Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

STRAP, RETAINING

Active
SPE7L2-26-T-0582Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of STRAP, RETAINING, identified by NSN 5340-01-733-4727 and part number 900372, with a total quantity of five units to be delivered within 116 days from the contract award. The items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, while marking must follow MIL-STD-129 with no special marking codes applied. Palletization requirements are governed by DLA Packaging Requirements, and all items must be delivered FOB origin to the designated freight shipping address in New Cumberland, Pennsylvania. The contract prohibits the use of Class I ozone-depleting chemicals in any component, overriding any conflicting specification requirements, and mandates approval for alternative chemicals unless explicitly permitted. Goods are subject to inspection and acceptance at the delivery point, with no variance permitted in quantity. The procurement is part of a Department of Defense acquisition under NAICS code 332510, solicited under SPE7L2-26-T-0582, with a response deadline in August 2026 and a required delivery date of April 19, 2027. All items must also be marked in accordance with MIL-STD-130N for U.S. military property identification, and the contractor must ensure removal of government identification from non-accepted supplies. Transportation logistics are defined by DLA procedural notes, and the contract is subject to potential coverage of defense information under applicable regulations.

General Info

Five retaining straps delivered FOB origin by April 19, 2027, per MIL-STD and DLA requirements.

Agency

Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLESView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES
View Agency Profile
Office AddressUS
Contacts
Shaun Sehgal
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STRAP,RETAINING
STRAP,RETAINING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
GM DEFENSE LLC 97DN1 P/N 17210084 IMPACT RACING, INC. 3UKX4 P/N 900372
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017677312 0001 EA 5.000
NSN/MATERIAL:5340017334727
DELIVERY (IN DAYS):0116
DELIVER FOB: ORIGIN
SPE7L2-26-T-0582
SECTION B
PR: 7017677312 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:00/00/0000 Original Required Delivery Date:04/19/2027
SPE7L2-26-T-0582 NSN/Part Number: 5340-01-733-4727 Quantity: 5 EA Purchase Request: 7017677312QTY: 5 Delivery: 116 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9071
The contract pertains to the procurement of a mounting bracket identified by NSN 5340014817021 and part number BTS/RT35R, with a quantity of 201 units to be delivered FOB origin within 116 days. The acquisition is under DLA Direct, CONUS coverage and is structured as a total small business set-aside under NAICS code 332510. Packaging must comply with DLA’s master requirements, specifically RP001 and SPE7LX-26-U-9071, mandating adherence to MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the item is hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All DLA technical and quality requirements referenced by R or I numbers in the DLA Master List supersede any conflicting commercial standards. The unit of issue is each, with zero variance allowed in quantity, and inspection and acceptance occur at destination. Packaging must be palletized per RP001, and the unit of issue and quantity per unit pack must match contract specifications exactly. Deliveries are subject to government identification removal from non-accepted supplies as per RQ011. The solicitation number is SPE7LX-26-U-9071, issued July 29, 2026, with responses due August 13, 2026, and the point of contact is Theodore Misiolek with the Strategic Acquisition Program Directorate.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-889S
The contract pertains to the procurement of a Right Hand Single Arm Mounting Bracket, identified by NSN 5340016150030 and part number 3764286, with a total quantity of 2,100 units divided into two line items: 100 units under CLIN 0001 and 2,000 units under CLIN 0002. Delivery is required within 116 days of contract award, with FOB Origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must comply with MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA’s packaging and palletization guidelines. The product must be marked in accordance with MIL-STD-130N for government property identification, and sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified. The contract references the DLA Master List of Technical and Quality Requirements, incorporating all applicable R and I numbers, and adheres to hazardous materials shipping protocols per IP025. Deliveries are directed to two DLA distribution facilities in Tracy, CA, and New Cumberland, PA, with a need-to-ship date of March 2026 and an original delivery deadline of April 2027. The solicitation, numbered SPE7L1-26-T-889S, is a Total Small Business Set-Aside under NAICS 332510, issued by the Department of Defense’s Land Supply Chain, with Michael Nordahl listed as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-26-T-10EN
The contract pertains to the procurement of two straight headless pins with NSN 5315-01-048-6697 and part number 41000995 manufactured by Woodward HRT Inc, under solicitation SPE4A6-26-T-10EN. The items are required for delivery within 20 days to a military facility in Kaohsiung, Taiwan, with FOB origin terms and inspection and acceptance performed at the point of origin. The units are to be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129, using prescribed packaging levels, materials, and coding, and must be palletized according to DLA’s packaging requirements. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned default verification levels or AQLs. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the acquisition size and solicitation timeline. The total quantity is two units at a unit price of $2.00, with no variance allowed in quantity. Special marking is not required, and the shipment must be forwarded per DLA procedural notes C19 and C20. The contract’s original required delivery date is July 31, 2026, and the primary point of contact is Summer Allen at the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BUMPER
Solicitation # SPE7L1-26-T-890R
This contract solicitation specifies the procurement of 280 nonmetallic bumpers under NSN 5340-01-044-6499 with a delivery requirement of 256 days after award. The contract is issued under solicitation number SPE7L1-26-T-890R and is open to full and open competition with no set-aside restrictions. Technical and quality requirements are defined by referenced R and I numbers from the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on the acquisition size. The product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized by existing specifications. All technical data associated with this item is subject to export controls under either ITAR or EAR, and dissemination is strictly limited to contractors with approved US/Canada Joint Certification Program status, completed DOD training on export-controlled data handling, and formal DLA authorization. The Defense Logistics Agency enforces strict compliance with DFARS 252.225-7048 regarding export-controlled information, including restrictions on disclosure to foreign nationals regardless of location. Additionally, contractors must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements and adhere to DLA packaging and removal standards for government identification on non-accepted supplies. The place of performance is Hill Air Force Base, Utah, with primary point of contact information provided for inquiries.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-10HE
The contract specifies the procurement of 3,272 units of a threaded pin-rivet with part number ST3M758C3-3 and NSN 5320-01-132-2220, issued under solicitation SPE4A6-26-T-10HE by the Defense Logistics Agency’s ASC Commodities Division. The item is critical to defense applications and may require casting or forging during manufacturing, with special tooling typically involved that the government does not possess; sourcing inquiries must be directed through official casting and forging assistance channels. Only approved suppliers—including Hi-Shear Corp, Alcoa Global Fasteners, SPS Technologies, Air Industries, and West Coast Aerospace Corp—are authorized to supply this part. The contract mandates strict compliance with DLA technical and quality requirements, documented in the DLA Master List, and enforces rigorous identification protocols requiring bare item marking per RQ017, though unique item identification is waived by service customer request. Export control restrictions apply due to ITAR or EAR coverage, limiting access to contractors with approved US/Canada Joint Certification Program status, completed DLA export training, and formal authorization. All technical data handling, packaging, inspection at origin, and configuration change management are bound by DLA standards including RP001, RQ002, RQ009, and RQ011. Delivery is due within 124 days of award, with a response deadline for offers set for August 6, 2026, and cybersecurity compliance at CMMC Level 2 is required for third-party assessors involved.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
DISK, SOLID, PLAIN
Solicitation # SPE7L1-26-T-889Z
The contract is for five solid plain disks with NSN 5340-00-524-0559 under solicitation SPE7L1-26-T-889Z, with a response deadline of August 10, 2026, and delivery required within 20 days after order placement. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA requirements, and all government identification must be removed from non-accepted supplies. The item includes technical data subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring DFARS 252.225-7048 compliance. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and the DLA questionnaire. The contract is managed by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact, and falls under NAICS code 332510 for federal procurement.
LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
Federal
LOCKPLATE,F-R,2S
Solicitation # N0010426QEC09
The contract pertains to the procurement of a Lockplate, F-R, 2S under solicitation N0010426QEC09, issued by the Naval Supply Systems Command Weapon Systems Support Mechanic, with a response deadline of August 28, 2026. Pricing is valid for 60 days after the closing date unless otherwise specified, and vendors must review the mandatory Individual Repair Part Ordering Data (IRPOD) available via the BPMI website, which requires pre-registration. The contract incorporates a hierarchy of governing documents, with contract amendments taking precedence over the schedule, terms and conditions, and then IRPOD, followed by technical specifications, drawings, and standards. Contractors must use referenced documents in their entirety and obtain prior written approval from the Contracting Officer for any deviations or use of later revisions. Compliance with cleanliness control standards such as MIL-STD-767 and MIL-STD-2041 is required where invoked, with packaging governed by MIL-PRF-23199 and MIL-DTL-24466 green poly bags under specific conditions, while fire-retardant packaging is no longer required. Mercury or mercury-containing compounds are strictly prohibited from contact with supplied hardware. Quality assurance requirements are defined in the IRPOD, and contractors must maintain complete inspection records accessible to the government throughout performance and beyond. All contractual documents are considered issued upon electronic transmission, email, or fax, with acceptance of the proposal forming a bilateral agreement. Technical data packages (TDPs) referenced via DD Form 1423 include detailed instructions on data submission, including delivery frequency, approval codes, distribution restrictions, and pricing groups, with specific codes governing inspection and acceptance authority at source or destination. Contractors must submit certified test and inspection reports per DI-QCIC-8872, in separate packages for each unique NSN and item nomenclature, and obtain PCO authorization prior to shipment. Distribution of technical documents follows DoDI 5230.24 with six defined codes limiting dissemination to U.S. government agencies, DoD contractors, or restricted entities. The contract mandates use of Wide Area Workflow for payment and requires compliance with cybersecurity maturity model certification levels, total small business set-aside provisions, and security exclusions. Transportation by sea and priority rating under national defense programs further apply. Vendor waivers or deviations must include full justification, technical data supporting the proposed change, and evaluation demonstrating no adverse impact on fit, form, or function
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332510
New
Federal
FAN DAMPER RING
Solicitation # N0010426QEC08
The contract pertains to the procurement of a Fan Damper Ring, specified by part number 930-49564-1, manufactured by L3Harris Maritime Power & Energy Solutions Inc with CAGE code 04801, and governed by detailed technical requirements including adherence to drawing 930-49564 and MIL-STD-129 for marking and labeling. The item must be supplied with at least 85% of its 60-month shelf life remaining at time of shipment, with mandatory inclusion of cure and expiration dates on packaging. Packaging must conform to MIL-PRF-23199, with heat-sealed envelopes required for cleanliness-controlled components, and the use of MIL-DTL-24466 green poly bags is permitted only when specific cleanliness standards from MIL-STD-767, MIL-STD-2041, Refueling Clean, or Reactor Plant Clean are invoked. Fire retardant packaging is explicitly prohibited. The contractor must comply with the specified revision levels of referenced documents and must not mix revisions without explicit government approval. Deviations from technical or delivery requirements must be formally requested with justification, supporting technical data, and evaluation demonstrating no impact on form, fit, or function, and must be submitted to the Government Quality Assurance Representative for comment before review by the Post-Award Contracting Officer. All contractual documents are considered issued upon electronic transmission via email or other authorized methods, and pricing is valid for 60 days after the solicitation closing date unless otherwise specified. The solicitation, numbered N0010426QEC08, was posted on July 29, 2026, with a response deadline of August 28, 2026, and falls under NAICS code 332510. The award is subject to mandatory use of Workflow Pro assist module, Wide Area Workflow payment instructions, and cybersecurity maturity model certification requirements, with total small business set-aside and priority rating for national defense applications also applicable. The contractor must provide an acceptable government inspection system, maintain complete records, and submit a Certificate of Compliance per DI-MISC-81356 and a Cure Date Certificate per DI-MISC-81318 at time of delivery for each unique contract, NSN, and item nomenclature combination. Technical documentation must be obtained via the secure Logistics.UNNPP.GOV portal with pre-registration, and distribution
Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332510
New
Federal
53--COVER,ACCESS
Solicitation # SPE7L426U1030
The solicitation seeks quotes for the procurement of 3 COVER ACCESS units under NSN 5340016934986, with delivery required within 16 days after award, shipped to various CONUS and OCONUS DLA depots via consolidation and containerization points. This is a Small Business Set Aside under NAICS code 332510, and the contract will be structured as an Automatic Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, whichever comes first; the guaranteed minimum order is one unit, with an estimated one order annually. The only approved source is 0WJE1 75011-100-SV, and no specifications, plans, or drawings are available. All responsible sources may submit electronic quotes, and hard copies are not provided. The solicitation is open for quotation through August 13, 2026, and must be submitted via the SAM.gov portal using the provided link. Questions should be directed via email to the designated buyer listed in the solicitation document, with additional information accessible through the DIBBS platform. The contracting office is located in Columbus, Ohio, under the Department of Defense’s DLA Land and Maritime.
DLA Land And Maritime

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
Federal
20--DOOR,METAL,MARINE S
Solicitation # SPE7M126T237Y
The U.S. Department of Defense through DLA Land and Maritime is seeking quotations for 26 metal marine doors with NSN 2040012534544 under solicitation SPE7M126T237Y, which is a Small Business Set Aside with NAICS code 332510. The requirement is for delivery to W1A8 DLA Distribution within 140 days of award, with all quotes required to be submitted electronically through the SAM.gov platform. The solicitation is accessible only online via the provided link, and no hard copies are available; digitized drawings and applicable military specifications must be retrieved electronically. The response deadline is August 10, 2026, and all responsible sources are invited to submit quotes provided they meet the timing and submission requirements. Primary questions regarding the solicitation must be directed via email to DibbsBSM@dla.mil, with additional details available on the DIBBS portal using the solicitation number. The contracting office is located in Columbus, Ohio, and the place of performance is not specified beyond the delivery destination. This procurement is classified as combined, meaning it is not exclusively for commercial or non-commercial items, and eligibility is restricted to small businesses as defined by the SBA.
DLA Land And Maritime

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
SLED
Supply of Door Locks and Security HardwareThe contract requires the supply of commercial-grade door locks, latch sets, deadbolts, panic hardware, and associated components that meet original specifications for use in state-supported living facilities operated by the Texas Health and Human Services Commission. All products must comply with industry standards for durability, security, and accessibility, ensuring long-term reliability in high-traffic institutional environments. The supplier must provide hardware that integrates seamlessly with existing door systems and adheres to relevant safety and building codes applicable to healthcare and residential care settings. The solicitation was posted on July 28, 2026, with a response deadline of August 12, 2026, at 4:30 PM. This is a subcontract under NAICS code 332510, which classifies the work as manufacturing architectural and structural metals, indicating the focus on fabricated security hardware rather than mere distribution. Performance of the contract is expected to occur within Texas, though specific location details are not provided. Interested parties must submit proposals through the Texas SmartBuy portal, and all items must be delivered and installed to meet facility operational requirements without disruption to resident care or safety protocols.
Health and Human Services Commission

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
Manufacture of Military-Grade Cushioning PadsThe contract requires the full manufacturing of two units of military-grade cushioning pads identified by NSN 5340-01-670-8433, adhering strictly to Department of Defense standards and quality requirements. Production must comply with ISO 9001:2015 quality management systems and meet MIL-STD-130N marking specifications to ensure proper identification and traceability throughout the supply chain. The product is subject to zero-defect acceptance criteria, meaning every unit must be flawless upon inspection and delivery. The work is to be performed at Chambersburg, Pennsylvania, with a delivery window tightly aligned to the response deadline of August 10, 2026. This subcontract falls under NAICS code 332510, indicating it is related to forging and stamping manufacturing, and is under the purview of the Land Supply Chain within the Department of Defense, emphasizing its critical role in military logistics and equipment readiness.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS WHEELED VEHICLES

Same awarding agency

NAICS: 332999
New
DIBBS
HOOD, ENGINE COMPARTMEN
Solicitation # SPE7L2-26-T-0557
The contract specifies the procurement of a HOOD, ENGINE COMPARTMENT with NSN 2510017278748, requiring delivery of 17 units under a fixed-price arrangement with FOB Origin terms. The delivery must be completed within 58 days after award, no later than November 27, 2026, to the DLA Distribution facility in New Cumberland, Pennsylvania. Strict compliance with MIL-STD-2073-1E packaging standards is mandated, using Packaging Code U, CLNG/DRY preservation method, JA wrap material, JC cushioning, and no preservation material. Marking must adhere to MIL-STD-129, including special ZZ-coded instructions: ARROW UP, OPEN THIS SIDE, and TEAM LIFT REQUIRED, with palletization following DLA’s RP001 requirements. The use of Class I ozone-depleting chemicals is explicitly prohibited, replacing all specification-based allowances without relaxing product performance standards, and any substitute chemicals require prior approval unless already authorized. Technical and quality requirements are governed by the DLA Master List (RA001), and the item is classified as a critical application item. Cybersecurity obligations apply under NIST SP 800-171, and covered defense information may be involved, triggering compliance with DFARS clauses on data protection and cybersecurity incident reporting. Hazardous materials must be labeled per 29 CFR 1910.1200, with associated Safety Data Sheets submitted in compliance with Federal Standard No. 313. The contract incorporates multiple FAR and DFARS clauses modified by deviations, including requirements for equal opportunity, combating trafficking, employment eligibility verification, sustainable products, accelerated payments to small business subcontractors, and prohibitions on unauthorized obligations. Invoicing must be processed via Wide Area WorkFlow, and the contractor must affirm representations regarding UEI, CAGE code, size status, and potential provision of covered telecommunications equipment. All proposals must be submitted electronically through DIBBS by the deadline of July 30, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in about 17 hours
View Details
NAICS: 334220
New
DIBBS
Supplier of Covered Defense Telecommunications Equipment (If Applicable)The contract requires suppliers to identify and disclose any covered defense telecommunications components embedded within marine windows, if such components are present in their products. This obligation applies specifically to subcontractors providing items related to the NAICS code 334220, which pertains to communications equipment manufacturing, and is part of a broader effort to ensure compliance with defense telecommunications security requirements. The solicitation is issued under the Department of Defense, specifically managed by the Land Supplier Opns Wheeled Vehicles office, and performance is required at the location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Respondents must submit their disclosures by the deadline of August 6, 2026, and the contract type is classified as a subcontract, indicating it supports a larger procurement effort rather than a direct government purchase. The supplier must determine whether their marine window products contain any covered telecommunications equipment as defined by federal regulations and provide full transparency regarding such components.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
Domestic and International Transportation LogisticsThe contract requires the arrangement and management of domestic and international transportation logistics for marine windows, with delivery specified to New Cumberland, Pennsylvania, and mandates the use of U.S.-flag vessels for all ocean transport segments. The work is classified under NAICS code 488510, indicating it falls under support activities for water transportation, and is structured as a subcontract under the Department of Defense’s Land Supplier Ops Wheeled Vehicles division. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and the place of performance is clearly identified with the zip code 17070-5002. The requirement emphasizes compliance with U.S. flag vessel regulations for ocean leg transit, underscoring the importance of adhering to maritime statutes and supply chain security protocols throughout the shipment process.
Freight Transportation Arrangement

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling, and Barcoding ServicesThe contract requires the provision of packaging, preservation, and labeling services for marine windows that fully comply with MIL-STD-129 standards, ensuring secure and standardized handling throughout the supply chain. All items must be labeled with machine-readable barcodes to enable automated tracking and inventory management, with strict adherence to military specifications for durability, clarity, and traceability. The work must be performed to support the Department of Defense’s logistical needs, specifically under the oversight of the LAND SUPPLIER OPNS WHEELED VEHICLES office, with performance required at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. This is a subcontract opportunity classified under NAICS code 561910, and responses are due by August 6, 2026. While no set-aside type is specified, the solicitation is focused on securing a vendor capable of delivering precise, compliant packaging and labeling solutions to enhance supply chain visibility and operational readiness. Interested parties must ensure their proposed services meet all technical and regulatory requirements for military-grade marine window packaging, including proper preservation techniques to prevent corrosion or damage during transit and storage. The solicitation is accessible via the DIBBS system under reference number SPE7L226T0579.
Packaging and Labeling Services

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 337920
New
DIBBS
Marine Window Manufacturing and SupplyThe contract requires the manufacture, testing, packaging, and delivery of marine-grade windows that meet stringent technical specifications set by the Defense Logistics Agency, including compliance with hazardous material restrictions and federal labeling requirements. The work must be performed to ensure durability and performance in harsh maritime environments, with all products undergoing rigorous quality control procedures before shipment. The solicitation is structured as a subcontract with a response deadline of August 6, 2026, and falls under NAICS code 337920 for other transportation equipment manufacturing. The place of performance is specified as New Cumberland, Pennsylvania, with the Department of Defense’s Land Supplier Operations Wheeled Vehicles agency overseeing the requirement. All deliverables must align with federal standards and DLA technical directives, and failure to meet these criteria will result in non-compliance and potential contract failure.
Blind and Shade Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
WINDOW, MARINE
Solicitation # SPE7L2-26-T-0579
The contract pertains to the procurement of seven marine windows identified by NSN 2040-01-312-8602 and part number KS-23560-8 from CORNELL-CARR CO., INC., with a unit price of $7.00 per unit and a total contract value of $49.00. Delivery is required within 69 days from contract award, with delivery terms set as FOB origin and inspection and acceptance occurring at the destination. The supply must be packaged according to ASTM D3951, with packaging and labeling compliant with MIL-STD-129, and palletization must follow DLA’s RP001 packaging requirements, which take precedence over any conflicting standards. The use of ozone-depleting substances is strictly prohibited, with specific exceptions allowed for functional mercury in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA; any mercury-containing portable devices must be shockproof and feature a secondary containment barrier as per NAVSEA 5100-003D. The contract incorporates all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which override local standards. The item is classified as a critical application item, and all government identification must be removed from non-accepted supplies. Delivery must be made to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA, with the original required delivery date of December 25, 2024, and a need ship date of February 4, 2025. The solicitation number is SPE7L2-26-T-0579, issued by the Department of Defense’s Land Supplier Operations Wheeled Vehicles, with Shaun Sehgal designated as the primary point of contact.
Hardware Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (DFARS 252.204-7012)This contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect Covered Defense Information (CDI) on all systems processing, storing, or transmitting contract-related data. The requirement stems from DFARS 252.204-7012, mandating compliance with federal cybersecurity standards to ensure the confidentiality and integrity of sensitive defense information. The work is tied to a subcontract under the Department of Defense, with performance centered in New Cumberland, Pennsylvania, 17070-5002, and falls under NAICS code 541512 for computer systems design services. All necessary controls must be fully operational and documented by the response deadline of August 3, 2026, with continuous adherence expected throughout the contract lifecycle. Compliance is non-negotiable and directly tied to the ability to handle classified or controlled unclassified information under DoD contracts.
Computer Systems Design Services

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 323111
New
DIBBS
MIL-STD-129 Labeling & Barcoding ServicesThe contract requires the application of standardized MIL-STD-129 labels and 2D Data Matrix barcodes on unit packs and shipping containers to support Department of Defense logistics tracking and acceptance procedures. This work is critical for ensuring accurate identification, traceability, and inventory management of military supplies throughout the supply chain. All labeling must strictly adhere to MIL-STD-129 specifications, including data content, formatting, barcode symbology, and placement to guarantee compatibility with DoD automated systems and scanning infrastructure. The contract is classified as a subcontract under NAICS code 323111, with a response deadline of August 3, 2026, and performance centered at New Cumberland, Pennsylvania, with ZIP code 17070-5002. The contracting activity falls under the Land Supplier Ops Wheeled Vehicles office of the Department of Defense, indicating this effort supports the logistics needs of ground vehicle systems and associated equipment. Compliance with labeling standards is mandatory for contract acceptance, and failure to meet technical requirements may result in rejection of delivered items and non-payment.
Commercial Printing (except Screen and Books)

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 493190
New
DIBBS
MIL-STD-2073-1E Packaging & Preservation ServicesThe contract requires adherence to Military Standard MIL-STD-2073-1E for the packaging and preservation of components using approved corrosion-inhibiting materials and methods to ensure durability during long-term storage and transport. All work must comply with strict defense-grade protocols to maintain component integrity under extreme environmental conditions, emphasizing rust prevention, moisture control, and secure encapsulation techniques validated by military specifications. The performance location is designated as New Cumberland, PA, with a zip code of 17070-5002, and the contract type is a subcontract under the Department of Defense’s Land Supplier Operations Wheeled Vehicles organization. The NAICS code 493190 indicates that the work falls under Other Warehousing and Storage services, and the solicitation opened on July 23, 2026, with a firm deadline for responses on August 3, 2026. All participants must ensure full compliance with military packaging standards without deviation, and deliverables are expected to meet stringent quality and documentation requirements for government acceptance.
Other Warehousing and Storage

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & SDS ManagementThe contract requires the authoring, submission, and ongoing maintenance of Safety Data Sheets for hazardous materials used in packaging or component preservation, ensuring full compliance with OSHA and Department of Defense regulations. All SDS must be accurately prepared, regularly updated, and properly submitted to meet federal safety and documentation standards, with a focus on materials integral to military vehicle components and their preservation. The work is tied to operations at the New Cumberland location with a zip code of 17070-5002, and the contractor must maintain rigorous adherence to federal hazardous materials handling protocols. This is a subcontract solicitation under NAICS code 541620, with a response deadline of August 3, 2026, and was posted on July 23, 2026. The contracting entity is the Department of Defense under the Land Supplier Operations Wheeled Vehicles organization, indicating the work supports defense logistics and supply chain integrity. While no specific set-aside details are provided, the requirement demands specialized technical expertise in chemical safety documentation and regulatory compliance within a defense contracting environment. All deliverables must align precisely with DoD and OSHA mandates to ensure the safe handling, storage, and transport of hazardous substances in military contexts.
Environmental Consulting Services

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 332999
New
DIBBS
Precision Mechanical Component SupplyThe contract pertains to the supply of an adjusting device identified by NSN 3040016631920, a precision mechanical component essential for military wheeled vehicles. This item must be manufactured and delivered in full compliance with stringent technical specifications and packaging standards to ensure operational reliability in demanding defense environments. The component is critical for the functionality and maintenance of vehicle systems, requiring exact tolerances and quality controls throughout production and assembly. The solicitation is issued as a subcontract under NAICS code 332999, with a response deadline of August 3, 2026, and a posting date of July 23, 2026. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the delivered items must be shipped and accepted. The contracting entity is the Land Supplier Operations for Wheeled Vehicles under the Department of Defense, which oversees the logistics and procurement of parts for ground vehicle fleets. All submissions must meet the requirements outlined in the official RFQ accessible via the provided DIBBS link, ensuring adherence to federal defense supply protocols.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 336370
New
DIBBS
Supply of Universal Joint Yokes for Vehicular ApplicationsThe contract seeks the supply of 21 universal joint yokes designed for integration into vehicular drive shaft assemblies to enable the transmission of torque between rotating shafts operating at variable angles. These components are critical for reliable power transfer in military-grade wheeled vehicles and must meet stringent performance and durability standards expected in rugged operational environments. The procurement is classified as a subcontract under NAICS code 336370, indicating it falls within the automotive parts manufacturing sector, and is managed by the Department of Defense through its Land Supplier Operations branch. The solicitation was posted on July 23, 2026, with a firm response deadline of August 3, 2026. Performance of the contract is obligated to take place in Texarkana, Texas, with a ZIP code of 75507-5000. Although no set-aside classification or point of contact information is provided, the contract is accessible via the DIBBS platform for qualified suppliers to review requirements and submit proposals. All units delivered must comply with technical specifications to ensure seamless compatibility and operational safety within deployed vehicular systems.
Motor Vehicle Metal Stamping

POSTED

6 days ago

DEADLINE

in 5 days
View Details