Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

STRUCTURAL SECTION, SPE

Active
SPE8E4-26-T-1956Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of 40 units of a structural section with a special shape, manufactured from steel grade 1010, hot rolled and tempered, each measuring 2 feet in length, identified by part number 12269960 and NSN 9520-01-087-3068. The item must conform to technical and quality requirements referenced through R and I numbers from the DLA Master List of Technical and Quality Requirements, with packaging, marking, and shipping strictly adhering to MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, containment codes, and no special marking. The product must be delivered FOB origin within 90 days of the contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Manufacturing and quality control must follow all referenced technical data packages and drawings, including revision histories dated between 2005 and 2022. The required delivery date is January 13, 2027, with a need ship date of August 5, 2026. The contract, issued under solicitation SPE8E4-26-T-1956, requires a certificate of conformance and is governed by DLA packaging and inspection rules, with all shipments directed to the DDSP New Cumberland facility in Pennsylvania.

General Info

40 steel units, part 12269960, NSN 9520-01-087-3068, FOB origin, delivered by Jan 13, 2027, per MIL-STD.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332111 - Iron and Steel ForgingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E4-26-T-1956 for DLA Troop Support Metals

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Pamela Duffey
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STRUCTURAL SECTION,SPECIAL SHAPED
STRUCTURAL SECTION,SPECIAL SHAPED
STEEL COMP 1010
HOT ROLLED
TEMPERED
2 FT LENGTH
US ATAC P/N: 12269960
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
52.246-15 CERTIFICATE OF CONFORMANCE
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
TDP Rev A Gen 1 IAW BASIC DRAWING NR 19207 12269960 REVISION NR G DTD 01/11/2005 PART PIECE NUMBER: P/N 12269960
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 12355846 REVISION NR F DTD 04/04/2007 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 12269960 REVISION NR DTD 04/11/2022 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE8E4-26-T-1956
SECTION B
PR: 7017758327 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017758327 0001 EA 40.000
NSN/MATERIAL:9520010873068
DELIVERY (IN DAYS):0090
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
MANUFACTURE AND ACCEPTANCE INSPECTION OF THE ABOVE MATERIAL SHALL BE IN ACCORDANCE WITH ALL DRAWINGS, SPECIFICATIONS AND OTHER TECHNICAL DATA LISTED IN THIS TDP.
IP083: Packaging, Marking, and Shipping of Metal Plating, Sheets, and other Metal Products
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE8E4-26-T-1956
SECTION B
PR: 7017758327 PRLI: 0001 CONT’D
Need Ship Date:08/05/2026 Original Required Delivery Date:01/13/2027
SPE8E4-26-T-1956 NSN/Part Number: 9520-01-087-3068 Quantity: 40 EA Purchase Request: 7017758327QTY: 40 Delivery: 90 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332111
New
DIBBS
CHANNEL, STRUCTURAL
Solicitation # SPE8E4-26-T-1964
The contract specifies the procurement of a structural steel channel made from ASTM A36 steel, with exact dimensional specifications of 1.50 by 2.50 inches, identified by part number 12442180. The finish requires zinc plating per ASTM B633, category SC4 (Fe/Zn 25), type VI, with a prime coating conforming to MIL-DTL-53030 or MIL-PRF-32348, adhering to dry film thickness standards under MIL-DTL-53072, followed by a topcoat compliant with MIL-PRF-22750, type II, in color #24533 semigloss green. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to solicitations or amendments. The product must conform to MIL-STD-130N for identification marking and be manufactured under an ISO 9001:2008 Quality Management System. A Certificate of Conformance and quality compliance documentation are mandatory, with CDRLs and DD Form 1423s required for delivery verification. The contract calls for 11 units to be delivered FOB origin within 182 days, with zero variance permitted in quantity. Inspection and acceptance occur at the destination point, specifically the DLA Distribution Red River facility in Texarkana, Texas. Packaging must comply with ASTM D3951, prioritized by DLA Master List requirements, and all units must be labeled and palletized per MIL-STD-129 and RP001 packaging standards. The unit of issue is each (EA), priced at $11.00 per unit, with total contract value of $121.00. The NSN for the item is 9520-01-540-5600, and the original delivery requirement was June 3, 2027, with a need ship date of August 5, 2026. The contract is subject to federal acquisition regulations, including FAR 52.246-15 and higher-level quality requirements, and solicitation details are accessible via DIBBS. The contract falls under NAICS code 332111 and is managed by the Department of Defense through the Red River Receiving Building, with Pamela Duff
RED RIVER RECEIVING BLDG

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
HEAD, SAFETY, PRESSURE R
Solicitation # SPE8E6-26-T-4003
The contract pertains to the procurement of a commercial item identified as HEAD, SAFETY, PRESSURE RELIEF with NSN 4820011548123 and part number 03787 from AMEREX CORPORATION, for a quantity of 89 units at a unit price of $89.00, totaling $7,921.00. Delivery is required within seven days of award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance will occur at the destination. All packaging must comply with ASTM D3951 as superseded by applicable DLA Master List of Technical and Quality Requirements, with labeling and marking strictly following MIL-STD-129, and palletization adhering to RP001 DLA Packaging Requirements. The item is subject to Defense Logistics Agency regulations governing commercial items, including provisions for the removal of government identification from non-accepted supplies. The required delivery date is October 18, 2026, with a need ship date of August 25, 2026. Shipping must follow DLAD Proc Notes C19 and C20, and the deliver-to address is DLA Distribution Depot Hill at Hill Air Force Base, Utah, with the contract reference SPE8E6-26-T-4003. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332111, and is managed by the Department of Defense through Depot Hill.
DEPOT HILL

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1948
The contract specifies the procurement of steel bar material classified as COMP 302, supplied in hot rolled hexagonal shape, annealed condition, with a width of 0.625 inches across flats and lengths ranging between 8 and 12 feet, sold by the foot at a reference weight of 1.150 pounds per foot. The material must be supplied in whole-foot increments only and meet exact dimensional tolerances. Comprehensive quality and technical requirements are mandated under the DLA Master List of Technical and Quality Requirements, with certifications including a Certificate of Quality Compliance Mill-Material Certification required for every shipment, to be provided to both the customer and the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on each unit including the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer's heat and lot number, and dimensions. Marking methods are restricted to stenciling or approved stamping, with labeling using waterproof, non-contaminating inks. Adhesive labels are required for bars under 0.250 inches in nominal outer diameter, and tags are acceptable for wire. All suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award, and any deviation from this requirement must be explicitly declared, with noncompliance treated as an unauthorized substitution potentially subject to criminal penalties. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with preservation and marking governed by ASTM A700 and MIL-STD-129R, including special codes Z and ZZ for preservation and marking. Labels must be secure, legible, and resistant to handling, with additional marking rules applying when shipments involve dual units of measure. Delivery is FOB origin, with inspection and acceptance occurring at destination, under a 167-day delivery schedule with a 10% quantity variance allowance. The NSN is 9510-00-265-1650, with a total quantity of 54 feet and a unit price of $54.00 per foot, shipped to the DLA Distribution facility in New Cumberland, PA. All documentation referenced in the Technical Data Package including CDRL-METALSCERT, SAE AMS-S-7720B, ASTM A700-14, and MIL-STD-129R govern compliance, and QSL program waivers apply for qualified suppliers,
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1951
The contract specifies the procurement of 30 feet of steel bar, composed of grade 303 stainless steel, in a cold-finished hexagon shape with an annealed temper, measuring 0.875 inches across flats and supplied in whole-foot lengths of 10, 11, or 12 feet, with a reference weight of 2.307 pounds per foot. Material must comply with ASTM A582/A582M and SAE AMS2806 standards, and a Certificate of Quality Compliance, also known as a mill-material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. All units must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stenciling or adhesive labels; stamping is permitted except for die stamping, and marking fluids must not contaminate the product. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with special labeling codes Z and ZZ per ASTM A700, and palletization must adhere to DLA packaging rules. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and a 10% variance in quantity is allowed. The item is designated under NSN 9510-00-293-5009 and must be delivered by February 1, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and non-compliance constitutes an unauthorized substitution with potential criminal penalties. The contract waives source inspection requirements for qualified suppliers, and CDRL-METALSCERT documentation must be provided if not already available in the DLA system.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
BINDER, LOAD
Solicitation # SPE8EF-26-Q-0166
The contract specifies the procurement of 557 units of a BINDER, LOAD with NSN 3990-01-323-0771 under solicitation SPE8EF-26-Q-0166, requiring delivery within 60 days after award at a firm fixed price with zero variance in quantity. The item must be manufactured using a forging process, necessitating specialized tooling, and sourcing inquiries for tooling, materials, or production support should be directed to DLA’s Aviation or Land & Maritime Supply Chains. Strict compliance with MIL-STD-2073-1E packaging standards is mandated, including specific method codes for preservation, wrapping, and unit containerization, with all marking adhering to MIL-STD-129 and no special marking applied. Palletization must conform to DLA packaging requirements, and the final destination for delivery is DLA Distribution San Diego. The item is subject to CMMC Level 2 self-assessment requirements and inclusion of technical and quality standards from the DLA Master List, with configuration change management governed by engineering change proposal protocols. Government identification must be removed from non-accepted supplies, and cybersecurity protections apply as covered defense information. The delivery is FOB destination, with inspection and acceptance occurring at origin, and transportation logistics follow DLA procedural notes C19 and C20. The purchase request number is 7015993527, and the anticipated ship date is November 2, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E9-26-T-3292
This contract pertains to the procurement of 334 feet of chrome-molybdenum (4130) aircraft-quality cold-drawn, normalized steel bar, measuring 0.500 inches square and 10 to 12 feet in length, with strict adherence to SAE AMS-S-6758B and AMS2806 standards. All material must be supplied in whole-foot increments and accompanied by a Certificate of Quality Compliance, which must be included with each shipment and submitted to the DLA Troop Support Contracting Officer. Mandatory continuous markings on each unit include the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions; markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material. Adhesive labels are required for bars, tubes, and shapes under 0.250 inches in nominal OD, while tags are permitted for wire. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional components such as batteries, sensors, or instruments specified by NAVSEA, with additional containment requirements for portable devices. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award, and any deviation from this requirement must be explicitly declared. The government waives source inspection requirements for QSL-compliant suppliers, relieving them of certain quality conformance inspections. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with special codes Z and ZZ as defined by ASTM A700; vinyl or plastic-coated pressure-sensitive labels are authorized for structural shapes and loose shipments. Each shipment must include the quantity in both units of measure if applicable, and must be delivered FOB origin to the designated DLA warehouse in Tracy, California, no later than 167 days from award, with a required ship date of February 1, 2027. A 10% quantity variance is permitted, and inspection and acceptance occur at the destination. The contract also references DLA’s Master List of Technical and Quality Requirements, which governs all technical and quality stipulations unless amended, and compliance is mandatory under penalty of criminal or civil action for unauthorized substitutions.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1944
The contract specifies the procurement of hot-rolled steel bar material with a diameter of 8.000 inches and lengths between 10 and 12 feet in whole-foot increments, with a reference weight of 170.90 pounds per foot. The material must meet the UNS K02600 specification and conform to referenced standards including ASTM A36/A36M-19, ASTM A6/A6M-24B, ASTM A700-14, and SAE AMS2806. Full compliance with technical and quality requirements outlined in the DLA Master List is mandatory, and a Certificate of Quality Compliance must accompany each shipment, with a copy submitted to the DLA Troop Support Contracting Officer. Continuous identification marking is required on each unit, including the DLA contract number, NSN, specification revision, alloy details, manufacturer name, heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied using approved methods such as stenciling or stamping, excluding die stamping; adhesive labels are required for bars under 0.250 inches in nominal diameter. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with special codes Z and ZZ as defined in ASTM A700. Vinly or plastic-coated pressure-sensitive labels are authorized for structural shapes and banded units. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award; non-compliance constitutes an exception that must be explicitly declared. Failure to comply with QSLD requirements may result in criminal penalties. Source inspection is waived for contracts awarded to qualified suppliers, relieving the need for certain quality conformance inspections. The material is to be delivered FOB origin in a quantity of 15 feet per unit, with a ±10% variance allowed, within 167 days of contract award, with an original required delivery date of November 12, 2026. Inspection and acceptance occur at the destination facility. Shipping and packaging must follow MIL-STD-129R with special marking code ZZ, and all shipments must be addressed to the DLA Distribution facility at New Cumberland, Pennsylvania. The contract is issued under solicitation SPE8E4-26-T-1944, and technical data packages, including CDRL-METALSCERT, must be reviewed for complete compliance.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E9-26-T-3286
This contract pertains to the procurement of cold-rolled carbon steel bars measuring 0.500 inches thick, 4.00 inches wide, and 10 to 12 feet in length, with exact whole-foot increments required. Each unit must be accompanied by a Certificate of Quality Compliance, which must be submitted with every shipment and forwarded to the DLA Troop Support Contracting Officer. Strict marking requirements mandate that every bar include the DLA contract delivery order number, NSN, specification revision, grade, class, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be applied via stamping or stenciling using legible, waterproof, non-contaminating fluids and must withstand normal handling; for smaller bars and tubes under 0.250 inches in nominal outer diameter, adhesive labels are required, and tags are acceptable for wire. Compliance with MIL-STD-129R for packaging and marking is mandatory, with special preservation method ZZ aligned to ASTM A700, and all shipments must include dual-unit quantities when applicable. The material must conform to ASTM A108, SAE AMS2806, MIL-STD-129R, and ASTM A700-14, and must be supplied only by suppliers listed on the Qualified Suppliers List for Distributors (QSLD); any deviation or unauthorized substitution may result in rejection, civil penalties, or criminal liability. Packaging must follow MIL-STD-2073-1E, and delivery is FOB origin to the DLA Distribution Center in New Cumberland, Pennsylvania, with a 167-day delivery window and a 10% variance allowed in quantity. The contract number is SPE8E9-26-T-3286, covering 281 feet of material under NSN 9510-00-231-2091, with performance required by February 26, 2027.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
BEAM, STRUCTURAL
Solicitation # SPE8E4-26-T-1947
The material specified is a structural steel beam made from Grade A hot-rolled steel, conforming to ASTM-A6 Table A2.1 “W” shapes with a flange height of 4.000 inches, an overall width of 6.000 inches, flange thickness of 0.375 inches, and web thickness of 0.250 inches. The beams must be delivered in whole-foot lengths between 30 and 40 feet, with a nominal weight of 16.0 pounds per foot. All material must comply with the American Bureau of Shipping (ABS) Rules for Building and Classing Steel Vessels, Part 2, Section 1, including Appendix 2/D, and must be produced by an approved steel mill. No substitute materials are permitted. The steel must be accompanied by a Certificate of Quality Compliance (Mill-Material Certification) for every shipment, submitted both with the goods and directly to the DLA Troop Support Contracting Officer. Each beam must be permanently marked with the DLA contract delivery order number, NSN, specification number and revision, grade, class, type, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stamping (excluding die stamp) or stenciling using non-contaminating fluid, and must withstand normal handling. Adhesive labels are required for units under 0.250 inches nominal OD. Packaging must meet MIL-STD-2073-1E and DLA packaging requirements, with special markings in accordance with ASTM A700 and MIL-STD-129R. Only suppliers on the Qualified Suppliers List for Distributors (QSLD) are eligible to quote, and any deviation must be explicitly declared. Failure to comply with QSLD, marking, certification, or dimensional requirements may result in rejection of the product and potential criminal penalties. Deliveries are due within 167 days of contract award, FOB origin, with a 10% quantity variance allowed, and shipments must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1949
Steel bar, UNS K23080, round, 1.250 inches in diameter, must be supplied in whole-foot lengths between 10 and 12 feet, at approximately 4.170 pounds per foot, and must fully comply with SAE AMS6411K Revision K and SPE8E4-26-T-1949 Section B. Every unit must be permanently marked with the DLA contract delivery order number, NSN, specification revision, grade, alloy, manufacturer’s name, heat and lot number, and dimensions; markings must be legible, waterproof, and non-contaminating, applied via stenciling or approved methods excluding die stamping. Adhesive labels are required for bars under 0.250 inches in nominal diameter, and tags are acceptable for wire. A Certificate of Quality Compliance, including mill certification, must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement constitutes an exception that must be explicitly noted; non-compliant products may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and RP001, with preservation per ASTM A700 and marking compliant with MIL-STD-129, using special code ZZ. All shipments are FOB origin, with a 10% quantity variance allowed, inspected and accepted at destination, and must be delivered within 167 days to Tinker AFB, Oklahoma. The required delivery date is November 28, 2026, with a need ship date of February 1, 2027.
DEPOT OKLAHOMA

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
Federal
Conventional Tube Forgings per Drawing # 13122585, Revision New, for 155mm M775 Cannon, for the Watervliet Arsenal
Solicitation # W911PT26RA012
This contract solicitation is for the procurement of 72 conventional tube forgings per Drawing #13122585, Revision New, intended for use in the 155mm M776 Cannon at Watervliet Arsenal, New York. First Article Testing is required, and delivery is specified as FOB Destination. The solicitation, identified as W911PT26RA012, is scheduled for release on or around August 5, 2026, with responses due by August 4, 2026. All technical data associated with the forgings is designated as Militarily Critical Technical Data, and only businesses certified by the U.S./Canada Joint Certification Office with an active DD Form 2345 and a legitimate requirement may access it; foreign entities beyond Canada are ineligible. Participation requires an active System for Award Management (SAM) registration with current representations and certifications. The solicitation and all subsequent amendments will be issued electronically via SAM.gov, and bidders are solely responsible for monitoring the site for updates; failure to do so may result in nonresponsive offers. The acquisition is subject to international trade agreements including the World Trade Organization Government Procurement Agreement. All communications and submissions must be conducted through the designated electronic portal, and direct inquiries should be directed to Amanda Robinson at the Watervliet Army facility.
W6QK Acc Wva

POSTED

about 8 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332111
New
DIBBS
Precision Titanium Forging and CastingThe contract entails the precision manufacturing of a titanium tube elbow using either forging or casting techniques, with all tooling designed and fabricated in-house to comply with stringent military specifications. The work requires advanced metallurgical expertise and strict adherence to quality control standards to ensure the component meets the performance and durability requirements for defense applications. The contractor must demonstrate capability in titanium processing, including thermal and mechanical control during fabrication, and must maintain full traceability of materials and processes throughout production. The contract is issued under the NAICS code 332111 for forged steel and forging shops, and the performance location is specified as Lemoore, California, with a delivery deadline of August 17, 2026. Offerors must respond by the stated deadline, and while the solicitation is classified as a subcontract, no set-aside provisions are designated, indicating it is open to all qualified entities. The contracting activity falls under the Department of Defense’s Fluid Handling Division, and the project is expected to integrate into critical fluid systems requiring high-strength, corrosion-resistant titanium components.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details