Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

STUD, CONTINUOUS THREAD

Active
SPE4A7-26-T-566MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a STUD, CONTINUOUS THREAD with NSN 5307-01-248-1440 and part number B4012945, for a quantity of two units at a unit price of $2.00, totaling $4.00. Delivery is required within 20 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements, and all markings must adhere to MIL-STD-130N for military property identification. The item must be marked with the designated control number and shipped via the fastest traceable means, excluding parcel post, to Fort Stewart, GA. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. Sampling follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment is required. The solicitation number is SPE4A7-26-T-566M, with a response deadline of July 21, 2026, and the required delivery date is July 8, 2026. All documentation and drawings are accessible via DLA’s DIBBS portal.

General Info

Procure two STUDs at $2.00 each, deliver by July 8, 2026, to Fort Stewart, GA, compliant with MIL-STD and CMMC Level 2.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

AWCF SSA, FORT STEWART, GA, 31314-0000, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-566M.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Naron Sanderlin
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STUD,CONTINUOUS THREAD
STUD,CONTINUOUS THREAD
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
(56996) DEPARTMENT OF THE ARMY HQ
IDENTIFY TO:
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT DLA DURING "OPEN SOLICITATION ONLY". TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)> FOR EBS SOLICITATIONS USE URL HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
DETAILED DRAWING
TDP Rev A Gen 1 IAW BASIC DRAWING NR 56996 B4012945 REVISION NR A DTD PART PIECE NUMBER: P/N B4012945
SPE4A7-26-T-566M
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017425334 0001 EA 2.000
NSN/MATERIAL:5307012481440
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W81U3R
0003 CS BN CO A DISTRIBUTI
BLDG 1720A MCFARLAND AVE
AWCF SSA
FORT STEWART GA 31314-0000
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W81U3R
0003 CS BN CO A DISTRIBUTI
BLDG 1720A MCFARLAND AVE
AWCF SSA
FORT STEWART GA 31314-0000
US
MARKFOR
W81U3R
SPE4A7-26-T-566M
SECTION B
PR: 7017425334 PRLI: 0001 CONT’D
0003 CS BN CO A DISTRIBUTI
BLDG 1720A MCFARLAND AVE
AWCF SSA
FORT STEWART GA 31314-0000
US
M/F: (TCN) W81U3R61830652
RDD: 777
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/08/2026
SPE4A7-26-T-566M NSN/Part Number: 5307-01-248-1440 Quantity: 2 EA Purchase Request: 7017425334QTY: 2 Delivery: 20 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
BOLT, MACHINEThe contract specifies the procurement of three machine bolts with NSN 5306-01-665-3500 at a unit price of $3.00 each, totaling $9.00, to be delivered within ten days of order placement under the solicitation number SPE4A6-26-T-05NL. All items must be shipped FOB origin, with no variance allowed in quantity, and are subject to inspection and acceptance at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence and govern material specifications, including mandatory adherence to MIL-STD-129 for labeling and marking. Palletization must follow DLA Packaging Requirements RP001, and the use of parcel post is prohibited; shipments must utilize the fastest traceable means. The delivery point is the W8071J facility in Annville, PA, with RDD 555 and project code TP 2. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified, and undefined attributes are treated as major. The required delivery date is July 8, 2026, and the contract includes detailed government use codes and point of contact information for contractual inquiries.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SPRING, SPIRAL, TORSIONThis contract is for the procurement of seven spiral torsion springs identified by NSN 5360-01-595-6984, with a delivery requirement of 164 days after order. The solicitation number is SPE7L1-26-T-829K, issued on July 13, 2026, with responses due by July 24, 2026, under the NAICS code 332722. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the acquisition type and timing. Packaging must comply with DLA standards, and all supplies must be free of asbestos and ozone-depleting chemicals; substitutions require prior approval. The contractor is required to retain supply chain traceability documentation in accordance with DLAD Procurement Note C03 from August 2016, and government identification must be removed from non-accepted items. Covered defense information may apply, and source approval documentation must be submitted as required. Performance is expected at Phoenix, Arizona, 85043, with Derek Roberts as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
Precision Machining and Metal FabricationThe contract involves the supply of precision-machined metal components essential for antenna assembly, specifically waveguides, brackets, and RF cavities, all requiring stringent dimensional tolerances and military-grade surface finishes to ensure optimal performance in demanding operational environments. These components are critical to the functionality and reliability of defense-related communication systems, necessitating advanced manufacturing techniques and rigorous quality control protocols to meet exacting technical standards. The contract is classified as a subcontract under the North American Industry Classification System code 332722, indicating it falls within the category of machine shop services, and is associated with the Defense Logistics Agency under the Department of Defense. It was posted on July 13, 2026, and the place of performance and specific office details are not provided, though the contractual obligations are tied to fulfilling military specifications. The work is managed through the DIBBS system under contract number SPE7M526P0485, and the recipient is expected to deliver components that adhere to defense-grade requirements without deviation.
Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 165 units of a screw, cap, socket head, self-locking, identified by NSN 5305-00-940-9531, under solicitation SPE4A6-26-T-05PC, with a delivery requirement of 146 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and the item is subject to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. All units must be physically marked in accordance with MIL-STD-130N for identification, and government identification must be removed from non-accepted supplies. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels or AQLs as specified. Thread dimensions for Class 3A and 3B threads must conform to System 22 of FED-STD-H28/20, excluding small internal and external threads. Cybersecurity compliance requires CMMC Level 2 self-assessment, and third-party assessments must be performed by a certified C3PAO. The solicitation is fully competitive under military specification, with drawings available only during the open solicitation period via the DIBBS portal, and performance is to be delivered to San Diego, CA. The primary point of contact is Lisa Harvie of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SELF-DRILLINGThe contract pertains to the procurement of 14 packages of self-drilling screws, identified by NSN 5305-01-572-0554 and McMaster-Carr part number 91632A194, under solicitation SPE4A6-26-T-05NV. Delivery is required within 103 days to the destination in Tracy, California, with FOB origin terms and zero tolerance for quantity variance. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, and marking per MIL-STD-129 with no special marking required. Packaging and preservation must be free of mercury or mercury compounds, consistent with the prohibition in IP056, and palletization must conform to DLA packaging requirements. The screws must meet technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and sampling for inspection must follow MIL-STD-1916 or an equivalent zero-based plan, with zero non-conformances required unless otherwise stated. The contract stipulates that no mercury or mercury-containing substances may be intentionally introduced into the product or its packaging, with limited exceptions for specific functional uses such as batteries or sensors, all of which must adhere to NAVSEA 5100-003D containment guidelines. The contract further requires compliance with documentation protocols for source approval, and all materials must be free of government identification if rejected. Inspection and acceptance occur at the delivery destination, with the supplier responsible for meeting all packaging, labeling, and transportation directives as outlined in DLA procedural notes C19 and C20. The unit of issue is packaged (PG), and pricing is fixed at $14.00 per package for a total contract value tied to the 14-package quantity. The solicitation was posted on July 13, 2026, with responses due by July 21, 2026, and the item falls under NAICS code 332722 for screw manufacturing. The point of contact for the procurement is Michael Blain of the ASC Commodities Division, Department of Defense, and all items must be delivered to the specified warehouse address in Tracy, California. The contract enforces strict adherence to quality, packaging, and environmental requirements, with no allowance for unauthorized deviations or substances.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details