitted in delivery quantity. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, which override any commercial standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements, Federal Standard 313, and MIL-STD-129 for marking and labeling. Hazardous materials, if applicable, must follow TQ requirement IP025; non-hazardous items must be commercially packaged per ASTM D3951 unless superseded by DLA requirements. Palletization must adhere to RP001 guidelines. The headlight must be shipped using traceable means, explicitly excluding parcel post, to the specified delivery location at Fort Hood, Texas. All packaging and labeling must reference the correct unit of issue and quantity per unit pack as defined in the contract. The required delivery date is July 14, 2026, with the contract data indicating a solicitation posted on July 16, 2026, and a response deadline of July 27, 2026, suggesting the timeline is for future performance under active procurement channels. The point of contact for the contract is Kelly Mitchell at the Defense Logistics Agency.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336320
New
DIBBS
HOUSING, MECHANICAL DRIThe contract pertains to the procurement of 13 units of a housing assembly for injection advance, identified by NSN 3040-01-054-9730, under solicitation SPE7L1-26-T-847S issued by the Defense Logistics Agency’s Land Supply Chain under the Department of Defense. Delivery is required within 20 days after order, with FOB Origin terms meaning title and risk transfer upon shipment from the supplier’s location, and both inspection and acceptance must occur at the origin. The item is to be delivered to BTWHO0, Ordnance Readiness Development Center in Nantou County, Taiwan. All units must comply with stringent packaging standards specified under QUP:001 and MIL-STD-2073-1E, including controlled climate preservation (method 33, material code 09), standard unit container E5, and intermediate packing level B, all palletized per RP001. Marking and labeling must adhere to MIL-STD-129, requiring mandatory 2D barcoding for DoD logistics tracking, and hazardous materials must be labeled according to 29 CFR 1910.1200, with safety data sheets submitted prior to award. The technical data associated with the item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons without prior authorization, and only contractors with approved US/Canada Joint Certification Program status, completed training, and DLA authorization may access this data. The contract incorporates a comprehensive set of FAR and DFARS clauses tailored to defense procurement, including deviation-applied provisions covering equal opportunity for workers with disabilities, combating trafficking in persons, employment eligibility verification, sustainable product requirements, hazardous material identification, and authorization and consent for government use of intellectual property. Compliance with NIST SP 800-171 for cybersecurity is required, and subcontracting for commercial products is governed by a deviation allowing flexibility. The contractor must maintain an ISO 9001:2015-certified quality system and adhere to zero-defect sampling criteria under MIL-STD-1916, with critical, major, and minor attribute acceptance quality levels at 0.1, 1.0, and 4.0 respectively. Radioactive materials, if present, require prior written notification if exceeding thresholds of 0.002 µCi/g or 0.01 µCi per item and must
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336320
New
DIBBS
LEAD, IGNITION, ENGINThe contract pertains to the procurement of lead ignition components for engines under solicitation SPE7L5-26-T-4487, with a single line item for 8 units identified by NSN 2920-01-506-6332 and purchase request 7017529261, each priced at $8.00 for a total of $64.00. Delivery is required within 235 days from the award date, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, specifically at the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must comply with ASTM D3951 and must be marked and labeled per MIL-STD-129, with palletization following DLA Packaging Requirement RP001. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting ASTM standards. The supply must be delivered by March 20, 2027, with the original required delivery date set for October 14, 2026. The unit of issue is each, and the government’s authorized unit system applies. The contract is subject to DLA transportation procedures C19 and C20 for freight and first destination shipping, and removal of government identification from non-accepted supplies is required per RQ011. The solicitation was posted on July 16, 2026, with responses due by July 27, 2026, and is classified under NAICS code 336320 for engine components. The primary point of contact is Randy Ith at the Department of Defense under Land Supplier Operations Engines.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336320
New
DIBBS
LAMP UNIT, VEHICULARThe contract is for the procurement of 238 vehicular lamp units under NSN 6220013273225 and part number 8HB906 from OSHKOSH DEFENSE LLC or 1401152 from J. W. SPEAKER CORPORATION, with a unit price of $238.00 and a total contract value of $56,644. The items must be delivered within 45 days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit containers. Marking must follow MIL-STD-129, including the special fragile designation, and palletization must adhere to DLA packaging standards. The goods are to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified, and critical attributes are subject to the strictest verification levels. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via official DLA web portals, with revisions controlled by the solicitation or award date depending on acquisition size. Documentation for source approval is required under RC001. The contract was issued as a federal solicitation under SPE4A6-26-T-04VL, with a response deadline of July 21, 2026, and is classified under NAICS code 336320 for automotive parts manufacturing.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541330
New
DIBBS
Government First Article Inspection and TestingThe contract requires the performance of a first article inspection and testing on an aircraft structural fitting to ensure full compliance with drawing 7574876. This includes detailed dimensional measurements, verification of material specifications, non-destructive testing, and the preparation of a formal inspection report. All work must demonstrate adherence to the technical requirements outlined in the drawing and meet applicable quality standards for aerospace components. The effort is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses can bid, and it is classified under NAICS code 541330, which pertains to engineering services. The solicitation was posted by the ASC Commodities Division of the Department of Defense and is open for response until July 27, 2026, with no specific location provided for performance.
Engineering Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332312
New
DIBBS
Precision Manufacturing of Aircraft Structural FittingThe contract involves the precision manufacture of a critical safety aircraft structural fitting identified by Part Number S03-02-R-100, following the specifications outlined in drawing 7574876. The scope encompasses full production lifecycle activities including material sourcing, machining, heat treatment, and surface finishing, all required to meet stringent aerospace industry standards for structural integrity, durability, and safety compliance. All work must be performed in accordance with applicable aerospace quality and inspection protocols to ensure the component meets mission-critical performance requirements. This is a total small business set-aside under the SBA program as defined by FAR 19.5, with the NAICS code 332312 classifying it under forge and stamping manufacturing. The contract is issued under the Department of Defense’s ASC Commodities Division and is structured as a subcontract. Proposals must be submitted by the deadline of July 27, 2026, with the solicitation published on July 17, 2026. All manufacturing activities are expected to adhere to defense supply chain requirements, and the place of performance is not specified, implying flexibility as long as compliance and delivery obligations are met.
Fabricated Structural Metal Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection at OriginThe contract titled Quality Assurance and Inspection at Origin requires the contractor to perform inspection and acceptance of supplies at the point of production or packaging, in strict adherence to contract clause 52.246-9008. This work is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to participate as defined by the SBA and FAR 19.5. The NAICS code 541330 identifies the scope as ranging within architectural, engineering, and related services, indicating the nature of the quality assurance activities involves technical oversight and compliance evaluation rather than direct manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026, and is managed by the ASC Commodities Division within the Department of Defense, though specific point of contact and place of performance details are not provided. The contract emphasizes the importance of ensuring supplies meet required standards prior to shipment, with inspections conducted directly at the origin, which may include facilities across various locations. Compliance with the referenced clause mandates adherence to federal procurement quality assurance procedures, requiring detailed documentation, evaluation criteria, and acceptance protocols to be followed during inspection. The absence of explicit location or contact information suggests the contractor must be prepared to perform at any production or packaging site tied to the supply chain, and the lack of defined city or state for performance implies a potentially nationwide scope requiring logistical flexibility and readiness to deploy inspection personnel as needed. The contract is accessible through the DIBBS portal for further procedural details.
Engineering Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
ITAR/EAR Compliance and Export-Controlled Data HandlingThe contract mandates strict compliance with ITAR and EAR regulations for all suppliers and subcontractors handling export-controlled technical data, ensuring that only authorized entities with proper registration and documentation are engaged in work involving sensitive information. All parties must demonstrate adherence to U.S. export control laws as a condition of participation, with failure to comply potentially resulting in termination or penalties. The solicitation is designated as a Total Small Business Set-Aside under the SBA program, restricting eligibility to small businesses as defined by the NAICS code 541611, which pertains to management consulting services. The award is issued by the ASC Commodities Division under the Department of Defense, with responses due by July 27, 2026, and performance expected to occur under the terms of a subcontract agreement. Participation requires proactive verification of regulatory standing and ongoing compliance monitoring for the duration of the contract.
Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
Subcontracting Plan Compliance and Small Business OutreachThe contract requires the development and execution of a federal subcontracting plan designed to ensure compliance with Department of Defense regulations and Small Business Administration guidelines for maximizing participation by disadvantaged, minority, and women-owned businesses. The goal is to meet specific targets for DBE, MBE, and WBE subcontracting as mandated by the Federal Acquisition Regulation and SBA rules, with all activities aligned to a total small business set-aside under FAR 19.5. The work focuses on strategic outreach, monitoring, documentation, and reporting to demonstrate consistent adherence to small business utilization standards throughout the contract performance period. The solicitation, issued under NAICS code 541611 for management consulting services, is administered by the ASC Commodities Division within the Department of Defense and is open for response through July 27, 2026. All subcontracting efforts must be structured to promote equitable access and measurable outcomes for certified small, minority, and women-owned businesses, with full transparency and accountability required in tracking participation. The successful contractor will be responsible for designing, implementing, and sustaining a comprehensive subcontracting strategy that aligns with federal obligations and supports the agency's commitment to small business procurement goals.
Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332999
New
DIBBS
Critical Safety Item (CSI) Manufacturing and SupplyThe contract involves the manufacture and delivery of Critical Safety Items specified by the U.S. Navy, with stringent requirements for sourcing controls, component traceability, and full compliance with defense-specific technical and quality standards. These items are essential to mission-critical systems and must be produced under strict regulatory oversight to ensure reliability and safety throughout their lifecycle. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, and the NAICS code 332999 indicates the work falls under other fabricated metal product manufacturing. All production and delivery activities must adhere to military specifications, and suppliers are expected to implement robust documentation and audit-ready tracking systems for every component and process step. The solicitation was posted on July 17, 2026, with a deadline for responses on July 27, 2026, and is managed by the ASC Commodities Division under the Department of Defense. There is no specified place of performance, suggesting flexibility in manufacturing locations provided all requirements are met, and no point of contact is listed, implying inquiries must be directed through the official DIBBS portal referenced in the link. The nature of the work demands a high level of precision and accountability, with failure to meet traceability or compliance standards likely resulting in disqualification or contract termination. Suppliers must be prepared to demonstrate proven capability in handling sensitive defense components and maintaining data integrity across the supply chain.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Product Verification TestingThe contract requires the performance of in-process and final inspections on bushing assemblies in accordance with MIL-STD-1916 or ASQ H1331 standards, ensuring compliance with rigorous quality and verification protocols. The contractor is responsible for generating accurate test reports and providing full support to Government acceptance activities, demonstrating consistent adherence to defense-grade quality requirements throughout the production lifecycle. This work is critical to validating the integrity and functionality of components used in defense systems. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 541330, and issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026. While specific location details are not provided, the place of performance is tied to defense operations under the DLA umbrella, and all submissions must be made through the designated DIBBS portal. The contract emphasizes the need for qualified small business entities capable of delivering precise inspection services under strict military specifications.
Engineering Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 483112
New
DIBBS
Domestic and International Freight Logistics (U.S.-Flag Vessel Compliance)The contract requires the arrangement of domestic and international freight logistics for the shipment of bushing assemblies to locations within the continental United States, with strict adherence to U.S.-flag vessel requirements mandated by the Cargo Preference Act for all ocean freight portions. This ensures compliance with federal regulations that prioritize the use of American-owned and flagged vessels for the transportation of government cargo. The solicitation is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses certified by the Small Business Administration, and is classified under NAICS code 483112, which pertains to foreign ocean transportation. The opportunity was posted on July 17, 2026, with a response deadline of July 27, 2026, and is overseen by the ASC Commodities Division of the Department of Defense, with performance tied to U.S. domestic destinations. The requirement emphasizes logistical precision, regulatory compliance, and small business participation in fulfilling defense-related supply chain needs.
Deep Sea Passenger Transportation

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation ManagementThe contract requires the maintenance of fully auditable records to ensure complete traceability of material origin, certifications, inspections, and adherence to all Government traceability mandates, specifically in compliance with DFARS requirements. All documentation must support transparency and accountability throughout the supply chain, enabling verification of source materials and compliance with defense contracting standards. The contractor must implement systems and procedures capable of sustaining rigorous audit readiness and meeting every contractual obligation related to documentation integrity and regulatory compliance. This is a small business total set-aside subcontract under NAICS code 541611, issued by the Department of Defense’s ASC Commodities Division. Responses are due by July 27, 2026, and performance is expected to align with federal defense supply chain protocols. The contract emphasizes strict adherence to traceability standards and requires proven capability in managing complex documentation systems under federal oversight. While specific location details are not provided, all work must satisfy DoD requirements for origin verification and material accountability.
Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Marking, and Labeling ServicesThe contract seeks qualified small businesses to provide military-compliant packaging, preservation, and labeling services for bushing assemblies, adhering strictly to DLA and MIL-STD-129 standards. Essential requirements include accurate barcode application, application of special handling labels, and full compliance with defense logistics protocols to ensure traceability, durability, and readiness for military distribution. The work must be performed in accordance with federal regulations governing packaging integrity and labeling accuracy to support the Department of Defense’s supply chain standards. This is a total small business set-aside under NAICS code 493190, restricted exclusively to small businesses as defined by the SBA, and is issued as a subcontract by the ASC Commodities Division within the Department of Defense. Responses are due by July 27, 2026, with the solicitation posted on July 17, 2026, and all work expected to align with DLA’s logistical demands for defense components. The place of performance and point of contact details are not specified, but all proposals must demonstrate readiness to meet stringent military packaging and documentation requirements without deviation.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Bushing Assembly (NSN 5365-01-541-2220)The contract pertains to the manufacture and delivery of precision bushing assemblies identified by NSN 5365-01-541-2220, requiring strict adherence to military specifications throughout production. Work includes CNC machining to exact tolerances, comprehensive inspection processes, and full compliance with traceability and packaging standards mandated for defense applications. The contract is structured as a subcontract under a total small business set-aside, reserved exclusively for small businesses as defined by the SBA under FAR 19.5, with the NAICS code 332710 applicable to forged and stamped metal product manufacturing. The opportunity was posted on July 17, 2026, with responses due by July 27, 2026, and is issued by the ASC Commodities Division under the Department of Defense. Performance is expected to occur at an undefined location, and all deliverables must meet federal defense supply chain requirements, ensuring readiness for military use.
Machine Shops

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335931
New
DIBBS
Small Business and DBE/MBE/WBE Subcontracting ParticipationThis contract opportunity is designed to facilitate participation by small, disadvantaged, minority-owned, and women-owned businesses in supply or compliance roles under a prime contract managed by the ASC Commodities Division within the Department of Defense. The solicitation, identified by the NAICS code 335931, focuses on subcontracting engagement and does not specify a set-aside type, meaning it is open to qualified entities meeting ownership and size criteria without formal classification under a specific program. Interested businesses must respond by the deadline of August 16, 2026, to be considered for inclusion in the workforce supporting the prime contract's delivery and compliance requirements. The work will be performed without a specified geographic location, indicating potential flexibility in performance sites. Participation is facilitated through the DIBBS platform, where full details and submission protocols can be accessed.
Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 29 days
View Details