Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

STRAP, RETAINING

Active
SPE7L1-26-T-846DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation SPE7L1-26-T-846D seeks the procurement of 28 retaining straps with NSN 5340-01-608-2639, delivered to New Cumberland, Pennsylvania, within 249 days after award. The item is subject to stringent export control regulations under ITAR or EAR, requiring contractors to have an approved US/Canada Joint Certification Program status, complete mandatory DLA export control training, and obtain formal approval to access the technical data. Contract performance must adhere to multiple Defense Logistics Agency and Department of Defense standards including MIL-STD-129 for packaging and labeling, MIL-STD-130N for permanent item identification via Data Matrix barcodes, and ASTM D3951 or RP001 for commercial-grade packaging. Hazardous materials must be labeled per OSHA’s Hazard Communication Standard and transported with strict compliance to U.S.-flag vessel requirements under 252.247-7023. Cybersecurity compliance is mandatory, with contractors required to meet NIST SP 800-171 controls and maintain CMMC Level 2 certification as a C3PAO for handling controlled unclassified information, while also complying with DFARS 252.204-7012 for cyber incident reporting. Contract administration mandates electronic invoicing through WAWF, with all payments routed via DoDAACs and no paper-based submissions permitted. The solicitation requires full socioeconomic representation in SAM, including certifications for small, HUBZone, WOSB, EDWOSB, or SDVOSB status, and prohibits unauthorized additive manufacturing. All submissions must be made through the DIBBS portal by July 27, 2026, and no formal contract type has been determined—delivery will be governed by a fixed-price structure pending the contracting officer’s final award decision.

General Info

Procure 28 retaining straps to Pennsylvania within 249 days, compliant with ITAR, CMMC Level 2, NIST, and DOD packaging standards.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-846D for DLA Land and Maritime

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS

Full Description

Show more
STRAP,RETAINING
STRAP,RETAINING:
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5340-01-608-2639 Quantity: 28 EA Purchase Request: 7017528848QTY: 28 Delivery: 249 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EXThis contract is for the procurement of 12,382 self-locking, extended washer hexagon nuts with NSN 5310-00-807-1474 under a Firm Fixed Price Indefinite Delivery Purchase Order (IDPO) with a three-year base period and no options, subject to a total maximum contract value of $1,000,000. The delivery is due 405 days after award, with FOB origin terms, and the item is designated by the Navy as a Critical Safety Item requiring strict compliance with quality and sourcing controls. The nuts must conform to NASM21042 Revision 3 and NASM25027 Revision 1, alongside comprehensive technical and quality requirements from the DLA Master List, with inspection and acceptance performed at origin. Sampling must adhere to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with verification levels assigned as VII for critical, IV for major, and II for minor attributes, and unspecified attributes treated as major. All items must be marked per MIL-STD-129, including lot and serial numbers, contractor and actual manufacturer CAGE codes, and part numbers, with packaging compliant with MIL-STD-2073-1E and DLA Packaging Requirements, and no mercury or mercury compounds permitted except under specific exceptions for functional uses in batteries, instruments, weapon systems, or NAVSEA-specified reagents, with portable devices requiring shock-proofing and secondary containment. The contract mandates adherence to multiple federal and defense acquisition regulations, including clauses on termination, excusable delays, changes, and prohibitions on certain telecommunications equipment, and requires electronic invoicing via WAWF. Offerors must be registered in SAM and complete required representations, including certifications regarding foreign ownership, export control, and inverted domestic corporations, with a deviation applied to 52.204-19. Export-controlled technical data subject to ITAR or EAR is involved, limiting participation to contractors with approved US/Canada Joint Certification Program credentials, completed DLA export training, and DLA authorization. Only small businesses are eligible under a total small business set-aside, and the award will be based on a best-value determination weighing price, past performance, and delivery performance, with past performance—particularly PIPRS assessments, quality history, and delivery compliance—weighed more heavily than quoted delivery. The contractor must maintain an approved inspection system
ASC COMMODITIES DIVISION

POSTED

in about 2 hours

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAINThe contract specifies the procurement of one plain stud, part number 5307-01-605-3869, with a purchase request number 7017456966, under solicitation SPE4A6-26-T-06YP. Delivery is required within 20 days to FOB destination, with inspection and acceptance occurring at the delivery point. The item must be packaged in accordance with MIL-STD-2073-1E, using packaging method 41, dry preservation, and marked per MIL-STD-129 with no special marking required. Palletization must comply with DLA packaging requirements, and the item must be shipped to the specified FPO address in the U.S. Naval Supply System. The contract enforces strict sampling standards, requiring zero non-conformances in the sample lot unless otherwise specified, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and the applicable revision is determined by the solicitation or award date depending on acquisition size. The unit of issue is EA, with no variance allowed in quantity, and the required delivery date is July 9, 2026. Additional logistics and transportation instructions are outlined in DLAD procedural notes, and the vendor must use VSM for shipment. The contracting officer is Duane Watkins, and all government use codes and identifiers are included for administrative tracking.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThis contract specifies the procurement of a flat washer identified by NSN 5310015134647 and part number GBV-F2-80-0001 from B N L Industries Inc, with a single unit quantity requiring delivery within 120 days from the contract date. The item is designated as a critical application item, subject to stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA packaging requirements, and all items must be labeled and marked per physical identification standards. Sampling and inspection follow MIL-STD-1916 or comparable zero-based methods, with zero non-conformances required unless otherwise stated, and critical attributes are verified at verification level VII. The item has no shelf life requirement and does not require Item Unique Identification per customer request. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The unit of issue is each, and no quantity variance is permitted. The required ship date is November 22, 2026, with an original delivery deadline of October 14, 2026. All transportation and shipping protocols must adhere to DLAD Proc Notes C19 and C20, and the purchasing request number is 7017529398 under solicitation SPE4A6-26-T-07CU.
ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details