Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Georgia was posted on July 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Structural Steel Fabrication and Erection

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312
New
ACE-1199-1386-00 Tower Design and Fabrication for Various RCAG/RTR Sites (ADM, DPA, ONL, and RWF)
Solicitation # ace-1199-1386-00-tower-design-fabrication-various-rcagrtr-sites-adm-dpa-onl-rwf
Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Oklahoma, Illinois, Nebraska, and Minnesota, specifically serving the ADM, DPA, ONL, and RWF locations. This project falls under NAICS code 332312 and requires that the selected offeror be fully bonded and insured to perform the work. This opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 2, 2026. The primary point of contact for this solicitation is Thomas Sheehan.
Parsons Corporation

POSTED

14 minutes ago

DEADLINE

in 4 days
NAICS: 332312
New
DIBBS
Marine Metal Door Manufacturer/SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, requires the fabrication or procurement of seven marine-grade metal doors, identified as NSN 2040014437111. The supplier must utilize corrosion-resistant materials and ensure all units strictly adhere to MIL-STD-129 military marking standards and domestic material restrictions. The final products are to be packaged for FOB Origin shipment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332312, with performance taking place in New Cumberland. Interested parties must submit their responses by November 9, 2026. This contract serves prime contractors who are fulfilling broader DLA supply obligations.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 20 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Ballistic and Critical Welding for M88E1 Hatch Door
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Manufacturing of Mending Plates (NSN 5340-01-732-9372)This subcontract, issued by the DLA Weapons Support Land Supply Chain, requires the manufacture of 84 precision mending plates under NSN 5340-01-732-9372. The contractor must fabricate the units according to RBC Transport Dynamics Corp part number 180004 specifications and DLA technical requirements. All production must utilize Berry Amendment compliant materials and processes free of ozone-depleting chemicals. Deliverables must be packaged in accordance with MIL-STD-129 and ASTM D3951 standards. The opportunity is a total small business set-aside under NAICS code 332312, with performance located in New Cumberland. To be eligible, the contractor must provide a CMMC Level 2 self-assessment and obtain engineering source approval. The response deadline for this requirement is November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Fabrication of Side Rail Assembly, Soft Top (Left Hand)
DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

in 15 days
NAICS: 332312
New
DIBBS
Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

in 5 days
NAICS: 332312
New
DIBBS
Manufacturing of Vehicular Joint Companion Flanges (NSN 2520-21-879-0986)
DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 20 hours ago

DEADLINE

in 15 days
NAICS: 332312
New
DIBBS
Supply of Vehicular Component Brackets (NSN 2590016091130)This subcontract involves the manufacture or sourcing of 30 specialized vehicular component brackets for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The components must strictly adhere to Part Piece Number 12504326-010 and NSN 2590016091130 as specified in the technical drawings. Performance will take place in Tracy, California, under NAICS code 332312. Critical compliance mandates include strict adherence to Berry Amendment domestic sourcing requirements to ensure materials are produced within the United States. Additionally, the use of additive manufacturing is prohibited unless explicit authorization is granted. The response deadline for this requirement is November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Fabrication of Small Arms Storage Racks
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 20 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Precision Tube Fabrication (NSN 1730-01-303-9285)This subcontract, issued by the Department of Defense under a Service-Disabled Veteran-Owned Small Business set-aside, requires the fabrication of 15 structural dolly tubes. The work must be performed in New Cumberland and adhere strictly to NSN 1730-01-303-9285 and MIL-STD-100G technical specifications. The contractor is expected to utilize precision tube cutting, bending, and welding equipment to deliver the completed units for prime contractors on DLA supply contracts. Compliance and security are critical components of this agreement. The selected provider must maintain CMMC Level 2 certification and ensure full adherence to DFARS 252.204-7012 as well as ITAR and EAR regulations. Interested parties must respond by November 9, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

in 12 days
NAICS: 332312
New
DIBBS
Supplier of Structural Channels (NSN 9540-01-474-4371)This subcontract involves the supply of structural channels to prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals contracts. The selected supplier is responsible for manufacturing or sourcing materials that strictly adhere to the technical specifications of NSN 9540-01-474-4371. The scope of work includes rigorous quality control and palletization processes conducted in accordance with RP001 DLA Packaging Requirements for Procurement. The supplier is tasked with the final delivery of these palletized structural channels to a designated destination, with performance centered in the 10567-5000 zip code area.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

in 5 days
NAICS: 332312
New
DIBBS
Supply of Internal Wrenching Bolts (NSN 5306015955093)This subcontract involves the supply of 13 specialized internal wrenching bolts meeting NSN 5306015955093 specifications for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing these components without the use of additive manufacturing, ensuring strict adherence to the domestic material restrictions mandated by the Berry Amendment and the Buy American Act. The project falls under NAICS code 332312 and is managed by the Department of Defense. Performance for this contract is designated for New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 4, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

The contract titled Structural Steel Fabrication and Erection involves the fabrication and on-site assembly of structural steel components for buildings or bridges under a subcontract arrangement. It is associated with the NAICS code 332312, which specifically pertains to structural steel fabricating, and is issued by the City of Sandy Springs in Georgia. The solicitation was posted on July 10, 2026, with a response deadline of July 27, 2026, at 10:00 PM Eastern Time. While the exact location of performance is unspecified, work is expected to occur within Georgia under the oversight of the City of Sandy Springs. No set-aside classification is indicated, meaning the contract is open to all eligible subcontractors without restrictions based on size or other categories. Interested parties must submit proposals via the provided online portal before the deadline to be considered.

General Info

Structural steel fabrication and erection for City of Sandy Springs, Georgia, due July 27, 2026.

Agency

Georgia → City of Sandy Springs

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

GA, USA

Set-Aside

NONE

Documents

This scope was carved out of 26-056.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

26-056 City Wide Landscaping Services

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGeorgia → City of Sandy Springs
ContactsNo contacts available
OfficeN/A
Organization / AgencyGeorgia → City of Sandy Springs
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Fabrication and on-site assembly of structural steel components for buildings or bridges.

More opportunities from Georgia → City of Sandy Springs

Same awarding agency

NAICS: 541330
SLED
CIPP Delegated Design and EngineeringThis subcontract for the City of Sandy Springs in Georgia involves providing CIPP delegated design and engineering services for local government stormwater projects. The selected contractor will be responsible for performing structural calculations and liner thickness designs for both circular and non-circular pipes, ensuring all work adheres to ASTM F1216 and ASCE MOP 145 standards. The primary deliverables include signed and sealed shop drawings and comprehensive design calculation reports. To qualify for this engagement, the contractor must employ a Licensed Professional Engineer registered in the State of Georgia. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026. This project falls under NAICS code 541330 and is intended for prime contractors managing municipal stormwater infrastructure.
Engineering Services

POSTED

9 days ago

DEADLINE

in 22 days
View Details
NAICS: 327999
SLED
CIPP Liner and Resin SupplyThis subcontract for the City of Sandy Springs in Georgia involves the supply of critical CIPP liner materials and resins for local government stormwater projects. The scope of work includes the manufacture and delivery of resin-impregnated fabric tubes, curing chemicals, lubricants, pre-liners, and hydrophilic gaskets. All manufactured components, specifically the wet-out fabric tubes and thermosetting resin-impregnated felt or GRP, must be produced in accordance with ASTM F3240 standards. The supplier is responsible for delivering all certified materials directly to the project site and providing the necessary manufacturer certificates and test reports to verify ASTM compliance. This procurement falls under NAICS code 327999, with a response deadline set for November 19, 2026.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

9 days ago

DEADLINE

in 22 days
View Details
NAICS: 327332
SLED
CIPP Stormwater Pipe Lining InstallationThis subcontract for the City of Sandy Springs in Georgia involves the trenchless rehabilitation of stormwater pipelines. The selected contractor will be responsible for the installation of cured-in-place pipe liners by inverting and expanding resin-impregnated tubes, curing thermosetting resins, and sealing liner material at manholes to deliver a monolithic CIPP liner. The scope of work includes the use of cure tracking technology with temperature sensors and the performance of pre- and post-installation CCTV inspections following NASSCo PACP formats. Qualified candidates must possess manufacturer certification and a minimum of five years of relevant experience. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026. This project falls under NAICS code 327332 and is intended for contractors capable of supporting prime contractors on local government infrastructure projects.
Concrete Pipe Manufacturing

POSTED

9 days ago

DEADLINE

in 22 days
View Details
NAICS: 237110
SLED
27-014 Trenchless Stormwater Pipe Rehabilitation Project - 2027
Solicitation # 27-014
The City of Sandy Springs, Georgia, is soliciting bids for the 27-014 Trenchless Stormwater Pipe Rehabilitation Project to rehabilitate existing stormwater infrastructure at seventeen locations throughout the city. The project utilizes cured-in-place pipe (CIPP) lining methods for various pipe sizes, including 18-inch, 24-inch, and 30-inch diameters. The selected contractor must provide all necessary machinery, labor, and materials, ensuring all work adheres to Georgia Department of Transportation Standard Specifications and NASSCO CIPP Installation Guidelines. Key deliverables include pre- and post-CCTV inspection reports and a detailed quality control plan. Materials must be sourced from GDOT certified suppliers and stored according to strict temperature and time requirements to maintain resin integrity. Bids are due by November 19, 2026, and must be submitted exclusively through the Bonfire portal. The award is based on the total bid price, provided the contractor is deemed responsible and not in arrears to the city. Required documentation includes a bid price certification, a valid Georgia Utility License, and GDOT prequalification references. The contract requires strict compliance with the Drug-Free Workplace Act, the Georgia Security and Immigration Compliance Act, and Title VI of the Civil Rights Act of 1964. Once awarded, the contractor must commence work within ten days of the Notice to Proceed, with a total performance period of 120 calendar days to achieve substantial completion. Payment is processed monthly based on work evaluated by a city inspector, with the contractor eligible to request up to 90 percent of the contract price for incorporated work and approved on-site materials.
Water and Sewer Line and Related Structures Construction

POSTED

9 days ago

DEADLINE

in 22 days
View Details
NAICS: 541380
SLED
Testing and DocumentationThis subcontract for the City of Sandy Springs involves providing independent quality testing and project documentation services for prime contractors on municipal projects. The scope of work focuses on technical verification, including sub-grade compaction testing via nuclear density gauges and concrete strength testing using cylinders and presses. Additionally, the contractor is responsible for capturing before-and-after video documentation of the project sites. The selected provider must deliver comprehensive compaction reports, concrete test results, and all project video files. This opportunity, categorized under NAICS code 541380, was posted on October 13, 2026, with a response deadline of November 13, 2026.
Testing Laboratories and Services

POSTED

15 days ago

DEADLINE

in 16 days
View Details
NAICS: 327320
SLED
Material Supply (GDOT Certified)This subcontract opportunity is for the supply of certified construction materials to prime contractors working on municipal projects for the City of Sandy Springs in Georgia. The selected provider must be a GDOT-certified supplier capable of delivering ready-mix concrete, agricultural lime, and fertilizer directly to project sites using bulk material haulers. The solicitation was posted on October 13, 2026, with a response deadline of November 13, 2026. This procurement falls under NAICS code 327320 and is specifically designated for those who can meet the rigorous certification standards required for Georgia Department of Transportation materials.
Ready-Mix Concrete Manufacturing

POSTED

15 days ago

DEADLINE

in 16 days
View Details
NAICS: 238910
SLED
Utility Adjustment ServicesThis subcontract for Utility Adjustment Services involves performing critical modifications to existing utility structures for prime contractors working on municipal projects within the City of Sandy Springs, Georgia. The scope of work focuses on adjusting manholes and water meter boxes to ensure they are flush with final grades, utilizing concrete rings, adjustment frames, and lids in strict accordance with local utility standards and GDOT specifications. The opportunity was posted on October 13, 2026, with a response deadline of November 13, 2026. Classified under NAICS code 238910, the contract ensures that all utility infrastructure is properly integrated into the new surface levels of city projects.
Site Preparation Contractors

POSTED

15 days ago

DEADLINE

in 16 days
View Details
NAICS: 238990
SLED
Pavement Marking and SignageThis subcontract for Pavement Marking and Signage involves providing road markings and highway signage for prime contractors working on municipal projects within the City of Sandy Springs, Georgia. The scope of work includes the application of white and yellow thermoplastic solid traffic stripes and the installation of aluminum extruded panel highway signs featuring reflective sheeting and galvanized steel posts, all performed in accordance with GDOT Standard Specifications. The opportunity was posted on October 13, 2026, with a response deadline of November 13, 2026. Classified under NAICS code 238990, the contract focuses on the delivery and installation of completed road markings and traffic signs to ensure municipal infrastructure meets required safety and regulatory standards.
All Other Specialty Trade Contractors

POSTED

15 days ago

DEADLINE

in 16 days
View Details
NAICS: 561730
SLED
Erosion Control and LandscapingThis subcontract focuses on the installation and maintenance of erosion control measures and landscaping for prime contractors working on municipal projects within the City of Sandy Springs, Georgia. The scope of work includes the installation of Type A Temporary Silt Fences and 4ft Orange Barrier Fences, as well as the application of mulch, sod, fertilizer, and agricultural lime in accordance with Best Management Practices. The selected provider is responsible for delivering a completed landscape strip and ensuring all soil is properly stabilized. This opportunity is categorized under NAICS code 561730, with a response deadline set for November 13, 2026.
Landscaping Services

POSTED

15 days ago

DEADLINE

in 16 days
View Details
NAICS: 561990
SLED
Traffic Control ServicesThis subcontract for Traffic Control Services supports prime contractors on municipal projects within the City of Sandy Springs, Georgia. The selected provider will be responsible for implementing comprehensive Traffic Control Plans to manage both vehicular and pedestrian movement. This includes the deployment of safety controls such as cones, barrels, and signage to ensure a safe and managed traffic flow for the entire duration of construction. All work must be performed in strict accordance with MUTCD standards and GDOT Standard Specification Section 150. The opportunity was posted on October 13, 2026, with a response deadline of November 13, 2026. The project falls under NAICS code 561990.
All Other Support Services

POSTED

15 days ago

DEADLINE

in 16 days
View Details
NAICS: 238910
SLED
Earthwork and Site GradingThis subcontract for Earthwork and Site Grading involves providing site clearing, demolition, and grading services for prime contractors on municipal projects within the City of Sandy Springs, Georgia. The scope of work includes the saw cutting of asphalt and concrete, the removal of vegetation, granite curbing, driveways, and walkways, and the precise grading of topsoil and clean fill in accordance with GDOT Standard 210-0100. Using excavators and graders, the contractor is responsible for delivering a fully graded site that is prepared for the subsequent installation of sidewalks and pavement. This opportunity falls under NAICS code 238910, with a response deadline set for November 13, 2026.
Site Preparation Contractors

POSTED

15 days ago

DEADLINE

in 16 days
View Details
NAICS: 238110
SLED
Concrete Construction (Sidewalks & Curbs)This subcontract for the City of Sandy Springs involves the installation of concrete sidewalks, curbs, and gutters for prime contractors on municipal projects. The scope of work includes the construction of 340 linear feet of 6-foot-wide sidewalk, 6 by 24 inch curb and gutter, and 6 inch concrete valley gutters. All work must adhere to Grade A GDOT Standard Specifications, and the contractor is required to use GDOT-certified concrete. To be eligible, contractors must possess GDOT Prequalification and Registration. The project is categorized under NAICS code 238110, with a response deadline set for November 13, 2026. The final deliverable is a fully completed sidewalk, curb, and gutter system meeting all specified municipal and state standards.
Poured Concrete Foundation and Structure Contractors

POSTED

15 days ago

DEADLINE

in 16 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332312
Closed
SLED
Anchoring System Components Supply
Parks and Wildlife Department

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332312
Closed
SLED
Miscellaneous Metals & Fabrications
Infrastructure Engineering

POSTED

4 months ago

CLOSED

13 days ago
View Details
NAICS: 332312
Closed
SLED
Structural Steel Fabrication and Erection
City of Independence

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332312
Closed
SLED
Supply of U.S.-Made Iron and Steel Components
Texas Department Of Transportation

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332312
Closed
SLED
Dock Safety and Navigation Equipment Supply
Dnr750530 District 3-fish Management Dnrsum

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332312
Closed
SLED
Guardrail and Safety Barrier Installation
Harris County

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332312
Closed
SLED
Structural Steel Fabrication
Iowa

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332312
Closed
SLED
Hinged Access Gate Frame Assembly
City of Roseville

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332312
SLED
Communication Tower Material Supply
Eastern Municipal Water District

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332312
Closed
SLED
Traffic Signal Pole and Mast Arm Supply
Texas Department of Transportation

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332312
Closed
SLED
Structural Steel Fabrication and Installation
Texas Department of Transportation

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 332312
Closed
SLED
Reinforcement Steel (Rebar) Supply and Fabrication
Texas Department of Transportation

POSTED

4 months ago

CLOSED

3 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS