Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

STRAP, WEBBING

Active
SPE7LX-26-U-9350Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 29 units of webbing strap identified by NSN 5340-00-868-9610 under solicitation SPE7LX-26-U-9350, with a response deadline of August 24, 2026, and a delivery requirement of 115 days after award. The item falls under NAICS code 332510 and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. All supplies must comply with DLA packaging standards, and government identification must be removed from non-accepted items. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. This procurement is subject to full and open competition, and the technical data associated with the item is controlled under ITAR or EAR regulations, restricting export and disclosure to foreign persons without authorization. Access to such data is limited to contractors with approved U.S./Canada Joint Certification Program status, having completed mandatory DLA export control training and questionnaire, and received formal approval from DLA. The point of contact for inquiries is Theodore Misiolek, reachable via email or phone provided.

General Info

Procure 29 webbing straps under NSN 5340-00-868-9610, delivery in 115 days, ITAR/EAR controlled, DLA compliance required.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE7LX-26-U-9350 for Indefinite Delivery Contract

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STRAP,WEBBING
STRAP, WEBBING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RD002, COVERED DEFENSE INFORMATION APPLIES
FULL AND OPEN COMPETITION APPLY
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5340-00-868-9610 Quantity: 29 EA Purchase Request: 1000236980QTY: 29 Delivery: 115 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-14KH
The contract is for 1,261 units of a quick release pin with NSN 5315-00-904-1662, solicited under SPE4A6-26-T-14KH with a response deadline of August 17, 2026, and a delivery requirement within 103 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA standards, and items must be physically marked as required. Non-accepted supplies must have government identification removed, and all items are subject to export control under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. Inspection and acceptance occur at the origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is Hill AFB, Utah, and the contracting office is the ASC Commodities Division under the Department of Defense, with primary contact Ahoefa Simons De Fanti.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-635M
The item specified is a spacer ring with NSN 5365-00-340-5948, quantity 23 units, under purchase request 7016337117, with a delivery requirement of 54 days ADO. This item is associated with technical data subject to export control under either ITAR or EAR, meaning any disclosure or transfer of such data to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. The data is governed by DFARS 252.225-7048, and access is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DoD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A7-26-T-635M, posted on August 9, 2026, with a response deadline of August 17, 2026. The contracting activity is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with performance located in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Jamiah Sutton, reachable via email and phone provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
MOUNT, RESILIENT, GEN
Solicitation # SPE7L1-26-T-943Q
The contract is for two resilient general mounts identified by NSN 5340-01-501-4392, with a delivery requirement of 20 days after award. It is issued under solicitation number SPE7L1-26-T-943Q, posted on August 9, 2026, with responses due by August 20, 2026. Full and open competition applies, and the NAICS code is 332510 under the Department of Defense’s Land Supply Chain. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. Packaging must comply with DLA standards, government identification must be removed from non-accepted supplies, and configuration changes require formal engineering change proposals or variance requests. Export control regulations apply to technical data, making it subject to ITAR or EAR, with access restricted to contractors holding approved US/Canada Joint Certification Program status, having completed required DLA training, and received explicit authorization. The place of performance is Pearl Harbor, Hawaii, with Kristina Derry listed as the primary point of contact for inquiries.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
TURNBUCKLE BODY
Solicitation # SPE7L1-26-T-946C
The contract pertains to the procurement of five turnbuckle bodies with NSN/Part Number 5340-01-517-0385 under solicitation SPE7L1-26-T-946C, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within 165 days of award, and the item is subject to stringent cybersecurity compliance requirements including CMMC Level 2 certification for the assessing organization. Technical data associated with this item is classified as export-controlled under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring strict adherence to DFARS 252.225-7048. Access to this controlled data is limited strictly to DLA contractors who hold an approved U.S./Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled technical data, and have received formal approval from DLA to access the information. The contract is open for response until August 20, 2026, with performance to be delivered to New Cumberland, Pennsylvania, 17070-5002, and all inquiries should be directed to Isabelle Szulewski at the designated DLA point of contact.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7L1-26-T-944G
The contract is for the procurement of 250 mounting plates with NSN 5340-01-623-8342 under solicitation SPE7L1-26-T-944G, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. The delivery requirement is set for 165 days after award, and the response deadline for submissions is August 20, 2026, with the solicitation posted on August 9, 2026. All technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements accessible online, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The item must comply with MIL-STD-130N for identification marking of U.S. military property, and any government identification must be removed from non-accepted supplies. The NAICS code is 332510, and the place of performance is New Cumberland, Pennsylvania, with the primary point of contact being Michael Nordahl via email and phone provided. This procurement is open to federal suppliers under an unrestricted competition category.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CONN ROD RH HND SD
Solicitation # SPE7M4-26-T-327T
The contract pertains to the procurement of a right-hand connecting rod for a handle-side application, identified by part number 803-6397269 and NSN 2040014549209, with a quantity of 16 units to be delivered FOB origin within 165 days. All items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, enforcing zero non-conformances for acceptance unless otherwise stated. Attributes are classified with verification levels or AQLs, and unspecified features are treated as major. The product must be free of ozone-depleting chemicals and must not contain or come into direct contact with mercury or mercury compounds except for specific exempted applications like batteries, instruments, or sensors as defined by NAVSEA; portable mercury-containing devices must include a secondary containment and be shock-proof per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with unit packaging including preservative methods, no cushioning material, and defined container codes, while palletization follows DLA packaging guidelines. Marking is to be standard with no special codes applied, and delivery is directed to the DLA Distribution San Joaquin facility in Tracy, California. The contract requires full and open competition with no set-aside, and pricing is fixed at $16.00 per unit for a total value of $256. The solicitation, issued under contract number SPE7M4-26-T-327T, was posted on August 9, 2026, with responses due by August 20, 2026, and the original required delivery date is February 10, 2027, with a need ship date of February 2, 2027.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-943F
The contract pertains to the procurement of four CLAMP, LOOP units with NSN 5340-01-091-6833 under solicitation SPE7L1-26-T-943F, with a delivery requirement of five days after award. The technical data associated with this item is subject to stringent export controls under either ITAR or EAR, meaning any disclosure—whether to foreign persons within the United States or abroad—requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this data, and distribution is restricted exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by the DLA controlling authority. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is classified under NAICS code 332510. Performance is directed to Chambersburg, Pennsylvania, and all inquiries must be directed to Michael Nordahl at the provided DLA contact information.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, NUT AN
Solicitation # SPE7L4-26-T-6214
This contract specifies the procurement of 10 protective nut caps with NSN 5340-01-695-4518 and part number 4359775 for BAE Systems Land & Armaments L.P. under solicitation SPE7L4-26-T-6214, issued by the Department of Defense through DLA. The items must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R and I numbers, and packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, including MIL-STD-129 marking with no special marking codes. Delivery is required FOB origin within 165 days, with a specified ship date of February 2, 2027, and no tolerance for quantity variance. Inspection and acceptance occur at the destination, with packaging requiring unit containers coded D3, intermediate containers coded E5, and palletization in accordance with DLA requirements. The delivery address is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, and transportation logistics follow DLA procedure notes C19 and C20. The unit price is $10.00 per piece, totaling $100.00, with the purchase request number 7017776237 and unit of issue as each. The contract is managed by Anna-Rachelle Betts of LSO Combat Vehicles and Armament, with contact information provided for inquiries.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
SHIPPING AND STORAG
Solicitation # SPE8ED-26-T-1257
The contract pertains to the procurement of a single unit of an infrared viewer with part number CC-3917EK and NSN 8145-01-606-1140, awarded under solicitation SPE8ED-26-T-1257. Delivery is required within twenty days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, specifically at Camp Lejeune, North Carolina, and the item must be packaged per ASTM D3951 unless superseded by DLA Master List technical and quality requirements, which take precedence. Packaging and labeling must conform to MIL-STD-129, and palletization follows DLA’s RP001 procurement packaging standards. The item must be shipped via traceable means, explicitly prohibiting parcel post, with delivery directed to the Distribution Management Office at Building 1012, O Street Bay #8. The contractor must comply with all applicable technical and quality specifications referenced by R and I numbers from the DLA Master List, and documentation requirements for source approval and covered defense information are applicable. The contract stipulates that government identification must be removed from non-accepted supplies and data provided is proprietary or insufficient for competitive procurement, restricting full disclosure. The required delivery date is August 5, 2026, with a primary point of contact listed as Ogden Howard at DLA, and all logistics are tied to project TP 3 under the military freight designation M21625.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L4-26-U-1070
The contract pertains to the procurement of 33 CLAMP, LOOP units with NSN 5340-01-284-2451 under solicitation SPE7L4-26-U-1070, with a response deadline of August 24, 2026, and a delivery requirement of 116 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including to foreign national employees or subsidiaries of U.S. companies. Access to this controlled data is restricted to contractors who hold valid US/Canada Joint Certification Program certification, have completed required DLA export control training and questionnaire, and have received explicit approval from the DLA controlling authority. The acquiring organization is the Department of Defense through LSO Combat Vehicles and Armament, with Heather Kessler as the primary point of contact, and the procurement falls under NAICS code 332510 with no set-aside classification.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, SHAFT
Solicitation # SPE7L1-26-T-946R
The contract pertains to the procurement of a COLLAR, SHAFT with NSN 5340017206077, issued under solicitation SPE7L1-26-T-946R by the Department of Defense’s Land Supply Chain. A total of 18 units are required at a unit price of $18.00, with the delivery window set at 165 days and delivery terms designated as FOB origin. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking code applied. The product is classified as a critical application item, and no ozone-depleting chemicals may be used under any circumstance, overriding any conflicting specification provisions unless authorized substitutes receive prior approval. Packaging must adhere to DLA’s packaging requirements and palletization guidelines, with the consignment destined for the DLA Distribution facility at New Cumberland, Pennsylvania. Inspection and acceptance occur at destination, and quantity variance is strictly zero percent. The item is sourced exclusively from Vega Americas Inc under part numbers 2.44484 and KMB0556-180, and procurement must align with the designated DoD unit of issue. The original required delivery date is April 27, 2027, with a need ship date of February 2, 2027, and the contract was issued with a solicitation response deadline of August 20, 2026.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A6-26-T-14LH
The contract pertains to the procurement of 395 straight headless pins identified by NSN 5315-01-269-9299 under solicitation SPE4A6-26-T-14LH, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 155 days after award, and responses must be submitted by August 17, 2026. The item falls under NAICS code 332510 and is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. Cybersecurity compliance is mandated through CMMC Level 2 certification for third-party assessors, and packaging must adhere to DLA standards. Inspection and acceptance occur at the origin, and non-accepted supplies must have all government identification removed. Physical marking of the bare items is required, and export control regulations under ITAR or EAR apply to associated technical data, restricting access to contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization. The contract enforces tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, with additional provisions for the safeguarding of covered defense information. Technical data governing the item cannot be disclosed to foreign persons, including employees of U.S. companies or subsidiaries, without prior authorization from the Department of State or Commerce, in accordance with DFARS 252.225-7048. Access to controlled data is limited to contractors who have successfully completed the DLA Export-Controlled Technical Data Questionnaire and training via the designated DLA website. The place of performance is Tinker Air Force Base, Oklahoma, with Summer Allen as the primary point of contact for inquiries. The procurement is classified as federal and does not specify a set-aside type, and all documentation must be submitted via the DIBBS portal.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 334419
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE7LX-26-U-9349
The contract is for a branched wiring harness with part number 1972960 and NSN 6150013696087, procured under solicitation SPE7LX-26-U-9349 by OSHKOSH DEFENSE LLC for the Department of Defense. A quantity of 460 units is requested at a unit price of $460.00, totaling $211,600, with delivery required within 158 days FOB origin. The item is covered under DLA Direct CONUS procurement and is subject to strict compliance with DLA packaging standards per RP001, MIL-STD-2073-1E, and MIL-STD-129 for marking, with no special marking required. Packaging must use unit container E5, intermediate container E5, and follow prescribed preservation methods including dry cleaning and no cushioning materials. Quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and the contractor must adhere to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. Cybersecurity compliance is mandated through CMMC Level 2 Self-Assessment, and the contract includes a zero variance allowance on quantity. All deliveries are subject to inspection and acceptance at the destination. The contract was posted August 9, 2026, with responses due by August 24, 2026.
Other Electronic Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CASTER, SWIVEL
Solicitation # SPE7LX-26-U-9356
This contract specifies the procurement of swivel casters under solicitation SPE7LX-26-U-9356, with a total quantity of 33 units, each identified by the NSN 5340015812855 and part number S-7010-PR-4SL-ZB or S-7010-PRB-4SL-ZB from THE HAMILTON CASTER & MFG. COMPANY. The item is a critical application requiring compliance with MIL-STD-130N for identification marking of U.S. military property, and all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements supersede any conflicting specifications. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Packaging must follow DLA requirements, including MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the material is hazardous, in which case FED-STD-313 and TQ requirement IP025 apply. Palletization must adhere to RP001. Delivery is FOB origin with a 116-day timeline, zero quantity variance allowed, and inspection and acceptance occur at destination. The contract is issued under a Women-Owned Small Business set-aside with a unit of issue of EA and is managed by the Department of Defense’s Strategic Acquisition Program Directorate.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9351
The contract is for two mounting brackets identified by NSN 5340-01-587-3815 under solicitation SPE7LX-26-U-9351, with a response deadline of August 24, 2026, and a delivery requirement of 79 days after award. The procurement is a total small business set-aside under NAICS code 332722, managed by the Department of Defense’s Strategic Acquisition Program Directorate. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with applicable revisions governed by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item involves technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, including employees of foreign subsidiaries, and requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training on export-controlled data handling, and formal approval from the DLA controlling authority. The point of contact for inquiries is Theodore Misiolek, with further details available through the DIBBS portal.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
RETAINER, NUT AND BOLT
Solicitation # SPE7LX-26-U-9353
This contract is for the procurement of a retainer, nut, and bolt with NSN 5340-01-384-7624 and part number 294055, supplied by Monadnock Company and Leonardo Spa Helicopters Division under solicitation SPE7LX-26-U-9353. The quantity is 72 units, delivered FOB origin with a delivery window of 116 days and no variance allowed in quantity. All items must comply with DLA packaging requirements as outlined in RP001, including strict adherence to MIL-STD-129 for marking and labeling, and commercial packaging per ASTM D3951 unless the item is classified as hazardous under FED-STD-313, in which case packaging must meet TQ requirement IP025. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which override any conflicting commercial standards. Inspection and acceptance occur at the destination, and the unit of issue is each (EA) with a total contract value of $72.00. The item is designated as a critical application item, requiring strict compliance with all imposed standards, and is issued under a DLA direct, CONUS procurement structure.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, EXTE
Solicitation # SPE7LX-26-U-9361
This contract specifies the procurement of a helical extension spring with NSN 5360-01-507-8261 and part number 1881880 under solicitation SPE7LX-26-U-9361, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The requirement calls for 65 units delivered FOB origin within 104 days with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, while palletization adheres to DLA’s RP001 packaging requirements, with all technical and quality standards from the DLA Master List taking precedence over ASTM standards. The unit of issue is each, priced at $65.00 per unit, totaling $4,225, and this is an estimated quantity not guaranteed for full purchase by the IDC. The contract is part of a simplified acquisition and is governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date, which supersedes any conflicting specifications. All government identification must be removed from non-accepted supplies, and the delivery terms strictly enforce origin point shipment with destination inspection. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, under NAICS code 332613 for spring manufacturing. Primary point of contact is Theodore Misiolek, and all logistics and packaging details align with DLA’s standardized procedures as outlined in their official documentation and unit of issue reference tables.
Spring Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 336310
New
DIBBS
BOWL, SEDIMENT
Solicitation # SPE7LX-26-U-9362
This contract pertains to the procurement of a BOWL, SEDIMENT with NSN 2910-01-687-9089 and part number 20771574, issued under solicitation SPE7LX-26-U-9362 as a total small business set-aside. The contractor is required to deliver 55 units, each at a unit price of $55.00, for a total price of $3,025.00, with delivery due within 74 days from award and FOB origin. The item must be shipped with no variance in quantity—neither plus nor minus—and inspected at the destination point. DLA packaging standards take precedence over all others, requiring compliance with ASTM D3951 and mandatory adherence to MIL-STD-129 for marking and labeling, with palletization governed by the DLA Packaging Requirements for Procurement. All packaging and unit of issue must reflect the contract’s specified quantity per unit pack, and no government identification may be removed from non-accepted supplies. Ozone-depleting chemicals are strictly prohibited in the manufacture or packaging of this item, and any substitutes require pre-approval unless explicitly authorized by the specification. The technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. Delivery is directed via DLA Direct within the Continental United States, and the unit of issue is each (EA), consistent with DoD and ANSI X12 standards.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7LX-26-U-9359
The contract is for the procurement of two units of a vehicular bracket identified by NSN 2590-01-524-6137 under Solicitation SPE7LX-26-U-9359, with a total small business set-aside and a NAICS code of 332510. Delivery is required within 92 days of award, and the solicitation was posted on August 9, 2026, with responses due by August 24, 2026. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and all technical and quality specifications referenced by R or I numbers must be met. The contract imposes strict restrictions on the use of Class I ozone-depleting chemicals, prohibiting their inclusion in any delivered items, even if specifications otherwise permit, and requires prior approval for any substitute chemicals. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and approved DLA authorization. DFARS 252.225-7048 governs the handling of this controlled data, including disclosures to foreign persons within the U.S. Additionally, government identification must be removed from non-accepted supplies, and packaging must adhere to DLA procurement standards. Cybersecurity obligations include CMMC Level 2 certification for any third-party assessors involved. The primary point of contact is Theodore Misiolek of the Defense Logistics Agency's Strategic Acquisition Program Directorate.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7LX-26-U-9357
The contract pertains to the procurement of 57 mounting plates with NSN/part number 5340-00-614-7275 under solicitation SPE7LX-26-U-9357, which is a total small business set-aside with a NAICS code of 332510. Delivery is required within 95 days after order award, and responses must be submitted by August 24, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and all items must not contain Class I ozone-depleting chemicals, with any substitute chemicals requiring prior approval unless explicitly authorized by specifications. Configuration changes require formal engineering change proposals or variance requests. Technical data associated with this item is subject to export control under ITAR or EAR, and access is restricted to contractors with approved JCP certification, completion of required DOD export control training, and formal authorization from DLA. Distribution of controlled data is limited to qualified U.S. entities and their subsidiaries, with DFARS 252.225-7048 applying. Government identification must be removed from non-accepted supplies, and full and open competition is mandated. The point of contact for inquiries is Theodore Misiolek at the Defense Logistics Agency.
Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7LX-26-U-9360
This contract, issued under solicitation number SPE7LX-26-U-9360, covers the procurement of 30 units of COVER, ACCESS with NSN 5340-01-579-2214 at a unit price of $30.00, totaling $900.00. The item is classified under DLA DIRECT, CONUS coverage with delivery required within 116 days FOB origin, and no variance in quantity is permitted—exactly 30 units must be delivered. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 standards. If the material is hazardous per FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 applies, though DLA requirements override this. The Unit of Issue is EA, and the Quantity per Unit Pack is specified as 001. The contract is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the point of contact. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, and applies to simplified acquisition procedures, meaning the revision of the DLA Master List in effect on the solicitation issue date controls unless amended. The NAICS code is 332722, and the item is to be delivered without government identification removed, in accordance with RQ011. The DoD unit of issue is used, and corresponding ANSI X12 equivalents can be referenced via the provided DLA link. The estimated quantity noted does not guarantee purchase by the IDC, and all technical and quality requirements referenced via R or I numbers are incorporated through the DLA Master List accessible online.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 332999
New
DIBBS
COVER, MANHOLE
Solicitation # SPE7LX-26-U-9355
This contract specifies the procurement of manhole covers under solicitation SPE7LX-26-U-9355, with a total quantity of four units and a unit price of $4.00, resulting in a total price of $16.00. The item is identified by NSN 2510-01-571-5911 and is classified under a Total Small Business Set-Aside. Delivery is required within 65 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for marking and labeling. Palletization must follow DLA Packaging Requirements for Procurement, and the unit of issue is each. Government identification must be removed from any non-accepted supplies. The contract is for direct, CONUS delivery and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. All technical and quality requirements referenced are defined in the DLA Master List, and the applicable revision is controlled by the solicitation issue date. The procurement is part of a federally awarded contract with a response deadline of August 24, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7LX-26-U-9354
The contract is for the procurement of six shafts with a shoulder design, identified by NSN 3040-01-497-9450, under solicitation SPE7LX-26-U-9354, with a response deadline of August 24, 2026. This is a total small business set-aside under NAICS code 333613, managed by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 47 days after order placement. The technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign national employees and subsidiaries, even within the United States. Access to such data is restricted to contractors who hold an approved US/Canada Joint Certification Program certification, have completed required DOD export control training, and have received formal approval from DLA.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7LX-26-U-9352
The contract pertains to the supply of three gaskets identified by NSN 5330-01-181-0636, with a delivery deadline of 62 days after order placement. All items must comply with the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on procurement size. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, requiring medium duty, waterproof, greaseproof, and opaque bags to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The gaskets must be free of asbestos, and any replacement materials require approval under Clause L30 and Provision 4 conditions. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components like batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents as defined by NAVSEA; portable lamps and instruments containing mercury must include shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. The solicitation number is SPE7LX-26-U-9352, posted on August 9, 2026, with responses due by August 24, 2026, under the NAICS code 339991, managed by the Department of Defense’s Strategic Acquisition Program Directorate with Theodore Misiolek as the primary point of contact.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 15 days
View Details