Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on August 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

STUD, CONTINUOUS THR

Closed
SPE4A6-26-T-21ZLFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

This solicitation is for the procurement of one continuous thread stud made of nickel copper alloy material for the Naval Ship Systems Command. The item is identified by NSN 5307-01-466-6409 and must be delivered within 20 days after the order is placed. The contract is managed by the ASC Commodities Division of the Department of Defense under solicitation number SPE4A6-26-T-21ZL. Compliance requires adherence to DLA packaging requirements and specific technical and quality standards. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with a general requirement for zero non-conformances in sample lots. Additionally, the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions approved by NAVSEA.

General Info

Procurement of one nickel copper alloy thread stud for Naval Ship Systems Command.

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

UNIT 100233 BOX 1, FPO, AP, 96660, USA

Set-Aside

NONE

Documents

1

SPEA46-26-T-21ZL Request for Quotations

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Office AddressUSA

Full Description

Show more
STUD,CONTINUOUS THR
STUD, CONTINUOUS THREAD
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NICKEL COPPER ALLOY MATERIAL
NAVAL SHIP SYSTEMS COMMAND (80064)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
QUALITY ASSURANCE DATA
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 5307-01-466-6409 Quantity: 1 EA Purchase Request: 7017966616QTY: 1 Delivery: 20 days ADO

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE4A6-26-T-40D5
Solicitation SPE4A6-26-T-40D5 is a fixed-price procurement issued by the Defense Logistics Agency for 91 internal and external tooth lock washers, identified by NSN 5310012533723. The required components must be manufactured from Stainless Steel CRES 302 and adhere to technical specifications FF-W-100 Type 3 Style 1 and FF-W-100C(1). Dimensional requirements are governed by MS 45904-86 or ASME B18.21.1, with specific tolerances for the inner diameter (.512 to .530 inches), outer diameter (1.380 to 1.410 inches), and thickness (.052 to .060 inches). The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania by November 27, 2026, with a delivery window of 202 days after order. Quality assurance and inspection will occur at the point of origin, requiring compliance with MIL-STD-1916, ASQ H1331, or MIL-STD-105/ASQ Z1.4, with a zero-nonconformance acceptance policy. Packaging must follow RP001 and ASTM D3951, while marking and labeling must comply with MIL-STD-129 and MIL-STD-130N. Item Unique Identification is not required. The contract incorporates various FAR and DFARS clauses, including the Buy American Act and safeguarding requirements for covered defense information under NIST SP 800-171. Payment processing is mandated through the Wide Area Workflow system. This is not a small business set-aside, and it falls under NAICS code 332722.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

4 days ago

DEADLINE

in about 15 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS