Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

STRAP, WEBBING

Active
SPE4A1-26-T-2503Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of two units of webbing strap with NSN 5340015771775 and part number CA78732-001, manufactured by MOOG INC and THALES USA, INC. Delivery is required within 311 days, with shipment FOB origin and final delivery to the designated receiving warehouse in Tracy, California. The item must comply with DLA packaging requirements per MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, and must be marked in accordance with MIL-STD-129 without special marking codes. Sampling and inspection follow zero-defect acceptance criteria under MIL-STD-1916 or a comparable zero-based plan, with undefined attributes treated as major and verification levels strictly aligned to AQL standards. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances unless otherwise amended. The contract enforces strict quantity adherence with no variance allowed, and all packaging and palletization must conform to DLA guidelines as referenced in RP001. The solicitation number is SPE4A1-26-T-2503, with a response deadline in August 2026 and a required delivery date of June 15, 2027. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document, with revisions controlled by the solicitation issue or award date depending on acquisition size.

General Info

Two webbing straps ordered, FOB origin, strict DLA packaging, zero-defect inspection, delivery to Tracy CA by June 15, 2027.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A1-26-T-2503.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Scott Brunner
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STRAP,WEBBING
STRAP,WEBBING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MOOG INC 19156 P/N CA78732-001
THALES USA, INC. 65597 P/N CA78732-001
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017697494 0001 EA 2.000
NSN/MATERIAL:5340015771775
DELIVERY (IN DAYS):0311
DELIVER FOB: ORIGIN
SPE4A1-26-T-2503
SECTION B
PR: 7017697494 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:A1 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:06/15/2027 Original Required Delivery Date:06/15/2027
SPE4A1-26-T-2503 NSN/Part Number: 5340-01-577-1775 Quantity: 2 EA Purchase Request: 7017697494QTY: 2 Delivery: 311 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
DISK, SOLID, PLAIN
Solicitation # SPE7L1-26-T-897Q
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-900R
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
HOOK, BOAT
Solicitation # SPE7M4-26-T-293X
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
PLUG, PROTECTIVE, DUST A
Solicitation # SPE7L1-26-T-897U
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
LEAF, BUTT HINGE
Solicitation # SPE7L1-26-T-894E
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE7M2-26-T-5810
NUCLEAR REACTOR PROGRAM

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-901F
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-591P
The contract specifies the procurement of 430 units of a spacer sleeve with NSN 5365-01-051-6671 under solicitation SPE4A7-26-T-591P, issued as a total small business set-aside with NAICS code 332510. Delivery is due within 241 days of award, FOB origin, with no variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including preservative method 33, drying, preservative material 49, and wrapping with GB material, all packaged in unit container E5 with OPI marking and intermediate container E5, labeled with pack code U. Marking follows MIL-STD-129 with no special codes required. All packaging and palletization adhere to DLA’s RP001 requirements, and the shipment must be sent to the designated delivery address at Hill Air Force Base, Utah. The component is identified as a critical application item with approved part numbers from Rolls-Royce Solutions America Inc and Federal-Mogul Corporation. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional applications like batteries, fluorescent lights, sensors, weapon systems, and chemical reagents specified by NAVSEA; portable devices containing mercury must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in samples unless otherwise stated, and attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions effective as of the solicitation issue date for simplified acquisitions. The contract includes transportation guidelines from DLAD Proc Notes C19 and C20 and is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Richard Ellery as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A6-26-T-10PD
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
DIAPHRAGM ASSEMBLY,
Solicitation # SPE7M4-26-T-294G
The contract pertains to the supply of a DIAPHRAGM ASSEMBLY with part number H73380-01-2 and NSN 2040014542762, under solicitation SPE7M4-26-T-294G, which is a total small business set-aside. The item must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including mandatory physical identification and bare item marking, contractor retention of supply chain traceability documentation per DLA Procurement Note C03, and adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. The contract strictly prohibits the use of ozone-depleting chemicals and mercury or mercury-containing compounds, except in specific approved applications such as batteries, fluorescent lights, sensors, or instruments specified by NAVSEA, with portable devices requiring shock-proof construction and secondary containment. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. The item is a restricted source requiring government engineering approval. Two units are to be delivered FOB origin within 315 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The delivery deadline is June 22, 2027, with no variance allowed in quantity. All packaging and palletization must conform to DLA packaging standards, and transportation follows DLA Procurement Notes C19 and C20. The contracting office is the Department of Defense’s Fluid Handling Division, with primary point of contact Rory O’Reilly.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
PIN, TAPERED, PLAIN
Solicitation # SPE4A6-26-T-10VH
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-10WR
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A1-26-T-2502
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
VALVE, FUEL SYSTEM
Solicitation # SPE4A1-26-T-2500
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A1-26-T-2501
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A1-26-T-2498
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, AIRFRA
Solicitation # SPE4A1-26-T-2499
Ball and Roller Bearing Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 561910
New
DIBBS
Packaging and Labeling Compliance ServicesThe contract requires the provision of comprehensive packaging and labeling services that strictly adhere to DLA RP001 and OSHA 29 CFR 1910.1200 standards, ensuring full compliance with hazardous communication requirements. Services include repackaging of materials, application of HazCom-compliant labels, and seamless integration with established quality inspection protocols to maintain product integrity and regulatory adherence throughout the process. The work is centered at Robins Air Force Base, Georgia, with the contractor responsible for coordinating all activities to meet the specified technical and safety benchmarks. This is a subcontract under NAICS code 561910, issued by the Aviation Supply Chain within the Department of Defense. The solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026. All offerings must align with the operational environment at the designated place of performance and incorporate rigorous quality control measures. The contract emphasizes precision in labeling, safety compliance, and alignment with military logistics protocols, requiring vendors to demonstrate proven capability in handling regulated materials under federal standards.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 483111
New
DIBBS
Domestic and International Logistics / Transportation SupportThe contract seeks providers to deliver comprehensive domestic and international logistics and transportation services, with a core focus on FOB-origin coordination and the proper submission of ocean bills of lading to ensure seamless shipment tracking and documentation. Compliance with U.S.-flag vessel requirements mandated by the Buy American Act is a critical component, meaning all ocean freight must be carried on vessels flagged under the United States to meet federal procurement standards. The work will support military supply chain operations originating from Robins Air Force Base, Georgia, and will encompass both domestic movements and international shipments requiring adherence to strict regulatory frameworks. Subcontractors must be prepared to operate under the NAICS code 483111, which classifies this work under water transportation of freight, and will be responsible for end-to-end coordination of cargo from origin points through final delivery, ensuring all documentation, customs procedures, and compliance obligations are met without delay. The solicitation is open for responses until August 6, 2026, and is issued under the Department of Defense’s Aviation Supply Chain office, emphasizing the need for reliable, secure, and legally compliant logistics solutions to sustain defense-related operations. Failure to comply with U.S.-flag vessel mandates or to properly execute FOB-origin logistics will result in non-conformance and potential contract termination.
Deep Sea Freight Transportation

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
Threaded Insert (NSN 5305-01-678-6288, Part 114AS) Manufacturing and SupplyThe contract calls for the manufacture and delivery of threaded inserts identified as Part 114AS with the National Stock Number 5305-01-678-6288, requiring full compliance with military specifications including MIL-STD-1916 for quality assurance and DLA RP001 for packaging standards. All products must meet OSHA hazard communication requirements to ensure safe handling and documentation of chemical and material risks associated with production and use. The work is classified as a subcontract under NAICS code 332722, focused on screw machine products manufacturing, and performance is centered at Robins Air Force Base, Georgia, with a delivery destination code of 31098-1887. The solicitation was posted on July 29, 2026, and responses are due by August 6, 2026, with the contract managed under the Aviation Supply Chain division of the Department of Defense.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541211
New
DIBBS
Government Invoicing and WAWF ReportingThe contract requires submission of electronic invoices and receiving reports through the Wide Area WorkFlow system to comply with DFARS 252.232-7006, ensuring timely and accurate payment processing for the Department of Defense. All documentation must be transmitted electronically via WAWF as a mandatory condition for reimbursement under this subcontract agreement. The work is performance-based at Hill AFB, Utah, with the NAICS code 541211 indicating professional, scientific, and technical services related to accounting, bookkeeping, and financial reporting activities. The solicitation was posted on July 29, 2026, with a response deadline of August 10, 2026, and is managed by the Aviation Supply Chain under the Department of Defense. There is no specified set-aside classification, and the contract is classified as a subcontract, meaning the respondent will be fulfilling obligations under a prime contract rather than directly engaging with the government. Complete adherence to WAWF requirements and timely submission of invoices and receiving reports are critical to maintaining payment eligibility and contractual compliance.
Offices of Certified Public Accountants

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Safety DataThis contract requires strict adherence to mercury restrictions and mandates the provision of Safety Data Sheets in full compliance with 29 CFR 1910.1200 and NAVSEA 5100-003D for all hazardous materials used in containment processes. The work is scoped under a subcontract classified under NAICS code 541620 and is managed by the Department of Defense through the Aviation Supply Chain office, with performance specifically designated at Hill AFB, Utah, 84056-5734. All submissions must meet federal and naval safety standards for chemical hazard communication, ensuring that personnel and environmental protections are fully upheld. Responses are due by August 10, 2026, with the solicitation posted on July 29, 2026, leaving a twelve-day window for submissions, and all parties must demonstrate clear understanding and capability to implement these regulatory requirements without exception.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection ServicesThe contract requires the execution of rigorous quality assurance inspections on defense-grade hardware, adhering strictly to MIL-STD-1916 or ASQ H1331 sampling plans with defined acceptable quality levels: 0.1 for critical defects, 1.0 for major defects, and 4.0 for minor defects. These inspection standards ensure that all delivered hardware meets the high-integrity requirements necessary for military applications, with inspections conducted to assess conformance at every layer of production and assembly. The work is classified as a subcontract under NAICS code 541330 and is managed by the Department of Defense through the Aviation Supply Chain organization, with performance required at Hill Air Force Base, Utah, zip code 84056-5734. The solicitation, posted on July 29, 2026, with a response deadline of August 10, 2026, is aimed at securing qualified vendors capable of delivering precise, compliant inspection services under strict defense protocols.
Engineering Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and PalletizationThe contract requires precise packaging and palletization of precision washers in full compliance with Department of Defense standards including MIL-STD-129, ASTM D3951, and RP001, ensuring proper preservation, labeling, and GS1-128 barcoding throughout the process. All work must meet rigorous military specifications for durability, traceability, and uniformity to support logistics and distribution readiness. The packaging must be designed to protect components during storage and transit while enabling seamless scanning and inventory management through standardized barcoding protocols. Performance is to be conducted at Hill Air Force Base, Utah, with a response deadline of August 10, 2026, and the solicitation was posted on July 29, 2026. This is a subcontract opportunity under NAICS code 561910, issued by the Aviation Supply Chain within the Department of Defense. While no set-aside classification or point of contact is specified, the requirements emphasize strict adherence to military-grade packaging procedures to ensure compatibility with DoD supply chain systems.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 10 days
View Details