This Solicitation opportunity from Department Of Defense was posted on August 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

STRAND, WIRE

Closed

SPE4A5-26-T-332QFederal

Submission Closed08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332618

New

DIBBS

53--PIN,QUICK RELEASE

Solicitation # SPE7L1-26-T-11C8

This contract is a solicitation for the procurement of 11 quick release pins, identified by NSN 5315-01-727-6779. The requirement is issued by the Department of Defense Land Supply Chain and is designated as a total small business set-aside under NAICS code 332618. Delivery is required within 57 days, with a required delivery date of September 3, 2026, and shipment is to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract specifies a zero percent quantity variance and requires compliance with various DLA master lists for technical, quality, and documentation requirements.

POSTED

DEADLINE

Supply of O-Rings (NSN 5331-01-181-4941)

POSTED

DEADLINE

Supply of O-Rings (NSN 5331-01-007-4895)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Specialized Wire and Connector Supply

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Stainless Steel Tensioner Belt

Defense Logistics Agency

POSTED

DEADLINE

Supply of Straight Headless Pins (NSN 5315-01-552-1148)

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of PRI-Accredited Synthetic Rubber O-Rings

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-392R

This contract is for the procurement of synthetic rubber O-rings, specifically part number MS29513-155 under NSN 5331005293723. The requirement consists of two line items totaling 451 units, with 225 units destined for DLA Distribution New Cumberland and 226 units for DLA Distribution Barstow. The items must be produced by an accredited manufacturer listed on the PRI Qualified Manufacturer List (QML) or Qualified Products List (QPL) and must adhere to SAE AS29513 and SAE AMS-P-5315C standards. Key technical requirements include a non-extendable shelf life of 180 months and a strict prohibition on the intentional addition of mercury or asbestos. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, utilizing medium-duty, waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays. Delivery is required within 105 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination.

FLUID HANDLING DIVISION

POSTED

DEADLINE

SWA GING SLEEVE, WIRE

Solicitation # SPE4A6-26-R-XD83

Solicitation SPE4A6-26-R-XD83 is a Total Small Business Set-Aside issued by the DLA Aviation ASC Commodities Division for the procurement of wire rope swaging sleeves (NSN 4030004315537). The requirement may result in multiple Simplified Indefinite-Delivery Contracts (SIDC) with a five-year term or an aggregate ceiling of 350,000 dollars. The scope includes a guaranteed minimum of 173 units (where one unit equals 100 each) for the first base year, with potential delivery orders ranging up to 1,050 units and a monthly wartime rate of 56 units starting 30 days after award. Technical requirements specify that the sleeves must be zinc coated per ASTM B633 and packaged according to MIL-STD-2073-1E and MIL-STD-129. Due to the nature of the technical data, offerors must maintain an approved US/Canada Joint Certification Program certification to comply with ITAR or EAR export controls. Additionally, the contract requires CMMC Level 2 cybersecurity certification. Awards will be based on the most advantageous offer, considering price, past performance, and quoted delivery, with past performance weighted more heavily than delivery. Inspection and acceptance will occur at the source, and all invoicing must be processed through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-393Z

Solicitation SPE7M4-26-T-393Z is a Request for Quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 663 O-rings under NSN 5331-01-007-4895. The items are identified as commercial products and are designated as critical application items. They must adhere to specific technical standards, including SAE AS3209C Revision C and SAE AMS7276J Revision J. Additionally, the items are subject to Qualified Products List requirements maintained by the Performance Review Institute. The required delivery timeline is 170 days, with a need ship date of September 10, 2026, and an original required delivery date of August 9, 2027. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill at Hill AFB, Utah. The contract imposes strict material and environmental restrictions, prohibiting the use of class I ozone-depleting chemicals, asbestos, and the intentional addition of mercury or mercury-containing compounds. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001, with a specific requirement for Special Marking Code 32 to denote a non-extendable shelf life of 240 months. Offerors must comply with the Buy American Act and the Berry Amendment, and they are prohibited from using additive manufacturing processes unless authorized. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Quotations were due by September 21, 2026, under NAICS code 332618.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-09N5

Solicitation SPE7L1-26-T-09N5, issued by DLA Land and Maritime, is a request for quotations for 1,330 O-rings (NSN 5331-01-107-4950) designated as critical application items. The procurement falls under NAICS code 332618 and requires delivery to Robins AFB, Georgia, within 126 days. This is a Qualified Products List (QPL) and Qualified Manufacturers List (QML) item, meaning the supplier must be an accredited manufacturer or distributor and provide specific identification details, including manufacturing and source CAGE codes, item name, service identification, and test numbers. The items must have a non-extendable shelf life of 180 months and be entirely free of asbestos. Strict packaging and material standards apply, including the use of opaque barrier bags to protect against UV rays and cushioning material to prevent deformation. All marking must comply with MIL-STD-129, and packaging must follow MIL-STD-2073-1E and DLA RP001 requirements. The contract prohibits the use of class I ozone-depleting chemicals and mercury compounds. Offerors must comply with the Buy American Act and the Berry Amendment, with a reduced threshold of 150,000 dollars. Submissions are handled via the DIBBS system, and the government may utilize a HUBZone price evaluation preference for award. Payment and receiving reports are to be processed electronically through the Wide Area WorkFlow (WAWF) system.

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-28UT

Solicitation SPE4A6-26-T-28UT is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 15 plain tapered pins, identified by NSN 5315-01-453-8363 and part number 845-7016077-X-071. This item is designated as a critical application item and must be produced according to technical drawing TDP Rev A Gen 2, basic drawing 53711 7016077, revision XA. The procurement is governed by NAICS code 332618 and includes a price evaluation preference for SBA-certified HUBZone small business concerns. Delivery is specified as FOB Destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a delivery window of 141 days. The contract mandates strict quality and technical compliance, requiring the manufacturer's inspection system to meet SAE AS9003 or ISO 9001 standards. Inspection and acceptance will occur at the origin per RQ009, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with a specific prohibition on mercury or mercury compounds. Additionally, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information and CMMC Level 2 certification.

ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

The contract is for the procurement of 46,752 linear feet of zinc-coated steel wire strand, 3/32 inch in diameter, with a left regular lay, preformed construction and wire strand core, supplied in 2,500-foot reels. Delivery is required FOB origin within 93 days of order, with a need ship date of November 15, 2026, and an original delivery deadline of February 6, 2027, to DLA Distribution in San Diego, California. The acceptance and inspection points are at the destination, and the quantity may vary by plus or minus 10 percent. All materials must comply with the DLA Master List of Technical and Quality Requirements, incorporating referenced technical specifications via R or I numbers, and adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Packaging and preservation must exclude mercury or mercury compounds in any form, consistent with IP056, and palletization must meet DLA Packaging Requirements (RP001). Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Item Unique Identification is not required due to a service customer request under DFARS 252.211-7003(c)(1)(i), and no shelf life requirement applies. The product is designated as a critical application item and must meet the Technical Data Package Rev B Gen 4 per RR-W-410J. Payment must be submitted electronically through Wide Area WorkFlow (WAWF), and contractors must be registered and compliant with applicable DFARS and FAR clauses including 52.222-50, 52.223-3, 52.223-23, 252.240-7997, and 252.232-7003. The solicitation issued on August 5, 2026, with a response deadline of August 13, 2026, under NAICS code 33261

General Info

46,752 linear feet of zinc-coated steel wire strand, FOB origin, 93-day delivery, zero non-conformances, DLA San Diego, NSN 4010-00-222-5346

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-332Q Request for Quotations DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 5

Solicitation

Response DeadlineAug 13

Deadline has passed

Submission Closed

08/13/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressUSA

Contacts

Hien-Van Trinh

contact@example.gov

+1 (555) 000-0000

Full Description

STRAND,WIRE
WIRE ROPE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
STEEL, ZINC COATED
3/32 INCH DIAMETER
LEFT REGULAR LAY, PREFORMED, WIRE STRAND CORE
2500 FT PER REEL
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
SPE4A5-26-T-332Q
SECTION B
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
CRITICAL APPLICATION ITEM
TDP Rev B Gen 4 IAW BASIC UNK RR-W-410J(1) REVISION NR J DTD 01/03/2022 PART PIECE NUMBER: RR-W-410 TY5 CL1
TDP Rev B Gen 4 IAW REFERENCE QAP 13873 CDRLCOQC26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016849129 0001 FT 46,752.000
NSN/MATERIAL:4010002225346
DELIVERY (IN DAYS):0093
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
SPE4A5-26-T-332Q
SECTION B
PR: 7016849129 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:11/15/2026 Original Required Delivery Date:02/06/2027
SPE4A5-26-T-332Q NSN/Part Number: 4010-00-222-5346 Quantity: 46,752 FT Purchase Request: 7016849129QTY: 46752 Delivery: 93 days ADO