Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

STRAINER, SEDIMENT

Awarded

SPE7M3-26-T-1311Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Contract SPE7M326P1490 is a firm-fixed-price purchase order awarded on August 10, 2026, by the Defense Logistics Agency Land and Maritime Fluid Handling Division to Tate Andale, LLC. The contract is valued at $13,514.25 for the procurement of 1,000 sediment strainers (NSN 4730-01-689-2975). Delivery is required by April 12, 2027, with terms set as FOB Destination to the USS Florida SSGN 728. The contractor must adhere to strict military standards for packaging, marking, and labeling, specifically MIL-STD-2073-1E and MIL-STD-129. Key compliance requirements include CMMC Level 2 cybersecurity standards, the prohibition of ByteDance covered applications, and the maintenance of full supply chain traceability documentation. Invoicing must be processed electronically through Wide Area WorkFlow. The award is subject to DPAS priority ratings and various environmental and safety regulations, including the prohibition of hexavalent chromium and compliance with OSHA hazard communication standards.

General Info

DLA awarded Tate Andale $13,514.25 for 1,000 sediment strainers by April 12, 2027.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$13,514.25

NAICS

332913 - Plumbing Fixture Fitting and Trim Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Awardee

TATE ANDALE, LLC

Award Issued Date

08/10/2026, 12:00:00 AM UTC

Documents

1

SPE7M3-26-P-1490 - Order for Supplies or Services

award

Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded

PostedAug 10

Award Notice

AwardedAug 10

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

ContactsNo contact information available

Full Description

Show more

DLA award SPE7M326P1490 posted on DIBBS. Awardee: TATE ANDALE, LLC (CAGE 09032) Total Contract Price: $13,514.25 Award Date: 08-10-2026 Solicitation: SPE7M3-26-T-1311 Line items: - STRAINER, SEDIMENT (NSN/Part 4730016892975, PR 7006332156)

Similar Contracts

Same NAICS industry code

GARBAGE DISPOSAL MACHI

Solicitation # SPE8E8-27-T-0225

Solicitation SPE8E8-27-T-0225 is a fixed-price procurement issued by DLA Troop Support for the acquisition of two commercial garbage disposal machines, identified by NSN 4540-01-685-9857 and part number FD4/125-E-6(480/60/3). The requirement is managed under NAICS code 332913 and is subject to the First Destination Transportation program with shipping terms set as FOB Origin. The designated delivery location is the DDSP New Cumberland Facility in Pennsylvania, with a need ship date of April 12, 2027, and an original required delivery date of June 17, 2027. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various federal regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards. Evaluation for award may be automated and includes a price evaluation preference for HUBZone concerns, while additive manufacturing is prohibited unless specifically authorized.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

ADA Shower Material SupplierThis subcontract agreement establishes a partnership with a supplier to provide ADA-compliant fixtures and wall systems for prime contractors working on Choctaw Nation Housing Authority projects. The scope of work includes the delivery of specific materials to a site in Hugo, Oklahoma, including Swan-Stone wall surrounds with a minimum thickness of 1/4 inch, low-entry shower bases, Delta mixing valves, ADA grab bars, portable seats, and handheld faucets equipped with guide rods. All provided materials must strictly adhere to the 2019 International Residential Code and ADA accessibility guidelines to ensure full compliance. Interested parties should note that the response deadline for this opportunity is November 6, 2026.

Choctaw Nation Housing Authority

POSTED

DEADLINE

Select Soils (Borrow) SupplierThis subcontract agreement establishes a partnership with a supplier to provide certified select soils to be used as borrow material for prime contractors working on St. Tammany Parish Government infrastructure projects. The selected supplier is responsible for the procurement, hauling, and delivery of 10 cubic yards of select soils to a designated project site located in Slidell, Louisiana. To ensure project quality and structural integrity, all provided materials must strictly adhere to the technical specifications for select soils as defined by the Parish. This procurement is managed under the jurisdiction of the Louisiana state government for the benefit of St. Tammany Parish infrastructure improvements.

St. Tammany Parish Government

POSTED

DEADLINE

Solicitation # SPE7MC-27-T-1147

This solicitation, SPE7MC-27-T-1147, is a request for quotations for 53 units of a brass drain cock (NSN 4820-01-163-7156) intended for use in full track combat tanks. The component must feature MS33656-G4 ports, a special handle, and a maximum pressure rating of 250 PSI, with a dynamic temperature range from minus 20 to plus 400 degrees Fahrenheit. It requires Viton O-rings and must be compatible with fluids per MIL-L-2104, MIL-L-21260, MIL-L-46167, and VV-F-800. This is identified as a critical application item requiring Class 3 threads and compliance with QPL/QML requirements. Manufacturing may require specific casting or forging tooling, and the contractor must adhere to technical data package Revision A. The contract is a fixed-price acquisition with delivery and inspection points set at the origin, with a required delivery date of July 11, 2027. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Quality systems must meet SAE AS9003 or ISO 9001 standards. This is not a small business set-aside, though HUBZone price evaluation preferences apply. Key regulatory requirements include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted via the DLA Internet Bid Board System, and invoicing is required through the Wide Area WorkFlow system.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

TOILET, AIRCRAFT

Solicitation # SPE8E8-27-T-0141

Solicitation SPE8E8-27-T-0141 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 14 aircraft toilets, identified by NSN 4510-01-167-1057, for use on Stratolifter C/CK-135 aircraft. This is a total small business set-aside under NAICS 332913. The required delivery date is September 3, 2027, with a need ship date of July 4, 2027. While the contract is FOB Destination, offerors are instructed to submit quotes based on FOB Origin. Inspection and acceptance will occur at the destination, specifically DLA Distribution Depot Oklahoma at Tinker AFB. The procurement mandates strict adherence to DLA Master List technical and quality requirements, which take precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129, and palletization must comply with RP001. Offerors must provide a complete data package for both approved and alternate parts for technical evaluation, and the use of additive manufacturing is prohibited unless specifically authorized. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards is required. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

POSTED

DEADLINE

in about 8 hours

STOPPER, WASTE DRAIN

Solicitation # SPE7M1-27-T-0699

Solicitation SPE7M1-27-T-0699 is a Request for Quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 11 waste drain stoppers. This item is designated as a critical application item, identified by NSN 4510014605564 and part number 4259-20 from Safran Electronics and Defense. The procurement falls under NAICS code 332913, and quotes must be submitted via the DLA Internet Bid Board System by October 23, 2026. The contract specifies delivery FOB Origin with a required delivery date of February 19, 2027, and a need ship date of April 6, 2027. Supplies are to be delivered to the DLA Distribution Depot Oklahoma at Tinker AFB. Inspection and acceptance will occur at the destination. Packaging must comply with ASTM D3951 and RP001, with marking and labeling adhering to MIL-STD-129. Payment will be processed electronically through the Wide Area Workflow system. The agreement incorporates various FAR and DFARS clauses, including requirements for the Buy American Act, Berry Amendment compliance, and NIST SP 800-171 cybersecurity assessments.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

in about 8 hours

Plumbing Supplies and Fixtures VendorThis subcontract opportunity with MoDOT Transportation involves the supply and delivery of commercial grade plumbing fixtures and piping, including PVC, copper, and cast iron. The vendor will provide pipes, valves, and other plumbing components to prime contractors working on MoDOT and MHTC facility projects, with deliveries made directly to project sites or contractor shops. All provided materials must strictly comply with the Domestic Products Procurement Act. Interested parties should note that the response deadline for this solicitation is November 12, 2026.

MODOT TRANSPORTATION

POSTED

DEADLINE

Solicitation # SPE7MC-27-T-1029

Solicitation SPE7MC-27-T-1029 is a fixed-price procurement for 206 units of a drain cock, identified as a critical application item under NSN 4820012999372. The requirement specifies compatible part numbers from Oshkosh Defense LLC (2GH631) and Rolls-Royce Solutions America Inc (8925710). Delivery is required within 168 days, with an original required delivery date of March 6, 2027, and a need ship date of April 20, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, where both inspection and acceptance will occur. The contract mandates strict adherence to technical and quality standards via RA001 and DLA's master list. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001, while hazardous material labeling must follow the Hazard Communication Standard. Special restrictions include compliance with NAVSEA 5100-003D regarding mercury containment and the Buy American and Balance of Payments Program under DFARS 252.225-7001. Administrative requirements include registration in the System for Award Management and the use of Wide Area WorkFlow for electronic invoicing and receiving reports.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Transportable Temporary Housing Unit (TTHU) Retro Fit Shower and Accessories Installation Kits

Solicitation # 70FB827Q00000003

Solicitation 70FB8027Q00000003 is a full and open competition issued by the Department of Homeland Security's Federal Emergency Management Agency (FEMA) to establish a multiple award Blanket Purchase Agreement (BPA). The objective is to procure new and unused commercial household retro fit shower and accessories installation kits for Transportable Temporary Housing Units (TTHUs) to support displaced individuals with disabilities. The requirement falls under NAICS code 332913 for Plumbing Fixture Fitting and Trim Manufacturing. All products must adhere to strict accessibility and safety standards, including the Americans with Disabilities Act (ADA), Uniform Federal Accessibility Standards (UFAS), American National Standard A117.1, and the Consumer Product Safety Act. The contractor is responsible for the selection, packaging, and delivery of kits tailored to specific Mobile Home Unit configurations, with a requirement that each kit be consolidated into a single container and labeled with a detailed packaging slip. Inspection will occur at the delivery location, with final acceptance handled by the Contracting Officer's Representative (COR). Interested offerors must submit technical quotes, including a compliance matrix and past performance evaluations, to Contracting Officer Keturah Stroy by November 13, 2026. Invoicing is to be handled electronically via PDF through the FEMA Finance Center.

Community Survivor Assistance SEC

POSTED

DEADLINE

Plumbing Parts SupplierThis subcontract agreement establishes a partnership for the supply and delivery of essential plumbing parts and components to support prime contractors working on Texas Department of Criminal Justice facility projects. Specifically, the scope of work focuses on the Ellis Unit in Huntsville, Texas, where the supplier is responsible for sourcing and delivering valves, pipes, fittings, and fixtures as outlined in the procurement parts list. The contract is categorized under NAICS code 332913 and is associated with the Texas Department of Criminal Justice. Interested parties should note that the solicitation was posted on October 21, 2026, with a response deadline set for November 5, 2026. The primary objective is to ensure the timely physical delivery of all specified plumbing materials to the designated state facility.

Texas Department of Criminal Justice

POSTED

DEADLINE

Plumbing Parts and Materials SupplierThis subcontract agreement establishes a partnership for the supply of commercial-grade plumbing components, including pipes, fittings, valves, and fixtures, to support projects within the Assabet Valley Regional Vocational School District. The supplier is responsible for the procurement and delivery of these materials to either the school site or the prime contractor to facilitate essential on-call repairs and general project requirements. Managed by the AVRTVS Business Office in Massachusetts, the contract focuses on performance at the Marlborough location. Interested parties must submit their responses by November 10, 2026, to provide the specified plumbing materials and parts under the designated NAICS code 332913.

AVRTVS - AVRTVS - Business Office

POSTED

DEADLINE

Plumbing Fixtures and Piping SupplyThis subcontract for Plumbing Fixtures and Piping Supply involves providing essential plumbing materials to prime contractors for City of Santee facility projects in Santee, California. The scope of work includes the delivery of domestic water distribution piping, sanitary sewer and stormwater piping, and a variety of commercial fixtures for restrooms and kitchens, such as faucets, toilets, and sinks. The contract requires the supplier to provide substantiating data for any proposed substitutions of materials. Interested parties must submit their responses by November 9, 2026, in accordance with the solicitation posted on October 21, 2026.

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Structural Channels (NSN 9540-01-474-4371)

Fabricated Structural Metal Manufacturing

POSTED

about 16 hours ago

DEADLINE

Polyurethane Coating Supply (NSN 8010014770574)

Paint and Coating Manufacturing

POSTED

about 16 hours ago

DEADLINE

SEALING COMPOUND

Solicitation # SPE8ES-27-T-0191

Surgical Appliance and Supplies Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8ES-27-T-0148

Solicitation SPE8ES-27-T-0148 is a total small business set-aside request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of 72 cases of Resin Epoxy, identified by NSN 8040-01-664-1544. Each case must contain 12 units. The requirement is for delivery FOB Destination to the HAZMINCEN Naval Base Ventura County in Port Hueneme, California, with an original required delivery date of October 23, 2026, and a delivery window of 20 days after the order is placed. The material is classified as a Type I (Code K) item with a non-extendable shelf life of 18 months, calculated from the date of shipment. Due to the hazardous nature of the material, the supplier must provide Safety Data Sheets and Hazardous Communication Standard labels for review and approval prior to the award, adhering to 29 CFR 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with specific storage instructions to maintain a temperature between 60 and 80 degrees Fahrenheit. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates several critical federal and defense clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information. Inspection and acceptance will occur at the destination point.

Adhesive Manufacturing

POSTED

about 16 hours ago

DEADLINE

POLYURETHANE COATING

Solicitation # SPE8ES-27-T-0187

Solicitation SPE8ES-27-T-0187, issued by the Defense Logistics Agency Troop Support Construction and Equipment, is for the procurement of six kits of light gray polyurethane coating, identified by NSN 8010014770574. Each kit consists of a gallon can containing 2100g of polyurethane, a 144g bottle of curing agent, and a stir stick. The items are subject to a non-extendable shelf life of 12 months and must be delivered to Borcea Air Base, Romania, with an original required delivery date of October 26, 2026. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to hazardous material standards, requiring the submission of Safety Data Sheets and labels in accordance with 29 C.F.R. 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including Special Marking Code 32 for shelf-life items. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the prohibition of certain telecommunications equipment.

Paint and Coating Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E5-27-T-0303

Saw Blade and Handtool Manufacturing

POSTED

about 16 hours ago

DEADLINE

ELBOW, HOSE, FIRE FIG

Solicitation # SPE8E6-27-T-0374

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

STEP ASSEMBLY, GRIP

Solicitation # SPE8E6-27-T-0294

Solicitation SPE8E6-27-T-0294 is a request for quotation issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one Step Assembly, Grip, identified by NSN 4210015694605 and Pierce Manufacturing Inc part number 1348996. The requirement is categorized under NAICS code 326111. Delivery is required within 10 days of award, with an original required delivery date of May 6, 2026. The shipment is FOB Origin and will be delivered to the South Carolina Army National Guard in Eastover, South Carolina. Inspection and acceptance will take place at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirements RP001, with the DLA Master List of Technical and Quality Requirements taking precedence. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. The contract incorporates numerous FAR and DFARS clauses, including requirements for safeguarding covered defense information, Buy American Act compliance, and the prohibition of certain telecommunications equipment. Offerors must represent their size status and domestic origin of supplies, and the procurement is subject to destination inspection per FAR 52.246-1.

Plastics Bag and Pouch Manufacturing

POSTED

about 16 hours ago

DEADLINE

MARKER, IDENTIFICATION

Solicitation # SPE8E5-27-T-0304

POSTED

about 16 hours ago

DEADLINE

EXTINGUISHER, FIRE

Solicitation # SPE8E6-27-T-0384

All Other Miscellaneous Textile Product Mills

POSTED

about 16 hours ago

DEADLINE

LIGHT, NAVIGATIONAL, AIR

Solicitation # SPE8E7-27-T-0129

Solicitation SPE8E7-27-T-0129 is a fixed-price procurement issued by the Defense Logistics Agency Troop Support for one aircraft navigational light, identified by NSN 6220015760036 and part number 30-3055-1. The requirement is for a single unit with an original required delivery date of October 7, 2026, and a delivery lead time of 20 days after receipt of order. Delivery is FOB destination, with shipping addresses provided for both a parcel post location in the United States and a freight destination at Kadena Air Base in Okinawa, Japan. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with palletization following DLA requirement RP001. Invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation includes various DFARS and FAR clauses covering cybersecurity, whistleblower rights, and prohibitions on certain telecommunications equipment. Offerors must submit quotes via the DIBBS portal by October 26, 2026, and are encouraged to provide quantity ranges. Evaluation may include a HUBZone price preference, and the submission of a Safety Data Sheet is required for hazardous materials to avoid being deemed non-responsible for award.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E6-27-T-0380

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 16 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Pneumatic Valve and Solenoid Supply

Cg ACADEMY(00039)

POSTED

CLOSED

about 2 months ago

Sink Drain Assemblies Supply

245-NETWORK Contract Office 5 (36C245)

POSTED

CLOSED

Precision Valve Overhaul and Reassembly

Puget Sound Naval Shipyard IMF

POSTED

CLOSED

Solicitation # W911S226U4017

W6QM Micc-Ft Drum

POSTED

CLOSED

Military Shipment Marking & Barcoding (MIL-STD-129 Compliance)

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

CLOSED

Drain Valve Assembly Supply

Defense Logistics Agency

POSTED

DEADLINE

Flush Valve Assembly Supply

Defense Logistics Agency

POSTED

DEADLINE

Supply of Stainless Steel Globe Valve (NSN: 4820010422921)

Defense Logistics Agency

POSTED

CLOSED

Manufacture of Wear-Coated Gate Valves

DLA DIST SAN JOAQUIN

POSTED

CLOSED

Precision Machining and Fabrication of Gate Valve Assembly

POSTED

CLOSED

Supply of Flush Valve (NSN 4510015793370)

POSTED

CLOSED

Supply and Delivery of Pipe Plug (NSN: 4730014733586)

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS