Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

STRAINER ELEMENT, SEDIM

Active
SPE7M0-26-T-034HFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a sediment strainer element made from aluminum tube with a carbon steel wire mesh component, specified at 11.70 inches in nominal length and 1.530 inches in nominal diameter, featuring a 12x12 mesh with 0.0180 inch wire diameter. The mesh must be zinc plated in accordance with ASTM A386-78, maintaining a minimum plating thickness of 0.0003 inches, replacing the GM4342-M specification. Use of Class I ozone-depleting chemicals is strictly prohibited, and any alternative chemicals require prior approval unless explicitly authorized by the specification. The product must conform to the technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede all other standards unless otherwise directed. The item, identified by NSN 4730-01-214-9392 and part number SPE7M0-26-T-034H, is procured in a quantity of 32 units under purchase request 7017784170 with a delivery deadline of five days from order placement. Delivery is FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling requirements, prioritizing DLA’s packaging standards. Palletization follows RP001 guidelines, and freight must be shipped via the fastest traceable method, excluding parcel post. The delivery address is Anniston Army Depot, with the required delivery date set for August 6, 2026. Sampling and quality verification must meet MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified. Full and open competition applies, and all configuration changes require an Engineering Change Proposal or variance request.

General Info

32 aluminum sediment strainers with steel wire mesh, zinc plated, deliver by Aug 6, 2026, FOB origin, zero variance, strict compliance.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

7 FRANKFORD AVE, ANNISTON, AL, 36201-5021, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M0-26-T-034H DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
STRAINER ELEMENT,SEDIMENT
STRAINER ELEMENT, SEDIMENT. TUBE, ALUMINUM
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ALLOY MATERIAL, WIRE MESH CARBON STEEL MATERIAL<(>,<)>
11.70 INCHES NOMINAL LENGTH, 1.530 INCHES
NOMINAL DIA., 12X12 WIRE MESH, 0.0180 INCH DIA.
EXCEPTION DATA: ZINC PLATE I/A/W ASTM-A386-78
IN LIEU OF GM4342-M. MIN. THICKNESS .0003 IS TO
BE MAINTAINED.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
FULL AND OPEN COMPETITION APPLIES.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev A Gen 1 IAW BASIC DRAWING NR 73342 23018163 REVISION NR DTD PART PIECE NUMBER:
SPE7M0-26-T-034H
SECTION B
PR: 7017784170 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017784170 0001 AY 32.000
NSN/MATERIAL:4730012149392
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
MARKFOR
W31G1Y
SPE7M0-26-T-034H
SECTION B
PR: 7017784170 PRLI: 0001 CONT’D
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
M/F: (TCN) W31G1Y621500XA
RDD: 226
PROJ: TP 1
SUPP ADD: W31G1Y SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2L FC: VE
Need Ship Date:00/00/0000 Original Required Delivery Date:08/06/2026
SPE7M0-26-T-034H NSN/Part Number: 4730-01-214-9392 Quantity: 32 AY Purchase Request: 7017784170QTY: 32 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
PLUG, TUBE REPAIR
Solicitation # SPE7M4-26-T-327H
The contract specifies the procurement of 2,182 units of a laminated phenolic tube repair plug with a nominal size of 3/8 inch, all of which must comply with the salient characteristics and sections 3.4 through 3.7 of specification A-A-59949. Each unit must meet rigorous quality standards, and the supplier is required to provide a Certificate of Quality Compliance for every manufacturing lot, with each certificate prepared in accordance with the Supplemental Quality Assurance Provision. For deliveries subject to government inspection at source, the certificate must be available for review by the government representative upon material presentation, and compliance with COQC requirements enables the government to sign off on the WAWF receiving report provided the documentation is properly uploaded as an attachment to the Production CLIN in iRAPT. An electronic copy of each COQC must be submitted via the Attachment tab of the Receiving Report in the iRAPT system for government record retention. The item is identified by NSN 4730-00-289-0593 under solicitation SPE7M4-26-T-327H, issued by the Fluid Handling Division of the Department of Defense, with a delivery deadline of 165 days after award. The purchase request number is 7017775437, and the place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002. All data required by the contract, including packaging and certification documentation, is to be included in the quoted price. The primary point of contact is Blake Tushar, reachable via email and phone, and the solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The NAICS code for this procurement is 332996, indicating it falls under other miscellaneous fabricated metal product manufacturing.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
LOCKNUT, TUBE FITTING
Solicitation # SPE7M4-26-T-327W
This contract specifies the procurement of a locknut for tube fittings made from corrosion-resistant steel (CRES) with passivation, sized for 0.312-inch nominal tubing, in compliance with SAE Aerospace standards AS4841 and AS5179D. The item is classified as a critical application component and must be sourced exclusively from manufacturers or assemblers listed on the Performance Review Institute’s Qualified Manufacturer List (QML) or Qualified Products List (QPL). All production and assembly must adhere to strict accreditation requirements, and material must not contain mercury or mercury compounds except under specific, limited exemptions for functional devices like sensors, batteries, or instruments. Ozone-depleting chemicals are strictly prohibited. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA’s packaging requirements. The NSN 4730007345774 is procured in two separate line items totaling 1,140 units, with delivery required within 18 days FOB origin. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. Delivery is split between two DLA depots—Tinker AFB and Robins AFB—with specific shipping addresses and required ship dates of September 8, 2026, and May 13, 2027, respectively. The solicitation number is SPE7M4-26-T-327W, and compliance with all referenced technical and quality requirements from the DLA Master List is mandatory.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, PIPE
Solicitation # SPE7M3-26-T-8116
The contract is for 63 units of a 70-30 copper-nickel elbow pipe with a 45-degree flow angle and 2-inch nominal pipe size featuring socket-weld ends, identified by NSN 4730-01-436-0893. The item is procured under solicitation SPE7M3-26-T-8116 with a firm delivery deadline of 144 days after order, and the procurement is managed by the Department of Defense’s Fluid Handling Division. The supplier must comply with DLA packaging requirements, ensuring all documentation and materials meet specified standards. Each shipment must be accompanied by a Certificate of Quality Compliance (COQC), with one copy provided per manufacturing lot if multiple lots are involved, and each certificate must adhere to the Supplemental Quality Assurance Provision. The supplier is required to make the COQC available to Government inspectors at the source for review during material acceptance and must upload electronic copies of all certificates to the iRAPT system via the Receiving Report’s Attachment tab for official records. Government representatives may finalize acceptance via WAWF only after verifying proper COQC compliance and proper documentation upload. The contract was posted with a response deadline of August 20, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with Judy Mojica listed as the primary point of contact for inquiries and coordination.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
COUPLING, CLAMP, PIPE
Solicitation # SPE7M3-26-T-8134
The contract is for the procurement of 824 units of a 3-inch flexible coupling with a galvanized finish and Nitrile Grade T gasket, identified by part number L030075GT0 and NSN 4730-01-514-5018, manufactured by Victaulic Company of America Inc. All supplies must comply with DLA Packaging Requirements and be packaged in accordance with MIL-STD-2073-1E, using specific preservative methods and marking standards aligned with MIL-STD-129, with no special marking required. The unit of issue is each, with a fixed quantity and zero variance allowed, and delivery is required FOB origin within 67 days from the contract award. Inspection and acceptance occur at the destination, which is DLA Distribution Red River, Building 499 in Texarkana, Texas. The contract is a total small business set-aside under NAICS code 332996, issued by the Department of Defense’s Fluid Handling Division, and is subject to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The solicitation was issued on August 9, 2026, with responses due by August 20, 2026, and the original delivery date is February 1, 2027. Contact for inquiries is William Cain, with the provided email and phone number.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, TUBE FITTING, T
Solicitation # SPE7M3-26-T-8127
The contract specifies the procurement of 378 packaging groups of threaded tube fitting plugs, with each packaging group containing two units, for a total of 756 individual fittings. The item is identified by NSN 4730-00-571-9648 and is subject to stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Packaging must strictly adhere to DLA requirements, ensuring units are delivered in pairs per packaging group. The contract imposes export control obligations under ITAR or EAR, prohibiting unauthorized disclosure or transfer of technical data to foreign persons, including foreign nationals in the U.S., and requires contractors to hold JCP certification, complete designated DOD export control training, and obtain DLA authorization to access controlled data. Cybersecurity compliance requires CMMC Level 2 certification by an accredited third-party assessor. Configuration changes necessitate formal engineering change proposals, and removed government identification from non-accepted supplies must be handled per RQ011. The solicitation, issued under SPE7M3-26-T-8127, has a response deadline of August 20, 2026, and delivery is due within 572 days after award. Performance is centered at Tinker Air Force Base with a primary point of contact at the Defense Logistics Agency.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, PIPE
Solicitation # SPE7M3-26-T-8142
This contract is for the procurement of a straight pipe-to-hose adapter under solicitation SPE7M3-26-T-8142, with a total quantity of 598 units identified by NSN 4730-01-154-6425. The item must comply with technical specification MIL-DTL-24356B Revision B dated March 20, 2023, and the associated Quality Assurance Plan SQAP011546425 Revision A dated September 19, 2019. The contract is a total small business set-aside, with full and open competition permitted. All products must adhere to strict prohibitions against Class I ozone-depleting chemicals and the intentional use of mercury or mercury-containing compounds, except for approved exceptions such as functional mercury in batteries, fluorescent lights, sensors, controls, weapon systems, or specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. The item is designated as a critical application, requiring compliance with detailed packaging standards including MIL-STD-2073-1E and marking per MIL-STD-129 with no special marking required. Palletization must follow DLA packaging requirements, and delivery is FOB origin with a 503-day delivery timeline. Inspection and acceptance occur at the origin, and the quantity variance is strictly zero percent. A first article test is required for one unit, priced at $1.00, with no separate charge assumed unless specified, and the test quantity is governed by FAR 52.209-3. The delivery point is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with a required ship date of July 23, 2026, and an original delivery deadline of April 14, 2028. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to solicitation and award dates. The contract includes provisions for configuration change management, variance requests, and removal of government identification from non-accepted supplies.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
TEE, TUBE TO BOSS
Solicitation # SPE7M3-26-T-8146
The contract is for the procurement of four aluminum alloy tee, tube to boss fittings with NSN 4730-01-348-6111, to be manufactured and delivered in strict compliance with aerospace standards SAE AS1003K and SAE AS18280H, and qualified under the DLA Master List of Technical and Quality Requirements. Only manufacturers listed on the PRI Qualified Manufacturers List or Qualified Products List are eligible, and all items must meet Class 3 thread specifications. The use of Class I ozone depleting chemicals is expressly prohibited, and any substitutions require prior approval. Packaging must conform to ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s RP001 packaging requirements, and all items must be marked and labeled as specified. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The required delivery date is 165 days from contract award, with an original deadline of February 5, 2027. All items must be shipped to the DLA Distribution facility in New Cumberland, PA, and transportation details must adhere to DLAD Proc Note C19 and C20. The contract is part of a federal solicitation issued by the Department of Defense’s Fluid Handling Division, with William Cain as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, TUBE
Solicitation # SPE7M4-26-T-327N
This contract pertains to the procurement of an elbow tube item with NSN 4730010596368, specified under solicitation SPE7M4-26-T-327N, issued as a total small business set-aside. Two line items are included: 36 units priced at $7017779455-0001 and 75 units at $7017779455-0002, both with a unit price of $1.00 totaling $36 and $75 respectively, to be delivered FOB origin with no quantity variance permitted. The delivery window is 335 days, with required delivery dates of January 14, 2028, and shipment must be completed by August 6, 2026, for the first line and March 2, 2028, for the second. Acceptance and inspection occur at the destination, and mandatory packaging standards include ASTM D3951 and MIL-STD-129 labeling, with palletization governed by DLA’s RP001 requirements. All technical and quality specifications referenced via R or I numbers are controlled by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. The item is designated a critical application component and must be delivered to two distinct DLA distribution depots—Hill AFB, Utah, and Warner Robbins, Georgia—each with specific shipping addresses and point of contact details. The contract mandates strict adherence to DoD unit of issue protocols, referenced via a provided Excel link, and falls under NAICS code 332996 for other fabricated metal product manufacturing.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M3-26-T-8121
The item is a quick-disconnect coupling half with a valved nipple, identified by NSN 4730-01-316-0125, with a quantity of 262 units required under purchase request 7017778762. Delivery is scheduled for 165 days after award, and the solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, under contract number SPE7M3-26-T-8121. The procurement is managed by the Department of Defense’s Fluid Handling Division, with performance located in New Cumberland, Pennsylvania, and William Cain listed as the primary point of contact. Technical data associated with this item is subject to export controls under either ITAR or EAR, meaning any disclosure to foreign persons, including those within the U.S., requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs this data, and only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and approved access through the DLA questionnaire are permitted to receive such information. The NAICS code for this acquisition is 332996, and the contracting office operates under federal procurement guidelines.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
TEE, TUBE TO BOSS
Solicitation # SPE7M3-26-T-8140
This contract specifies the procurement of a TEE, TUBE TO BOSS component with NSN 4730-00-834-8781, requiring seven units to be delivered within 82 days under contract SPE7M3-26-T-8140. The item must be manufactured using a forging process and sourced exclusively from manufacturers accredited and listed on the Performance Review Institute’s Qualified Manufacturers List or Qualified Products List for standard SPE7M3-26-T-8140, ensuring compliance with SAE AS1002K and SAE AS18280H technical specifications. Class 3 threads apply, and the component is classified as a critical application item with strict prohibitions against ozone-depleting chemicals, requiring prior approval for any substitute materials. Quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required in sampling unless otherwise specified, and all attributes are assigned verification levels or AQLs as defined. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA packaging requirements, and all units must be labeled and marked accordingly. Delivery is FOB origin to Robins Air Force Base, Georgia, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The contract mandates adherence to the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards, and all documentation must reflect current revisions effective on the solicitation or award date.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PIPE, METALLIC
Solicitation # SPE7M2-26-T-6162
This contract specifies the procurement of 101 linear feet of seamless stainless steel pipe, grade TP304, schedule 80, with nominal 1-inch diameter and random lengths between 12 and 24 feet. The item is classified as a commercial item and a critical application component, subject to full and open competition. Technical and quality standards are governed by ASTM A312/A312M Revision B dated May 1, 2025, and all requirements are aligned with the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001. The pipe must be free of intentional mercury or mercury-containing compounds, with exceptions only for approved functional uses such as batteries, instrumentation, or weapons systems, and any portable mercury-containing devices must include shockproof design and secondary containment per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E, including specific preservation, wrapping, and cushioning methods, while marking adheres strictly to MIL-STD-129N with barcoding per AIM BC1. Palletization limits gross weight to 2,000 pounds per lift, and all shipments require compliance with DLA packaging and transportation procedures. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and a quantity tolerance of plus or minus 10 percent applies. The item is identified by NSN 4710-01-155-0196 and purchase request number 7017685265, with a unit price of $101.00 per foot for a total contract value of $10,201. Required delivery is within 158 days of contract award, with an original delivery date of March 27, 2027, and a needed ship date of January 26, 2027. The delivery destination is DLA Distribution San Joaquin, receipt warehouse 57, located at 25600 S Chrisman Rd, Tracy, CA 95304-5000, United States. All shipments must follow DLAD proc notes C19 and C20 for transportation and first destination handling. The solicitation number is SPE7M2-26-T-6162, issued under the NAICS code 332996 by
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
CONNECTOR, MULTIPLE, FLU
Solicitation # SPE7M0-26-T-035F
The contract specifies the procurement of a single connector, multiple, fluid pressure line with NSN 4730-01-393-2162 and part number 15471-9569-0, quantity one unit, to be delivered within five days under FOB origin terms with no variance allowed in quantity. All packaging and labeling must comply strictly with MIL-STD-129 and the DLA Master List of Technical and Quality Requirements, which override ASTM D3951. The item must be palletized per DLA Packaging Requirements for Procurement and shipped via traceable means, excluding parcel post, to the designated military facility at Fort Polk, Louisiana. The delivery is tied to a required date of August 6, 2026, and the contract references specific military identifiers including W91NE4, W6KF ECS 17 FT, and TCN W91NE462180024 for tracking and accountability. The procurement falls under a Department of Defense solicitation with a response deadline of August 20, 2026, and is categorized under NAICS code 332996 for other miscellaneous fabricated metal product manufacturing. Government use codes and distribution data are embedded for internal logistics and reporting.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 334419
New
DIBBS
HOUSING, ELECTRONIC COM
Solicitation # SPE7M0-26-T-034M
This contract, issued under solicitation number SPE7M0-26-T-034M by the Department of Defense through the Maritime Supply Chain ESOC Buys office, requires the delivery of 10 units of electronic component housings identified by NSN 5999-01-619-4168 and part number BNG-410-01 from L3 Technologies, Inc. Delivery must be completed within 10 days of award, shipped FOB origin, and received at Fort Bragg, North Carolina, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation, wrapping, and marking requirements with no special marking codes applied. The packaging and shipment must also comply with DLA’s overarching packaging requirements and hazardous materials protocols when applicable, and parcel post is explicitly prohibited — all shipments must use fast, traceable methods. The contractor must ensure compliance with all technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and may not use any Class I ozone-depleting substances in manufacturing or processing unless formal written approval is obtained from the Contracting Officer — this restriction does not extend to commercial items or part-numbered-only items. Any substitution of the approved part number, whether through administrative change or superseding item, requires official documentation from the original manufacturer and prior approval from the Product Specialist or Authorizing Engineering Support Activity to be considered for award; otherwise, the offer will be deferred to future solicitations. Delivery is tied to an original required date of August 5, 2026, with government-specific identifiers and tracking information including RDD E, project TP 2, and the contract data interface code A0A, all governed by the DLA electronic procurement system and applicable FAR and military standards.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335929
New
DIBBS
CABLE, SPECIAL PURPO
Solicitation # SPE7M0-26-T-035E
The contract pertains to a single unit of a special purpose cable identified by NSN 6145-01-588-1757, with a required delivery within five days of award. The solicitation, numbered SPE7M0-26-T-035E, was posted on August 9, 2026, and responses are due by August 20, 2026. It is governed by the DLA Master List of Technical and Quality Requirements, which outlines all referenced technical and quality standards marked with R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements unless an amendment overrides it. Any configuration changes require an Engineering Change Proposal or a formal request for variance, and non-accepted supplies must have government identification removed per established protocols. The alternate offeror must submit a complete data package including full specifications for both the primary and alternate parts. The purchasing organization is the Department of Defense via the Maritime Supply Chain ESOc Buys, with Abaigael Masterson as the primary point of contact. The North American Industry Classification System code is 335929, and the contract is designated as a federal procurement with no set-aside classification.
Other Communication and Energy Wire Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335929
New
DIBBS
CABLE ASSY RADIO, AI
Solicitation # SPE7M0-26-T-034Z
The contract pertains to the procurement of two cable assemblies for radio systems designated as CABLE ASSY RADIO, AI with NSN/Part Number 6145-01-573-7296, under solicitation SPE7M0-26-T-034Z. Delivery is required within 250 days after award, and the solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026. The acquisition falls under NAICS code 335929 and is managed by the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance scheduled for Tracy, California. Compliance with DLA packaging requirements is mandatory, and the supplier must adhere to Covered Defense Information protocols. The offeror is required to meet Cybersecurity Maturity Model Certification Level 2 self-assessment standards, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The alternate offeror must submit a complete data package covering both the approved and alternate parts, and all government identification must be removed from non-accepted supplies. The primary point of contact is Jessica Ramsey, reachable via email and phone provided.
Other Communication and Energy Wire Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
SIGHT, REFLEX
Solicitation # SPE7M0-26-T-034K
The contract pertains to the procurement of one unit of a sight reflex item identified by NSN 1240-64-001-0199 and part number 405044023, supplied by SAAB DYNAMICS AKTIEBOLAG A175N. The requirement is governed by DLA packaging standards under RP001 and incorporates technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Delivery is required within five days of award, shipped FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containment as detailed in the packaging data. Marking must adhere to MIL-STD-129 with the special fragile designation, and palletization must meet DLA packaging guidelines. The item is to be delivered to Fort Wainwright, Alaska, with shipment governed by DLAD procedures C19 and C20, and freight and marking instructions are directed to the specified government supply point. The contract number is SPE7M0-26-T-034K, with a required delivery date of August 6, 2026, and the solicitation response deadline is August 20, 2026. The acquiring agency is the Department of Defense through the Maritime Supply Chain ESOC Buys, with Gerard Quinn as the primary point of contact.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
RETAINER, DISK, VALVE
Solicitation # SPE7M0-26-T-034B
The contract pertains to the procurement of one unit of a RETAINER, DISK, VALVE identified by NSN 4810-01-398-8156 and part number A07057.001.156 from Emerson Automation Solutions, classified as a critical application item. Delivery is required within five days FOB origin, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must meet DLA’s packaging standards. The item must be physically identified in accordance with MIL-STD-130, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware except for approved functional uses like batteries, lamps, sensors, or weapon systems, with portable mercury-containing devices requiring shockproof construction and secondary containment as specified by NAVSEA 5100-003D. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. The sole delivery address is DLA Distribution San Diego, and shipment must be made by the fastest traceable means, explicitly prohibiting parcel post. The required delivery date is August 6, 2026, and the contract is issued under solicitation SPE7M0-26-T-034B, with a unit price of $1.00 and no variance allowed in quantity.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M0-26-T-034L
This contract is for a single unit of a non-metric hose assembly identified by NSN 4720-01-656-3692 and part number F387TCJSJ9060606-225 from Parker-Hannifin Corporation, under solicitation SPE7M0-26-T-034L. The item must be delivered within five days to Hurlbert Field, Florida, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 unless superseded by DLA’s Master List of Technical and Quality Requirements, which takes precedence. All packaging must be marked and labeled per MIL-STD-129 and palletized according to DLA’s packaging guidelines. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Shipping must be done via the fastest traceable means; parcel post is forbidden. The purchase request number is 7017784019, with a required delivery date of August 6, 2026, and the contract is governed by DoD unit of issue standards. Government use identifiers and shipping controls are included for internal tracking, with primary point of contact being Abaigael Masterson at DLA.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, CER
Solicitation # SPE7M0-26-T-034P
This contract specifies the procurement of a fixed ceramic capacitor identified by NSN 5910-01-182-2217, with a quantity of one unit, under purchase request 7017784015. The item is classified as a commercial item, including commercial of a type, and must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revision controls based on the solicitation or award date as determined by acquisition type. Physical identification and marking of the item are required, and government identification must be removed from any non-accepted supplies. Delivery is mandated within five days of award, with performance taking place at Robins AFB, GA, 31098-1626. The solicitation, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office, has a response deadline of August 20, 2026, and is solicited under SPE7M0-26-T-034P, with primary point of contact Audrey Acuna available via email and phone for inquiries.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
ADAPTER, MECHANICAL
Solicitation # SPE7M0-26-T-035C
The contract is for one mechanical adapter with NSN 4940-01-381-1029 and part number VV86125103, issued under solicitation SPE7M0-26-T-035C by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at origin, and the item must be packaged per ASTM D3951 unless superseded by stricter DLA Master List of Technical and Quality Requirements, with all packaging labeled according to MIL-STD-129 and palletized per DLA packaging guidelines. The unit of issue is each, with a single unit ordered at a unit price of one dollar, totaling one dollar. The supplier is Falcon Supply located in Hoogerheide, Netherlands, with delivery instructions referencing DLAD Proc Notes C19 and C20 for transportation routing. The original required delivery date is August 12, 2026, and the contract includes specific government use codes and a point of contact at DLA for inquiries. All technical and quality standards referenced are governed by the DLA Master List, with version control tied to the solicitation issue date.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
RETAINER, COUPLING
Solicitation # SPE7M0-26-T-035G
The contract is for the procurement of 37 units of RETAINER, COUPLING with NSN 4730-01-660-0115 and part number 2010052-1 from L3HARRIS TECHNOLOGIES, INC., under solicitation SPE7M0-26-T-035G, a total small business set-aside. Delivery is required within 165 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. Zero variance is permitted in quantity, and all items must be packaged in accordance with ASTM D3951 and labeled per MIL-STD-129, with palletization following DLA’s packaging requirements, which override any conflicting standards. DLA’s Master List of Technical and Quality Requirements govern all specifications, including sampling procedures mandated by MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval. The unit of issue is each, with a total price calculated at $37.00 per unit. All items must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, by the original required delivery date of October 26, 2027, with a need ship date of February 2, 2027. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and points of contact are designated for procurement inquiries.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILM
Solicitation # SPE7M0-26-T-034E
This contract specifies the procurement of a fixed film resistor identified by part number TNPW12062409BT-9 and NSN 5905014746356, with a quantity of one unit delivered FOB origin within five days. The item must comply with DLA packaging requirements under MIL-STD-2073-1E and marking standards per MIL-STD-129, including specific lead finish labeling in accordance with IPC/JEDEC J-STD-609, which requires accurate identification of Pb-free and other component attributes on each unit package. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The contractor must deliver to Fort Carson, Colorado, using traceable freight methods and avoid parcel post, with the shipment directed to the Central Receiving Point under the code W80BTZ. The contract includes strict zero variance in quantity, destination inspection and acceptance, and special marking requirements for compliance with federal standards. All data, including the point of contact, delivery date, and solicitation number, is tied to the DoD procurement system and is subject to government use and oversight.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334514
New
DIBBS
DISK, LIGHT INTERRUPTIN
Solicitation # SPE7M0-26-T-034Y
The contract pertains to the procurement of a LIGHT INTERRUPTING DISK with NSN 6625-01-723-2418 and part number OFB-2073-A2, with a total quantity of 31 units at a unit price of $31.00, resulting in a total contract value of $961.00. Delivery is required FOB origin within 217 days from the award date, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-129 labeling, and specifies that hazardous materials must comply with TQ requirement IP025 per FED-STD-313, while non-hazardous items must be commercially packaged per ASTM D3951—unless superseded by any DLA Master List of Technical and Quality Requirements, which take precedence. Packaging and palletization must align with RP001 standards, and the unit of issue is EA. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, with the same address used for both freight shipping and parcel post. The required ship date is March 26, 2027, and the original delivery due date matches this deadline. The solicitation number is SPE7M0-26-T-034Y, issued by the Department of Defense’s Maritime Supply Chain ESOC, with technical and quality specifications governed by the DLA Master List as of the solicitation issue date. Point of contact for inquiries is Shannon Irwin via email or phone provided.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details