Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

STRAINER, SEDIMENT

Open
SPE7M3-27-T-1102Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7M3-27-T-1102 is a small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of six sediment strainers, identified by NSN 4730-01-737-7797. The items are designated as critical application items, specifically referencing Core Industries Inc. DBA Mueller part number M6732321. Delivery is required within 168 days after the order, with a need ship date of May 4, 2027, and a required delivery date of May 10, 2027. The contract is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, as well as specific environmental and safety restrictions. This includes a prohibition on the intentional addition of mercury or mercury-containing compounds and the exclusion of Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS cybersecurity and Buy American regulations.

General Info

DLA small business solicitation for six sediment strainers delivered by May 2027.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

326122 - Plastics Pipe and Pipe Fitting Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this first17 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION
Office AddressUSA
Contacts
William Cain
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STRAINER,SEDIMENT
STRAINER,SEDIMENT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
CRITICAL APPLICATION ITEM
CORE INDUSTRIES INC. DBA MUELLER 76588 P/N M6732321
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019031481 0001 EA 6.000
NSN/MATERIAL:4730017377797
SPE7M3-27-T-1102
SECTION B
PR: 7019031481 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:JA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/04/2027 Original Required Delivery Date:05/10/2027
SPE7M3-27-T-1102 NSN/Part Number: 4730-01-737-7797 Quantity: 6 EA Purchase Request: 7019031481QTY: 6 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326122
New
DIBBS
Air Breathing Hose SupplyThis subcontract involves the supply of 15 specialized air breathing hoses for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required equipment must match NSN 4720-01-688-4434 and Chase Supply, Inc. part number C5-19-916-4-2, while strictly adhering to TYPE I (CODE W) shelf-life requirements of 120 months. The contractor is responsible for meeting all technical specifications associated with the identified NSN and ensuring full compliance with FAR 52.222-50. Performance for this contract will take place in New Cumberland, Pennsylvania, under NAICS code 326122.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326122
New
DIBBS
Manufacturing of 38-Degree Rubber Elbows
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326122
New
DIBBS
Supply of PVC Socket Slip Pipe Caps (NSN 4730-01-353-3902)This subcontract involves the procurement of 1,825 PVC socket slip pipe caps to support prime contractors for the DLA Weapons Support Fluid Handling Division. The required items must be 4 inch IPS caps that adhere to NSN 4730-01-353-3902 and Harrington part 447-040 specifications. All units are to be delivered to DLA Distribution Puget Sound in Bremerton. The contractor is responsible for ensuring strict adherence to technical standards, including palletization per RP001, labeling per MIL-STD-129, and packaging per ASTM D3951. Additionally, the provider must maintain compliance with the Buy American Act and meet NIST SP 800-171 cybersecurity standards to fulfill the contract requirements.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326122
New
DIBBS
COUPLING, PIPE
Solicitation # SPE7M3-27-T-1104
This procurement, solicitation number SPE7M3-27-T-1104, is issued by the DLA Weapons Support Fluid Handling Division for the supply of 192 zinc-plated carbon steel pipe couplings used as test points. Each assembly must include an internal piston, Buna O-ring, chain, and cap. The items are designated as critical application items with a non-extendable shelf life of 180 months. Delivery is required by June 18, 2027, with a need ship date of May 4, 2027, and is handled under FOB Origin terms via the First Destination Transportation program to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including special marking code 32 for shelf-life items. Inspection and acceptance will occur at the destination. Administratively, the contractor must use the Wide Area Workflow system for invoicing and payment. The solicitation incorporates various DFARS and FAR clauses, including requirements for safeguarding covered defense information, prohibitions on hexavalent chromium, and compliance with the Buy American Act and Berry Amendment. All quotations must be submitted via the DLA Internet Bid Board System by November 16, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326122
New
DIBBS
SPOOL PIECE, OUTLET
Solicitation # SPE7M3-27-T-0714
Solicitation SPE7M3-27-T-0714 is a request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of eight outlet spool pieces, identified by NSN 4730-01-599-3939. This is not a small business set-aside. The required delivery date is December 18, 2027, with a delivery period of 385 days after order. Shipping is FOB Origin, with the final destination for inspection and acceptance being DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, specifically citing RA001, RP001, and RQ011. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. Material restrictions prohibit the intentional addition of mercury or the use of Class I ozone-depleting chemicals. Offerors must submit quotes via the DIBBS portal and comply with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Payment and receiving reports are to be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 4 days
View Details
NAICS: 326122
New
DIBBS
STRAINER, SEDIMENT
Solicitation # SPE7M3-27-T-1093
Solicitation SPE7M3-27-T-1093 is a small business set-aside procurement issued by the Defense Logistics Agency Weapons Support Fluid Handling Division for three sediment strainers, identified by NSN 4730-01-652-5899. The contract requires delivery within 168 days after order, with a required delivery date of April 8, 2027, and a need ship date of May 4, 2027. Shipping is established as FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will be conducted at the destination. The procurement is subject to strict technical and environmental standards, including a total prohibition on Class I ozone-depleting chemicals and restrictions on the intentional use of mercury or mercury-containing compounds. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment requests. The contract incorporates various FAR and DFARS clauses, including mandates for the Buy American program, cybersecurity safeguarding of covered defense information, and prohibitions on covered defense telecommunications equipment.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326122
New
DIBBS
RESTRICTOR, FLUID FLOW
Solicitation # SPE7M3-27-T-1052
The Defense Logistics Agency Weapons Support Fluid Handling Division is soliciting the procurement of 431 units of Fluid Flow Restrictors, identified by NSN 4730-01-268-6248. The required items must be CRES material, Holo-Krome part number 52080, and altered according to the Navy altered item drawing titled Orifice, Valve. This is a small business set-aside procurement with a required delivery date of May 21, 2027, and a delivery period of 168 days after award. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-B-117 for bag fabrication. Due to the nature of the technical data, the contract is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the award requires compliance with Cybersecurity Maturity Model Certification Level 2 and the safeguarding of covered defense information. Inspection will be conducted at the destination per FAR 52.246-2, and all payment processing must be handled through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326122
New
DIBBS
COUPLING HALF, QUICK DI
Solicitation # SPE7M3-27-T-1083
Solicitation SPE7M3-27-T-1083 is a federal procurement issued by the DLA Weapons Support Fluid Handling Division for the supply of 23 units of Coupling Half, Quick Disconnect, identified by NSN 4730-01-548-3122. The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a delivery timeline of 181 days after order. Inspection and acceptance are designated at the destination, and the contractor must utilize the Wide Area WorkFlow system for all invoicing and receiving reports. The procurement is subject to stringent technical and quality requirements, including compliance with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Due to the nature of the technical data, the contract is subject to export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA training. Additionally, the contract mandates adherence to CMMC Level 2 certification and DFARS safeguarding requirements for covered defense information. Offerors must comply with the Buy American Act and Berry Amendment, and are explicitly prohibited from using additive manufacturing processes unless specifically authorized.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326122
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M3-27-T-1151
Solicitation SPE7M3-27-T-1151 is a small business set-aside for the procurement of hose clamps, specifically part number SAE-J1508 Type TB Size 36 (NSN 4730-01-571-6937), issued by the DLA Weapons Support Fluid Handling Division. The contract consists of three line items totaling 253 units, with delivery required within 67 days after order. Deliveries are FOB Origin and are distributed across three locations: DLA Distribution New Cumberland, PA; DLA Distribution Barstow, CA; and DLA Distribution Albany, GA. The items are designated as critical application items and must be marked with the size number stamped on the band in accordance with SAE-J1508. Technical compliance requires adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must be labeled per MIL-STD-129 and palletized according to RP001. The contract prohibits the use of Class I ozone-depleting chemicals and mandates compliance with the Buy American Act and Berry Amendment. Inspection and acceptance are conducted at the origin, with Certificate of Conformance procedures authorized under FAR 52.246-15. Administrative processing and invoicing must be managed through the Wide Area Workflow (WAWF) system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326122
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M3-27-T-1148
Solicitation SPE7M3-27-T-1148, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of 756 hose clamps (NSN 4730-01-601-8071) with an open size of 3-1/2 inches and a closed size of 3-3/16 inches. The items must be manufactured in accordance with Basic CID A-A-52506E Revision E and part number AA52506-SLTB-74. Delivery is required within 318 days, with the shipment being handled under the First Destination Transportation program and submitted as FOB Origin. Inspection and acceptance will occur at the destination, with sampling conducted per MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 requirements. The contract mandates the exclusion of Class I ozone-depleting chemicals and requires adherence to the Buy American and Balance of Payments Program. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with NIST SP 800-171 cybersecurity assessment requirements. All quotes must be submitted via DIBBS, and the primary point of contact for the procurement is William Cain.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326122
New
DIBBS
SLEEVE, COMPRESSION, TUB
Solicitation # SPE7M3-27-T-1095
This fixed-price contract, solicitation SPE7M3-27-T-1095, is for the procurement of 90 units of compression sleeves for tube-hose fittings (NSN 4730-01-655-7184), identified as a critical application item. The contract is a Small Business Set-Aside managed by the DLA Weapons Support Fluid Handling Division. Delivery is required within 168 days after order, with a need ship date of May 4, 2027, and a final delivery date of June 4, 2027. Shipping is FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. The contractor must adhere to strict quality and certification standards, including mandatory FAA certification provided with each shipment and maintained on file for 5 to 10 years. Technical requirements include Item Unique Identification (IUID) per MIL-STD-130 and supply chain traceability documentation per DLA Directive Procurement Note C03. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Inspection and acceptance will occur at the destination per FAR 52.246-2, and the manufacturer's inspection system must meet ISO 9001:2015 or an equivalent standard. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-27-T-2770
The Defense Logistics Agency Weapons Support Fluid Handling Division is soliciting the procurement of 29 metal tube assemblies under NSN 4710-01-438-5026. This small business set-aside solicitation, identified as SPE7M4-27-T-2770, requires delivery to DLA Distribution Warner Robins with a delivery timeline of 483 days after order. The contract is established as FOB Origin, with both inspection and acceptance occurring at the origin. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. The contractor must adhere to strict quality and security standards, including CMMC Level 2 certification via a Certified Third-Party Assessment Organization and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR or EAR export controls, requiring approved US/Canada Joint Certification Program certification for access. Quality assurance is governed by SAE AS9003 or ISO 9001, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows DLA requirement RP001.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

NAICS: 339999
New
DIBBS
Supply of Nonmetallic Hose Assemblies (NSN 4720012242968)This subcontract involves the supply of 103 nonmetallic hose assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing assemblies that meet the technical specifications for Danfoss P/N 1C12408HHH028AAA, Parker-Hannifin P/N 24221-8S-0280, or Safran P/N CCH12019. All deliverables must be packaged according to RP001 and marked in compliance with MIL-STD-129. The project falls under NAICS code 339999 and is centered in Barstow, California. Interested parties must respond by November 16, 2026, to provide the required compliant hose assemblies under NSN 4720012242968.
All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332312
New
DIBBS
Loop Clamp SupplyThis subcontract involves the supply of 6,732 critical application loop clamps for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The items must be manufactured or sourced in strict accordance with part standard SAE AS21919E Revision E and Part Piece Number AS21919WDG06. Performance will take place at Tinker AFB, with all deliverables adhering to MIL-STD-2073-1E packaging standards and the DLA Master List of Technical and Quality Requirements. The contract specifically manages TYPE I CODE Y items, which carry a non-extendable shelf life of 180 months. Interested parties must respond by November 16, 2026, regarding this requirement under NAICS code 332312 for the Department of Defense.
Fabricated Structural Metal Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488510
New
DIBBS
First Destination Transportation (FDT) Freight ServicesThe First Destination Transportation Freight Services subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the transportation of fluid handling hardware for prime contractors. The selected provider is responsible for coordinating pickups from suppliers on an FOB Origin basis and managing the entire transit process to the final government destination. Key operational requirements include the mandatory use of U.S.-flag vessels for all ocean transport and the provision of comprehensive freight documentation, specifically detailing the gross weight and port of loading. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 488510.
Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332710
New
DIBBS
Supply of Straight Tube-to-Boss AdaptersThis subcontract involves the supply of 432 straight tube-to-boss adapters, identified by NSN 4730013542660, for prime contractors supporting the DLA Weapons Support Fluid Handling Division of the Department of Defense. The contractor is responsible for manufacturing or sourcing the adapters to meet strict technical specifications, ensuring all items are packaged according to MIL-STD-2073-1E and shipments are marked in compliance with MIL-STD-129. The project falls under NAICS code 332710 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026, following the posting date of November 6, 2026.
Machine Shops

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332710
New
DIBBS
Manufacture of Straight Pipe-to-Hose Adapter (NSN 4730-01-330-3596)This subcontract involves the manufacture of one straight pipe-to-hose adapter, part number 1243-2294-2, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The component must be fabricated from copper alloy materials and strictly adhere to NAVSEA 5100-003D mercury-free requirements. The selected provider is required to supply comprehensive material traceability documentation and certify that the delivered part is in a new and unused condition. This procurement falls under NAICS code 332710 and is managed by the Department of Defense.
Machine Shops

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332996
New
DIBBS
Pipe Nipple Supply (NSN 4730001962037)This subcontract involves the supply of 16 pipe nipples for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing the components in strict accordance with the dimensions and material standards specified by NSN 4730001962037. All deliverables must adhere to DLA quality standards and comply with the Nonmanufacturer Rule under FAR 52.219-33. Logistics for the contract are managed through the First Destination Transportation program, with the place of performance located in New Cumberland. The opportunity was posted on November 6, 2026, with a response deadline of November 16, 2026, falling under NAICS code 332996.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332312
New
DIBBS
Copper Alloy Pipe Tee Supplier
Fabricated Structural Metal Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339113
New
DIBBS
Manufacture and Supply of Nonmetallic Hose AssembliesThis subcontract involves the manufacture and supply of 30 nonmetallic hose assemblies, specifically NSN 4720-01-339-8531, for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating the units in accordance with the DLA Master List of Technical and Quality Requirements and ensuring all items are packaged according to ASTM D3951 and MIL-STD-129 standards. The agreement requires strict adherence to the Buy American Act and the Hazard Communication Standard 29 CFR 1910.1200. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 339113. The response deadline for this opportunity is November 16, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332312
New
DIBBS
Metal Tube Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of 106 specialized metal tube assemblies for the Department of Defense, specifically under the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing assemblies to precise technical specifications and part numbers 1MB902, 9081001, and 9081001P. Due to the nature of the components, the contractor must implement rigorous quality control for items designated as Critical Application Items and ensure all procurement packaging requirements are met. The project is categorized under NAICS code 332312 and will be performed in New Cumberland. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026. The final products are intended for prime contractors who are delivering on larger DLA supply contracts.
Fabricated Structural Metal Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Supply of Eaton Aeroquip Tube CouplingsThis subcontract involves the procurement or manufacture of two high-precision tube couplings for prime contractors delivering to the DLA Weapons Support Fluid Handling Division. The items must strictly adhere to Eaton Aeroquip LLC part number R82101T05 and the DLA Master List of Technical and Quality Requirements. All deliverables must be packaged according to ASTM D3951 and MIL-STD-129 standards and delivered FOB Origin. The contract requires full compliance with the Buy American and Balance of Payments Program. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332999. Interested parties must respond by November 16, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339999
New
DIBBS
MIL-SPEC Packaging and KittingThis subcontract for MIL-SPEC Packaging and Kitting supports the DLA Weapons Support Fluid Handling Division by providing specialized packaging for sensitive rubber components. The contractor is responsible for ensuring all items are packaged using opaque, waterproof, greaseproof, and UV-resistant bags in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA Packaging Requirements RP001. A critical quality mandate is that all materials used must be entirely free of mercury or mercury compounds. The scope of work concludes with the delivery of the final packaged products, ready for shipment, to the DDSP in New Cumberland. This project falls under NAICS code 339999 and is managed under the Department of Defense. Interested parties should note the response deadline of November 14, 2026.
All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 326199
New
DIBBS
Specialized O-Ring Manufacturing (NSN 5331-00-165-1975)This subcontract involves the manufacture and delivery of 11,086 high-precision O-rings for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The project requires the production of O-rings under NSN 5331-00-165-1975, adhering strictly to SAE AS3208A and SAE AMS7276J standards. To ensure compliance, the manufacturer must be Qualified Products List approved and utilize mercury-free production processes with materials that meet SAE AMS7276J specifications. Quality assurance will be managed through sampling performed according to MIL-STD-1916 or ASQ H1331. The work is categorized under NAICS code 326199 and will be performed in New Cumberland. Interested parties must note the response deadline of November 14, 2026, to provide these specialized components to the prime contractors.
All Other Plastics Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS