Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

STRAP, RETAINING

Active
SPE7L1-26-T-912KFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one retaining strap identified by NSN 5340-01-700-7621 under solicitation SPE7L1-26-T-912K, issued by the Department of Defense through the Land Supply Chain. Delivery is required within five days of award at FOB origin, with inspection and acceptance occurring at the destination, specifically the Fleet Readiness Center Southeast in Jacksonville, Florida. Strict packaging requirements mandated by MIL-STD-2073-1E and DLA packaging standards must be followed, including compliance with MIL-STD-129 for marking and adherence to specified packaging codes and methods. Ozone-depleting chemicals are strictly prohibited, and any substitutes must be approved unless already authorized by specification. The item must be shipped via the fastest traceable means, with parcel post explicitly forbidden. Technical compliance is governed by multiple reference drawings dated April 10, 2022, and the supplier must adhere to the Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and the handling of covered defense information. Full and open competition applies, with no set-aside designation. The contract enforces a zero variance in quantity, and the required delivery date is August 5, 2026. All documentation and compliance are tied to the DLA Master List of Technical and Quality Requirements, and the supplier must be prepared to support government audit and data tracking needs, including designated points of contact and supply chain identifiers.

General Info

Procure one retaining strap, NSN 5340-01-700-7621, deliver by August 5, 2026, meet MIL-STD and CMMC Level 2 requirements.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

NAVAL AIR STATION, JACKSONVILLE, FL, 32212-0016, US

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-912K.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
MICHAEL NORDAHL
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STRAP,RETAINING
STRAP,RETAINING
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
FULL AND OPEN COMPETITION APPLY
RD002, COVERED DEFENSE INFORMATION APPLIES
TDP Rev A Gen 1 IAW BASIC DRAWING NR 14083 115-174-0243 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0244 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0245 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0247 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0248 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0249
SPE7L1-26-T-912K
SECTION B
REVISION NR DTD 04/10/2022
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0250 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0251 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0252 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0253 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0254 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0255 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0256 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0257 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0258 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0259 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0261 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0262 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 14083 115-174-0263 REVISION NR DTD 04/10/2022 PART PIECE NUMBER:
SPE7L1-26-T-912K
SECTION B
PR: 7017727059 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017727059 0001 EA 1.000
NSN/MATERIAL:5340017007621
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N65886
FLEET READINESS CENTER SOUTHEAST
BLDG 101 NADEP N65886
NAVAL AIR STATION
JACKSONVILLE FL 32212-0016
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N65886
FLEET READINESS CENTER SOUTHEAST
109 YORKTOWN AVE
AVIATION RETAIL STOCK NAS
JACKSONVILLE FL 32212-0103
US
M/F: (TCN) N658866212A001
RDD: 212
PROJ: 705 TP 1
SPE7L1-26-T-912K
SECTION B
PR: 7017727059 PRLI: 0001 CONT’D
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 9B ADV: 24 FC: PS
Need Ship Date:00/00/0000 Original Required Delivery Date:08/05/2026
SPE7L1-26-T-912K NSN/Part Number: 5340-01-700-7621 Quantity: 1 EA Purchase Request: 7017727059QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-11RF
This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A7-26-T-611K
The contract specifies the procurement of 62 boxes of blind rivets with NSN/Part Number 5320-01-330-2847 under solicitation SPE4A7-26-T-611K, with a response deadline of August 12, 2026, and a delivery requirement within 171 days after award. The item is designated as a critical item requiring origin inspection, and all supplies must comply with detailed technical and quality requirements indexed by R or I numbers referenced in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to DLA standards, and documentation for source approval is mandatory. Government identification must be removed from non-accepted supplies, and inspection and acceptance will occur at the origin. Covered defense information is potentially applicable, and tailored higher-level quality requirements govern both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, with Brad Ingram of the Department of Defense, ASC Supplier Operations AE and AF Division, serving as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, MACHINE THREAD
Solicitation # SPE4A7-26-T-610X
The U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking quotes for 1,854 machine thread bushings identified by NSN 5365012707546, to be delivered to DLA Distribution Red River within 128 days of award. This procurement is conducted under solicitation SPE4A726T610X, which is exclusively available electronically via the SAM.gov platform, with no hard copies provided. Digitized drawings and military specifications may be accessed online. The solicitation is set aside for SBA-certified Women-Owned Small Businesses under the WOSB Program, and only responsible sources meeting this eligibility criterion may submit responses. All quotes must be submitted electronically through the designated portal prior to the deadline of August 12, 2026. Questions concerning the solicitation should be directed to the designated point of contact via email, as specified in the official document accessible through the provided UI link or the DIBBS website using the solicitation number.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PLUG, PROTECTIVE, DUST A
Solicitation # SPE7L1-26-T-910W
The contract is for a protective dust and moisture seal plug identified by NSN 5340-01-357-7621, with a quantity of one unit, to be delivered within five days of award under purchase request 7017720090. The item is procured through a federal solicitation issued by the Department of Defense’s Land Supply Chain, with the solicitation number SPE7L1-26-T-910W, posted on August 4, 2026, and response deadline set for August 17, 2026. The place of performance is Fort Carson, Colorado, with the NAICS code 332510 indicating manufacturing within the engine and turbine manufacturing sector. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision depends on whether the acquisition is simplified or large, with the effective revision tied to the solicitation issue date, award date, or any amendment date. The supplier, KHD Deutz of America Corp in Norcross, Georgia, must ensure compliance with DLA packaging standards and remove any government identification from non-accepted supplies. The primary point of contact for the solicitation is Michael Nordahl, reachable via email and phone provided in the contract data.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A6-26-T-12AL
The contract specifies the procurement of five SPACER, PLATE units with NSN 5365-01-479-8435 under solicitation SPE4A6-26-T-12AL, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 171 days from the award date, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E using packaging method 33, dry press, with no cushioning materials. Marking follows MIL-STD-129 with no special coding, and palletization adheres to DLA’s packaging requirements. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping must comply with DLA procedural notes C19 and C20. The original required delivery date was January 17, 2027, with a needed ship date of January 31, 2027. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. The unit of issue is each (EA), priced at $5.00 per unit for a total of $25.00. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless the contract specifies otherwise. Removal of government identification from non-accepted supplies is required per RQ011, and all documentation must align with the authorized DLA purchasing and unit of issue standards.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SAFETY CABLE KIT
Solicitation # SPE4A7-26-T-614C
The Safety Cable Kit is procured under NSN 5342-01-625-3947 with a total quantity of 16 packaging groups, where each packaging group contains 50 individual kits, resulting in 800 total kits. Each kit consists of a cable and a magazine, and each magazine is preloaded with 50 ferrules compliant with specification AS3510-0312K. The unit of issue was changed to packaging group (PG) on April 1, 2022, and all items must adhere to DLA packaging requirements for procurement. Physical identification and bare item marking are mandated, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances allowed unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the manufacturer’s origin, and the item is procured competitively under a military specification. The contract solicitation number is SPE4A7-26-T-614C, with a response deadline of August 12, 2026, a posting date of August 4, 2026, and a delivery requirement 171 days after award. The point of contact is Jamiah Sutton of the Department of Defense’s ASC Supplier Oper AE and AF Division, and the place of performance is New Cumberland, Pennsylvania, with NAICS code 332510 applicable.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-612E
The contract pertains to the procurement of SHIM with NSN 5365-01-472-5933, totaling 117 units, under solicitation number SPE4A7-26-T-612E, which was posted on August 4, 2026, with responses due by August 12, 2026. The item is subject to strict export control regulations under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons, regardless of location, requires prior authorization from the U.S. Department of State or Department of Commerce. Foreign nationals employed by U.S. companies or subsidiaries are equally restricted, and compliance with DFARS 252.225-7048 is mandatory. Distribution is limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD training on handling export-controlled data, and have successfully submitted the DLA Export-Controlled Technical Data Questionnaire, all while receiving formal approval from the DLA controlling authority. The place of performance is specified as New Cumberland, Pennsylvania, with a delivery timeline of 171 days after contract award. The contracting office is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact Brandon Smith reachable via email and phone provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHACKLE
Solicitation # SPE4A7-26-T-614L
This contract, identified by solicitation number SPE4A7-26-T-614L, is for the procurement of 99 units of a shackle with NSN 4030-01-657-5940 and part number 10823-17279 from Fastenal Company Div Oshk, CAGE code 3SPK0. The item must be delivered FOB origin with no variance in quantity and is subject to destination inspection and acceptance. The required delivery date is December 4, 2026, with an allowable delivery window of 171 days, and the shipment must be prepared by January 31, 2027. Packaging and labeling must comply strictly with MIL-STD-129 and ASTM D3951, with packaging requirements subordinate to the DLA Master List of Technical and Quality Requirements. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001). All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List in effect on the solicitation issue date, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are deemed major. The unit of issue is each (EA), priced at $99.00, for a total value of $9,801. The delivery destination is DLA Distribution Barstow, Central Receiving Warehouse 7, with specific contact details provided. Transportation and shipping instructions must follow DLAD Proc Notes C19 and C20. The contract includes mandatory physical marking of the item as specified under RQ017 and requires removal of government identification from non-accepted supplies as per RQ011.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A7-26-T-614T
The contract is for 5,265 units of a BUSHING, SLEEVE with part number 5365-01-140-4534, issued under solicitation SPE4A7-26-T-614T as a Women-Owned Small Business Set-Aside with a NAICS code of 332510. The item includes technical data subject to export controls under either ITAR or EAR, requiring strict compliance with DFARS 252.225-7048 and prohibiting unauthorized export or disclosure to foreign persons, regardless of location. Access to this controlled data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally authorized by DLA. The delivery deadline is 170 days after order award, with performance to occur in Texarkana, Texas. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV under point of contact Wendy Jones. Only CMMC Level 2 certified C3PAOs are eligible to perform assessments related to this requirement, and physical identification and bare item marking must comply with RQ017 standards.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L4-26-T-5974
The contract pertains to the procurement of one bracket, vehicular component, identified by NSN 2590-01-559-1306 and part number 6433083-01M1, to be supplied by BAE Systems Land & Armaments L.P. or AMZ Alabama Inc. Delivery is required within five days of award, with shipment FOB origin and no variance in quantity allowed. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while adhering strictly to DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Packaging and labeling must follow MIL-STD-129 and RP001, with palletization requirements enforced. The item is prohibited from containing any Class I ozone-depleting chemicals, and any substitute chemicals must be approved unless explicitly authorized by specifications. The delivery destination is in Kaiserslautern, Germany, with the shipment marked for SSA Building 2371 and designated under RDD 999/NMCS procedures. Transportation details reference DLAD PROC NOTE C19 and C20. The contract is tied to solicitation SPE7L4-26-T-5974, with an original required delivery date of August 4, 2026, and all government-specific codes and identifiers are included for administrative and logistical tracking.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
PIN, SHOULDER, HEADED
Solicitation # SPE4A7-26-T-611F
The contract pertains to the procurement of 17 units of PIN, SHOULDER, HEADED with NSN 5315-01-291-7247 under solicitation SPE4A7-26-T-611F, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The delivery is required within 171 days after award, and the response deadline for submissions is August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Specific documentation and procedural obligations include compliance with DLA packaging standards, removal of government identification from non-accepted supplies, and physical identification or bare item marking requirements. Covered defense information may apply, and source approval documentation must be submitted as required. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Brad Ingram, reachable via email and phone provided. The NAICS code is 332510, indicating the contract falls under forging and stamping operations within the defense procurement framework.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 336390
New
DIBBS
OIL FILTER CUTTER
Solicitation # SPE7L1-26-T-914K
The contract is for the procurement of one oil filter cutter with NSN 2940-01-536-9281 and part number 175-7546, supplied by approved vendors including Caterpillar Inc, Finning UK Ltd, and Hastings Deering (Aust) Pty Ltd. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must adhere strictly to MIL-STD-129 and RP001 DLA Packaging Requirements, with unit of issue as a single unit and no tolerance for quantity variance. The delivery is FOB origin with a 20-day lead time, and inspection and acceptance occur at the destination. The shipment must be dispatched using the fastest traceable means, excluding parcel post, with delivery addressed to W8T2 TX ARNG FMS 20 at 301 East Regis Street Suite 1122, Lubbock TX 79403-1122. The RDD is 777, and the shipment must be marked accordingly. The contract reference is SPE7L1-26-T-914K, with a required delivery date of July 30, 2026. The solicitation was posted on August 4, 2026, and responses are due by August 17, 2026. The contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the primary point of contact. All items must be properly labeled and palletized per DLA specifications, and government identification must be removed from non-accepted supplies. Configuration changes require formal engineering change proposals or variance requests.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
COVER, PROTECTIVE, DU
Solicitation # SPE7L1-26-T-914F
The contract pertains to the procurement of three protective dust and moisture seals, identified by NSN 5340-01-572-0086 and part number 780-518-15SG6-WS, manufactured by Glenair Inc. These items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, marking codes, and palletization aligned with DLA packaging guidelines. The supplies are to be delivered FOB destination within 20 days of contract award, with zero variance permitted in quantity, and inspection and acceptance both occurring at the destination. The delivery address is MALS-12 at MCAS Iwakuni, Japan, with a parcel post address for FPO AP 96310-7161, and transportation logistics reference DLA procedural notes C19 and C20. The requirement is part of solicitation SPE7L1-26-T-914F, posted August 4, 2026, with responses due by August 17, 2026, and the original required delivery date set for July 30, 2026. All documentation, including source approval requests and hazardous material handling, must satisfy related DLA clauses, and the unit of issue is each, priced at $3.00 per unit for a total of $9.00.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7L1-26-Q-1439
The procurement is for 69 units of a metal tube assembly identified by NSN 4710016759509, to be delivered to W1A8 DLA DISTRIBUTION within 246 days after award. This is a source-controlled item governed by a specific drawing, with only the approved source 21392 P5574-2 eligible to supply the component. The solicitation, numbered SPE7L1239, is issued as a combined RFQ with a Small Business Set Aside designation, meaning only small businesses can compete. It is classified under NAICS code 326122 and managed by the DLA Land and Maritime office in Columbus, Ohio. All quotes must strictly conform to the technical requirements of the referenced drawing, and digitized versions of drawings and military specifications are available electronically for retrieval. Quotes may be submitted online only; hard copies are not accepted and must be received by the deadline of August 13, 2026. Interested parties are directed to the SAM.gov link for the full solicitation and must direct inquiries via email to the designated buyer, as no phone or in-person contact options are provided.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333613
New
DIBBS
CAM, CONTROL
Solicitation # SPE7L1-26-T-913C
This contract issued by the Department of Defense through the Land Supply Chain under solicitation SPE7L1-26-T-913C seeks one unit of NSN 3040-01-628-1622, identified as W S DARLEY & CO P/N X8102, under the CAM,CONTROL designation. The item must be delivered within five days of award, FOB origin, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and codes, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and the shipment is designated as RDD 999/NMCS with transportation governed by DLAD PROC NOTE C19 and C20. The delivery destination is the Reparable Issue Point at Camp Kinser, with distribution managed through M20220. The required delivery date is August 3, 2026, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, applicable based on acquisition size and amendment dates. The unit of issue is each (EA), and the contract is classified under NAICS code 333613 with no set-aside designation. Primary point of contact is Kristina Derry, reachable at the provided phone and email.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333618
New
DIBBS
RADIATOR, ENGINE COO
Solicitation # SPE7L1-26-T-915A
This contract is for the procurement of five engine radiator units identified by NSN 2930-01-709-2109 and part number 2604117C92, with a unit price of $5.00 and a total contract value of $25.00. Delivery is required within 20 days from the date of award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the origin point, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 without special codes. The item must not contain any Class I ozone-depleting chemicals, and mercury or mercury-containing compounds are prohibited unless specifically exempted for approved applications such as certain batteries, lighting, instruments, or chemical reagents as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Substitute chemicals require prior approval unless authorized by the specification. The end user is the Jordan Armed Forces, with freight shipping directed through Serra International Inc. in Newark, New Jersey, and the order is managed under the Defense Logistics Agency using the unit of issue EA. The solicitation number is SPE7L1-26-T-915A, with a required delivery date of August 4, 2026, and the contract falls under NAICS code 333618 for heating equipment manufacturing.
Other Engine Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-913T
The contract specifies the procurement of a gasket with NSN 5330-00-391-8381 and part number N0900367 from LESLIE CONTROLS, INC., with a quantity of two units to be delivered within 20 days of contract award. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with DLA’s packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including use of a medium duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, particularly for direct vendor delivery, foreign military sales, and stock shipments. Marking must follow MIL-STD-129 with no special labeling required. The gasket must not contain asbestos as defined by FED-STD-313, and mercury or mercury-containing compounds are strictly prohibited unless exempted for specific functional uses such as batteries, fluorescent lights, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA; any permitted mercury-containing devices must have shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Packaging and palletization must adhere to DLA standards, and hazardous material shipping details require use of traceable freight services only—parcel post is prohibited—with the delivery address designated to the Naval Computer and Telecommunications Station Cutler in Maine. The contract is governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and the applicable revision is controlled by the solicitation issue date. The solicitation number is SPE7L1-26-T-913T, with a response deadline of August 17, 2026, and the original required delivery date is July 30, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L1-26-T-913F
This contract issued by the Department of Defense through the Defense Logistics Agency specifies the procurement of one vehicular bracket, part number 402/H2230 with NSN 2590-01-712-3185, under solicitation SPE7L1-26-T-913F. The item must be delivered within five days of contract award with no tolerance for quantity variance, shipped FOB origin, and inspected and accepted at the destination. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and palletization per DLA’s packaging requirements. The item must be marked with the provided special marking code and shipped via traceable freight methods, excluding parcel post, to the designated government freight address in Huntsville, Alabama. The contract strictly prohibits the use of Class I ozone-depleting chemicals in any form and requires any substitute materials to be submitted for approval unless explicitly authorized by the specification. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision controls tied to the solicitation or award date depending on the acquisition size. The unit of issue is established per DoD standards, and the item is designated for government use with specific identification codes including IPD, DIC, and project references. The required delivery date is August 3, 2026, and the contract’s point of contact is Kristina Derry of the Land Supply Chain organization.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
CYLINDER ASSEMBLY, ACTU
Solicitation # SPE7L1-26-T-912N
The contract pertains to the procurement of one cylinder assembly, actuating, linear, identified by NSN 3040-01-651-0388 and part number AVP-0.75X2.25-R, with a quantity of one unit. Delivery is required within ten days from the contract award, with delivery terms set at FOB origin and no quantity variance permitted. Inspection and acceptance both occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including specific packaging methods, materials, and container specifications. Marking must adhere to MIL-STD-129 with no special marking required. The item is subject to DLA's Packaging Requirements for Procurement and palletization standards, with shipments directed to the Distribution Management Office at Camp Kinser, Japan. Transportation and freight details reference specific DLA procedural notes, and the item is marked for delivery to MWSS 172. The solicitation number is SPE7L1-26-T-912N, with a response deadline of August 17, 2026, and the original required delivery date is July 31, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced under R and I numbering, with the applicable revision tied to the solicitation or award date depending on acquisition size. The contracting agency is the Department of Defense under the Land Supply Chain, and the point of contact is Kristina Derry.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332119
New
DIBBS
SPACER, RING
Solicitation # SPE7L1-26-T-910S
The contract pertains to the procurement of 1,220 units of a spacer ring identified by NSN 5365-15-120-2240 and part number 60154625, supplied by IVECO DEFENCE VEHICLES S.P.A. The item is classified as a commercial item and must comply with technical and quality requirements referenced from the DLA Master List, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances unless otherwise stated. Attributes are assigned verification levels or AQLs based on criticality, with unspecified attributes treated as major. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special markings, and palletization in line with DLA standards. Delivery is FOB origin with a 171-day lead time, inspection and acceptance occurring at the destination. The unit of issue is each, with a total price of $1,220.000. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with the original required delivery date set for May 12, 2027, and a need ship date of January 31, 2027. Transportation protocols and freight details are governed by DLA procedural notes C19 and C20. The solicitation was issued under SPE7L1-26-T-910S, with the response deadline on August 12, 2026, and falls under NAICS code 332119.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-911E
The contract pertains to the procurement of one unit of a COVER, ACCESS item identified by NSN 5340-01-260-9890, with a delivery requirement of 10 days after award. The solicitation, issued under number SPE7L1-26-T-911E, is governed by DLA packaging and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with compliance dictated by the revision in effect on the solicitation issue date or award date depending on acquisition size. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, or corresponding AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Zero non-conformances are required in sampled lots unless otherwise stated, and manufacturers may choose attribute or variable inspection methods under MIL-STD-1916. This is a PRI QML-restricted item, limiting award exclusively to accredited manufacturers or distributors listed on the current PRI QML, with distributors required to offer products from accredited manufacturers. Prior to award, the buyer must verify the vendor’s accreditation status and retain a dated copy of the PRI QML in the contract file. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-912R
This contract pertains to the procurement of a gasket identified by NSN 5330-01-696-6243 and part number 11B4600146-3, with a single unit requirement to be delivered within ten days of contract award. The item must comply with strict packaging standards, including sealing in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, due to the susceptibility of related materials to UV degradation. All packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special markings required. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item must be shipped to a U.S. Army facility in Powidz, Poland. The contract prohibits the use of Class I ozone-depleting chemicals in any component, overriding any conflicting specification but maintaining all product performance requirements. Configuration changes or deviations require formal approval via an Engineering Change Proposal, and a Certificate of Conformance is authorized unless specifically withheld. The technical specification referenced is TDP Rev A Gen 1, dated September 15, 2021, with a revision effective July 1, 2024. All requirements are governed by the DLA Master List of Technical and Quality Requirements, and the solicitation falls under full and open competition with no set-aside. The designated point of contact is Kristina Derry at the Defense Logistics Agency, with the solicitation issued under SPE7L1-26-T-912R, and the original required delivery date set for July 31, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details