This Solicitation opportunity from Department Of Defense was posted on March 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

STUD, LOCKED IN

Awarded

SPE4A1-26-T-1679Federal

Submission Closed03/25/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332722

New

DIBBS

Supply of Flat Washers (NSN 5310-01-625-5545)This subcontract involves the supply of 54 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The required parts are identified by NSN 5310-01-625-5545 and Boeing PN 4M405-001, with delivery terms set as FOB Origin. Performance will take place in New Cumberland, Pennsylvania. The contractor must adhere to strict quality and compliance standards, including SAE AS9003 or ISO 9001 quality systems and a CMMC Level 2 Self-Assessment. Quality control must be performed according to MIL-STD-1916 or ASQ H1331, with packaging and shipment marking following ASTM D3951 and MIL-STD-129 respectively.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacturer of Self-Locking Gang Channel Nut Assemblies (NSN 5310-01-030-1803)This subcontract involves the fabrication and supply of 17 self-locking gang channel nut assemblies for the DLA Weapons Support ASC Commodities Division. The hardware must be manufactured according to NSN 5310-01-030-1803 and the DLA Master List of Technical and Quality Requirements using precision machining. All materials used in production must comply with the Buy American Act. The selected provider is required to maintain CMMC Level 2 certification and adhere to ITAR and EAR compliance standards. Completed units are to be delivered FOB Origin to DLA Distribution in Jacksonville, Florida. The response deadline for this opportunity is November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Sleeve Nuts (PN 497A63102-2)This subcontract involves the manufacture of 80 precision sleeve nuts, part number 497A63102-2, for the DLA Weapons Support ASC Commodities Division. The hardware must be fabricated using precision machining equipment and must be entirely free of mercury compounds in accordance with IP056. All units are to be delivered with a Certificate of Conformance and must adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards. The selected provider must maintain CMMC Level 2 certification and ensure full compliance with ITAR, EAR, and the Buy American Act. Performance for this contract will take place in Bremerton, Washington. Interested parties must submit their responses by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of Machine Bolts (NSN 5306001698639)This subcontract involves the manufacture and supply of 170 specialized machine bolts (NSN 5306001698639) for prime contractors supporting DLA Weapons Support ASC projects. The contractor is required to fabricate the bolts in strict accordance with Air Force Drawing 201416605 and RC001 source approval requirements. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards for final delivery to Robins Air Force Base. Compliance with several federal regulations is mandatory, including DFARS 252.204-7012 for cybersecurity, as well as the Buy American Act and the Berry Amendment. The project falls under NAICS code 332722 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305017060326)This subcontract involves the manufacture or procurement of 30 socket head cap screws, identified by NSN 5305017060326 and part number 3M1345-도BA, to support prime contractors on DLA Weapons Support ASC projects. The supplier must ensure all units adhere to DLA Master List requirements RA001, RP001, RQ011, and RQ017, with packaging and marking strictly following MIL-STD-2073-1E and MIL-STD-129 standards. The contract mandates full compliance with the Buy American Act and the Berry Amendment. Once completed, the 30 packaged screws are to be delivered to the Naval Air Systems Command Central Kitting Activity. This effort is managed under the Department of Defense via the DLA Weapons Support ASC Supplier OEM Division, with performance centered in Orange Park, Florida.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Screw Thread Insert (NSN 5325-01-647-8996)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the supply of a screw thread insert meeting NSN 5325-01-647-8996 specifications. The contractor is responsible for delivering one unit, ensuring that packaging adheres to MIL-STD-2073-1E Preservation Method 33 and marking complies with MIL-STD-129. Performance will take place at Camp Pendleton, California. The contract mandates strict adherence to domestic sourcing requirements per the Buy American Act and the Berry Amendment. Additionally, the provider must maintain cybersecurity compliance in accordance with NIST SP 800-171. Responses to this solicitation are due by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Machine Screws (NSN 5305-14-51-4157-6)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Machine Bolt Fabrication (NSN 5306015554678)This subcontract involves the fabrication of 609 specialized machine bolts under NSN 5306015554678 for the DLA Weapons Support ASC Commodities Division. All units must be produced according to Basic Drawing 19207 12419091 Revision C using precision machining equipment, with a strict prohibition on additive manufacturing. The contractor is required to ensure all materials are compliant with the Buy American Act and the Berry Amendment, and finished products must be packaged in accordance with MIL-STD-2073-1E. To be eligible, the provider must maintain CMMC Level 2 compliance and hold either an ISO 9001 or SAE AS9003 quality system certification. The project falls under NAICS code 332722 and will be performed in New Cumberland. Interested parties must respond by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Self-Locking Hexagon Nuts (NSN 5310-01-723-0284)This subcontract involves the manufacture or sourcing of 50 inspected self-locking hexagon nuts for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The hardware must strictly adhere to NSN 5310017230284, Basic Drawing NR 53711 8508014, and Part Piece Number 820-8508014-8-06A. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332722. The contractor is required to follow specific military standards for quality assurance and logistics, including sampling per MIL-STD-1916 or ASQ H1331, and marking and packaging according to MIL-STD-129 and MIL-STD-2073-1E. Additionally, the provider must ensure full compliance with DFARS 252.225-7001. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supplier of Flat Washers (NSN 5310009143234)This subcontract involves the procurement of 2,000 flat washers, identified as NSN 5310009143234 and Part S8157N8-010, to support prime contractors on DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with the DLA Master List of Technical and Quality Requirements. Delivery is required FOB Origin to Hill AFB, and the use of additive manufacturing is strictly prohibited. Compliance is mandatory across several critical standards, including MIL-STD-130N, MIL-STD-129, and ASTM D3951 for packaging. Additionally, the supplier must meet CMMC Level 2 cybersecurity requirements and adhere to the Buy American Act. The solicitation was posted on October 27, 2026, with a response deadline of November 4, 2026, under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of Flat Washers (NSN 5310-01-723-4415)This subcontract involves the manufacture of 202 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The components must be fabricated according to NSN 5310-01-723-4415, Goodrich Corporation part number 80-835, and TDP Rev A Gen 1 specifications. Production requires the use of precision machining or stamping equipment and materials that comply with the Buy American Act. Quality assurance must adhere to MIL-STD-1916 or ASQ H1331 sampling standards, with a strict prohibition on the use of hexavalent chromium. The final deliverable consists of 202 finished and inspected washers. The project is managed under NAICS code 332722 for the Department of Defense, with performance located in New Cumberland.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Pin-Rivet Collars (NSN 5320-01-177-3224)This subcontract involves the fabrication and supply of 869 Pin-Rivet Collars for prime contractors supporting DLA Weapons Support ASC projects. The manufacturer must produce the units according to NSN 5320-01-177-3224 technical specifications and adhere to DLA master list quality standards RA001, RC001, RP001, RQ011, and RQ017. Due to the nature of the components, the use of precision machining equipment is required, and all materials must comply with the Buy American Act. The completed units are to be delivered FOB Origin to the DLA Distribution Depot located at Tinker AFB, Oklahoma. This procurement falls under NAICS code 332722 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days

AI Contract Overview

This procurement contract is for the acquisition of 87 units of Locked In Studs, identified by NSN 5307-01-114-5255 and part number MS51989-105D16. The items are designated as critical application items and must adhere to specific technical standards, including SAE AS51989C and NASM45909. Delivery is required within 171 days after order, with a need ship date of September 13, 2026, and a final required delivery date of October 13, 2026. The shipment is destined for the DLA Distribution New Cumberland facility in Pennsylvania, with FOB, inspection, and acceptance all occurring at the origin. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including the submission of a Certificate of Quality Compliance and compliance with various Contract Data Requirements Lists. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for certain sample lots. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements for procurement.

General Info

Agency

Department Of Defense → AVIATION SUPPLY CHAIN

Contract Value

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Awardee

ALAMO AIRCRAFT, LTD.

Award Issued Date

03/30/2026, 12:00:00 AM UTC

Documents

SPE4A1-26-T-1679.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedMar 17

Solicitation

AwardedMar 30

Contract was awarded

Submission Closed

03/25/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN

Office AddressUSA

Contacts

Latoya Anderson

contact@example.gov

+1 (555) 000-0000

Full Description

STUD,LOCKED IN
STUD,LOCKED IN
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Collaboration Folders (CFolders) they can also be viewed in Appendix 1 of the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Shelf-life Additional Requirements RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
QAP EQ003 APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
SPE4A1-26-T-1679
SECTION B
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THE FOLLOWING EXCEPTIONS TO DRAWING (DWG): MS51989-105D16 APPLY:
ENG DRAWING NUM: ,,,,,,,,REMARKS:
SAE AS51989C,,,,,,,,,,,,-105D16
CRITICAL APPLICATION ITEM
IAW BASIC NON GOVT STD SAE AS51989A
REVISION NR A DTD 06/01/2006
PART PIECE NUMBER: P/N MS51989-105D16
IAW REFERENCE QAP 13873 QAP-EQ003
REVISION NR D DTD 02/09/2023
PART PIECE NUMBER:
IAW REFERENCE NON GOVT STD NASM45909
REVISION NR 2 DTD 05/31/2016
PART PIECE NUMBER:
IAW REFERENCE QAP 13873 CDRL-COQC-26033
REVISION NR DTD 12/04/2025
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015954840 0001 EA 87.000
NSN/MATERIAL:5307011145255
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SPE4A1-26-T-1679
SECTION B
PR: 7015954840 PRLI: 0001 CONT’D
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:09/13/2026 Original Required Delivery Date:10/13/2026
SPE4A1-26-T-1679 NSN/Part Number: 5307-01-114-5255 Quantity: 87 EA Purchase Request: 7015954840QTY: 87 Delivery: 171 days ADO