Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

STRAINER ELEMENT, SEDIM

Active
SPE7M3-26-T-7851Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for 421 units of a sediment strainer element, specifically a screen assembly for oil intake, identified by NSN 4730-00-287-1938. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under either ITAR or EAR, restricting any disclosure or transfer of technical data to foreign persons or entities without prior authorization from the Department of State or Department of Commerce, and DFARS 252.225-7048 applies. Only DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and a validated DLA questionnaire may access the controlled data. Packaging must comply with DLA procurement standards, inspection and acceptance occur at origin, and non-accepted supplies must have all government identification removed. Cybersecurity compliance requires CMMC Level 2 certification by a certified third-party assessment organization. The solicitation number is SPE7M3-26-T-7851, with a response deadline of August 17, 2026, and delivery is due 154 days after contract award. Performance location is Anniston, Alabama, with William Cain of the Fluid Handling Division, Department of Defense, listed as the primary point of contact.

General Info

421 sediment strainer elements, ITAR/EAR controlled, CMMC Level 2, delivery in 154 days, Anniston, Alabama.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

7 FRANKFORD AVE BLDG 362, ANNISTON, AL, 36201-4199, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M3-26-T-7851 for DLA Land and Maritime Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
William Cain
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STRAINER ELEMENT,SEDIMENT
STRAINER ELEMENT, SEDIMENT (SCREEN ASSEMBLY, INTAKE OIL)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4730-00-287-1938 Quantity: 421 EA Purchase Request: 7017604261QTY: 421 Delivery: 154 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
Manufacturing of Critical Aircraft Structural Fitting
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332996
New
DIBBS
Filter Element Manufacturing & SupplyThe contract requires the manufacture and supply of intake air cleaner filter elements that strictly comply with military standards MIL-STD-2073-1E for packaging and handling and MIL-STD-129 for labeling, as specified under the DLA Master List R-number RA001. This is a subcontract action set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside program, as defined by FAR 19.5, ensuring eligibility is limited to qualifying small business concerns. The NAICS code 332996 applies, indicating the work falls under Other Miscellaneous Fabricated Metal Product Manufacturing, aligning with the specialized production of these filtration components. The solicitation was posted on August 5, 2026, with a response deadline of August 20, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. All deliverables must meet exacting military specifications for performance, packaging, and labeling to ensure compatibility and reliability in defense applications. The place of performance and point of contact details are not specified in the provided data, but all work must be executed in accordance with DLA requirements and submitted through the official DIBBS platform at the provided UI link.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332996
New
DIBBS
Supply of Critical Application Parts Kit for Hydraulic JackThe contract calls for the procurement and delivery of a critical application-grade parts kit specifically designed for a hydraulic jack, with strict adherence to military packaging, labeling, and hazardous material handling standards. All components must meet rigorous performance and safety specifications to ensure operational reliability in demanding environments, and the entire kit must be compliant with Department of Defense requirements for secure and standardized logistics handling. The work is subject to full compliance with federal regulations governing the transport and documentation of hazardous substances, and the packaging must be engineered to protect the integrity of the parts through all phases of shipment and storage. This subcontract is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside authority, with the North American Industry Classification System code 332996 indicating a focus on other fabricated metal product manufacturing. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting office operates under the U.S. Department of Defense, and the procurement is being managed through the Defense Logistics Agency’s DIBBS platform, highlighting its importance within military supply chain operations.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
Gasket Manufacturing and Supply (MS27194-32)The contract requires the manufacture and supply of precision metal gaskets identified by Part Number MS27194-32, to be produced in strict compliance with SAE AS27194C and EIA-649-1 configuration control standards, ensuring rigorous adherence to design, material, and process specifications. These gaskets are destined for delivery to the Defense Logistics Agency and are subject to full quality assurance protocols typical of defense supply chain requirements. All work must be executed by a Service-Disabled Veteran-Owned Small Business as this contract is designated under a SDVOSBC set-aside, promoting veteran-owned business participation in federal procurement. The solicitation is classified as a subcontract under NAICS code 332996, which covers Other Fabricated Metal Product Manufacturing, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. The response deadline for bids is set for August 20, 2026, with the solicitation posted on August 5, 2026. Performance location details are unspecified, but all deliverables must meet defense-grade standards and be traceable through authorized configuration control systems. Interested parties must access the official solicitation portal via the provided DIBBS link to submit proposals and obtain technical documentation necessary for compliance.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, PIPE TO TUBE
Solicitation # SPE7M3-26-T-7852
The contract is for the procurement of 169 units of an elbow fitting designed to connect pipe to tube, identified by NSN 4730-00-090-8665 and part number MS51813-3, manufactured in compliance with MIL-DTL-18866K and MS51813G specifications. The item must adhere to strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, with procurement governed by full and open competition. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Delivery is required within 154 days from the contract award, with the product to be shipped FOB origin and subjected to inspection and acceptance at the destination. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 guidelines, with no special marking required and palletization aligned with DLA packaging standards. The unit of issue is each, with a fixed quantity and zero variance allowed, priced at $169.00 per unit for a total contract value of $28,561. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027, and an original delivery deadline of January 5, 2027. Transportation details follow DLA Procurement Notes C19 and C20, and all correspondence must reference the solicitation number SPE7M3-26-T-7852.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
REDUCER, HOSE
Solicitation # SPE7M3-26-T-7847
The contract is for a single reducer hose component with NSN 4730-01-652-2628, solicited under SPE7M3-26-T-7847 by the Department of Defense’s Fluid Handling Division. The item must be delivered within 10 days of award, and responses are due by August 17, 2026. The vendor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization to qualify. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure to foreign persons inside or outside the United States without prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with an approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled technical data, and approved access through the DLA questionnaire are permitted to handle such data. The point of contact for inquiries is William Cain, reachable via email and phone provided in the contract details.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
COUPLING, PIPE
Solicitation # SPE7M3-26-T-7837
The contract is for the procurement of 15 units of 304 stainless steel pipe couplings with a 1-1/2 NPT threaded internal design, classified as a critical application item and identified by NSN 4730001946702. The item must comply with strict material and quality standards, including adherence to the DLA Master List of Technical and Quality Requirements, which supersedes ASTM D3951 packaging standards. Mercury or mercury-containing compounds are prohibited from direct contact with the hardware, except in specified cases such as functional components in batteries, instruments, or sensors as defined by NAVSEA; portable devices containing mercury must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. Packaging and marking must follow MIL-STD-129 for labeling and barcoding, with palletization governed by RP001 DLA Packaging Requirements. The contract specifies FOB Origin delivery, requiring shipment to the USNS HECTOR A CAFFERATA (ESB-8) at 8511 Kerns Street, Dock 5, San Diego, CA 92154, with a delivery window of 20 days after order receipt, and original required delivery date of August 3, 2026. Inspection and acceptance occur at destination, and all shipments must be sent via traceable freight, prohibiting parcel post. The unit price is $15.00 per unit, resulting in a total contract value of $225.00 with no variance allowed in quantity. The contract incorporates numerous FAR and DFARS clauses including those related to small business representation, cybersecurity safeguarding, hazardous material handling, electronic invoicing via WAWF, and restrictions on covered defense telecommunications equipment. Compliance with the Unique Entity ID (UEI) and CAGE code requirements is mandatory for offerors, and submissions must be exclusively made through the DLA Internet Bid Board System (DIBBS) by the August 17, 2026 deadline. The procurement is conducted under simplified acquisition procedures with a fixed-price contract structure and no option quantities, governed by the Fluid Handling Division of the Department of Defense.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, PI
Solicitation # SPE7M3-26-T-7840
The contract involves the procurement of five straight pipe-to-tube adapters made of stainless steel with an outer diameter of 0.375 inches, specified by part number SS600-71-4 from Swagelok, and identified by NSN 4730-01-216-4064. The items must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must follow MIL-STD-129 markings and RP001 DLA packaging standards. The unit of issue is each, with a fixed quantity of five units and no variance allowed, priced at $5.00 per unit for a total of $25.00. Delivery is required within 20 days FOB origin to the designated military destination at Dock 5, 8511 Kerns Street, San Diego, CA 92154, with inspection and acceptance occurring at the delivery point. Shipping must be via traceable freight methods, explicitly prohibiting parcel post. Packaging must be unitized per the contract’s specified Quantity per Unit Pack, and palletization must adhere to DLA guidelines. The contract is issued under solicitation SPE7M3-26-T-7840 with a required delivery date of August 3, 2026, and the point of contact is William Cain from the Fluid Handling Division of the Department of Defense.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
LOCKNUT, TUBE FITTIN
Solicitation # SPE7M3-26-T-7857
This contract specifies the procurement of 782 units of a locknut for tube fittings made from 7075-T73 aluminum alloy with a nominal tube size of 0.375 inch and 0.5625-18UNJF threads, compliant with SAE AS5179D and AS4841 standards. The item is classified as a critical application component and must be manufactured or assembled by an accredited entity listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Products List, accessible via eauditnet.com. All supplies must adhere to strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards, including ASTM D3951. The use of ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval. Packaging must comply with MIL-STD-129 and RP001 DLA packaging requirements, and items are to be palletized accordingly. The unit of issue is each, with no quantity variance permitted. Inspection and acceptance occur at the destination, and delivery is FOB origin with a required delivery timeline of 154 days, targeting January 19, 2027, as the ship date. All markings, labeling, and documentation must meet federal specifications, and shipment must follow DLA transport procedures C19 and C20 to the designated delivery point at Robins Air Force Base, Georgia.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
TEE, PIPE
Solicitation # SPE7M3-26-T-7843
This contract pertains to the procurement of TEE, PIPE with NSN 4730015230941, requiring delivery of four units under solicitation SPE7M3-26-T-7843. The items must be delivered within 20 days to the designated military destination at USNS HECTOR A CAFFERATA (ESB-8) in San Diego, California, with FOB origin terms and no quantity variance permitted. All packaging must comply with ASTM D3951 and MIL-STD-129, adhering strictly to DLA’s Packaging Requirements for Procurement, with precedence given to the DLA Master List of Technical and Quality Requirements over any other standard. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Shipment must be via traceable freight methods—parcel post is prohibited—and all items must be labeled and palletized according to specified guidelines. The unit of issue is each, with a total contract value of $16.00, and acceptance occurs at the destination point. The required delivery date is August 3, 2026, with submission deadlines and sourcing details governed by DLA procedures, and all technical and quality controls referenced through the DLA master list. Contact for inquiries is William Cain of the Fluid Handling Division, Department of Defense.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
CAP, TUBE
Solicitation # SPE7M3-26-T-7850
This contract pertains to the procurement of 10 units of a pressure seal flareless tube fitting with NSN 4730-01-186-4740 and part number MS21914-5W, supplied under solicitation SPE7M3-26-T-7850. The item is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and must be manufactured by a qualified producer listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Products List. The product must comply with SAE AS18280H and AS21914F standards, and the use of Class I ozone-depleting chemicals is strictly prohibited, with any substitute chemicals requiring prior approval. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are categorized with specific verification levels or AQLs. The Certificate of Conformance under FAR 52.246-15 is authorized, subject to Quality Assurance instructions. Delivery is required FOB origin within 20 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must conform to MIL-STD-2073-1E, with marking in accordance with MIL-STD-129 and no special marking codes applied. Palletization follows DLA packaging requirements, and units must be shipped to the designated government location at JB Anchorage, AK. Transportation details are governed by DLAD procedural notes, and the contract is funded under the Department of Defense’s Fluid Handling Division. The solicitation was posted August 5, 2026, with responses due by August 17, 2026, and the original required delivery date is August 3, 2026. The supplier must be an accredited manufacturer or assembler listed on the PRI QML/QPL, and all components must comply with the referenced non-government standards and DLA procurement policies.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, PI
Solicitation # SPE7M3-26-T-7839
This contract specifies the procurement of a straight brass adapter connecting 3/8 inch tube to 3/8 inch pipe, featuring a self-aligning compression sleeve and nut, intended for aircraft applications. The item is identified as a commercial product of a type, manufactured by Parker-Hannifin Corp with part number 68CA-6-6 and NSN 4730-01-218-6656, with a requirement for exactly 20 units delivered within 20 days from the contract award. All items must comply with DLA’s packaging standards under RP001 and technical quality requirements referenced from the DLA Master List, including the mandatory removal of government identification from non-accepted supplies. Packaging must meet MIL-STD-2073-1E, with specific material specifications for wrappers, cushioning, and intermediate containers, and marking must adhere to MIL-STD-129 with no special marking codes applied. The delivery is FOB origin, inspection and acceptance occur at destination, and the quantity variance is strictly zero percent. The items must be shipped via traceable freight to the USNS HECTOR A CAFFERATA (ESB-8) in San Diego, California, with a required delivery date of August 3, 2026, and the contract includes detailed shipment tracking identifiers and government-only administrative codes. The solicitation number is SPE7M3-26-T-7839, issued under NAICS code 332996 by the Department of Defense’s Fluid Handling Division, with William Cain listed as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 334290
New
DIBBS
Domestic Manufacturer of Military Interconnecting Boxes
Other Communications Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334290
New
DIBBS
Supply of Interconnecting Box (NSN: 5975015621270)
Other Communications Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Transportation (First Destination Transportation - FDT)The contract pertains to FOB Origin freight services under the Department of Defense’s Government-Arranged Transportation program, specifically the First Destination Transportation initiative, requiring full compliance with DPAS ratings and integration of VSM systems. Providers must handle all logistics from origin point, including proper packaging, coordination of transportation, and adherence to federal regulations governing defense supply chain operations. Performance is centered at Tracy, California, with the NAICS code 484220 indicating specialized freight transportation services, and the subcontract structure implies participation by secondary vendors under a prime contractor’s oversight. The solicitation is open until August 17, 2026, with an issuance date of August 5, 2026, and falls under the Fluid Handling Division of the Department of Defense. All offerors must ensure seamless execution of transport duties from origin to first destination while maintaining stringent compliance with government-mandated logistics protocols. The contract emphasizes reliability, regulatory alignment, and operational integration within the defense supply network, with no indicated set-aside status, leaving it open to qualified suppliers regardless of small business designation.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331110
New
DIBBS
Domestic Steel Raw Material SupplyThe contract calls for the supply of domestically produced steel bar stock or forged blanks compliant with ASTM A105 specifications, intended for machining into high-pressure pipe elbows. The material must meet stringent quality and performance standards to ensure suitability for high-pressure applications within critical fluid handling systems. All供货 must originate from within the United States to satisfy domestic production requirements, and suppliers are expected to demonstrate capability in consistent production, material traceability, and adherence to ASTM A105 chemical and mechanical property requirements. The solicitation is categorized as a subcontract under NAICS code 331110, which corresponds to iron and steel mill and ferroalloy manufacturing. Responses are due by August 17, 2026, with the opportunity posted on August 5, 2026. Performance of the contract will be centered at Tracy, California, with a zip code of 95304-5000, indicating likely delivery or staging points near this location. The awarding organization is the Fluid Handling Division under the Department of Defense, underscoring the critical nature of the components in military or defense-related infrastructure. While no set-aside type is specified, the emphasis on domestic production aligns with broader federal priorities for sourcing critical materials within the United States.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332812
New
DIBBS
Cadmium Plating and Surface Finishing ServicesThe contract calls for cadmium plating of steel pipe elbows, encompassing all necessary surface preparation steps including pre-treatment, electroplating with cadmium, passivation to enhance durability, and rigorous quality testing to ensure compliance with military corrosion resistance standards. All work must adhere strictly to specifications governing material integrity, coating thickness, adhesion, and performance under environmental stress conditions, ensuring the finished components meet the demanding requirements of defense applications. The production is to be performed at a designated facility in Tracy, California, with a zip code of 95304-5000, and the work is classified as a subcontract under the NAICS code 332812 for metal coating services. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, and is managed by the Fluid Handling Division under the Department of Defense. While no set-aside status or point of contact is specified, the procurement is issued through the Defense Logistics Agency’s DIBBS platform, indicating formal federal procurement procedures and a requirement for bidders to comply with all applicable military and industrial standards. The emphasis on cadmium plating implies a critical application where corrosion resistance is vital to operational reliability, and contractors must demonstrate proven capability in meeting the exacting technical and compliance thresholds for defense-grade surface finishes.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332994
New
DIBBS
Precision Steel Forging and Machining of Pipe ElbowsThe contract calls for the precision manufacture of 90-degree steel street elbow fittings featuring female NPT to male NPT threads, rated for a 3000 PSI working pressure, with all fabrication processes including CNC machining, threading, and comprehensive inspection to meet ASME and military specifications. The fittings must be produced using high-grade steel materials and adhere strictly to dimensional tolerances and surface finish requirements dictated by industry and defense standards to ensure reliability in high-pressure fluid handling applications. Each component is subject to rigorous quality control procedures throughout production, including material certification, dimensional verification, and pressure testing to validate performance under operational conditions. The work is to be performed at a designated location in Tracy, California, with a final delivery deadline aligned to the response deadline of August 17, 2026. This subcontract solicitation, issued by the Department of Defense’s Fluid Handling Division, is classified under NAICS code 332994 for Other Metal Heat Treating and Related Activities, indicating a focus on specialized fabrication and finishing. While no specific set-aside status is assigned, the requirement targets qualified subcontractors with proven experience in military-grade metalworking, advanced machining capabilities, and documented compliance with federal procurement standards for defense-related components.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-300Q
This contract is for a single nonmetallic hose assembly, part number P206TC0639080808-13, manufactured by Parker-Hannifin Corporation, with NSN 4720017315766. The item is classified as a restricted source requiring government engineering approval and prohibits the use of Class I ozone-depleting chemicals, with all substitutes subject to prior approval regardless of specification allowances. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking in accordance with MIL-STD-129 and palletization per RP001. The delivery is FOB origin with a strict 10-day lead time, zero variance in quantity, and inspection and acceptance occurring at the destination. The sole delivery address is the U.S. Army unit at Fort Riley, Kansas, with a required delivery date of August 3, 2026. Transportation directives follow DLA Procurement Notes C19 and C20, and the item is identified under solicitation SPE7M4-26-T-300Q, issued under NAICS code 326220 by the Department of Defense’s Fluid Handling Division. The contract is subject to technical and quality requirements from the DLA Master List, with the controlling revision tied to the solicitation issue date.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M4-26-T-300T
This contract specifies the procurement of a nonmetallic hose assembly with NSN 0001S00000053, totaling 15 units to be delivered within 286 days after order. The solicitation is issued under number SPE7M4-26-T-300T with a response deadline of August 17, 2026, and is designated as a Total Small Business Set-Aside under NAICS code 332912. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. Packaging, identification, configuration management, and export control directives are strictly enforced, including compliance with ITAR or EAR regulations for technical data, which restricts access to foreign persons unless authorized. Only DLA contractors approved under the US/Canada Joint Certification Program, having completed mandatory training and documentation, may handle such controlled data. The item must be marked per physical identification requirements, and non-accepted supplies must be stripped of government identification. Inspection and acceptance are to occur at the origin, and the place of performance is located in New Cumberland, Pennsylvania, with a primary point of contact at Blake Tushar of the Fluid Handling Division under the Department of Defense.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-300U
Offerors must comply with strict requirements for this solicitation, including the prohibition of covered telecommunications equipment or services under FAR 52.204-24 and DFARS 252.204-7016, ensuring no equipment or services from restricted foreign sources are used in performance. Domestic material restrictions under the Berry Amendment and Buy American Act apply, with the Berry Amendment threshold lowered to $150,000, requiring detailed disclosure of any non-domestic materials and strict adherence to DFARS clauses 252.225-7006, 252.225-7012, and 252.225-7015. Small business joint ventures must submit specific representations for eligible categories including small business, service-disabled veteran-owned, WOSB, EDWOSB, and HUBZone. Vendors are strongly encouraged to quote quantity ranges due to fluctuating demand, as this allows buyers to consolidate or adjust requirements without administrative delays, though this does not apply to Auto IDC. Proposals including items produced via additive manufacturing are ineligible for award unless prior written approval is granted. Vendors must register through the new AMPS system within two months to retain access to the Vendor Shipment Module, with those using VSM WebServices required to update their internal schema to avoid disrupted shipping. All offers must be submitted via DIBBS, and if unable to quote by the closing date, a “No Bid” submission with anticipated date or reason is mandatory to avoid misinterpretation of non-responsiveness. Fast Pay is not applicable. The item under solicitation is a hose assembly with NSN 4720-01-625-6296, quantity 16 units, with a 140-day delivery requirement, and the point of contact is Blake Tushar.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE7M3-26-T-7849
The contract is for one unit of a machine thread plug identified by NSN 4730-01-696-9906 under solicitation SPE7M3-26-T-7849, with a response deadline of August 17, 2026 and a delivery requirement of 20 days after contract award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by whether the acquisition is simplified or large, and whether any solicitation amendments have been issued. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item is subject to strict prohibitions against Class I ozone-depleting chemicals, which override any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly authorized. Tailored higher-level contract quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance may occur at the origin. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, including foreign nationals working for U.S. entities, and requires prior authorization from the Department of State or Commerce. Access to the controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed the required DOD training and questionnaire and have received DLA approval. The place of performance is Mechanicsburg, Pennsylvania, 17050-2411, and the point of contact is William Cain of the Fluid Handling Division within the Department of Defense.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details