Top

Structural Concrete Placement

Active

State & Local

Response Deadline08/19/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

California → Public Works Department of City of RiversideView Agency

NAICS

238110 - Poured Concrete Foundation and Structure ContractorsView NAICS

Place of Performance

CA, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 09:00:00 PM UTCin 21 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyCalifornia → Public Works Department of City of Riverside

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → Public Works Department of City of Riverside

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Placement of 1,465 cubic yards of structural concrete for footings, abutments, and substructures with formwork and curing.

Similar Contracts

Same NAICS industry code

NAICS: 238110

New

Federal

Structural & Seismic RetrofittingThe contract entails structural reinforcement and seismic retrofitting work to ensure compliance with current building code requirements and load capacity standards, focused on enhancing the safety and integrity of a facility located in 39855. The project is classified as a subcontract under NAICS code 238110, indicating it falls under the specialty trade contractors category for structural steel and precast concrete work. The solicitation was posted on July 29, 2026, with a firm deadline for responses on August 30, 2026, at 4:00 AM. The contracting activity is under the Department of Defense through its W2SD Endist New York entity, though specific details regarding the office address and point of contact are not provided. The work must be performed at the designated site without additional location specifications, and there is no set-aside designation indicated for small businesses or other categories.

POSTED

DEADLINE

Concrete Foundations and SlabsThe contract pertains to the formation, reinforcement, and pouring of concrete for foundations, slabs, and structural elements at Fort Stewart, Georgia, under the NAICS code 238110 for concrete work. This is a subcontract opportunity issued by the Department of Defense through the W074 Endist Savannah office, with a response deadline of August 6, 2026, at 4:00 PM. Work must be performed at the specified location, emphasizing precision and compliance with military construction standards for structural integrity. All parties must adhere to the timeline and technical requirements outlined, ensuring timely delivery and quality execution of concrete work critical to the facility’s infrastructure.

POSTED

DEADLINE

Biffy Facility ImprovementsThe contract pertains to comprehensive improvements to a biffy facility, including the construction of a new non-combustible, explosion-proof structure equipped with interior and exterior lighting, ventilation, space heating for freeze protection, fire extinguishers, and surveillance cameras. Access points will be designed with doors to allow safe equipment operation, and all surfaces will meet sanitization standards per NFPA 820 and FDA guidelines. The existing pump system will be upgraded with a duplicate backup pump and a biffy tank to ensure operational continuity during failures, along with backflow prevention measures. Emergency safety equipment including an eyewash station and emergency shower with tempered water will be installed. The facility’s electrical and mechanical systems will be modernized, and new channel drains and wet well cleaning infrastructure will be added to enhance maintenance and safety. The project is managed by the Aviation Project Management Group under the Port of Seattle, with a NAICS code of 238110 indicating construction of heavy and civil engineering projects. The primary point of contact is Jay Kim, reachable via email and phone, with Savita Rishiraj serving as the project manager for the contractor. Although the solicitation was posted in July 2026 and no set-aside details are provided, the scope requires specialized compliance with safety, sanitation, and redundancy standards, suggesting a high-precision industrial construction effort. All improvements aim to ensure regulatory adherence, system resilience, and personnel safety within a critical infrastructure environment.

Aviation Project Management Group

POSTED

DEADLINE

Concrete Supply and PlacementThe contract titled Concrete Supply and Placement requires the full scope of concrete work for structural and site improvements, encompassing formwork construction, concrete pouring, proper curing methods, and final finishing to meet specified standards. All work must be completed in accordance with industry best practices and project requirements, ensuring durability and safety for both structural elements and site features. The subcontract is open for bidding with a response deadline of September 10, 2026, and is classified under NAICS code 238110, indicating it aligns with concrete work services. The opportunity is managed by the state of Utah, with performance expected to take place within its jurisdiction, though specific location details are not provided. Bidders must be prepared to handle all logistics, materials, labor, and equipment necessary to deliver the required concrete services without reliance on additional contractual support.

POSTED

DEADLINE

Concrete Supply and Placement (Base)The contract entails the supply and installation of concrete for base and structural elements, encompassing all associated tasks such as formwork erection, reinforcement placement, concrete pouring, surface finishing, and proper curing procedures. Work is to be performed in accordance with specified technical and quality standards to ensure structural integrity and durability, with an emphasis on precision and compliance with industry best practices for concrete applications. All materials and labor must be provided by the subcontractor, who is responsible for scheduling, site preparation, and coordination with other trades as required. The opportunity is classified as a subcontract under NAICS code 238110 and is posted by the state of Utah through its BonfireHub portal. The solicitation was made available on July 28, 2026, with a response deadline of August 24, 2026. The place of performance is not fully specified, but the work is to be conducted within Utah under the oversight of the Utah agency. There is no set-aside designation, and no point of contact is listed, meaning interested parties must rely on the provided portal link for additional information and submission instructions.

POSTED

DEADLINE

Concrete Surface Preparation and RepairThe contract titled Concrete Surface Preparation and Repair outlines the scope of work requiring inspection, grinding, patching, and leveling of an existing concrete sub-base to meet the structural and functional requirements for a new flooring system. The work must ensure proper adhesion of the new flooring material and establish adequate drainage characteristics to prevent water accumulation and long-term damage. This subcontract is classified under NAICS code 238110, indicating it falls within the construction of building construction contractors specializing in foundation, structure, and building exterior contractors. The opportunity was posted on July 28, 2026, with a response deadline set for August 14, 2026, and is solicited by the State of Utah through its official procurement platform. The place of performance and exact location details are not specified in the provided data, but the work is expected to be conducted within Utah. There is no set-aside designation provided, suggesting the contract is open to all qualified subcontractors without demographic or size-based restrictions. Interested parties must submit proposals through the Utah BonfireHub portal prior to the stated deadline.

POSTED

DEADLINE

Township Administration Building Parking Lot RepairsSealed proposals are being solicited by the Township of Lower Merion for the repair and resurfacing of the parking lot at the Township Administration Building located at 75 E Lancaster Avenue, Ardmore, Pennsylvania, under Contract Number 26-28-4215. Bids must be submitted electronically through the PennBid platform by 11 a.m. on Thursday, August 27, 2026, and will be publicly opened at that time. Each bid must include a Bid Guaranty and be accompanied by a Performance Bond and a Labor and Materials Bond amounting to 100% of the contract value, along with a Maintenance Bond of 25%. The scope of work involves milling and overlaying the existing bituminous parking lot surface, with selective full-depth pavement replacement and application of new pavement markings, with construction scheduled to begin in mid- to late October 2026 after award, which is anticipated for September 23, 2026. Bidders are directed to review the Detailed Specifications developed by Pennoni Associates, Inc. via the PennBid website, and may inspect the site during normal business hours, though access is limited due to high traffic. All work must comply with prevailing wage requirements, the Americans with Disabilities Act, and strict non-discrimination policies prohibiting bias based on race, color, religion, sex, national origin, disability, or sexual orientation and gender identity. Contractors must designate an official to monitor employment practices and adhere to 41 CFR Part 60-4-8 for dispute resolution. Insurance requirements mandate commercial general liability, business auto liability, workers’ compensation, and professional liability coverage, with the Township named as an Additional Insured on all policies except workers’ compensation. Certificates must reference the bid number and title. All subcontractors must carry equivalent insurance. Contractors must submit a Statement of Bidder’s Qualifications, a Non-Collusion Affidavit, and, if applicable, an MBE/WBE certificate. The contract is subject to termination for integrity violations, including fraud or deceit, allowing the Township to seek liquidated damages, replacement costs, and debarment or suspension of the contractor. All materials must be delivered and handled in accordance with manufacturer specifications to prevent damage, loss, or contamination, and packaging must include proper labeling with handling and installation instructions. Payment will be processed via the Paymerang Network, with non-enrolled contractors receiving a check for the first invoice and ACH or credit card

POSTED

DEADLINE

Sludge Wasting Facility ConstructionThe contract involves the construction of a sludge wasting facility encompassing excavation, concrete structures, piping connections, and containment systems necessary for the safe handling and disposal of sludge. Work under this subcontract is required to meet specific engineering and environmental standards to ensure operational integrity and regulatory compliance. The solicitation is open for bids with a response deadline of September 3, 2026, and is issued under NAICS code 238110, which classifies the work as foundation, structure, and building exterior contractors. The contract is managed by the River Valley Regional Commission in Georgia, though no specific location or contact details are provided. All work must be performed at the designated place of performance, though the exact city or state is not specified in the data. Interested parties must submit proposals before the deadline through the provided online portal.

River Valley Regional Commission

POSTED

DEADLINE

Pre-Engineered Post-Tensioned Concrete Tank InstallationThe contract encompasses the supply and installation of a pre-engineered post-tensioned concrete tank, including all associated foundation work, formwork, concrete pouring, post-tensioning operations, and comprehensive quality testing to ensure structural integrity and compliance with engineering specifications. The scope requires end-to-end execution from site preparation through final inspection, with emphasis on precision in post-tensioning and adherence to industry standards for durability and safety. This subcontract is issued under NAICS code 238110 for concrete work and is managed by the River Valley Regional Commission in Georgia, with a response deadline of September 3, 2026. The project is not subject to a set-aside provision, and while specific performance location and contact details are not provided, interested parties are directed to the official Georgia procurement portal for additional submission requirements and documentation. All work must be completed in accordance with the technical and procedural expectations defined by the contracting authority.

River Valley Regional Commission

POSTED

DEADLINE

Concrete Forming and PouringThe contract titled Concrete Forming and Pouring is a subcontract for the complete execution of concrete work including formwork assembly, reinforcement installation, and pouring operations for foundational elements, slabs, walls, and other structural components. The work is required to be performed at a designated location in Columbia, South Carolina, with the zip code 29207-5460, and falls under the NAICS code 238110 for concrete work. The opportunity was posted on July 28, 2026, with a firm deadline for responses on August 10, 2026, and is managed by the Defense Logistics Agency under the Department of Defense. There is no set-aside designation indicated, and the point of contact details are not provided. Interested parties must submit their proposals through the official DIBBS portal using the referenced solicitation number SPE8E826T4901.

Defense Logistics Agency

POSTED

DEADLINE

Concrete Foundations and SlabsThe contract is for the formwork, reinforcement, and pouring of structural concrete for foundations, footings, and ground-level slabs under the title Concrete Foundations and Slabs. It is classified as a subcontract with a NAICS code of 238110 and is issued by the Defense Logistics Agency, a component of the Department of Defense. Performance is required at Mechanicstown, Pennsylvania, with a postal code of 17050-2411. The solicitation was posted on July 28, 2026, and all responses must be submitted by August 10, 2026. The contract does not specify a set-aside type or organization type, and no point of contact information is provided. Interested parties can access further details via the provided DIBBS link.

Defense Logistics Agency

POSTED

DEADLINE

Concrete Forming and PlacementThe contract titled Concrete Forming and Placement involves the full scope of concrete work for structural foundations, slabs, and walls, including forming, reinforcement placement, and pouring operations. Work must be performed in accordance with applicable standards and specifications to ensure structural integrity and compliance with engineered requirements. The solicitation is issued as a subcontract under NAICS code 238110 and is managed by the Department of Defense through the Maritime Supply Chain organization. Performance is required at a designated location in Tracy, California, with the zip code 95304-5000. The opportunity was posted on July 28, 2026, and responses must be submitted no later than August 10, 2026. No set aside provisions are specified, and the contract is open to eligible subcontractors meeting technical and regulatory criteria. All submissions must be made through the official DIBBS portal linked via the provided URL.

MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days

View Details

More opportunities from California → Public Works Department of City of Riverside

Same awarding agency

NAICS: 541360

SLED

Civil Engineering CAD & Drafting SupportThe contract titled Civil Engineering CAD & Drafting Support seeks a vendor to provide professional CAD and BIM drafting services in support of civil engineering projects under the direct supervision of a lead engineer. The primary deliverables include the creation of detailed construction drawings, technical details, and complete plan sets necessary for public infrastructure work. The work is to be performed as a subcontract under the Public Works Department of the City of Riverside in California, with all output aligned to project specifications and engineering standards. The solicitation is open for responses until September 15, 2026, at 7:00 PM, and is classified under NAICS code 541360, which pertains to architectural, engineering, and related services. No set-aside designation or specific organization type requirements are indicated, and the place of performance and point of contact details are not specified, leaving location and direct communication to be coordinated with the issuing agency. All proposals must be submitted through the designated online portal prior to the deadline to be considered for award.

Geophysical Surveying and Mapping Services

POSTED

DEADLINE

Construction Cost Estimating & Bid SupportThe contract seeks specialized services to develop detailed construction cost estimates that will guide the design development process and prepare comprehensive bid packages for upcoming construction activities. The work is critical to ensuring accurate budgeting, informed decision-making during design phases, and a competitive, well-informed bidding environment for future contractors. Estimators must provide thorough, itemized analyses aligned with industry standards to support the Public Works Department of the City of Riverside in planning and procurement. This subcontract is classified under NAICS code 541620, indicating it involves architectural and engineering services related to construction cost estimation. The solicitation was posted on July 22, 2026, with a firm deadline of September 15, 2026, at 7:00 PM for responses. The work is expected to be performed in support of public infrastructure projects under the jurisdiction of the City of Riverside, California, although specific location details are not provided. The contract does not specify a set-aside status, and no point of contact information is included in the posting, meaning proposers must engage through the provided portal link to obtain further details or submit proposals.

Environmental Consulting Services

POSTED

DEADLINE

Electrical & Controls EngineeringThe contract seeks an electrical and controls engineering firm to design comprehensive electrical systems for a new lift station, with specific focus on motor controls, SCADA system integration, and backup power solutions. The work must adhere strictly to the National Electrical Code and all applicable local utility requirements to ensure safety, reliability, and regulatory compliance. The scope demands technical expertise in industrial control systems and utility-grade electrical infrastructure, requiring a deep understanding of wastewater system operations and automation protocols. This subcontract is issued by the Public Works Department of the City of Riverside under NAICS code 541330, and responses are due by September 15, 2026, at 7:00 PM. The project is positioned as a subcontract opportunity without a set-aside classification, and all work is expected to be performed in support of the city’s infrastructure modernization goals. Though no specific location or point of contact is listed, performance is tied to the city’s operational needs within California, and participation requires full alignment with municipal engineering standards and utility coordination procedures.

POSTED

DEADLINE

Environmental Compliance & Hazardous Materials AssessmentThe contract requires the performance of a Phase I Environmental Site Assessment to identify potential environmental contaminants at a municipal lift station prior to its demolition. The scope includes evaluating the site for the presence of asbestos, polychlorinated biphenyls, and contaminated soils, with the goal of ensuring regulatory compliance and safeguarding worker and public health during demolition activities. All assessments must adhere to applicable environmental standards and industry best practices to accurately characterize existing hazards and support safe project execution. This subcontract is issued by the Public Works Department of the City of Riverside in California and is open for response until September 15, 2026. The North American Industry Classification System code 541620 indicates that the work falls under environmental consulting services. The project is critical to the city’s infrastructure upgrades and demands thorough documentation of environmental conditions to mitigate legal, financial, and safety risks. Contractors must be qualified to conduct site investigations in compliance with local, state, and federal regulations, including proper reporting and data validation procedures.

Environmental Consulting Services

POSTED

DEADLINE

Surveying & Topographic MappingThe contract requires comprehensive site surveying services to support design development, including boundary delineation, topographic mapping, and utility location identification. All deliverables must be provided in digital format, compatible with CAD systems, ensuring seamless integration into engineering and planning workflows. The work is scoped to deliver accurate, reliable spatial data that informs infrastructure projects under the oversight of the Public Works Department of the City of Riverside. Subcontractors must submit proposals by the deadline of September 15, 2026, at 7:00 PM, under the NAICS code 541370 for surveying and mapping services. The contract is not set aside for any specific small business category and is intended to support public infrastructure initiatives within the jurisdiction of California. All work must be performed in alignment with the requirements of the City of Riverside, with no specified physical location for performance beyond the general scope of services tied to municipal projects.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Civil Engineering Design & PermittingThe contract requires lead civil engineering design services for the replacement of the Pierce Street Wastewater Lift Station in the City of Riverside, encompassing comprehensive site layout, grading, drainage systems, and coordination of utility relocations. All design work must adhere strictly to the City of Riverside’s standards and include full preparation of construction documents necessary for permitting and construction. The scope is focused on delivering a fully engineered solution that supports the functional and regulatory requirements of the wastewater infrastructure upgrade. The solicitation is issued as a subcontract under NAICS code 541330, with a response deadline of September 15, 2026, at 7:00 PM. The contracting entity is the Public Works Department of the City of Riverside, operating within the state of California. While details such as the exact location, point of contact, and set-aside status are not specified, the work is expected to occur within the City of Riverside’s jurisdiction, and proposers must be prepared to meet all local engineering, permitting, and construction documentation requirements.

POSTED

DEADLINE

CIVIL ENGINEER CONSULTANT FOR PIERCE STREET WASTEWATER LIFT STATIONThe City of Riverside's Public Works Department is soliciting proposals through RFP 2562 for a Civil Engineering Consultant to design construction documents for the replacement of the existing Pierce Street Wastewater Lift Station with a new facility at the same location, ensuring full compliance with the City’s Sewage Lift Station and Force Main guidelines. The consultant must hold a valid State of California Professional Engineer license in good standing and be registered with the California Department of Industrial Relations, with all subcontractors also required to maintain DIR registration at the time of proposal submission. Proposals must be submitted electronically via the PlanetBids portal by September 15, 2026, and must include detailed information on the firm’s qualifications, key personnel with resumes, five professional references from comparable projects within the last five years, and a comprehensive disclosure questionnaire covering past contract terminations, bankruptcies, legal actions, and any conflicts of interest with City officials or employees. The evaluation process prioritizes technical merit over price, with qualifications and experience weighted at 45%, approach and methodology at 25%, and professional references at 10%, totaling an 80% technical score; price is not weighted in the provided criteria, suggesting it may be reviewed separately for budget alignment. The contract requires strict adherence to the narrative proposal format with an eight-page limit for the methodology section, and no exceptions are permitted to the Sample Agreement’s insurance or indemnification terms. All deliverables must be performed at the Pierce Street site in Riverside, California, and proposers must disclose any disciplinary history, felony convictions, or prior liquidated damages without triggering automatic disqualification, though failure to disclose will result in non-compliance. The City retains sole authority for acceptance and inspection without specifying formal inspection standards or locations, and while payment mechanisms, accounting codes, or contract administration staff are not identified, the procurement operates as a municipal non-federal action with no use of FAR clauses or federal procurement formats.

POSTED

DEADLINE

Electrical and Control Systems Installation

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Precast Box Beam Girder Supply and Erection – Facia

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Precast Box Beam Girder Supply and Erection – Interior

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Drilled Shaft (CIDH) Pile Installation – 72” Diameter

Site Preparation Contractors

POSTED

DEADLINE

Drilled Shaft (CIDH) Pile Installation – 36” Diameter

Site Preparation Contractors

POSTED

14 days ago

DEADLINE

in 21 days

View Details